Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTICLE PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Changes in Plants Developed from Imbibed Seeds Irradiated by Simulated Solar Particle Events

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk primarily from solar particle events (SPEs) and galactic cosmic rays (GCRs). With the goal of manned Mars exploration, the production of fresh food during long duration space missions may provide nutritional supplementation and benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. In this study, we evaluated the effect of simulated SPEs on imbibed seeds of mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated SPEs (0, 40, 80 cGy, and 200 cGy), either acutely or at a low dose rate (LDR only for 40 and 80 cGy doses), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Simulated SPE exposure was achieved using sequential exposures to protons with a broad energy range at 50-150 MeV/n. Control and irradiated seeds were planted either onto 0.5% MS-based agar plates containing required nutrients for early seedling analysis, or in peat plugs/pots for 28 day (mizuna and lettuce) and 91 day (tomato) grow outs. All plants were maintained under space-vehicle relevant controlled environment conditions at 3000 ppm CO2, 50% RH, and 23°C, and a 16/8 h photoperiod with 300 μmol·m-2·s-1 photosynthetically active radiation. Plant/fruit morphometrics and edible fresh mass were measured. In addition, nutrient analyses were performed for both mizuna and ripe tomatoe fruit. Seedlings from irradiated seeds (both 40 cGy and 80 cGy) showed significant changes in cotyledon development, as well as root length. Interestingly, small, but significant changes in vitamin content were found in mizuna and tomato fruits grown from 80 cGy (LDR) irradiated seeds. In addition, 80 cGy (LDR) simulated SPEs significantly affected tomato early seedling development, plant growth, and the quantity of fruits produced from the surviving plants. Generally, compared to 80 cGy, 40 cGy (LDR) of simulated SPEs displayed some impacts to the seeds and seedlings, but to a much lesser degree. (This study was supported by NASA Human Research Program.)

J.T. Richards↗
NASA NTRSDate not supplied

Impact of Space Radiation on Plants: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. In this study, we evaluated the effect of simulated GCR (using dry seeds) or SPE (using hydrated seeds) on seeds of Arabidopsis, Mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated space radiation scenarios, either acutely or at a low dose rate (LDR), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Exposure to simulated GCR or SPE at the levels tested had no significant impact on the germination rate in Arabidopsis and crop seeds; however, GCR reduced the viability of lettuce and tomato seeds. Overall, the morphological changes of the seedlings cultured from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Both 40 and 80 cGy (LDR) exposures of GCR or SPE significantly affected tomato early seedling development, delayed tomato fruiting, and reduced the total yield of tomato. Altered nutritional values were also found in edible biomass, especially for the GCR 80 cGy (LDR) groups. For both GCR and SPE, 40 cGy showed some effects, but to a much lesser extent compared with 80 cGy, which can be considered as the “maximum permissible exposure” for the seed types we evaluated in this study. The impact of space radiation on seeds potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated. This research is funded by NASA’s Human Research Program.

J T Richards↗
NASA NTRSDate not supplied

Changes in Plants Developed from Imbibed Seeds Irradiated by Simulated Solar Particle Events

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk primarily from solar particle events (SPEs) and galactic cosmic rays (GCRs). With the goal of manned Mars exploration, the production of fresh food during long duration space missions may provide nutritional supplementation and benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. In this study, we evaluated the effect of simulated GCRs on dry seeds of mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated GCRs (0, 40, and 80 cGy), either acutely or at a low dose rate (LDR), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Control and irradiated seeds were planted and maintained under space-vehicle relevant controlled environment conditions. Plant/fruit morphometrics and edible fresh mass were measured. In addition, nutrient analyses were performed for both mizuna and ripe tomatoe fruit. Seedlings from irradiated seeds (both 40 cGy and 80 cGy) showed significant changes in cotyledon development, but not in root length or morphology. Interestingly, significant changes in vitamin content were found in mizuna grown from 80 cGy (LDR) irradiated seeds. In addition, 80 cGy (LDR) simulated GCRs significantly affected lettuce and tomato seed quality, delayed tomato fruiting, and reduced the total yield of tomato. Generally, compared to 80 cGy, 40 cGy (LDR) of simulated GCRs displayed some impacts to the seeds and seedlings, but to a much lesser degree. (This study was supported by NASA Human Research Program.)

