Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PUSH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

A review on snake robot testbeds in granular and restricted maneuverability spaces

Here this article reviews the state of the art in evaluating snake robots for small spaces such as a collapsed building where the snake is either locomoting in restricted maneuverability spaces, such as narrow pipes or tunnels, or pushing through granular regions, such as dirt and rubble. It makes recommendations on designing a testbed that can enable a comprehensive evaluation of a snake robot’s overall capability and an objective comparison of different snakes. A survey of 31 papers reveals that 20 testbeds were used to test snake robots in restricted maneuverability environments. All of those were built specifically to test a particular snake robot rather than for comparison with other snake robots, but each offers insights into designing comprehensive, comparative testbeds. The article analyzed these 20 testbeds in terms of how well they addressed the previously established disaster robotics metrics of scale (a dimensionless number) and four traversability elements, i.e. verticality, tortuosity, accessibility elements, and surface properties. This review suggests that two kinds of general testbeds are in need for the snake robot community: (1) a testbed with high physical fidelity for measuring suitability for a target application, and (2) a testbed which provides a dimensionless comparison of different snake robots. The review is expected to benefit the community in several ways. It can help form a consensus on a suite of metrics and test methods to incorporate into a testbed for evaluating and comparing different types of snake robots and capturing the performance of snake robots in more realistic work envelopes. The metrics and test methods can also pro-actively inform snake robot design as they offer more formally quantified work envelopes, thus accelerating technology transfer. The use of scale and traversability is expected to be applicable to robots in general.

42 ENGINEERING↗

Review of heat transfer enhancement techniques in two-phase flows for highly efficient and sustainable cooling

We show that two-phase internal flow is ubiquitous to many systems due to its ability to transfer large amounts of heat effectively. Recent advances motivated by sustainability have pushed towards augmenting the heat transfer between the tube and the two-phase working fluid. Augmenting heat transfer in two-phase flows enables process intensification, and compactness leading to reduced cost and material consumption. This review investigates the effect of heat transfer enhancement techniques on different fluids including R134a, R407C, R22, etc … The techniques are categorized into passive and active and focus on durable enhancement methods which do not include surface structuring or coating. Passive techniques utilize geometrical and surface modifications to induce better mixing. Several passive techniques are analyzed including fins, inserts, and more. In analyzing these techniques, the effect of changing geometric parameters is studied, and the limitations are highlighted. Further, active techniques that enable heat transfer enhancement through applying power are also investigated. Electrohydrodynamic approaches are analyzed and compared to passive techniques. Additionally, the implications of heat exchange enhancement in the context of global energy are discussed. An energy analysis discretized by the use sector is conducted, with an emphasis on predicting the future potential for renewable and sustainable development. Moreover, although active approaches provide the highest heat transfer enhancement, due to implementation difficulties, passive techniques are more frequently adopted. The review ends with discussion of next-generation heat exchangers which will rely more on additive manufacturing due to its flexibility and reduced cost per part as the technology matures.

Nusselt number↗

A review of computing-based automated fault detection and diagnosis of heating, ventilation and air conditioning systems

We report faults in Heating, Ventilation, and Air Conditioning (HVAC) systems of buildings result in significant energy waste in building operation. With fast-growing sensing data availability and advancement in computing, computational modeling has demonstrated strong capability to detect and diagnose HVAC system faults, hence, ensuring efficient building operation. This paper comprehensively reviews the state-of-the-art computing-based fault detection and diagnosis (FDD) for HVAC systems. Overall, the reviewed computing-based FDD methods are classified as two major approaches: knowledge-based and data-driven approaches. We then identify multiple important topics, including data availability, training data size, data quality, approach generality, capability, interpretability, and required modeling efforts, along with corresponding metrics to summarize the most updated FDD development. Generally, the knowledge-based approaches are further divided as physics-based modeling, Diagnostic Bayesian Network, and performance indicator-based methods while data-driven approaches include supervised learning, unsupervised learning, and regression and statistics-based methods. State-of-the-art FDD development, remaining challenges, and future research directions are further discussed to push forward FDD in practice. Availability of fault data, capability of existing methods to deal with complex fault situations (such as simultaneous faults), modeling interpretability for data-driven methods, and required engineering efforts for physics-based methods are identified as remaining challenges in FDD development. Improving modeling fidelity and reducing modeling efforts are essential for applying physics-based methods in real buildings. Meanwhile, addressing fault data availability, increasing algorithm adaptability, and handling multiple faults are essential to further enhance the applicability of data-driven FDD approaches.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The significance of biomass densification in biological-based biorefineries: A critical review

