Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Performance of a high-work low aspect ration turbine tested with a realistic inlet radial temperature profile

Experimental results are presented for a 0.767 scale model of the first stage of a two-stage turbine designed for a high by-pass ratio engine. The turbine was tested with both uniform inlet conditions and with an inlet radial temperature profile simulating engine conditions. The inlet temperature profile was essentially mixed-out in the rotor. There was also substantial underturning of the exit flow at the mean diameter. Both of these effects were attributed to strong secondary flows in the rotor blading. There were no significant differences in the stage performance with either inlet condition when differences in tip clearance were considered. Performance was very close to design intent in both cases.

Stabe, R. G.↗

Temperature and humidity profiles in the atmosphere from spaceborne lasers: A feasibility study

Computer simulations of the differential absorption lidar technique in a space craft for the purpose of temperature and humidity profiling indicate: (1) Current technology applied to O2 and H2O lines in the .7 to .8 micrometers wavelength band gives sufficiently high signal-to-noise ratios (up to 50 for a single pulse pair) if backscattering by aerosol particles is high, i.e. profiling accurate to 2 K for temperature and 10% for humidity should be feasible within the turbid lower troposphere in 1 km layers and with an averaging over approximately 100 pulses. (2) The impact of short term fluctuations in aerosol particle concentration is too big for a one laser system. Only a two laser system firing at a time lag of about 1 millisecond can surmount these difficulties. (3) The finite width of the laser line and the quasi-random shift of this line introduce tolerable, partly systematic errors.

Grassl, H.↗

Retrieval of vertical moisture profiles with microwave radiometry

A statistical correlation technique is applied to the retrieval of vertical moisture profiles from downlooking radiometric measurements of atmospheric radiation at microwave wavelengths. Only an optimum subset of available radiometer channels is selected for estimating water vapor at specific pressure levels. To test its validity the algorithm was applied, in a numerical experiment, to 50 independent tropical radiosondes over a sea surface. It was also used to retrieve continuous sequences of atmospheric moisture profiles from a set of data obtained with a 4-channel microwave radiometer carried aboard an aircraft over a land surface.

Kakar, R. K.↗

Stratospheric temperature profile from balloon-borne measurements of the 10.4-micron band of CO2

The technique of nonlinear least squares spectral curve fitting has been used to derive the stratospheric vertical temperature profile from balloon-borne measurements of the 10.4 micron band of CO2. The spectral data were obtained at sunset with the approximately 0.02 per cm resolution University of Denver interferometer system from a float altitude of 33.5 km near Alamogordo, New Mexico, on 23 March 1981. The r.m.s. deviation between the retrieved temperature profile and correlative radiosonde measurements is 2.2 K.

Rinsland, C. P.↗

Mg II profile variations of Zeta Aurigae

Variations in the Mg II 2800-A doublet of Zeta Aurigae have been observed. The Mg II profiles deviate from simple P-Cygni profiles in that they exhibit an absorption feature consistent with Chapman's (1981) interpretation of C IV absorption as evidence of a column of accretion onto the B-star component of the binary. The opening angle of the shock cone containing the accretion column is found to exceed 16 deg, implying a stellar wind velocity of approximately 67 km/s, unless the H II region temperature is unusually high. The turbulence velocity of the wind then appears to be about 33 km/s, compared to values of order 10 km/s previously determined closer to the K-star surface.

Ahmad, I. A.↗

The stability of coronal loops - Finite-length and pressure-profile limits

Results are described from a quickly converging, necessary-and-sufficient, MHD-stability test for coronal-loop models. The primary stabilizing influence arises from magnetic line tying at the photosphere, and this end conditions requires a series expansion of possible loop excitations. The stability boundary is shown to quickly approach a limit as the number of terms increases, providing a critical length for the loop in proportion to its transverse magnetic scale. Several models of force-free-field profiles are tested and the stability behavior of a localized current channel, embedded in an external current-free region, is shown to be superior to that of other, broader, current profiles. Pressure-gradient effects, leading to increased or decreased stability, are shown to be amplified by line tying. Long loops must either conduct low net current, or exhibit an axial-field reversal coexisting with a low-pressure core. The limits on stability depend on the magnetic aspect ratio, the plasma-to-magnetic pressure ratio, and the field orientation at the loop edge. Applications of these results to the structure of coronal loops are described.