J.T. Richards↗
NASA NTRSDate not supplied

Impact of Space Radiation on Plant Seeds: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. In this study, we evaluated the effect of simulated GCR (using dry seeds) or SPE (using hydrated seeds) on seeds of Arabidopsis, Mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated space radiation scenarios, either acutely or at a low dose rate (LDR), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Exposure to simulated GCR or SPE at the levels tested had no significant impact on the germination rate in Arabidopsis and crop seeds; however, GCR reduced the viability of lettuce and tomato seeds. Overall, the morphological changes of the seedlings cultured from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Both 40 and 80 cGy (LDR) exposures of GCR or SPE significantly affected tomato early seedling development, delayed tomato fruiting, and reduced the total yield of tomato. Altered nutritional values were also found in edible biomass, especially for the GCR 80 cGy (LDR) groups. For both GCR and SPE, 40 cGy showed some effects, but to a much lesser extent compared with 80 cGy, which can be considered as the “maximum permissible exposure” for the seed types we evaluated in this study. The impact of space radiation on seeds potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated. This research is funded by NASA’s Human Research Program.

J T Richards↗
NASA NTRSDate not supplied

Impact of Space Radiation on Plant Seeds: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. This is the final report of our project to summarize the findings of the effect of space radiation exposure on plant seeds from morphometrics, nutritional values, to molecular machenisms. In this study, we evaluated the effect of simulated GCR (using dry seeds) or SPE (using hydrated seeds) on seeds of Arabidopsis, Mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated space radiation scenarios, either acutely or at a low dose rate (LDR), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Exposure to simulated GCR or SPE at the levels tested had no significant impact on the germination rate in Arabidopsis and crop seeds; however, GCR reduced the viability of lettuce and tomato seeds. Overall, the morphological changes of the seedlings cultured from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Both 40 and 80 cGy (LDR) exposures of GCR or SPE significantly affected tomato early seedling development, delayed tomato fruiting, and reduced the total yield of tomato. Altered nutritional values were also found in edible biomass, especially for the GCR 80 cGy (LDR) groups. Underlying mechanisms were furtherly evaluated using transcriptomic analysis. For both GCR and SPE, 40 cGy showed some effects, but to a much lesser extent compared with 80 cGy, which can be considered as the “maximum permissible exposure” for the seed types we evaluated in this study. The impact of space radiation on seeds potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated. This research is funded by NASA’s Human Research Program.

J T Richards↗
NASA NTRSDate not supplied

Impact of Space Radiation on Plant Seeds: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. This is the final report of our project to summarize the findings of the effect of space radiation exposure on plant seeds from morphometrics, nutritiaonal values, to molecular machenisms. In this study, we evaluated the effect of simulated GCR (using dry seeds) or SPE (using hydrated seeds) on seeds of Arabidopsis, Mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated space radiation scenarios, either acutely or at a low dose rate (LDR), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Exposure to simulated GCR or SPE at the levels tested had no significant impact on the germination rate in Arabidopsis and crop seeds; however, GCR reduced the viability of lettuce and tomato seeds. Overall, the morphological changes of the seedlings cultured from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Both 40 and 80 cGy (LDR) exposures of GCR or SPE significantly affected tomato early seedling development, delayed tomato fruiting, and reduced the total yield of tomato. Altered nutritional values were also found in edible biomass, especially for the GCR 80 cGy (LDR) groups. Underlying mechanisms were furtherly evaluated using transcriptomic analysis. For both GCR and SPE, 40 cGy showed some effects, but to a much lesser extent compared with 80 cGy, which can be considered as the “maximum permissible exposure” for the seed types we evaluated in this study. The impact of space radiation on seeds potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated. This research is funded by NASA’s Human Research Program.

J.T. Richards↗
NASA NTRS1996

Application of Two-Phase CFD to the Design and Analysis of a Subscale Motor Experiment to Evaluate Propellant Slag Production