Replacing fossil fuels with renewable biofuels derived from lignocellulosic biomass is an important aspect of addressing environmental challenges and developing a sustainable industrial society. Densification overcomes the problems of low bulk density and poor flowability of biomass and has been commercialized for producing solid biofuels, but the overall impact of densification on biological-based biorefineries that primarily target liquid fuels (e.g., ethanol) is still under investigation. Herein, this review provides a thorough summary of the application of densified biomass in biological-based biorefineries. First, the effects of densification parameters as well as variables of biomass materials on the densified products’ quality are reviewed, and different commonly used densification technologies are also discussed and compared. Then, the discussion focuses on the physiochemical modifications of biomass caused by densification that may influence further pretreatment and/or enzymatic hydrolysis in biorefineries. Industrial pelleting has been generally shown to exhibit positive/neutral effects on the enzymatic hydrolysis of multiple biomass feedstocks after pretreatments, indicating the viability of using pellets as starting feedstocks in biorefineries. Densification causes structural disruption of biomass, which may facilitate further biochemical conversions. Integrating biomass densification in the feedstock supply chain is feasible for large-scale biorefineries to overcome the techno-economic barriers and become profitable. Suggestions are presented for the efficiency enhancement and cost reduction in densification-based biorefineries. To enable wider applications, it is now the time to employ more demo and full-scale activities in different regions of the world pushing the research and innovation of densification integrated within biorefining.

09 BIOMASS FUELS↗

In-situ TEM observation of shear induced microstructure evolution in Cu-Nb alloy

Phase boundaries in multiphase alloys govern defect interaction and chemical intermixing across different phases during plastic deformation. Dynamic interaction of defects with phase boundaries in multiphase alloys, especially for immiscible alloys, has been topic of significant research interest in recent years. In this work, we describe a novel approach for carrying out in-situ TEM shear deformation to directly observe interfacial microstructural evolution of a Cu-Nb alloy. A unique double shear specimen geometry is microfabricated by a focused ion beam technique to apply shear deformation upon push loading inside the TEM. From the real-time observation, we discover that the phase boundary with a zigzag morphology effectively blocks stacking faults nucleated in a Cu grain from slipping into a Nb grain. Meanwhile, the Cu phase bears the most plastic deformation through slip or twinning mechanisms. This work sheds light on understanding the shear deformation and the behavior of phase boundaries in multiphase alloys during shear deformation.

36 MATERIALS SCIENCE↗

Peatland microbial community response to altered climate tempered by nutrient availability

Northern latitude peatlands contain large reserves of soil carbon (C) due in part to climatic constraints on decomposition, including low temperatures and water inundated soils. Under future climate change scenarios these peatlands will experience warmer temperatures, extended growing seasons, and a potential draw down of the water table, all of which improve conditions for decomposition, as well as photosynthesis. Increased photosynthesis may feedback to increase decomposition of soil C through increased root exudates to belowground decomposer communities, primarily as low molecular weight carbon compounds (LMWCC). In this study, we examine the interactive effects of climate, a combination of three temperatures and two moisture regimes, and root exudates on microbial decomposer function, measured as CO2 respiration, biomass, and potential enzyme activity. We had four substrate treatments: two common LMWCC (glycine or glucose + citric acid), chitin to simulate fungal necromass, and DI as the control. Our results support our first hypothesis that increasing temperature will increase C respiration across substrate and moisture treatments. Our second hypothesis was that compared to control and chitin, soluble substrates (i.e., LMWCC) will enhance respiration across all climate treatments. This was only partially supported. As expected, the two LMWCC substrate additions increased C respiration above the two other substrate additions at current recorded growing season average (12 °C, low treatment) and high (20 °C, med treatment) temperature treatments. Surprisingly, when the system was pushed to a higher temperature extreme (28 °C, high treatment), the low moisture controls respired more C than the other substrate × climate treatments. Potential enzyme activity and demand for phosphorus appear to explain these trends as opposed to changes to microbial biomass. Our results indicate that under projected future high temperatures, the peatland microbial community allocates additional labile C resources to enzyme production to meet nutrient demands, and as such, dampens C lost through respiration.

