Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Comparison of improved Aura Tropospheric Emission Spectrometer (TES) CO 2 with HIPPO and SGP aircraft profile measurements

Comparisons are made between mid-tropospheric Tropospheric Emission Spectrometer (TES) carbon dioxide (CO{sub 2}) satellite measurements and ocean profiles from three Hiaper Pole-to-Pole Observations (HIPPO) campaigns and land aircraft profiles from the United States Southern Great Plains (SGP) Atmospheric Radiation Measurement (ARM) site over a 4-yr period. These comparisons are used to characterize the bias in the TES CO{sub 2} estimates and to assess whether calculated and actual uncertainties and sensitivities are consistent. The HIPPO dataset is one of the few datasets spanning the altitude range where TES CO{sub 2} estimates are sensitive, which is especially important for characterization of biases. We find that TES CO{sub 2} estimates capture the seasonal and latitudinal gradients observed by HIPPO CO{sub 2} measurements; actual errors range from 0.8–1.2 ppm, depending on the campaign, and are approximately 1.4 times larger than the predicted errors. The bias of TES versus HIPPO is within 0.85 ppm for each of the 3 campaigns; however several of the sub-tropical TES CO{sub 2} estimates are lower than expected based on the calculated errors. Comparisons of aircraft flask profiles, which are measured from the surface to 5 km, to TES CO{sub 2} at the SGP ARM site show good agreement with an overall bias of 0.1 ppm and rms of 1.0 ppm. We also find that the predicted sensitivity of the TES CO{sub 2} estimates is too high, which results from using a multi-step retrieval for CO{sub 2} and temperature. We find that the averaging kernel in the TES product corrected by a pressure-dependent factor accurately reflects the sensitivity of the TES CO{sub 2} product.

54 ENVIRONMENTAL SCIENCES↗

Magnetic compressibility of layered ferromagnet under pressure

This study systematically investigates the magnetic properties of the layered ferromagnet MnPt 5 As under pressure through a combination of experimental measurements and theoretical simulations. MnPt 5 As exhibits a ferromagnetic transition at approximately 301 K. Neutron diffraction measurements under applied pressures up to ∼4.9 GPa were performed over a temperature range from 320 to 100 K to probe its magnetic behavior. The results confirm that the Mn atoms maintain a ferromagnetic order under applied pressures, consistent with the ambient-pressure findings. However, magnetic anisotropy is notably suppressed. To further elucidate the compressibility of magnetic anisotropy in MnPt 5 As, x-ray diffraction under pressure was conducted. The results reveal that the c-axis undergoes a greater and more rapid compression compared to the ab -plane, which may contribute to the observed suppression of Mn ferromagnetic ordering along the c -axis. Additionally, theoretical calculations indicate that magnetic ordering exhibits a similar pressure-induced trend under applied pressure, supporting the experimental observations. These findings offer insights into the pressure-dependent magnetic properties and anisotropy of MnPt 5 As, with potential implications for strain engineering in Mn-based magnetic devices.

Electronic band structure↗

Simulations of SITI Cookoff Experiments Carried Out with Different Lots of PBX 9502

A pressure dependent cookoff model for PBX 9502 was developed by Hobbs’ et. al. PBX 9502 is composed of 95% by mass triaminotrinitrobenzene (TATB) and a 5% by mass chlorotrifluoroethylene/vinylidine fluoride binder. The objective in this study is to implement this cookoff model in Aria to simulate Sandia Instrumented Thermal Ignition (SITI) experiments that were carried out with different manufacturing lots of PBX 9502. The SITI design consists of solid cylinders (1" diameter × 1" height) of insensitive high explosive (IHE) confined by a cylindrical aluminum case. An electric heater is wrapped around the lateral surface of the case. This heater produces a temperature heating ramp on the outer surface of the case. Internal thermocouples measure the IHE temperature rise from the center to locations close to the IHE-aluminum interface. The energetic material is heated until thermal ignition occurs. Pressure is measured with a static pressure transducer installed on top of the confinement case. Two–dimensional axisymmetric heat conduction finite element models were implemented to simulate these experiments using four options of the PBX 9502 cookoff model. In addition, the predictive ability of this thermal decomposition model is evaluated using Latin Hypercube Sampling (LHS) techniques.

