Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electronic impact of Ni2P nanoparticle size on hydrogenation rates

Nickle phosphide, Ni2P, nanoparticles supported on SiO2 show a marked volcano shaped size dependence. Kinetic analysis and physicochemical characterization shows the electron density of Ni to increase with increasing Ni2P size, enhancing in turn the H2 adsorption strength. For particles below 15 nm, H adsorbs weakly causing a low surface coverage of H, gradually increasing with particle size. For large particles, hydrogen binds too strongly causing a high coverage but low catalytic activity. The remarkable size dependence of the electronic properties show that Ni2P particle size can be used to fine-tune its activity for hydrogenation.

Ni2P size effect, Electron density, H2 adsorption ↗
DOE OSTI2026

Removal of trace gases can both increase and decrease cloud droplet formation

Aerosols consist of liquid or solid particles dispersed in a gas. Aerosol measurements generally rely on drying the particles before quantifying their physicochemical properties. This drying can potentially remove semivolatile compounds from the particles. Here, we show size-resolved cloud condensation nuclei (CCN) measurements quantifying the hygroscopicity parameter in the presence and absence of a denuder. The denuder efficiently removed alkanes and weakly functionalized acids, aldehydes, and alcohols with fewer than 10 carbon atoms from the gas phase. Denuding organic compounds perturbed the CCN-derived hygroscopicity parameter by up to 50%. Denuding either rendered the particles more or less CCN active, and the direction of the effect depended on sample relative humidity and trace gas concentration. The effect was weakest in early spring and strongest in late spring and summer. The measurements demonstrate an unexpectedly strong coupling between the particle and gas phase, influencing CCN activity through either volatilization or surface adsorption, or both.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

KAZR Hydrometeor and Insect Masks

The Ka-band ARM zenith pointing radar (aka, KAZR) is so sensitive that it detects cloud particles and individual insects. While detecting insects with Ka-band radar is beneficial and desirable to advance radar entomology, this sensitivity can be detrimental to radar meteorology because insects could be interpreted as clouds or precipitation. For example, misclassifying insects as clouds has been a problem for the ARM Active Remote Sensing of Clouds (ARSCL) Value Added Product since its inception (Clothiaux et al. 2000). Based on cloud particle and insect radar scattering properties, an algorithm was developed that identifies clouds, raindrops, ice particles, and insects in KAZR co- and cross-polarimeteric Doppler velocity spectra. The algorithm produces affirmative masks in the KAZR native time and height resolution indicating time-height locations of hydrometeors and insects. The hydrometeor mask contains binary information (e.g., yes/no hydrometeor presence), and the insect mask includes a proxy for insect activity that increases when more insects are detected in the Doppler velocity spectra. The algorithm was developed using KAZR medium sensitivity mode (MD) observations and was applied to two summer seasons of KAZR observations at the Southern Great Plains (SGP) Central Facility: May-October 2018 and 2019. In the future, this data set will be expanded to include other KAZR operating modes and observations from other ARM field sites. Details of the algorithm and data set can be found in: Williams, C.R., K.L. Johnson, S.E. Giangrande, J. C. Hardin, R. Oktem, and D. M. Romps, 2021: Identifying Insects, Clouds, and Precipitation using Vertically Pointing Polarimetric Radar Doppler Velocity Spectra. Atmospheric Measurement Techniques, submitted 6-Feb-2021. https://amt.copernicus.org/preprints/amt-2021-27/#discussion.For more information on the ARSCL VAP, see Clothiaux, E. E., T. P. Ackerman, G. G. Mace, K. P. Moran, R. T. Marchand, M. A. Miller, and B. E. Martner, 2000; J. Appl. Meteor., 39, 645-665.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1988

Collecting Hypervelocity Particles Intact

Experiments conducted to develop targets capturing micrometerorites, dust, and other small particles in outer space traveling at speed of several kilometers per second. Principal criterion for such target; must stop particles while preserving mineralogical properties for subsequent analysis. Collection concept simple: foam or other underdense medium used to remove kinetic energy gently from impinging particle. Well-designed collector decelerates and stops particle without imposing stresses beyond critical stresses that damage particle thermally or mechanically. Target technology also useful in terrestrial studies of debris for explosions.

