Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Perturbative methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Special cases of friction and applications

Two techniques for reducing friction forces are presented. The techniques are applied to the generalized problem of reducing the friction between kinematic pairs which connect a moveable link to a frame. The basic principles are: (1) Let the moveable link be supported by two bearings where the relative velocities of the link with respect to each bearing are of opposite directions. Thus the resultant force (torque) of friction acting on the link due to the bearings is approximately zero. Then, additional perturbation of motion parallel to the main motion of the moveable link will require only a very small force; (2) Let the perturbation in motion be perpendicular to the main motion. Equations are developed which explain these two methods. The results are discussed in relation to friction in geared couplings, gyroscope gimbal bearings and a rotary conveyor system. Design examples are presented.

Litvin, F. L.↗

Reconstruction of a three-dimensional, transonic rotor flow field from holographic interferogram data

Holographic interferometry and computer-assisted tomography (CAT) are used to determine the transonic velocity field of a model rotor blade in hover. A pulsed ruby laser recorded 40 interferograms with a 2-ft-diam view field near the model rotor-blade tip operating at a tip Mach number of 0.90. After digitizing the interferograms and extracting fringe-order functions, the data are transferred to a CAT code. The CAT code then calculates the perturbation velocity in several planes above the blade surface. The value from the holography-CAT method compare favorably with previously obtained numerical computations in most locations near the blade tip. The results demonstrate the technique's potential for three-dimensional transonic rotor flow studies.

Yu, Y. H.↗

Reconstruction of a three-dimensional, transonic rotor flow field from holographic interferogram data

Holographic interferometry and computerized aided tomography (CAT) are used to determine the transonic velocity field of a model rotor blade in hover. A pulsed ruby laser recorded 40 interferograms with a 2 ft dia view field near the model rotor blade tip operating at a tip Mach number of 0.90. After digitizing the interferograms and extracting the fringe order functions, the data are transferred to a CAT code. The CAT code then calculates the perturbation velocity in several planes above the blade surface. The values from the holography-CAT method compare favorably with previously obtained numerical computations in most locations near the blade tip. The results demonstrate the technique's potential for three dimensional transonic rotor flow studies.

Kittleson, John K.↗

Passivity In Analysis Of Robustness Of A Control System

Robustness margin (measure of degree of passivity) defined. Paper presents new approach to analysis of stability of multivariable feedforward-and-feedback control system consisting of exponentially stable linear time-invariant (LTI) feedforward subsystem and nonlinear time-varying (NTV) or dynamic feedback subsystem. New method based on notion of passivity, quantified by robustness margin. Margin provides bound on magnitudes of perturbations, below which perturbations will not make system unstable.

Wen, John Ting-Yung↗

Electrodynamic tether system study: Extended study

This document is the final report of a study performed by Ball Space Systems Division (BSSD) for the NASA Johnson Space Center under an extension to contract NAS9-17666. The tasks for the extended study were as follows: (1) Define an interface between the Electrodynamic Tether System (ETS) and the Space Station (SS); (2) Identify growth paths for the 100 kW ETS defined in the original study to a 200 kW level of performance; (3) Quantify orbit perturbations caused by cyclic day/night operations of a Plasma Motor/Generator (PMG) on the SS and explore methods of minimizing these effects; (4) Define the analyses, precursor technology, ground tests, and precursor demonstrations leading up to a demonstration mission for an electrodynamic tether system that would be capable of producing maneuvering thrust levels of 25 newtons; and (5) Propose a development schedule for the demonstration mission and preliminary cost estimates.

Source record↗

The C2 Ballik-Ramsay transitions in carbon stars

The bands of C2 are an important source of opacity in the near-infrared spectral region of carbon stars. In the 2 micron spectral region, the Delta v = -1 and -2 transitions of the Ballik-Ramsay b 3Sigma(g)(-) - a 3Pi(u) system are especially important. A general method for calculating highly accurate transition parameters of the Ballik-Ramsay band is presented. This method allows the easy calculation of the satellite lines and the forbidden lines resulting from the perturbation of the upper b 3Sigma(g)(-) state by the X 1Sigma(0)(+) state. Included in the calculation is the effect of the isotopic molecules (C-12)2, (C-12)(C-13), and (C-13)2. Three consistency tests of the calculated strengths are presented. A comparison of synthetic spectra is made with an observed spectrum of WZ Cas in the 3940/cm spectral region.