Keiser, Ashley D.↗

High Resolution Dopant Profiles Revealed by Atom Probe Tomography and STEM-EBIC for CdTe Based Solar Cells

Segregated elements and their diffusion profiles within grain boundaries and interfaces resulting from post deposition heat treatments are revealed using atom probe tomography (APT), scanning transmission electron microscopy (STEM), and electron beam induced current (EBIC) techniques. The results demonstrate how these techniques complement each other to provide conclusive evidence for locations of space charge regions and mechanisms that create them at the nanoscale. Most importantly, a Cl dopant profile that extends ~5 nm into CdTe grains interfacing the CdS is shown using APT and STEM synergy, which has been shown to push the pn-junction into the CdTe layer indicative of a homojunction (revealed by STEM EBIC). In addition, Cu and Cl concentrations within grain boundaries within several nms and µms from the CdS/CdTe interface are compared, Na segregation of <0.1% is detected, and S variations of ~1–3% are witnessed between CdTe grains close to the CdS/CdTe interface. The segregation and diffusion of these elements directly impacts on the material properties, such as band gap energy and n/p type properties. Optimization of the interfacial and grain boundary doping will lead to higher efficiency solar cells.

36 MATERIALS SCIENCE↗

Investigating the Role of Copper in Arsenic Doped Cd(Se,Te) Photovoltaics

The open circuit voltage (VOC) deficit in Cd(Se,Te)-based photovoltaics remains a critical obstacle for pushing the technology closer to theoretical performance limits. Arsenic doping has become a dominant and promising route to achieve the higher p-type carrier concentrations necessary for higher VOC, but challenges associated with this alternate defect chemistry and higher doping density have hindered progress. Here we show that while arsenic doping enables high carrier concentrations (>1016 cm-3), co-doping with copper can provide a boost to VOC without a significant change to carrier concentration. A large data set is initially used to explore current-voltage and capacitance-voltage trends associated with arsenic doped devices with and without copper. A smaller subset is then used to probe these trends using a wide variety of characterization techniques. Copper is found to facilitate reduced interface recombination and potentially improved bulk absorber characteristics, though the mechanisms for these improvements are not yet clear. Despite the improved performance of co-doped devices, VOC is still far below its potential especially for highly doped devices. Low emitter doping in conjunction with high absorber doping seems to be a plausible cause for this significant deficit, though other device properties may exacerbate this problem.

CdSeTe↗

Photon management in silicon photovoltaic cells: A critical review

With the practical efficiency of the silicon photovoltaic (PV) cell approaching its theoretical limit, pushing conversion efficiencies even higher now relies on reducing every type of power loss that can occur within the device. Limiting optical losses is therefore critical and requires effective management of incident photons in terms of how they interact with the device. Ultimately, photon management within a PV cell means engineering the device and constituent materials to maximize photon absorption within the active semiconductor and therefore reduce the number of photons lost through other means, most notably reflection and parasitic absorption. There have been great advancements in the front and the rear side photon management techniques in recent years. This review aims to discuss these advancements and compare the various approaches, not only in terms of increases in photogenerated current, but also their compatibility with different PV cell architectures and potential trade-offs, like increased surface recombination or scalability for high-volume manufacturing. In this review, a comprehensive discussion of a wide variety of the front and the rear side photon management structures are presented with suggestions to improve the already achieved performance further. Here, this review is unique because it not only presents the recent development in photon management techniques, but also offers through analysis of these techniques and pathways to improve further.

14 SOLAR ENERGY↗

Eigenstate Localization in an Asymmetric Coupled Quantum Well Pair

Optical pumping of a type-I/type-II coupled asymmetric quantum well pair induces a spatially separated two dimensional charge carriers plasma in the well's wide and narrow parts. Treating the two coupled wells as a single system we find that the eigenstate probability distribution localizes exclusively either in the wide or the narrow parts of the well pair. The energy of the narrow-well localized state determines the minimal excitation energy for optically pumped charge carriers separation. In a previously used design [Guliamov et al., PRB 64 035314 (2001)] this narrow well transition energy was measured to correspond to a wavelength of 646 nm. We propose modifications to the design suggested earlier with the purpose of pushing up the energy required for the optical pumping of the two-dimensional plasma into the green and blue regions of the visible spectrum.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Unconventional gas: truly a game changer?

