Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PALLADIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Using supported Au nanoparticles as starting material for preparing uniform Au/Pd bimetallic catalysts

One of the best methods for producing bulk homogeneous (composition) supported bimetallic AuPd clusters involves the immobilization of a protected Au seed followed by the addition of Pd. This paper investigates the importance of this gold seed in controlling the resulting bimetallic AuPd clusters structures, sizes and catalytic activities by investigating three different gold seeds. Uniform Au-Pd alloy were obtained when a steric/electrostatic protecting group, poly(vinyl alcohol) (PVA), was used to form the gold clusters on activated carbon (AC). In contrast Au/AC precursors prepared using Au nanoparticles with only electrostatic stabilization (tetrakis(hydroxypropyl)phosphonium chloride (THPC)), or no stabilization (magnetron sputtering) produced inhomogeneous alloys and segregation of the gold and palladium. The uniform alloyed catalyst (Pd{at}Au{sub PVA}/AC) is the most active and selective catalyst, while the inhomogenous catalysts are less active and selective. Further study of the PVA protected Au clusters revealed that the amount of PVA used is also critical for the preparation of uniform alloyed catalyst, their stability, and their catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetics of silicide formation over a wide range of heating rates spanning six orders of magnitude

Kinetic processes involving intermediate phase formation are often assumed to follow an Arrhenius temperature dependence. This behavior is usually inferred from limited data over narrow temperature intervals, where the exponential dependence is generally fully satisfied. However, direct evidence over wide temperature intervals is experimentally challenging and data are scarce. Here, we report a study of silicide formation between a 12 nm film of palladium and 15 nm of amorphous silicon in a wide range of heating rates, spanning six orders of magnitude, from 0.1 to 10{sup 5 }K/s, or equivalently more than 300 K of variation in reaction temperature. The calorimetric traces exhibit several distinct exothermic events related to interdiffusion, nucleation of Pd{sub 2}Si, crystallization of amorphous silicon, and vertical growth of Pd{sub 2}Si. Interestingly, the thickness of the initial nucleation layer depends on the heating rate revealing enhanced mass diffusion at the fastest heating rates during the initial stages of the reaction. In spite of this, the formation of the silicide strictly follows an Arrhenius temperature dependence over the whole temperature interval explored. A kinetic model is used to fit the calorimetric data over the complete heating rate range. Calorimetry is complemented by structural analysis through transmission electron microscopy and both standard and in-situ synchrotron X-ray diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical investigation on structural and electronic properties of PdO{sub 2}

Theoretical studies on rutile type Palladium Dioxide were carried out with the aim of analyzing structural and electronic properties at ambient condition using the first principle calculation based on density functional theory. Within the framework of density functional theory, we used full potential linearized augmented plane wave method(FP-LAPW) in Wien 2k code. The exchange and correlation effect is treated with generalized gradient approximation (GGA) using the Perdew, Burke and Eruzeroff form. The charge density plots, density of states and band structure are plotted and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-E-T-123: Anomalous Altitude Effect in Permanent Implant Brachytherapy Seeds

Purpose: Permanent seed implant brachytherapy procedures require the measurement of the air kerma strength of seeds prior to implant. This is typically accomplished using a well-type ionization chamber. Previous measurements (Griffin et al., 2005; Bohm et al., 2005) of several low-energy seeds using the air-communicating HDR 1000 Plus chamber have demonstrated that the standard temperature-pressure correction factor, P{sub TP}, may overcompensate for air density changes induced by altitude variations by up to 18%. The purpose of this work is to present empirical correction factors for two clinically-used seeds (IsoAid ADVANTAGE™ {sup 103}Pd and Nucletron selectSeed {sup 125}I) for which empirical altitude correction factors do not yet exist in the literature when measured with the HDR 1000 Plus chamber. Methods: An in-house constructed pressure vessel containing the HDR 1000 Plus well chamber and a digital barometer/thermometer was pumped or evacuated, as appropriate, to a variety of pressures from 725 to 1075 mbar. Current measurements, corrected with P{sub TP}, were acquired for each seed at these pressures and normalized to the reading at ‘standard’ pressure (1013.25 mbar). Results: Measurements in this study have shown that utilization of P{sub TP} can overcompensate in the corrected current reading by up to 20% and 17% for the IsoAid Pd-103 and the Nucletron I-125 seed respectively. Compared to literature correction factors for other seed models, the correction factors in this study diverge by up to 2.6% and 3.0% for iodine (with silver) and palladium respectively, indicating the need for seed-specific factors. Conclusion: The use of seed specific altitude correction factors can reduce uncertainty in the determination of air kerma strength. The empirical correction factors determined in this work can be applied in clinical quality assurance measurements of air kerma strength for two previously unpublished seed designs (IsoAid ADVANTAGE™ {sup 103}Pd and Nucletron selectSeed {sup 125}I) with the HDR 1000 Plus well chamber.