Tsou, Peter↗
NASA NTRS2000

Aerosol-Induced Radiative Flux Changes Off the United States Mid-Atlantic Coast: Comparison of Values Calculated from Sunphotometer and In Situ Data with Those Measured by Airborne Pyranometer

The Tropospheric Aerosol Radiative Forcing Observational Experiment (TARFOX) measured a variety of aerosol radiative effects (including flux changes) while simultaneously measuring the chemical, physical, and optical properties of the responsible aerosol particles. Here we use TARFOX-determined aerosol and surface properties to compute shortwave radiative flux changes for a variety of aerosol situations, with midvisible optical depths ranging from 0.06 to 0.55. We calculate flux changes by several techniques with varying degrees of sophistication, in part to investigate the sensitivity of results to computational approach. We then compare computed flux changes to those determined from aircraft measurements. Calculations using several approaches yield downward and upward flux changes that agree with measurements. The agreement demonstrates closure (i.e. consistency) among the TARFOX-derived aerosol properties, modeling techniques, and radiative flux measurements. Agreement between calculated and measured downward flux changes is best when the aerosols are modeled as moderately absorbing (midvisible single-scattering albedos between about 0.89 and 0.93), in accord with independent measurements of the TARPOX aerosol. The calculated values for instantaneous daytime upwelling flux changes are in the range +14 to +48 W/sq m for midvisible optical depths between 0.2 and 0.55. These values are about 30 to 100 times the global-average direct forcing expected for the global-average sulfate aerosol optical depth of 0.04. The reasons for the larger flux changes in TARFOX include the relatively large optical depths and the focus on cloud-free, daytime conditions over the dark ocean surface. These are the conditions that produce major aerosol radiative forcing events and contribute to any global-average climate effect.

Russell, P. B.↗
NASA NTRS2001

Uncertainties in the Thermal and Mechanical Properties of Particulate Composites Quantified

Particle-reinforced composites are candidate materials for a wide variety of aerospace and nonaerospace applications. The high costs and technical difficulties involved with the use of many fiber-reinforced composites often limit their use in many applications. Consequently, particulate composites have emerged as viable alternatives to conventional fiber-reinforced composites. Particulate composites can be processed to near net shapepotentially reducing the manufacturing costs. They are candidate materials where shock or impact properties are important. For example, particle-reinforced metal matrix composites have shown great potential for many automotive applications. Typically, these materials are aluminum matrix reinforced with SiC or TiC particles. Reinforced concrete can also be thought of as a particle-reinforced composite. In situ ceramics can be modeled as particulate composites and are candidate materials for many high-temperature applications. The characterization of these materials is fundamental to their reliable use. It has been observed that the overall properties of these composites exhibit scatter because of the uncertainty in the constituent material properties, and fabrication-related parameters.

Murthy, Pappu L. N.↗
NASA NTRS2002

Characterization of Polar Mesospheric Clouds Using Infrared Measurements from HALOE

Measurements from the Halogen Occultation Experiment (HALOE) revealed the infrared signature of polar mesospheric clouds (PMCs), for the first time, HALOE PMC observations at eight wavelengths (2.45 - 10 microns) show remarkable agreement with model PMC spectra based on ice particle extinction, and thus provide the first confirmation that water ice is the primary component of PMCs. Because PMCs respond to changes in temperature and water vapor, they are considered an indicator of global climate change. We propose to further the understanding of PMCs using a decade of infrared measurements form HALOE. This effort will characterize PMC spectral properties, extinction profiles, and size distributions. Using this information, HALOE measurements will be used to make simultaneous retrievals of H2O3, and temperature, in the presence of PMCs. The simultaneous retrievals of particle properties, H2O3, and temperature will be used with HALOE NO data to provide a significant step forward in the knowledge of PMC characteristics and formation conditions. We will challenge fundamental theories of PMC formation, and investigate changes in PMC properties and related conditions over the length of the HALOE measurement record. HALOE has been operating without flaw since it was launched on October 11, 1991. Consequently, ten southern and ten northern PMC seasons have been observed thus far, providing a wealth of data for the study of PMC and related parameters.