42 ENGINEERING↗

Interferometric measurements of refractive index and dispersion at high pressure

Abstract We describe a high precision interferometer system to measure the pressure dependence of the refractive index and its dispersion in the diamond anvil cell (DAC). The reflective Fabry–Perot fringe patterns created by both a white light and a monochromatic beam are recorded to determine both the sample thickness and its index at the laser wavelength and to characterize the dispersion in the visible range. Advances in sample preparation, optical setup, and data analysis enable us to achieve $$10^{-4}$$ 10 - 4 random uncertainty, demonstrated with an air sample, a factor of five improvement over the best previous DAC measurement. New data on $${\text{H}}_{2}\text{O}$$ H 2 O liquid water and ice VI up to 2.21 GPa at room temperature illustrate how higher precision measurements of the index and its optical dispersion open up new opportunities to reveal subtle changes in the electronic structure of water at high pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic piston model for higher ion charge and different electron and ion plasma temperatures

A new formula for the magnetic piston model, which explicitly describes how the momentum imparted to the ions by the magnetic pressure depends not only on the ion mass but also on the ion charge, as well as, on the plasma electron and ion temperatures, is derived following Rosenbluth's classical particle-field self-consistent plane approximation analytic calculation. The formula presented in this paper has implications in explaining the experimentally observed separation of the ions of different species and charges by the magnetic field penetrating the plasma and specularly reflecting them.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Products of the Benzene + O(3P) Reaction

The gas-phase reaction of benzene with O(3P) is of considerable interest for modeling of aromatic oxidation, and also because there exist fundamental questions concerning the prominence of intersystem crossing in the reaction. While its overall rate constant has been studied extensively, there are still significant uncertainties in the product distribution. The reaction proceeds mainly through the addition of the O atom to benzene, forming an initial triplet diradical adduct, which can either dissociate to form the phenoxy radical and H atom, or undergo intersystem crossing onto a singlet surface, followed by a multiplicity of internal isomerizations, leading to several possible reaction products. In this work, we examined the product branching ratios of the reaction between benzene and O(3P) over the temperature range of 300 to 1000 K and pressure range of 1 to 10 Torr. The reactions were initiated by pulsed-laser photolysis of NO2 in the presence of benzene and helium buffer in a slow-flow reactor, and reaction products were identified by using the multiplexed chemical kinetics photoionization mass spectrometer operating at the Advanced Light Source (ALS) of Lawrence Berkeley National Laboratory. Phenol and phenoxy radical were detected and quantified. Cyclopentadiene and cyclopentadienyl radical were directly identified for the first time. Finally, ab initio calculations and master equation/RRKM modeling were used to reproduce the experimental branching ratios, yielding pressure-dependent rate expressions for the reaction channels, including phenoxy + H, phenol, cyclopentadiene + CO, which are proposed for kinetic modeling of benzene oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acoustic velocities, elasticity, and pressure-induced elastic softening in compressed neodymium

For the first time, the acoustic velocities and elasticity of double hexagonal close-packed neodymium (Nd) were measured at high pressure using ultrasonic interferometry in conjunction with synchrotron X-ray techniques. Here, both the compressional and shear wave velocities increased with an increase in pressure of up to ~5.4 GPa before they exhibited almost constant values upon further compression. This pressure-induced elastic wave velocity softening can be attributed to the structural instability in dhcp-Nd. From the current sound velocities and density data, we obtained new bulk and shear moduli as well as their pressure dependence for polycrystalline dhcp-Nd, yielding $B_0$=33.2(9) GPa, $G_0$=14.1(5) GPa, $\partial$$B/$$\partial$$P$ = 3.6 (4) and $\partial$$=G/$$\partial$$P$ = 1.3 (2) while other elasticity-related/mechanical properties, including Young's modulus, Debye temperature, Poisson's ratio, and Grüneisen parameter, which are important parameters for the application of Nd in extreme environments, were also derived.