The redesigned solid rocket motor (RSRM) Pressure Perturbation Investigation Team concluded that the cause of recent pressure spikes during both static and flight motor burns was the expulsion of molten aluminum oxide slag from a pool which collects in the aft end of the motor around the submerged nozzle nose during the last half of motor operation. It is suspected that some motors produce more slag than others due to differences in aluminum oxide agglomerate particle sizes which may relate to subtle differences in propellant ingredient characteristics such as particle size distribution, contaminants, or processing variations. In order to determine the effect of suspect propellant ingredient characteristics on the propensity for slag production in a real motor environment, a subscale motor experiment was designed. An existing 5 inch ballistic test motor was selected as the basic test vehicle due to low cost and quick turn around times. The standard converging/diverging nozzle was replaced with a submerged nozzle nose design to provide a positive trap for the slag which would increase both the quantity and repeatability of measured slag weights. Computational fluid dynamics (CFD) was used to assess a variety of submerged nose configurations to identify the design which possessed the best capability to reliably collect slag. CFD also was used to assure that the final selected nozzle design would result in flow field characteristics such as dividing streamline location, nose attach point, and separated flow structure which would have similtude with the RSRM submerged nozzle nose flow field. It also was decided to spin the 5 inch motor about its longitudinal axis to further enhance slag collection quantities. Again, CFD was used to select an appropriate spin rate along with other considerations, including the avoidance of burn rate enhancement from radial acceleration effects.

Whitesides, R. Harold↗
NASA NTRS1988

A source map for dust jets observed in the coma of Comet P/Halley

In this paper, the large-scale enhancements of about 50 s duration in the flux of submicron dust particles from Comet P/Halley recorded by the Dust Counter and Mass Analyzer carried aboard the two Vega spaceprobes are traced back to their source departure points on the nucleus. Evidence is presented that such enhancements which correspond to regions of enhanced particle density in the coma with spatial widths of about 4000 km, are superimposed upon a background flux distribution which is well described by a simple fountain model. Thus, dust production on the sunlit hemisphere of the nucleus is characterized by discrete jet sources superimposed upon relatively low-level isotropic emission. The jet sources at the nucleus responsible for the major enhancements in recorded particle impact rates are narrow and discrete, with each jet accelerating about 10 to the -13th g particles to a narrow range of terminal velocities which decrease with increasing particle mass.

Rabinowitz, D. L.↗
NASA NTRS1984

High Energy Particle Effects in the D Region During and After Geomagnetic Storms

The precipitation of energetic particles from the magnetosphere produces a remarkable modification of the mid-latitude D-region structure during daytime and at dawn and dusk conditions. Beside the heavily fluctuating precipitation during the main storm phase, there exists a more continuous input of high energy electrons into the mesosphere in the belt between phi= 50 deg and the auroral zone up to ten days after the disturbance. The excessive D-region ionization, the after-effect of geomagnetic storms, is caused at least partly by additional nitric oxide production. The winter anomaly effects are especially amplified and prolonged by this effect. The source of this mid-latitude particle precipitation is thought to be situated in magnetospheric slot region processes.

Lauter, E. A.↗
NASA NTRS2022

Pair Production Detectors for Gamma-ray Astrophysics

Electron-positron pair production is the essential process for high-energyγ-ray astrophysical observations. Following the pioneeringOSO-3counter telescope, the field evolved into use of particle tracking instruments, largely derived from high-energy physics detectors. Although many of the techniques were developed on balloon-borneγ-ray telescopes, the need to escape the high background in the at-mosphere meant that the breakthrough discoveries came from theSAS-2andCOS-Bsatellites. The next major pair production success was EGRET on the Comp-ton Gamma Ray Observatory, which provided the first all-sky map at energies above 100 MeV and found a variety ofγ-ray sources, many of which were vari-able. The current generation of pair production telescopes,AGILEandFermiLAT,have broadened high-energyγ-ray astrophysics with particular emphasis on multi-wavelength and multimessenger studies. A variety of options remain open for future missions based on pair production with improved instrumental performance.