Einaudi, G.↗

Differential absorption lidar technique for measurement of the atmospheric pressure profile

A new two-wavelength lidar technique for remotely measuring the pressure profile using the trough absorption region between two strong lines in the oxygen A band is described. The theory of integrated vertical path, differential ranging, and horizontal-path pressure measurements is given, with methods to desensitize and correct for temperature effects. The properties of absorption troughs are described and shown to reduce errors due to laser frequency jitter by up to two orders of magnitude. A general analysis, including laser bandwidth effects, demonstrates that pressure measurements with an integrated-vertical-path technique are typically fifty times more accurate than with a differential ranging technique. Simulations show 0.1-0.3 percent accuracy for ground and Shuttle-based pressure-profile and surface-pressure experiments.

Korb, C. L.↗

The rings of Uranus - Occultation profiles from three observatories

Occultation profiles for the nine confirmed Uranian rings obtained from Las Campanas, the European Southern Observatory, and Cerro Tololo on 15-16 August 1980 are compared. The alpha ring shows a 'double-dip' structure; the eta ring shows a broad and narrow component (similar to Saturn's F ring); and the epsilon ring shows six features that appear in the data from all three observatories. Diffraction fringes appear at the edges of several of the occultation profiles.

Elias, J. H.↗

Low altitude wind shear statistics derived from measured and FAA proposed standard wind profiles

Wind shear statistics were calculated for a simulated data set using wind profiles proposed as a standard and compared to statistics derived from measured wind profile data. Wind shear values were grouped in altitude bands of 100 ft between 100 and 1400 ft, and in wind shear increments of 0.025 kt/ft between + or - 0.600 kt/ft for the simulated data set and between + or - 0.200 kt/ft for the measured set. No values existed outside the + or - 0.200 kt/ft boundaries for the measured data. Frequency distributions, means, and standard deviations were derived for each altitude band for both data sets, and compared. Also, frequency distributions were derived for the total sample for both data sets and compared. Frequency of occurrence of a given wind shear was about the same for both data sets for wind shears, but less than + or 0.10 kt/ft, but the simulated data set had larger values outside these boundaries. Neglecting the vertical wind component did not significantly affect the statistics for these data sets. The frequency of occurrence of wind shears for the flight measured data was essentially the same for each altitude band and the total sample, but the simulated data distributions were different for each altitude band. The larger wind shears for the flight measured data were found to have short durations.

Dunham, R. E., Jr.↗

Performance of a high-work low aspect ratio turbine tested with a realistic inlet radial temperature profile

Experimental results are presented for a 0.767 scale model of the first stage of a two-stage turbine designed for a high by-pass ratio engine. The turbine was tested with both uniform inlet conditions and with an inlet radial temperature profile simulating engine conditions. The inlet temperature profile was essentially mixed-out in the rotor. There was also substantial underturning of the exit flow at the mean diameter. Both of these effects were attributed to strong secondary flows in the rotor blading. There were no significant differences in the stage performance with either inlet condition when differences in tip clearance were considered. Performance was very close to design intent in both cases. Previously announced in STAR as N84-24589

Stabe, R. G.↗

Oceanographic biooptical profiling system

A new oceanographic instrument to measure underwater optical, biological, and physical properties has been designed, built, and used extensively at sea. The new instrument system is a significant advance that permits optimum sampling strategies using ship, aircraft, and satellite optical sensors for ocean research. The design criteria for the biooptical profiling system included the rapid acquisition of data to accommodate shipboard synoptic sampling; the measurement of the necessary parameters for providing appropriate contemporaneous surface data for remote sensors; the compatibility of the data acquisition system with conventional conductivity temperature depth-type cables and winches on the oceanographic fleet; the capability of real-time display of data along with rapid preliminary data reduction at sea. The primary instrument package in this profiling system is a new microprocessor controlled multiwavelength spectroradiometer. A description of the instrument and examples of data are presented.

Smith, R. C.↗

Line profile variation in delta-Orionis A, l-Orionis A, and 15 Monocerotis

The results of a monitoring program with IUE and Einstein are presented for three stars, delta-Ori A, l-Ori A, and 15 Mon. Line profile variability is observed in the UV profiles accessible to IUE and the relation between the variation in the different ions suggests that the ionization level is varying in the winds of these stars. This is consistent with Einstein observations of soft X-ray variability for two of the stars.

