Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Productivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Highly selective and productive reduction of carbon dioxide to multicarbon products via in situ CO management using segmented tandem electrodes

Electrochemical CO 2 reduction provides a promising route to the sustainable generation of valuable chemicals and fuels. Tandem catalysts enable sequential CO 2 -to-CO and CO-to-multicarbon (C 2+ ) product conversions on complementary active sites, to produce high C 2+ Faradaic efficiency (FE). Unfortunately, previous tandem catalysts exhibit poor management of CO intermediates, which diminishes C 2+ FE. Here, we design segmented gas-diffusion electrodes (s-GDEs) in which a CO-selective catalyst layer (CL) segment at the inlet prolongs CO residence time in the subsequent C 2+ -selective segment, enhancing conversion. This phenomenon enables increases in both the CO utilization and C 2+ current density for a Cu/Ag s-GDE compared to pure Cu, by increasing the *CO coverage within the Cu CL. Lastly, we develop a Cu/Fe-N-C s-GDE with 90% C 2+ FE at C 2+ partial current density (j C2+ ) exceeding 1 A cm -2 . These results prove the importance of transport and establish design principles to improve C 2+ FE and j C2+ in tandem CO 2 reduction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Neutron production using a pyroelectric driven target coupled with a gated field ionization source

A palm sized, portable neutron source would be useful for widespread implementation of detection systems for shielded, special nuclear material. We present progress towards the development of the components for an ultracompact neutron generator using a pulsed, meso-scale field ionization source, a deuterated (or tritiated) titanium target driven by a negative high voltage lithium tantalate crystal. Neutron production from integrated tests using an ion source with a single, biased tungsten tip and a 3 Multiplication-Sign 1 cm, vacuum insulated crystal with a plastic deuterated target are presented. Component testing of the ion source with a single tip produces up to 3 nA of current. Dielectric insulation of the lithium tantalate crystals appears to reduce flashover, which should improve the robustness. The field emission losses from a 3 cm diameter crystal with a plastic target and 6 cm diameter crystal with a metal target are compared.

43 PARTICLE ACCELERATORS↗

Lithium pellet production (LiPP): A device for the production of small spheres of lithium

With lithium as a fusion material gaining popularity, a method for producing lithium pellets relatively quickly has been developed for NSTX. The Lithium Pellet Production device is based on an injector with a sub-millimeter diameter orifice and relies on a jet of liquid lithium breaking apart into small spheres via the Plateau-Rayleigh instability. A prototype device is presented in this paper and for a pressure difference of {Delta}P= 5 Torr, spheres with diameters between 0.91 < D < 1.37 mm have been produced with an average diameter of D= 1.14 mm, which agrees with the developed theory. Successive tests performed at Princeton Plasma Physics Laboratory with Wood's metal have confirmed the dependence of sphere diameter on pressure difference as predicted.

36 MATERIALS SCIENCE↗

Fusion power production in International Thermonuclear Experimental Reactor baseline H-mode scenarios

Self-consistent simulations of 15 MA ITER H-mode DT scenarios, from ramp-up through flat-top, are carried out. Electron and ion temperatures, toroidal angular frequency, and currents are evolved, in simulations carried out using the predictive TRANSPort and integrated modeling code starting with initial profiles and equilibria obtained from tokamak simulation code studies. Studies are carried out examining the dependence and sensitivity of fusion power production on electron density, argon impurity concentration, choice of radio frequency heating, pedestal temperature without and with E × B flow shear effects included, and the degree of plasma rotation. The goal of these whole-device ITER simulations is to identify dependencies that might impact ITER fusion performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and construction of a cascading pressure reactor prototype for solar-thermochemical hydrogen production

Recent work regarding the efficiency maximization for solar thermochemical fuel production in two step cycles has led to the design of a new type of reactor—the cascading pressure reactor—in which the thermal reduction step of the cycle is completed in multiple stages, at successively lower pressures. This approach enables lower thermal reduction pressures than in single-staged reactors, and decreases required pump work, leading to increased solar to fuel efficiencies. In this work we report on the design and construction of a prototype cascading pressure reactor and testing of some of the key components. We specifically focus on the technical challenges particular to the design, and their solutions.