Gamma rays↗
NASA NTRS2000

Aerogel Projects Ongoing in MSFC's Engineering Directorate

When we speak of an aerogel material, we are referring more to process and structure am to a specific substance. Aerogel, considered the lightest solid material, has been made from silica for seventy years. Resorcinol-formaldehyde, organic aerogels have been developed more recently. However, aerogel can be made from almost any type of substance, even lead. Because an aerogel is mostly air (about 99 %), the solid substance used will affect the weight very little. The term "aerogel" connotes the sol-gel process used to manufacture the material. The aerogel begins as a liquid "sol," becomes a solid "alcogel," and is then dried to become an "aerogel." The final product has a unique structure, useful for exploitation. It is an "open pore" system with nano-sized particles and pores, has very high surface area, and is highly interconnected. Besides low weight, aerogels have ultimate (lowest) values in other properties: thermal conductivity, refractive index, sound speed, and dielectric constant. Aerogels were first prepared in 1931 by Steven Kistler, who used a supercritical drying step to replace the liquid in a gel with air, preserving the structure (1). Kistler's procedure involved a water-to-alcohol exchange step; in the 1970's, this step was eliminated when a French investigator introduced the use of tetramethylorthosilicate. Still, alcohol drying involved dangerously high temperatures and pressures. In the 1980's, the Microstructured Materials Group at Berkeley Laboratory found that the alcohol in the gel could be replaced with liquid carbon dioxide before supercritical drying, which greatly improved safety (2). 'Me most recent major contribution has been that of Deshpande, Smith and Brinker in New Mexico, who are working to eliminate the supercritical drying step (3). When aerogels were first being developed, they were evaporatively dried. However, the wet gel, when dried, underwent severe shrinkage and cracking; this product was termed "xerogel." When the autoclave drying step was introduced, the final product was without cracks and showed only minimal shrinkage; this product was termed "aerogel." In the 1990's, Deshpande, Smith and Brinker developed an evaporative drying procedure in which the wet gel is chemically "capped" so that the material, which undergoes shrinkage, springs back to its original size when evaporatively dried. This new type of xerogel, while uncracked and almost the same size as the wet gel, differs from the autoclave-dried product in that it is less porous (approximately 70%, as compared to 99% for aerogels).

Shular, David A.↗
NASA NTRS2014

Snowfall Rate Retrieval using NPP ATMS Passive Microwave Measurements

Passive microwave measurements at certain high frequencies are sensitive to the scattering effect of snow particles and can be utilized to retrieve snowfall properties. Some of the microwave sensors with snowfall sensitive channels are Advanced Microwave Sounding Unit (AMSU), Microwave Humidity Sounder (MHS) and Advance Technology Microwave Sounder (ATMS). ATMS is the follow‐on sensor to AMSU and MHS. Currently, an AMSU and MHS based land snowfall rate (SFR) product is running operationally at NOAA/NESDIS. Based on the AMSU/MHS SFR, an ATMS SFR algorithm has been developed recently. The algorithm performs retrieval in three steps: snowfall detection, retrieval of cloud properties, and estimation of snow particle terminal velocity and snowfall rate. The snowfall detection component utilizes principal component analysis and a logistic regression model. The model employs a combination of temperature and water vapor sounding channels to detect the scattering signal from falling snow and derive the probability of snowfall (Kongoli et al., 2014). In addition, a set of NWP model based filters is also employed to improve the accuracy of snowfall detection. Cloud properties are retrieved using an inversion method with an iteration algorithm and a two‐stream radiative transfer model (Yan et al., 2008). A method developed by Heymsfield and Westbrook (2010) is adopted to calculate snow particle terminal velocity. Finally, snowfall rate is computed by numerically solving a complex integral. The ATMS SFR product is validated against radar and gauge snowfall data and shows that the ATMS algorithm outperforms the AMSU/MHS SFR.

Meng, Huan↗
NASA NTRS2021

Reanalysis Surface Mass Balance of the Greenland Ice Sheet along K-transect (2000-2014)

Accurate estimates of surface mass balance over the Greenland ice sheet (GrIS) would contribute to understanding the cause of recent changes and would help to better estimate the future contribution of the GrIS to sea-level rise. Given the limitations of in-situ measurement, modeling, and remote sensing, it is critical to explore the opportunity to merge the available data to better characterize the spatial and temporal variation of the GrIS surface mass balance (SMB). This work utilizes a particle batch smoother data assimilation technique that yields SMB estimates that benefit from the snow model Crocus and a 16-day albedo product derived from satellite remote sensing data. Comparison of the results against in-situ SMB measurements shows that the assimilation of the albedo product reduces the root mean square error (RMSE) of the posterior estimates of SMB by 51% and reduces bias by 95%.