Hervig, Mark E.↗
DOE OSTI2025

Measurements and Analyses to Enable Science for the Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE)

Coastal cities provide the opportunity to characterize the substantial effects of manmade particles on marine cloud properties and processes. La Jolla lies to the north of San Diego, California, but it is often about a day directly downwind of the major pollution sources located in the ports of Los Angeles and Long Beach. The large dynamic range of aerosol particle concentrations combined with the multi-hour to multi-day persistence of stratocumulus cloud layers makes the site ideal for investigating the seasonal changes in cloud and aerosol properties as well as the quantitative relationships between cloud and aerosol properties. The Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE) characterized the extent, radiative properties, aerosol interactions, and precipitation characteristics of stratocumulus clouds in the Eastern Pacific across all four seasons at two coastal sites in La Jolla. This project was designed to enhance and expand the scientific uses of the ARM AMF1 measurements from EPCAPE. The goal was to ensure meaningful observations were collected that would enable science. The project included the following objectives: (1) Reviewing the ARM AMF1 measurements [ARM, 2021a; b] and circulating a summary of the measurements each week, (2) Comparing AMF1 measurements to those provided by collaborators (including filter measurements at the pier), (3) Collecting and analyzing filter samples from Scripps Pier by Fourier Transform Infrared spectroscopy (FTIR) and X-ray Fluorescence (XRF), (4) Assisting in operations of instruments provided by Guest PIs when possible, and (5) Providing an initial compilation of EPCAPE aerosol and cloud seasonal differences. The expected outcomes of these objectives were enhanced proposals and publications using EPCAPE measurements by helping to identify instrument issues, expanded data access and awareness by distributing weekly plots and related summaries, improved source-related attribution of aerosols with elemental tracers, additional observations provided by Guest PIs, and accelerated ACI studies enabled by the compiled seasonal summaries of aerosol and cloud properties. Three examples of the science enabled by this project are findings that (i) aerosol and cloud aqueous production contributes more than half of sulfate particle mass concentration, (ii) upwind sources make chemical composition very similar at nearby sites despite local differences in meteorology, and (iii) most of the large mass concentration of semi-volatile organic components is co-emitted and co-evaporated with nitrate. Together these findings illustrate how ARM extended field campaigns in coastal regions can be used to constrain ACI processes with direct observations. By using the unique ARM suite of cloud radiative products in addition to the measured aerosol properties at a coastal location, we were able to address the more specific question of which aerosol particles cause how much of the effects on clouds. Identifying this signature in coastal areas provides an opportunity to test the representation of aerosol sources by global models in a range of clean and urban-influenced conditions.

Russell, Lynn [Univ. of California, San Diego, CA ↗
DOE OSTI2025

Implications of Aerosol Physicochemical Properties Including Ice Nucleation at ARM Mega Sites for Improved Understanding of Microphysical Atmospheric Cloud Processes (Final Technical Report)

Continuous, long-term measurements of atmospheric ice-nucleating particles (INPs) that influence clouds and precipitation were conducted to investigate the abundance and variability of ground-level INPs across the world. Three field campaigns were organized by the DOE Atmospheric Radiation Measurement (ARM) program, including Examining INP from Southern Great Plains (ExINP-SGP, 2019), Examining INP from Eastern North Atlantic (ExINP-ENA, 2020 – 2021), and Examining INP from North Slope of Alaska (ExINP-NSA, 2021 – 2024). Additional small-scale supporting field experiments were performed in 2019 and 2021 to collect airborne particulate matter at SGP for complementary laboratory characterization of the particles’ physical and chemical properties [Aerosol-Ice Formation Closure Pilot Study (AEROICESTUDY), 2019; ExINP-SGP II, 2021]. In these studies, the PI’s team measured INP concentration with both real-time and laboratory measurements in a wide range of freezing temperatures ($T$ from 0 °C to about –30 °C). This project elucidated spatial variability and seasonality in the abundance of immersion mode active INPs across three ARM sites using a single instrument, a Portable Ice Nucleation Experiment (PINE) chamber version 03 (PINE-03 hereafter). Collocated aerosol and meteorological data were analyzed to assess the correlation between ambient INP abundance, air mass origin region, and meteorological variability. Our findings suggest very high freezing efficiency of INPs at the NSA site across the measured temperatures (ice nucleation active surface site density, $n_s(T)$, $\approx 2 \times 10^{8} - 10^{10}$ m -2 for from –16 to –31 °C), which is a factor of 10 – 1000 times greater efficiency as compared to that found in the previous mid-latitude INP measurements in autumn using the same instrument; surprisingly high INP abundance ($\ge 1 \text{ L}^{-1}$ at –25 °C) for the examined temperatures throughout the year that PINE-03 did not measure at other sites; and high INP concentration in spring, possibly related to arctic haze episodes.