36 MATERIALS SCIENCE↗

Theoretical Calculation and Validation of the Water Vapor Continuum Absorption

The primary objective of this investigation is the development of an improved parameterization of the water vapor continuum absorption through the refinement and validation of our existing theoretical formalism. The chief advantage of our approach is the self-consistent, first principles, basis of the formalism which allows us to predict the frequency, temperature and pressure dependence of the continuum absorption as well as provide insights into the physical mechanisms responsible for the continuum absorption. Moreover, our approach is such that the calculated continuum absorption can be easily incorporated into satellite retrieval algorithms and climate models. Accurate determination of the water vapor continuum is essential for the next generation of retrieval algorithms which propose to use the combined constraints of multi-spectral measurements such as those under development for EOS data analysis (e.g., retrieval algorithms based on MODIS and AIRS measurements); current Pathfinder activities which seek to use the combined constraints of infrared and microwave (e.g., HIRS and MSU) measurements to improve temperature and water profile retrievals, and field campaigns which seek to reconcile spectrally-resolved and broad-band measurements such as those obtained as part of FIRE. Current widely used continuum treatments have been shown to produce spectrally dependent errors, with the magnitude of the error dependent on temperature and abundance which produces errors with a seasonal and latitude dependence. Translated into flux, current water vapor continuum parameterizations produce flux errors of order 10 W/ml, which compared to the 4 W/m' magnitude of the greenhouse gas forcing and the 1-2 W/m' estimated aerosol forcing is certainly climatologically significant and unacceptably large. While it is possible to tune the empirical formalisms, the paucity of laboratory measurements, especially at temperatures of interest for atmospheric applications, preclude tuning the empirical continuum models over the full spectral range of interest for remote sensing and climate applications. Thus, we propose to further develop and refine our existing far-wing formalism to provide an improved treatment applicable from the near-infrared through the microwave. Based on the results of this investigation, we will provide to the remote sensing/climate modeling community a practical and accurate tabulation of the continuum absorption covering the near-infrared through the microwave region of the spectrum for the range of temperatures and pressures of interest for atmospheric applications.

Ma, Qiancheng↗

Theoretical Calculation and Validation of the Water Vapor Continuum Absorption

The primary objective of this investigation is the development of an improved parameterization of the water vapor continuum absorption through the refinement and validation of our existing theoretical formalism. The chief advantage of our approach is the self-consistent, first principles, basis of the formalism which allows us to predict the frequency, temperature and pressure dependence of the continuum absorption as well as provide insights into the physical mechanisms responsible for the continuum absorption. Moreover, our approach is such that the calculated continuum absorption can be easily incorporated into satellite retrieval algorithms and climate models. Accurate determination of the water vapor continuum is essential for the next generation of retrieval algorithms which propose to use the combined constraints of multispectral measurements such as those under development for EOS data analysis (e.g., retrieval algorithms based on MODIS and AIRS measurements); current Pathfinder activities which seek to use the combined constraints of infrared and microwave (e.g., HIRS and MSU) measurements to improve temperature and water profile retrievals, and field campaigns which seek to reconcile spectrally-resolved and broad-band measurements such as those obtained as part of FIRE. Current widely used continuum treatments have been shown to produce spectrally dependent errors, with the magnitude of the error dependent on temperature and abundance which produces errors with a seasonal and latitude dependence. Translated into flux, current water vapor continuum parameterizations produce flux errors of order 10 W/sq m, which compared to the 4 W/sq m magnitude of the greenhouse gas forcing and the 1-2 W/sq m estimated aerosol forcing is certainly climatologically significant and unacceptably large. While it is possible to tune the empirical formalisms, the paucity of laboratory measurements, especially at temperatures of interest for atmospheric applications, preclude tuning, the empirical continuum models over the full spectral range of interest for remote sensing and climate applications. Thus, we propose to further develop and refine our existing, far-wing formalism to provide an improved treatment applicable from the near-infrared through the microwave. Based on the results of this investigation, we will provide to the remote sensing/climate modeling community a practical and accurate tabulation of the continuum absorption covering the near-infrared through the microwave region of the spectrum for the range of temperatures and pressures of interest for atmospheric applications.