Greenland Ice Sheet↗
NASA NTRS1993

Use of particle beams for lunar prospecting

A key issue in choosing the appropriate site for a manned lunar base is the availability of resources, particularly oxygen and hydrogen for the production of water, and ores for the production of fuels and building materials. NASA has proposed two Lunar Scout missions that would orbit the Moon and use, among other instruments, a hard X-ray spectrometer, a neutron spectrometer, and a Ge gamma ray spectrometer to map the lunar surface. This passive instrumentation will have low resolution (tens of kilometers) due to the low signal levels produced by natural radioactivity and the interaction of cosmic rays and the solar wind with the lunar surface. This paper presents the results of a concept definition effort for a neutral particle beam lunar mapper probe. The idea of using particle beam probes to survey asteroids was first proposed by Sagdeev et al., and an ion beam device was fielded on the 1988 Soviet probe to the Mars moon Phobos. During the past five years, significant advances in the technology of neutral particle beams (NPB) have led to a suborbital flight of a neutral hydrogen beam device in the SDIO-sponsored BEAR experiment. An orbital experiment, the Neutral Particle Beam Far Field Optics Experiment (NPB-FOX) is presently in the preliminary design phase. The development of NPB accelerators that are space-operable leads one to consider the utility of these devices for probing the surface of the Moon using gamma ray, X-ray, and optical/UV spectroscopy to locate various elements and compounds. We consider the utility of the NPB-FOX satellite containing a 5-MeV particle beam accelerator as a probe in lunar orbit. Irradiation of the lunar surface by the particle beam will induce secondary and back scattered radiation from the lunar surface to be detected by a sensor that may be co-orbital with or on the particle beam satellite platform, or may be in a separate orbit. The secondary radiation is characteristic of the make-up of the lunar surface. The size of the spot irradiated by the beam is less than 1 km wide along the ground track of the satellite, resulting in the potential for high resolution. The fact that the probe could be placed in polar orbit would result in global coverage of the lunar surface. The orbital particle beam probe could provide the basis for selection of sites for more detailed prospecting by surface rovers.

Toepfer, A. J.↗
NASA NTRS2009

Improvements in Production of Single-Walled Carbon Nanotubes

A continuing program of research and development has been directed toward improvement of a prior batch process in which single-walled carbon nanotubes are formed by catalytic disproportionation of carbon monoxide in a fluidized-bed reactor. The overall effect of the improvements has been to make progress toward converting the process from a batch mode to a continuous mode and to scaling of production to larger quantities. Efforts have also been made to optimize associated purification and dispersion post processes to make them effective at large scales and to investigate means of incorporating the purified products into composite materials. The ultimate purpose of the program is to enable the production of high-quality single-walled carbon nanotubes in quantities large enough and at costs low enough to foster the further development of practical applications. The fluidized bed used in this process contains mixed-metal catalyst particles. The choice of the catalyst and the operating conditions is such that the yield of single-walled carbon nanotubes, relative to all forms of carbon (including carbon fibers, multi-walled carbon nanotubes, and graphite) produced in the disproportionation reaction is more than 90 weight percent. After the reaction, the nanotubes are dispersed in various solvents in preparation for end use, which typically involves blending into a plastic, ceramic, or other matrix to form a composite material. Notwithstanding the batch nature of the unmodified prior fluidized-bed process, the fluidized-bed reactor operates in a continuous mode during the process. The operation is almost entirely automated, utilizing mass flow controllers, a control computer running software specific to the process, and other equipment. Moreover, an important inherent advantage of fluidized- bed reactors in general is that solid particles can be added to and removed from fluidized beds during operation. For these reasons, the process and equipment were amenable to modification for conversion from batch to continuous production.

Balzano, Leandro↗
NASA NTRS2020

The Precipitation Imaging Package: Assessment of Microphysical and Bulk Characteristics of Snow

Remote-sensing observations are needed to estimate the regional and global impacts of snow. However, to retrieve accurate estimates of snow mass and rate, these observations require augmentation through additional information and assumptions about hydrometeor properties. The Precipitation Imaging Package (PIP) provides information about precipitation characteristics and can be utilized to improve estimates of snowfall rate and accumulation. Here, the goal is to demonstrate the quality and utility of two higher-order PIP-derived products: liquid water equivalent snow rate and an approximation of volume-weighted density called equivalent density. Accuracy of the PIP snow rate and equivalent density is obtained through intercomparison with established retrieval methods and through evaluation with colocated ground-based observations. The results confirm the ability of the PIP-derived products to quantify properties of snow rate and equivalent density, and demonstrate that the PIP produces physically realistic snow characteristics. When compared to the National Weather Service (NWS) snow field measurements of six-hourly accumulation, the PIP-derived accumulations were biased only +2.48% higher. Additionally, this work illustrates fundamentally different microphysical and bulk features of low and high snow-to-liquid ratio events, through assessment of observed particle size distributions, retrieved mass coefficients, and bulk properties. Importantly, this research establishes the role that PIP observations and higher-order products can serve for constraining microphysical assumptions in ground-based and spaceborne remotely sensed snowfall retrievals.

Claire Pettersen↗