58 GEOSCIENCES↗
NASA NTRS2002

Characterization of Polar Mesospheric Clouds Using Infrared Measurements From HALOE

Measurements from the Halogen Occultation Experiment (HALOE) revealed the infrared signature of polar mesospheric clouds (PMCs), for the first time, HALOE PMC observations at eight wavelengths (2.45 - 10 microns) show remarkable agreement with model PMC spectra based on ice particle extinction, and thus provide the first confirmation that water ice is the primary component of PMCs. Because PMCs respond to changes in temperature and water vapor, they are considered an indicator of global climate change. We propose to further the understanding of PMCs using a decade of infrared measurements form HALOE. This effort will characterize PMC spectral properties, extinction profiles, and size distributions. Using this information, HALOE measurements will be used to make simultaneous retrievals of H2O, O3, and temperature, in the presence of PMCs. The simultaneous retrievals of particle properties, H2O, O3, and temperature will be used with HALOE NO data to provide a significant step forward in the knowledge of PMC characteristics and formation conditions. We will challenge fundamental theories of PMC formation, and investigate changes in PMC properties and related conditions over the length of the HALOE measurement record. HALOE has been operating without flaw since it was launched on October 11, 1991. Consequently, ten southern and ten northern PMC seasons have been observed thus far, providing a wealth of data for the study of PMCs and related parameters.

Hervig, Mark E.↗
DOE OSTI2021

The Shortwave Spectral Radiometer for Atmospheric Science: Capabilities and Applications from the ARM User Facility

Industry advances have greatly reduced the cost and size of ground-based shortwave (SW) sensors for the ultraviolet, visible, and near-infrared spectral ranges that make up the solar spectrum, while simultaneously increasing their ruggedness, reliability, and calibration accuracy needed for outdoor operation. These sensors and collocated meteorological equipment are an important part of the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) User Facility, which has supported parallel integrated measurements of atmospheric and surface properties for more than two decades at fixed and mobile sites around the world. The versatile capability of these ground-based measurements includes 1) rich spectral information required for retrieving cloud and aerosol microphysical properties, such as cloud phase, cloud particle size, and aerosol size distributions, and 2) high temporal resolution needed for capturing fast evolution of cloud microphysical properties in response to rapid changes in meteorological conditions. Here we describe examples of how ARM's spectral radiation measurements are being used to improve understanding of the complex processes governing microphysical, optical, and radiative properties of clouds and aerosol.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

Stability of metal particle and metal particulate media

Metal particulate (MP) video tape was launched for 8 mm video tape in 1985. Since then MP tapes have been applied to several consumer formats and instrumental formats because of its superior electrical performance. Recently data storage media, such as DDS and D-8, have started employing MP tape. However, there are serious concerns with archival stability of MP tape particularly in the case of data storage use, as metal particles essentially have problems with chemical instability and are susceptible to oxidation and corrosion. Although there were some studies about the archival stability of metal particles or MP tapes, a clear understanding has yet to be reached. In this paper, we report the stability of magnetic properties of current metal particles, and then discuss the new technologies to improve the stability further.

Okamoto, Kazuhiro↗
NASA NTRS2021

The First Widespread Solar Energetic Particle Event Observed By Solar Orbiter on 2020 November 29