Grady, C. A.↗

Flow rates and pressure profiles for one to four axially alined Borda inlets

Choked flow rate and pressure profile data were taken on sequential, axially alined inlets of the Borda type. The configurations consisted of two to four inlets spaced 0.8 and 30 diameters apart. At a spacing of 30 diameters the reduced flow rate appeared to follow the simple empirical relation G sub r/G sub r,1=N(-b), where G sub r,1 is the reduced flow rate for a single inlet; N is the number of inlets; and b, which is weakly temperature dependent, is approximately 0.4. The relation is in reasonable agreement with an analysis of the N-inlet configuration. At a spacing of 30 diameters the pressure profiles dropped sharply at the entrance and partially recovered within each inlet somewhat independently of N. Jetting through the last Borda was common at low temperatures. At a spacing of 0.8 diameter fluid jetting was prevalent at low temperatures for each configuration studied and flow rates were the same as that for a single inlet.

Hendricks, R. C.↗

Extreme Limb Profiles of the Sun at Far Infrared and Submillimeter Wavelengths

Limb intensity profiles at 30, 50, 100, and 200 microns, determined from Kuiper airborne observatory (KAO) observations of the occultation of the solar limb during the total eclipse of July 31, 1981, are presented. Significant but gradual limb brightening was found at the longer wavelengths consistent with the 6000 K temperature-plateau structure of the model chromospheres of Vernazza, Avrett, and Loeser. The 100 and 200 micrometers limbs are extended significantly further above the visible limb than the Vernazza, Avrett, and Loeser model predicts. These results show that the solar chromosphere is strongly perturbed from gravitational-hydrostatic equilibrium to heights as low as 1000 km. These profiles can serve as a powerful diagnostic for modeling the temperature and density of chromospheric structure free from the assumption of gravitational-hydrostatic equilibrium.

Becklin, E. E.↗

Be-10 and Cl-36 depth profiles in an Apollo 15 drill core

The present study of galactic cosmic ray production profiles by means of tandem accelerator mass spectrometry has measured cosmic ray-produced Be-10 and Cl-36, whose half-attenuation lengths are respectively calculated to be 120 and 132 g/sq cm. The measured half-attenuation lengths for Be-10 are noted to be slightly longer than predicted by the Reedy-Arnold (1972) theoretical model. Secondary thermal neutron production from Cl-35 is invoked as an explanation for the flatter and deeper maximum seen in the Cl-36 profile.

Nishiizumi, K.↗

Stratospheric HF mixing ratio profiles in the northern and southern hemispheres

Spectra obtained by balloon-borne Michelson interferometers over South Australia in 1977 and New Mexico in 1978 have been analyzed to obtain HF mixing ratios using a recently developed, sensitive analysis method for Fourier transform spectroscopy. The stratospheric HF mixing ratio appears to be significantly larger in the northern hemisphere than in the southern hemisphere for similar respective latitudes with the profiles having a similar vertical shape: the HF mixing ratio increases from 20 to 25 km, stays approximately constant between 25 and 35 km, and increases upward from 35 km. A brief discussion is given of possible causes for HF profile shape.

Park, J. H.↗

Brackett-alpha line profiles of young stellar objects

Profiles of the Br-alpha line of H I at a velocity resolution of 45 km/s are presented for the compact imbedded infrared objects BN, S106/IRS 3, GLS 490, GL 961, GL 989, Mon. R2/IRS 2, and for the visible objects LkH-alpha 101, T Tau, and R Mon. A proportionality obtained between Br-alpha luminosity and bolometric luminosity is shown to extend over three orders of magnitude, supporting the idea that the physical conditions and gas motions in the circumstellar envelopes of stellar objects are closely related over a wide range of luminosities. The Br-alpha line strengths are compared to radio continuum flux densities in the context of stellar wind models. Momentum deposition rates deduced from Br-alpha or radio continuum fluxes are consistent with those available in the radiation fields, which appear capable of driving the ionized gas outflows in the vicinity of the core sources. The results of a comparison of the H-alpha and Br-alpha profiles for T Tau are discussed.

Persson, S. E.↗

The radial X-ray brightness profile of the Coma cluster

Radial brightness profiles of the Coma cluster of galaxies in the 0.15-4.0 keV X-ray band are presented, along both major and minor axes, from data obtained with the Einstein Observatory imaging proportional counter. These are compared to various theoretical brightness distributions predicted by Strimpel and Binney (1979), after the predictions have been modified to take into account the varying energy response and finite spatial resolution of the instrument. The observed profiles are closest to the isothermal oblate model of Strimpel and Binney (although there are some systematic differences), and may therefore lend support to 'pancake' theories of cluster origin. Possible sources for the systematic differences are discussed. The present study also suggests how improved modeling could make possible a more definitive oblate-versus-prolate test, even in the absence of additional data.

Chanan, G. A.↗