14 SOLAR ENERGY↗

Optimization of laser-target parameters for the production of stable lithium beam

A laser ion source coupled with a radio frequency quadrupole linac accelerator is being proposed as a suitable system for the production of a low energy, high-current stable lithium beam. In order to maximize the lithium yield, plasmas generated by laser ablation of different materials based on lithium (Li, LiOH, and LiNbO3) have been characterized by using a Faraday cup and an electrostatic ion analyzer in the time of flight configuration. A wide range of laser power density has been investigated (109–1012 W/cm2) using two Nd:YAG lasers operating at different wavelengths (1064 nm and 532 nm), pulse durations (6 ns and 17 ns), and maximum energies (1400 mJ and 210 mJ). This paper outlines the pros and cons of the investigated materials by studying how the ion energy, yields, and charge state distributions are modified when the laser power density is changed. Considerable attention has been paid to the higher charge states of oxygen, which may occur with the same mass-to-charge ratio of Li3+. The analysis has evidenced that LiNbO3 represents a valid target since it allows minimizing the O6+/7Li3+ ratio down to 2.5% by using a laser power density of 1.8 × 1010 W/cm2. For such a condition, a Li3+ current of 1.4 mA/cm2 has been measured.

Cannavò, A. (ORCID:0000000309759630)↗

Dissociative recombination of CH{sub 5}{sup +} and CD{sub 5}{sup +}: Measurement of the product branching fractions and the absolute cross sections, and the breakup dynamics in the CH{sub 3}+H+H product channel

The dissociative recombination (DR) of CH{sub 5}{sup +} and CD{sub 5}{sup +} has been studied at the heavy-ion storage ring CRYRING. The fragmentation dynamics of the dominant reaction channel CH{sub 3}+H+H has been investigated using an imaging detector. The results indicate that a two-step process via the production of a CH{sub 4} intermediate, which has sufficient energy to fragment further to CH{sub 3}+H, may play an important role. Discrepancies between the present and earlier results obtained from storage ring measurements with those from flowing afterglow experiments are addressed. Newly measured branching fractions in the DR of CD{sub 5}{sup +} show an excellent agreement with branching fractions previously measured for CH{sub 5}{sup +}, and the absolute DR cross sections have been also measured over an interaction energy range between {approx}0 and 0.1 eV for both isotopologs.

74 ATOMIC AND MOLECULAR PHYSICS↗

Production of Λ 0 , Λ̄ 0 , Ξ ± , and Ω ± hyperons in pp̄ collisions at √s=1.96 TeV

We report a set of measurements of inclusive invariant p T differential cross sections of Λ 0 , Λ̄ 0 , Ξ ± , and Ω ± hyperons reconstructed in the central region with pseudorapidity |η|<1 and p T up to 10 GeV/c. Events are collected with a minimum-bias trigger in pp̄ collisions at a center-of-mass energy of 1.96 TeV using the CDF II detector at the Tevatron Collider. As p T increases, the slopes of the differential cross sections of the three particles are similar, which could indicate a universality of the particle production in p T . The invariant differential cross sections are also presented for different charged-particle multiplicity intervals.

Aaltonen, T.↗

Search for Higgs boson production in oppositely charged dilepton and missing energy events in pp̄ collisions at √s=1.96 TeV

We present a search for the standard model Higgs boson using events with two oppositely charged leptons and large missing transverse energy as expected in H→WW decays. The events are selected from data corresponding to 8.6 fb⁻¹ of integrated luminosity in pp̄ collisions at √s=1.96 TeV collected with the D0 detector at the Fermilab Tevatron Collider. No significant excess above the standard model background expectation in the Higgs boson mass range this search is sensitive to is observed, and upper limits on the Higgs boson production cross section are derived.

Abazov, V. M.↗