07 ISOTOPE AND RADIATION SOURCES↗

Long- and short-range order in the Pd{sub 6}B monoclinic superstructure and M{sub 6}X{sub 5} and M{sub 6}X allied superstructures

Symmetry analysis of the Pd{sub 6}B monoclinic superstructure (space group C2/c) formed in the cubic (with the B1 structure) solid solution of boron in palladium (PdB{sub y}) has been carried out. The formation of this superstructure proceeds as a first-order phase transition via the disorder-order channel including nine nonequivalent superstructure vectors of four stars {l_brace}k{sub 10}{r_brace}, {l_brace}k{sub 4}{r_brace}, {l_brace}k{sub 3}{r_brace}, and {l_brace}k{sub 0}{r_brace}. For the Pd{sub 6}B monoclinic super-structure (space group C2/c), the distribution function for boron atoms is calculated and the interval of admissible values of the long-range order parameters is defined. It is shown that the transition channel determined in this way coincides with the channel in which the M{sub 6}X monoclinic superstructure (space group C2) is formed; therefore, the Pd{sub 6}B superstructure can also be described in space group C2 to the same degree of accuracy. The higher symmetry of the monoclinic model (space group C2/c) suggests that it describes the structure of the Pd{sub 6}B phase (Pd{sub 6}B{open_square}{sub 5}), as well as of mutually inverse phases M{sub 6}X{open_square}{sub 5} and M{sub 6}X{sub 5}{open_square}, more adequately than the model with space group C2. It is shown that superstructures of the M{sub 6}X{open_square}{sub 5} type (space groups C2/c, C2, C2/m, and P3{sub 1}) and inverse superstructures of the M{sub 6}X{sub 5}{open_square} type with the same space groups have the positions of the nearest surrounding of metal atoms by two types of nonmetallic sublattice sites located in the first and second coordination spheres.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Dragging Effect in Ag/Pd Nanocomposite Film: Generation of Bipolar Pulses

Characteristic features of the phenomenon of longitudinal photocurrent generation in Ag/Pd nanocomposite films under the obliquely incident nanosecond pulsed laser irradiation with wavelengths in the 1350–4000 nm range have been studied for the first time. Films of 20-μm thickness consisting of nanocrystals of Ag–Pd solid solution and palladium oxide (PdO) were obtained using a thick-film technology. The influence of radiation wavelength on photocurrent pulses has been studied for s- and p-polarized laser pumping. It is established that the photocurrent pulses generated by s-polarized pumping in the 1350–4000 nm wavelength range are monopolar, while p-polarized pumping can generate both mono- and bipolar pulses depending on the wavelength. The obtained results are explained by simultaneous generation of photocurrent due to the dragging effect and the surface photogalvanic effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Co‐Electrolysis of CO 2 and H 2 O to Syngas on Bimetallic Pd x Cu 1‐ x Catalysts for Tandem Thermochemical Conversion to Carbon Nanofibers

Electrification of chemical production using renewable energy and abundant feedstocks offers a promising pathway for decarbonizing the chemical industry. Current efforts on CO 2 valorization largely focus on making chemicals and fuels. Here, to help achieve net-negative emissions through long-term carbon storage, this study aims to develop efficient electrocatalysts for a tandem electrochemical-thermochemical process to convert CO 2 into carbon nanofibers (CNFs). CO 2 and water are first electrochemically reduced in a membrane electrode assembly (MEA) electrolyzer to produce syngas (CO + H 2 ), which is subsequently fed into a thermochemical packed bed reactor to facilitate CNF growth. This work systematically evaluated Pd x Cu 1-x bimetallic electrocatalysts to assess the effect of Pd–Cu alloying on enhancing syngas production while reducing Pd loading. Transmission electron microscopy and Raman spectroscopy confirmed the formation of high-purity, crystalline CNFs, regardless of the syngas composition from the MEA. In situ X-ray absorption spectroscopy and X-ray diffraction measurements revealed that increasing Cu content in the Pd x Cu 1-x alloy progressively inhibited palladium hydride formation, consistent with DFT calculations on the stability of Pd x Cu 1-x under reducing electrochemical potentials.