Ma, Qiancheng↗

Formation of phenanthrene via H–assisted isomerization of 2–ethynylbiphenyl produced in the reaction of phenyl with phenylacetylene

Model chemistry G3(MP2,CC)//B3LYP/6–311G(d,p) calculations of the potential energy surface for the reaction of phenyl radical (C 6 H 5 ) with phenylacetylene (C 8 H 6 ) have been carried out and combined with Rice–Ramsperger–Kassel–Marcus/Master Equation calculations of temperature– and pressure–dependent rate constants. The results showed that the reaction can serve as a viable source for the formation of phenanthrene via an indirect route involving a primary reaction of phenyl addition to the ortho carbon in the ring of phenylacetylene and H elimination producing 2–ethynylbiphenyl followed by secondary H–assisted isomerization of 2–ethynylbiphenyl to phenanthrene. In the secondary reaction, the H atom adds to the α carbon of the ethynyl side chain, then a six–member ring closure takes place followed by aromatization via an H loss. The channel of H addition to the side chain of 2–ethynylbiphenyl appears to be much faster than H addition to the ortho carbon in the ethynyl–substituted ring leading back to the initial C 6 H 5 + C 8 H 6 reactants. Rate constants for the primary C 6 H 5 + C 8 H 6 ⇌2–ethynylbiphenyl (p1) + H and secondary p1 + H⇌phenanthrene (p2) + H reactions have been computed in the temperature range of 500–2500 K at pressures of 30 Torr, 1, 10, and 100 atm and fitted to modified Arrhenius expressions. Here, the suggested kinetic scheme and rate constants are proposed as a prototype for the modeling of the growth of polycyclic aromatic hydrocarbons via the phenyl addition–dehydrocyclization (PAC) mechanism involving an addition of a PAH radical to an ethynyl–substituted PAH molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-temperature treatment of In-doped CZT crystals grown by the high-pressure Bridgman method

We evaluated the effect of high-temperature treatment of Cd0.9Zn0.1Te:In single crystals using Hall-effect measurements, medium- and high-temperature annealing under various deviations from stoichiometry, and infra-red (IR) transmission microscopy Annealing at ~730 K sharply increased the electrical conductivity (by ~1-2 orders-of-magnitude). Plots of the temperature- and cadmium-pressure dependences of the electrical conductivity, carrier concentration, and mobility were obtained. Treating previously annealed Cd-samples under a Te overpressure at 1070 K allowed us to restore their resistance to its initial high values. The main difference in comparing this material with CdTe was its lowered electron density. We explained our results within the framework of Kröger’s theory of quasi-chemical reactions between point defects in solids.

60 APPLIED LIFE SCIENCES↗

Mechanism and kinetics of the oxidation of 1,3-butadien-1-yl (n-C 4 H 5 ): a theoretical study

Here, ab initio CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311G(d,p) calculations of the C 4 H 5 O 2 potential energy surface have been combined with Rice–Ramsperger–Kassel–Marcus Master Equation (RRKM-ME) calculations of temperature- and pressure-dependent rate constants and product branching ratios to unravel the mechanism and kinetics of the n-C 4 H 5 + O 2 reaction. The results indicate that the reaction is fast, with the total rate constant being in the range of 3.4–5.6 × 10 –11 cm 3 molecule –1 s –1 . The main products include 1-oxo-n-butadienyl + O and acrolein + HCO, with their cumulative yield exceeding 90% at temperatures above 1500 K. Two conformers of 1-oxo-n-butadienyl + O are formed via a simple mechanism of O 2 addition to the radical site of n-C 4 H 5 followed by the cleavage of the O–O bond proceeding via a van der Waals C 4 H 5 O∙∙∙O complex. Alternatively, the pathways leading to acrolein + HCO involve significant reorganization of the heavy-atom skeleton either via formal migration of one O atom to the opposite end of the molecule or its insertion into the C1–C2 bond. Not counting thermal stabilization of the initial peroxy adducts, which prevails at low temperatures and high pressures, all other products share a minor yield of under 5%. Rate constants for the significant reaction channels have been fitted to modified Arrhenius expressions and are proposed for kinetic modeling of the oxidation of aromatic molecules and 1,3-butadiene. As a secondary reaction, n-C 4 H 5 + O 2 can be a source for the formation of acrolein observed experimentally in oxidation of the phenyl radical at low combustion temperatures, whereas another significant (secondary) product of the C 6 H 5 + O 2 reaction, furan, could be formed through unimolecular decomposition of 1-oxo-n-butadienyl. Both the n-C 4 H 5 + O 2 reaction and unimolecular decomposition of its 1-oxo-n-butadienyl primary product are shown not to be a substantial source of ketene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure suppresses the density wave order in kagome metal LuNb 6 ⁢Sn 6