Context. On 2020 November 29, the first widespread solar energetic particle (SEP) event of solar cycle 25 was observed at four widely separated locations in the inner (. 1AU) heliosphere. Relativistic electrons as well as protons with energies > 50MeV were observed by Solar Orbiter (SolO), Parker Solar Probe (PSP), the Solar Terrestrial Relations Observatory (STEREO)-A and multiple near-Earth spacecraft. The SEP event was associated with an M4.4 class X-ray flare and accompanied by a coronal mass ejection (CME) and an extreme ultraviolet (EUV) wave as well as a type II radio burst and multiple type III radio bursts. Aims. We present multi-spacecraft particle observations and place them in context with source observations from remote sensing instruments and discuss how such observations may further our understanding of particle acceleration and transport in this widespread event. Methods. Velocity dispersion analysis (VDA) and time shift analysis (TSA) were used to infer the particle release times at the Sun. Solar wind plasma and magnetic field measurements were examined to identify structures that influence the properties of the energetic particles such as their intensity. Pitch angle distributions and first-order anisotropies were analyzed in order to characterize the particle propagation in the interplanetary medium. Results. We find that during the 2020 November 29 SEP event, particles spread over more than 230° in longitude close to 1AU. The particle onset delays observed at the different spacecraft are larger as the flare–footpoint angle increases and are consistent with those from previous STEREO observations. Comparing the timing when the EUV wave intersects the estimated magnetic footpoints of each spacecraft with particle release times from TSA and VDA, we conclude that a simple scenario where the particle release is only determined by the EUV wave propagation is unlikely for this event. Observations of anisotropic particle distributions at SolO, Wind, and STEREO-A do not rule out that particles are injected over a wide longitudinal range close to the Sun. However, the low values of the first-order anisotropy observed by near-Earth spacecraft suggest that diffusive propagation processes are likely involved.

A Kollhoff↗
DOE OSTI2023

Effects of magnetic field annealing on the hard magnetic properties of milled Nd-Fe-B powders

In this study, we report the effect of magnetic field annealing (MA) in relieving the stress induced during the milling of Nd-Fe-B sintered magnets. The effect of MA processing parameters and particle size on the magnetic properties were investigated. Based on the results, magnetic field annealing is more effective in improving the magnetic properties of larger size particles, compared to finer particles. Our computational study on the role of particle surface defects in bi-modal particle distribution agrees with results obtained experimentally. In conclusion, magnetic field annealed powder has been successfully used to develop 4.6 g.cm -3 density bonded magnets with 75 vol% of magnetic powder and polyamide 12 (nylon 12) polymer binder resulting in 11.3 MGOe energy product.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Engineering correlations of variable-property effects on laminar forced convection mass transfer for dilute vapor species and small particles in air

A simple engineering correlation scheme is developed to predict the variable property effects on dilute species laminar forced convection mass transfer applicable to all vapor molecules or Brownian diffusing small particle, covering the surface to mainstream temperature ratio of 0.25 T sub W/T sub e 4. The accuracy of the correlation is checked against rigorous numerical forced convection laminar boundary layer calculations of flat plate and stagnation point flows of air containing trace species of Na, NaCl, NaOH, Na2SO4, K, KCl, KOH, or K2SO4 vapor species or their clusters. For the cases reported here the correlation had an average absolute error of only 1 percent (maximum 13 percent) as compared to an average absolute error of 18 percent (maximum 54 percent) one would have made by using the constant-property results.

Gokoglu, S. A.↗
NASA NTRS1983

Evaluation of a stochastic model of particle dispersion in a turbulent round jet

A stochastic model of particle dispersion by turbulence, proposed by Gosman and Ioannides (1981), is evaluated. The method employs a k-epsilon model to estimate turbulence properties. Dispersion is determined by computing particle motion, with random sampling to obtain instantaneous flow properties for a statistically significant number of particle trajectories. The stochastic model yields good results particularly when eddy lifetimes are evaluated. The method allows the effects of large relative velocities between the particles and the flow, drag properties at Reynolds numbers greater than the Stokes flow regime, and the variations of local turbulence properties to be readily handled, at least for boundary layer flows.

Shuen, J.-S.↗
DOE OSTI2022

Quasilinear theory of general electromagnetic fluctuations including discrete particle effects for magnetized plasmas: General analysis

The general quasilinear Fokker–Planck kinetic equation for the gyrophase-averaged plasma particle distribution functions in magnetized plasmas is derived, making no restrictions on the energy of the particles and on the frequency of the electromagnetic fluctuations and avoiding the often made Coulomb approximation of the electromagnetic interactions. Here, the inclusion of discrete particle effects breaks the dichotomy of nonlinear kinetic plasma theory divided into the test particle and the test fluctuation approximation because it provides expression of both the non-collective and collective electromagnetic fluctuation spectra in terms of the plasma particle distribution functions. Within the validity of the quasilinear approach, the resulting full quasilinear transport equation can be regarded as a determining nonlinear equation for the time evolution of the plasma particle distribution functions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