If prices of natural gas justify and/or if concerns about climate change push conventional coal off the table, vast quantities of unconventional gas can be brought to market at reasonable prices. According to a report issued by PFC Energy, global unconventional natural gas resources that may be ultimately exploited with new technologies could be as much as 3,250,000 billion cubic feet. Current conventional natural gas resources are estimated around 620,000 billion cubic feet.

03 NATURAL GAS↗

California schemin': how about direct rebates?

California is pushing ahead with its own climate bill to reduce statewide emissions to 1990 levels by 2020. Some 75--80 percent of the measures required to meet the 2020 reductions in greenhouse gas (GHG) emissions will be met through the 33 percent renewable portfolio standard (RPS), stringent energy efficiency initiatives, and a long list of other mandatory requirements affecting the transport sector. The balance will be met through market- and pricing-oriented mechanisms, including auctioning of GHG emission permits. In early January, an advisory committee proposed that roughly 75 percent of the collected proceeds should be distributed directly to households with the balance used to assist badly affected industries, especially those with few options to transition to a lower carbon regime.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Ariz. Utilities ordered to slash sales 22% in coming decade

Traditional utility rate setting mechanisms no longer make sense at a time when regulators are aggressively pushing energy conservation and demand management. The new plan is predicted to lower customer utility bills in Arizona by $9 billion and create an estimated 12,000 new jobs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

An iterative finite difference method for solving the quantum hydrodynamic equations of motion

The quantum hydrodynamic equations of motion associated with the de Broglie-Bohm description of quantum mechanics describe a time evolving probability density whose 'fluid' elements evolve as a correlated ensemble of particle trajectories. These equations are intuitively appealing due to their similarities with classical fluid dynamics and the appearance of a generalized Newton's equation of motion in which the total force contains both a classical and quantum contribution. However, the direct numerical solution of the quantum hydrodynamic equations (QHE) is fraught with challenges: the probability 'fluid' is highly-compressible, it has zero viscosity, the quantum potential ('pressure') is non-linear, and if that weren't enough the quantum potential can also become singular during the course of the calculations. Collectively these properties are responsible for the notorious numerical instabilities associated with a direct numerical solution of the QHE. The most successful and stable numerical approach that has been used to date is based on the Moving Least Squares (MLS) algorithm. The improved stability of this approach is due to the repeated local least squares fitting which effectively filters or reduces the numerical noise which tends to accumulate with time. However, this method is also subject to instabilities if it is pushed too hard. In addition, the stability of the MLS approach often comes at the expense of reduced resolution or fidelity of the calculation (i.e., the MLS filtering eliminates the higher-frequency components of the solution which may be of interest). Recently, a promising new solution method has been developed which is based on an iterative solution of the QHE using finite differences. This method (referred to as the Iterative Finite Difference Method or IFDM) is straightforward to implement, computationally efficient, stable, and its accuracy and convergence properties are well understood. A brief overview of the IFDM will be presented followed by a couple of benchmark applications on one- and two-dimensional Eckart barrier scattering problems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regulating TNCs: Should Uber and Lyft set their own rules?

We evaluate the impact of three proposed regulations of transportation network companies (TNCs) like Uber, Lyft and Didi: (1) A minimum wage for drivers, (2) a cap on the number of drivers or vehicles, and (3) a per-trip congestion tax. The impact is assessed using a queuing theoretic equilibrium model which incorporates the stochastic dynamics of the app-based ride-hailing matching platform, the ride prices and driver wages established by the platform, and the incentives of passengers and drivers. We show that a floor placed under driver earnings can push the ride-hailing platform to hire more drivers and offer more rides, at the same time that passengers enjoy faster rides and lower total cost, while platform rents are reduced. Contrary to standard competitive labor market theory, enforcing a minimum wage for drivers benefits both drivers and passengers, and promotes the efficiency of the entire system. This surprising outcome holds for almost all model parameters, and it occurs because the wage floor curbs TNC labor market power. In contrast to a wage floor, imposing a cap on the number of vehicles hurts drivers, because the platform reaps all the benefits of limiting supply. The congestion tax has the expected impact: fares increase, wages and platform revenue decrease. Here, we also construct variants of the model to briefly discuss platform subsidy, platform competition, and autonomous vehicles.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Stabilizing effects of oxidation on propagating formation reactions occurring in nanometer-scale metal multilayers