The density waves that develop in kagome metals ScV 6 ⁢Sn 6 and LuNb 6 ⁢Sn 6 at low temperature appear to arise from underfilled atomic columns within a V-Sn or Nb-Sn scaffolding. Compressing this network with applied pressure in ScV 6 ⁢Sn 6 suppressed the structural transition temperature by constraining atomic rattling and inhibiting the shifts that define the structural modulation. We predicted that the density wave transition in LuNb 6⁢ Sn 6 at 68 K would be suppressed by pressure as well. In this Letter, we examine the pressure dependence of the density wave transition by measuring resistance vs temperature up to 2.26 GPa. We found the transition temperature is smoothly depressed and disappears around 1.9 GPa. In conclusion, this result not only addresses our prediction, but strengthens the rattling chains origin of structural instabilities in the HfFe 6⁢ Ge 6 -type kagome metals.

Charge density waves↗

Superconducting dome and structural changes in LaRu 3 ⁢Si 2 under pressure

LaRu 3 ⁢Si 2 is of current research interest as a kagome metal with a superconducting transition temperature, 𝑇 𝑐 ∼7 K, and higher-temperature charge density wave orders. Here we report on electrical transport and x-ray diffraction measurements on LaRu 3 ⁢Si 2 under pressure up to 65 GPa and 35 GPa, respectively. The superconducting transition temperature 𝑇 𝑐 first gets slightly enhanced and reaches a maximum ∼8.7 K at ∼8.5 GPa. With further applied pressure, 𝑇 𝑐 is initially gradually suppressed, then more rapidly suppressed, followed by gradual suppression, revealing a superconducting dome. Two possible pressure-induced structural phase transitions are also observed at room temperature, from the original hexagonal phase to another hexagonal structure above ∼11.5 GPa, and further to a structure with lower symmetry above ∼23.5 GPa. These transition pressures roughly correlate with features found in our pressure-dependent transport data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equation of state and thermodynamic Gruneisen parameter of monoclinic 1,1-diamino-2,2-dinitroethylene

In situ synchrotron x-ray diffraction experiments were conducted on 1,1-diamino-2,2 dinitroethylene (FOX-7) at pressures up to 6.8 GPa and temperatures up to 485 K. Within th resolution of the present diffraction data, our results do not reveal evidence for a pressureinduce structural phase transition near 2 GPa, previously observed in several vibrationa spectroscopy experiments. Based on unit-cell volume measurements, the least-squares fi using the third-order Birch–Murnaghan equation of state (EOS) yields K 0 = 12.6 ± 1.4 GP and K 0 = 11.3 ± 2.1 for the α-phase of FOX-7, which are in good agreement with recentl reported values for the deuterated sample, indicating that the effect of hydrogen–deuteriu substitution on the compressibility of FOX-7 is negligibly small. A thermal EOS is als obtained for the α-phase of FOX-7, including pressure dependence of thermal expansivity (∂α/∂P) T = -7.0 ± 2.0 × 10 -5 K -1 GPa -1 , and temperature derivative of the bulk modulus (∂K T /∂T) P = -1.1 × 10 -2 GPa K -1 . From these EOS parameters, we calculate heat capacit at constant volume (C V ) and thermodynamic Grüneisen parameter (γ TH ) as a function o temperature. At ambient conditions, the calculated γTH is 1.055, which is in good agreemen with the value (1.09) previously obtained from density functional theory (DFT). The obtaine C V, however, is 13% larger than that calculated from the first-principles calculations indicating that the dispersion correction in the DFT calculations may need to be furthe improved for describing intermolecular interactions of molecular crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Source of Bright Near-Infrared Luminescence in Gold Nanoclusters