Goorvitch, David↗

Method for calculating and observing microwave absorption by a sphere in a single mode rectangular cavity

A new theory of microwave absorption by a lossy dielectric sphere in a single mode rectangular cavity has been recently developed. The absorption was treated in the framework of an electromagnetic scattering problem. That theory is summarized here and calculated results that bear on optimizing the processing of materials are illustrated. Methods for observing power absorption and other results predicted by the scattering model are discussed. Cavity perturbation theory provides a bridge between theoretical calculations and experimental observations, and a special problem that arises when an established version of cavity perturbation theory is applied to spheres is identified, analyzed, and resolved. The direct problem of predicting shifts in frequency and Q from model calculations is discussed for a sphere in a cavity when the sphere's complex dielectric constant is known. Also, the inverse problem of determining the complex dielectric constants from measured values of those shifts is considered. The small sphere limit, where an electrostatic or quasistatic model is valid, is treated in detail, and planned work on parallel problems for larger spheres is described.

Jackson, H. W.↗

The reaction Cl + H2CO yields HCl + HCO: Decreased sensitivity of stratospheric ozone to chlorine perturbations

The absolute rate constant for the reaction Cl + H2CO yields HCl + HCO has been determined by the flash-photolysis-resonance fluorescence method to be + or - 0.9 (2 sigma) x 10 to the -11th power cu cm/molecule per sec at 298 K and to have a negligible temperature dependence. This rate, which at stratospheric temperatures is more than 2000 times faster than the rate of Cl + CH4 and more than a factor of 2 faster than Cl + HO2, indicates that formaldehyde (H2CO) will compete significantly with methane (CH4) and HO2 for the conversion of active chlorine in the stratosphere to the inactive reservoir HCl. Chlorine will thus be a less efficient destroyer of stratospheric ozone than previously believed. One-dimensional eddy-diffusion photochemical model calculations indicate that the eventual ozone depletion for a steady-state chlorfluoromethane release at 1975 rates (750,000 tons/year) will be lowered from 20% to 18.5% by the inclusion of this reaction.

Stief, L. J.↗

Numerical methods for stiff systems of two-point boundary value problems

Numerical procedures are developed for constructing asymptotic solutions of certain nonlinear singularly perturbed vector two-point boundary value problems having boundary layers at one or both endpoints. The asymptotic approximations are generated numerically and can either be used as is or to furnish a general purpose two-point boundary value code with an initial approximation and the nonuniform computational mesh needed for such problems. The procedures are applied to a model problem that has multiple solutions and to problems describing the deformation of thin nonlinear elastic beam that is resting on an elastic foundation.

Flaherty, J. E.↗

Hydrogen masers with cavity frequency switching servos

The stability of the free-running hydrogen maser is limited by pulling of the unperturbed hydrogen transition frequency due to instability of the cavity resonance frequency. While automatic spin-exchange tuning is in principle the more basic and accurate method, the required beam intensity switching and the long servo time constant result in reduced stability for measuring intervals up to 10(exp 6) seconds. More importantly, the spin-exchange tuning method requires a second stable frequency source as a reference, ideally a second hydrogen maser, to get the best results. The cavity frequency switching servo, on the other hand, has very little effect on the maser short term stability, and is fast enough to correct for cavity drift while maintaining the cavity at the spin-exchange tuned offset required to minimize instability due to beam intensity fluctuations. Not only does the cavity frequency switching servo not require a second stable frequency source, but the frequency reference is the atomic hydrogen radiated beam signal, so that no extra RF connections need be made to the cavity, and externally generated signals that would perturb the hydrogen atom need not be transmitted through the cavity. The operation of the cavity frequency switching stabilization method is discussed and the transient response of the servo and certain other aspects of the technique that have potential for achieving improved basic accuracy are illustrated.

Peters, Harry E.↗

Tidal parameters from the variation of inclination of GEOS-1 and GEOS-2

Analysis of the luni-solar tidal perturbations of the inclination of GEOS-1 and GEOS-2 has yielded the values 0.22 and 0.31 respectively for the apparent second degree Love number. For GEOS-1 a new purely numerical method involving osculating elements was employed. For GEOS-2 it was necessary to analyze the variations of the mean elements because of the very long period (450 days) of the dominant solar tidal perturbation. The disparate values indicate that the simple second degree zonal harmonic model of the tidal potential is accommodating other effects in addition to those caused by the solid earth tides. A recent paper by Lambeck et al. (1973) indicates that ocean tide effects have significant perturbations on satellite orbits and cannot be neglected.

Douglas, B. C.↗

The Restricted Three-Body-Problem as a Perturbation of Euler's Problem of Two Fixed Centers and Its Application to Lunar Trajectories

The restricted Three-Body-Problem considers the motion of an infinitesimal mass under the gravitational attraction of two finite masses, which revolve about their common center of gravity in coplanar circles. It is well known that Euler's problem of two fixed centers, consisting of the motion of an infinitesimal mass under the gravitational attraction of two finite masses fixed in space, can be solved by elliptic functions. The idea presented here is to take the solution of Euler's problem as the solution of the restricted Three-Body-Problem by allowing the initial values to be functions of time now. Differential equations for the perturbed initial values are established. These equations can be given in closed form by using the fact that the transformation to the perturbed initial values of Euler's problem is canonical. Thus, an approximation can be obtained for the solution of the restricted Three-Body-Problem. The method can also be used to represent classes of neighboring trajectories for guidance purposes.