Reactive rare-earth / transition metal multilayers exhibit a variety of complex reaction behaviors depending on surrounding gaseous environment and material design. Small period (< 100 nm bilayer), 5 gm-thick Sc/Ag multilayers undergo self-sustained formation reactions when ignited in air or in vacuum. High-speed videography reveals unstable reaction waves in these samples, characterized by the repeated, transverse passage of narrow, spin bands. Intermediate Sc/Ag designs — with multilayer period between 100 and 200 nm — only react in air. These multilayers exhibit propagating reactions with alternating unstable and stable characteristics. Narrow, spin bands advance the reaction front stepwise. Soon after the passage of a transverse band, a trailing oxidation wave encroaches on the intermetallic reaction front temporarily pushing the stalled wave forward in a uniform manner. Viewed in full, these events repeat giving rise to a new oscillatory behavior. Sc/Ag multilayers having a large period (> 200 nm bilayer) also react exclusively in air but exhibit a different propagating mode. The oxidation of Sc combined with the exothermic reaction of metal species results in continually-stable waves characterized by a smooth wavefront morphology and uniform velocity. The flame temperatures associated with propagating waves are estimated using measured heats of reaction and enthalpy-temperature relationships in order to provide insight into the possible phase transformations that occur during these different exothermic reactions.

36 MATERIALS SCIENCE↗

The performance evaluation of direct detection electron energy-loss spectroscopy at 200 kV and 80 kV accelerating voltages

Direct electron detectors (DeDs) have been widely used for imaging studies because of their higher beam sensitivity, lower noise, improved pixel resolution, etc. However, there have been limited studies related to the performance in spectroscopic applications for the direct electron detection. Hereby, taking the advantage of the DeD installed on a high-performance electron energy-loss spectrometer, we systematically studied the performance of a DeD (Gatan's K2 IS) fitted on an aberration-corrected transmission electron microscope (TEM) equipped with an electron monochromator. Using SrTiO3 as the model system, the point spread function in the zero-loss region of the spectrum and the performance for core loss spectroscopy have been investigated under both 200 kV and 80 kV operating conditions. We demonstrate that the K2 detector can achieve an overall better performance at 200 kV than a charge coupled device (CCD) detector. At 80 kV, the K2 DeD is still better than a CCD, except for the relative broad tails of the zero-loss peak. The signal-to-noise ratio is very close for DeD and CCD under 80 kV. Based on our data obtained at different operating voltages, it is clear that DeD will benefit the microscopy community and boost the development of cutting-edge materials science studies by pushing the frontiers in electron energy-loss spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stroboscopic ultrafast imaging using RF strip-lines in a commercial transmission electron microscope

The development of ultrafast electron microscopy (UEM), specifically stroboscopic imaging, has brought the study of structural dynamics to a new level by overcoming the spatial limitations of ultrafast spectroscopy and the temporal restrictions of traditional TEM simultaneously. Combining the concepts governing both techniques has enabled direct visualization of dynamics with spatiotemporal resolutions in the picosecond-nanometer regime. Here, in this study, we push the limits of imaging using a pulsed electron beam via RF induced transverse deflection based on the newly developed 200 keV frequency-tunable strip-line pulser. We demonstrate 0.2 nm spatial resolution at high magnifications and elucidation of Lorentz imaging using the phase-microscopy method. We also present beam coherence measurements and expand our study using the breathing modes of a silicon interdigitated comb under RF excitation which achieves improved temporal synchronization between the electron pulse-train and electric field. A new RF holder has also been developed with impedance matching to the RF signal to minimize transmission power loss to samples and its performance is compared with a conventional sample holder.

47 OTHER INSTRUMENTATION↗