Gold nanoclusters with near-infrared (NIR) photoluminescence (PL) have great potential as sensing and imaging materials in biomedical and bioimaging applications. In this work, Au 21 (S-Adm) 15 and Au 38 S 2 (S-Adm) 20 are used to unravel the underlying mechanisms for the improved quantum yields (QY), large Stokes shifts and long PL lifetimes in gold nanoclusters. Both nanoclusters show decent PL QY. In particular, the Au 38 S 2 (S-Adm) 20 nanocluster shows a bright NIR PL at 900 nm with QY up to 15% in normal solvents (such as toluene) at ambient conditions. The relatively lower QY for Au 21 (S-Adm) 15 (4%) compared to Au 38 S 2 (S-Adm) 20 is attributed to the lowest-lying excited state being symmetry-disallowed, as evidenced by the pressure-dependent anti-spectral shift of the absorption spectra compared to PL. Yet, Au 21 (S-Adm) 15 maintains some emissive properties due to a nearby symmetry-allowed excited state. Furthermore, our results show that suppression of non-radiative decay due to the surface “lock rings” which encircle the Au kernel and the surface “lock atoms” which bridge the fundamental Au-kernel units (e.g., tetrahedra, icosahedra, etc.) is the key to obtain high QYs in gold nanoclusters. Here, the complicated excited-state processes and the small absorption coefficient of the band-edge transition lead to the large Stokes shifts and the long PL lifetimes that are widely observed in gold nanoclusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of a Two-Phase Jet Pump with Phase Change, Shocks and Temperature-Dependent Properties

One of the primary motivations behind this work is the attempt to understand the physics of a two-phase jet pump which constitutes part of a flow boiling test facility at NASA-Marshall. The flow boiling apparatus is intended to provide data necessary to design highly efficient two-phase thermal control systems for aerospace applications. The facility will also be capable of testing alternative refrigerants and evaluate their performance using various heat exchangers with enhanced surfaces. The test facility is also intended for use in evaluating single-phase performance of systems currently using CFC refrigerants. Literature dealing with jet pumps is abundant and covers a very wide array of application areas. Example application areas include vacuum pumps which are used in the food industry, power station work, and the chemical industry; ejector systems which have applications in the aircraft industry as cabin ventilators and for purposes of jet thrust augmentation; jet pumps which are used in the oil industry for oil well pumping; and steam-jet ejector refrigeration, to just name a few. Examples of work relevant to this investigation includes those of Fairuzov and Bredikhin (1995). While past researchers have been able to model the two-phase flow jet pump using the one-dimensional assumption with no shock waves and no phase change, there is no research known to the author apart from that of Anand (1992) who was able to account for condensation shocks. Thus, one of the objectives of this work is to model the dynamics of fluid interaction between a two-phase primary fluid and a subcooled liquid secondary fluid which is being injected employing atomizing spray injectors. The model developed accounts for phase transformations due to expansion, compression, and mixing. It also accounts for shock waves developing in the different parts of the jet pump as well as temperature and pressure dependencies of the fluid properties for both the primary two-phase mixture and the secondary subcooled liquid. The research effort on which this document partly reports described a relatively simple model capable of describing the performance of a two-phase flow jet pump. The model is based on the isentropic homogeneous expansion/compression hypothesis and is capable of fully incorporating the effects of shocks in both the mixing chamber and the throat/diffuser parts of the pump. The physical system chosen is identical to that experimentally tested by Fairuzov and Bredikhin (1995) and should therefore be relatively easy to validate.

Sherif, S. A.↗

High Pressure IR Studies of Correlated Electron Materials at SPring-8

The highly bright infrared (IR) synchrotron radiation from SPring-8 offers various research opportunities, including high pressure IR studies of correlated electron materials using a diamond anvil cell. We present our recent results on the reflectivity studies of an f electron compound CeRu{sub 4}Sb{sub 12}, at high pressure up to 8 GPa and at low temperature down to 40 K, measured in both far- and mid-IR ranges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