Euler equation↗

Thermophysical properties of simple liquid metals: A brief review of theory

In this paper, we review the current theory of the thermophysical properties of simple liquid metals. The emphasis is on thermodynamic properties, but we also briefly discuss the nonequilibrium properties of liquid metals. We begin by defining a 'simple liquid metal' as one in which the valence electrons interact only weakly with the ionic cores, so that the interaction can be treated by perturbation theory. We then write down the equilibrium Hamiltonian of a liquid metal as a sum of five terms: the bare ion-ion interaction, the electron-electron interaction, the bare electron-ion interaction, and the kinetic energies of electrons and ions. Since the electron-ion interaction can be treated by perturbation, the electronic part contributes in two ways to the Helmholtz free energy: it gives a density-dependent term which is independent of the arrangement of ions, and it acts to screen the ion-ion interaction, giving rise to effective ion-ion pair potentials which are density-dependent, in general. After sketching the form of a typical pair potential, we briefly enumerate some methods for calculating the ionic distribution function and hence the Helmholtz free energy of the liquid: monte Carlo simulations, molecular dynamics simulations, and thermodynamic perturbation theory. The final result is a general expression for the Helmholtz free energy of the liquid metal. It can be used to calculate a wide range of thermodynamic properties of simple metal liquids, which we enumerate. They include not only a range of thermodynamic coefficients of both metals and alloys, but also many aspects of the phase diagram, including freezing curves of pure elements and phase diagrams of liquid alloys (including liquidus and solidus curves). We briefly mention some key discoveries resulting from previous applications of this method, and point out that the same methods work for other materials not normally considered to be liquid metals (such as colloidal suspensions, in which the suspended microspheres behave like ions screened by the salt solution in which they are suspended). We conclude with a brief discussion of some non-equilibrium (i.e., transport) properties which can be treated by an extension of these methods. These include electrical resistivity, thermal conductivity, viscosity, atomic self-diffusion coefficients, concentration diffusion coefficients in alloys, surface tension and thermal emissivity. Finally, we briefly mention two methods by which the theory might be extended to non-simple liquid metals: these are empirical techniques (i.e., empirical two- and three-body potentials), and numerical many-body approaches. Both may be potentially applicable to extremely complex systems, such as nonstoichiometric liquid semiconductor alloys.

Stroud, David↗

Methods for Passive Optical Detection and Relative Navigation for Rendezvous with a Non-Cooperative Object at Mars

Long-range passive optical detection of an orbiting inert sphere by a robotic Mars orbiter is investigated and trades are described in terms of detectability via reflected visible light in the presence of orbit uncertainty, gravitational perturbations, and camera electronics noise. A new approximate equation for signal-tonoise ratio (SNR) is developed to include most relevant camera imperfections, diffraction, and stray light from the Mars limb as relevant to this scenario. Using this method, a notional camera suite is designed to meet detection, navigation, and redundancy requirements for an example mission scenario. Results from a simulation tool demonstrate the long-range initial detection strategy in the presence of perturbations from various sources. Finally, navigation analysis shows that the information gathered using passive optical detection is sufficient to begin orbit matching.

Woolley, Ryan C.↗

Transonic assessment of two-dimensional wind tunnel wall interference using measured wall pressures

A method is described for assessing wall interference in two dimensional wind tunnels with better realism and accuracy than is achieved with methods based on classical wall interference theory. Measured pressure distributions were imposed as boundary conditions on a nonlinear transonic form of the potential equation to obtain an accurate computational reproduction of the actual tunnel flow. Wall-induced velocity perturbations were then extracted to yield both corrections to the tunnel test conditions and a measure of the adequacy of these corrections to account for tunnel interference. Application of the method to a transonic tunnel with variable porosity walls is illustrated.

Kemp, W. B., Jr.↗

Computational tests of angular momentum decoupling approximations for pressure broadening cross sections

The utility of several approximate scattering methods for predicting collision induced spectral pressure broadening has been tested by comparison with accurate close coupling results. In particular, broadening of the pure rotational spectra of HD, HCl, CO, and HCN - all perturbed by low energy collisions with He atoms - has been computed using the effective potential formalism of Rabitz, the decoupled l-dominant approximation of DePristo and Alexander, and the j(2)-conserving coupled states method of McGuire and Kouri. For this last method, pressure broadening cross sections have been obtained with the new, correct expression recently derived by Goldflam and Kouri as well as with an earlier formalism based on an incorrect labeling of the scattering matrices. These methods were found to be generally diasppointing for predicting pressure broadening with the exception of the new, correctly formulated j(2)-conserving coupled states method which was found to agree quantitatively (better than 5%) with close coupling values for all cases studied.

Green, S.↗