58 GEOSCIENCES↗

Chelating N-Heterocyclic Carbene Ligands Enable Tuning of Electrocatalytic CO 2 Reduction to Formate and Carbon Monoxide: Surface Organometallic Chemistry

Reported here is the chelate effect as a design principle for tuning heterogeneous catalysts for electrochemical CO 2 reduction. Palladium functionalized with a chelating tris-N-heterocyclic carbene (NHC) ligand (Pd-timtmbMe) exhibits a 32-fold increase in activity for electrochemical reduction of CO 2 to C1 products with high Faradaic efficiency (FE C1 =86 %) compared to the parent unfunctionalized Pd foil (FE=23 %), and with sustained activity relative to a monodentate NHC-ligated Pd electrode (Pd-mimtmb Me ). Here, the results highlight the contributions of the chelate effect for tailoring and maintaining reactivity at molecular-materials interfaces enabled by surface organometallic chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enantioselective Intramolecular Allylic Substitution via Synergistic Palladium/Chiral Phosphoric Acid Catalysis: Insight into Stereoinduction through Statistical Modeling

The mode of asymmetric induction in an enantioselective intramolecular allylic substitution reaction catalyzed by a combination of palladium and a chiral phosphoric acid was investigated by a combined experimental and statistical modeling approach. Experiments to probe nonlinear effects, the reactivity of deuterium-labeled substrates, and control experiments revealed that nucleophilic attack to the π-allylpalladium intermediate is the enantio-determining step, in which the chiral phosphate anion is involved in stereoinduction. Here, using multivariable linear regression analysis, we determined that multiple noncovalent interactions with the chiral environment of the phosphate anion are integral to enantiocontrol in the transition state. The synthetic protocol to form chiral pyrrolidines was further applied to the asymmetric construction of C-O bonds at fully substituted carbon centers in the synthesis of chiral 2,2-disubstituted benzomorpholines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nitrogen Atom Transfer Catalysis by Metallonitrene C−H Insertion: Photocatalytic Amidation of Aldehydes

Abstract C−H amination and amidation by catalytic nitrene transfer are well‐established and typically proceed via electrophilic attack of nitrenoid intermediates. In contrast, the insertion of (formal) terminal nitride ligands into C−H bonds is much less developed and catalytic nitrogen atom transfer remains unknown. We here report the synthesis of a formal terminal nitride complex of palladium. Photocrystallographic, magnetic, and computational characterization support the assignment as an authentic metallonitrene (Pd−N) with a diradical nitrogen ligand that is singly bonded to Pd II . Despite the subvalent nitrene character, selective C−H insertion with aldehydes follows nucleophilic selectivity. Transamidation of the benzamide product is enabled by reaction with N 3 SiMe 3 . Based on these results, a photocatalytic protocol for aldehyde C−H trimethylsilylamidation was developed that exhibits inverted, nucleophilic selectivity as compared to typical nitrene transfer catalysis. This first example of catalytic C−H nitrogen atom transfer offers facile access to primary amides after deprotection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Pd(II)-Functionalized Covalent Organic Framework for Catalytic Conjugate Additions of Arylboronic Acids to β,β-Disubstituted Enones

A palladium(II)-functionalized covalent organic framework (Pd@TpBpy COF) built from 1,3,5-triformylphloroglucinol (Tp) and [2,2'-bipyridine]-5,5'-diamine (Bpy) is reported as a recyclable catalyst for conjugate additions in aqueous media. Additions of an array of stereoelectronically diverse arylboronic acid nucleophiles to β,β-disubstituted enones form a variety of ketones containing benzylic all-carbon quaternary centers in up to 92 % isolated yield. Research on the recyclability of Pd@TpBpy COF demonstrate this catalyst remains active through at least 7 cycles and shows superior stability to related MOF catalysts with bipyridine linker units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Magnetic Properties of Co{sub 100−x}Pd{sub x} Thin Films Evaporated on Si (100) Substrate

The structural and magnetic properties of Co{sub 100−x}Pd{sub x} thin films grown under vacuum by physical vapor deposition (PVD) on Si (100) are reported. The thicknesses of the samples were measured with a DEKTAK 150 profilometer; chemical composition was analyzed by energy dispersive X-ray analyses (EDX). Microscopic characterizations of the films were done with X-ray diffraction (XRD) and we conclude that all the samples were polycristalline with an hcp structure. The hysteresis loops are performed by means of vibrating sample magnetometer (VSM) and we point up that all the samples present a planar ferromagnetic anisotropy. The saturation magnetization decreases as the palladium content increases and high values of the squareness up to 0.62 were measured. All these results are analyzed and correlated.

36 MATERIALS SCIENCE↗

Characteristics of Hydrogen Sensors Based on Thin Tin Dioxide Films Modified with Gold

Effect of hydrogen in the concentration range from 10 to 2000 ppm on the characteristics of sensors based on thin films of tin dioxide modified with gold (Au/SnO{sub 2}:Sb, Au) is studied in the thermo-cyclic mode at temperatures from 623 to 773 K and absolute humidity from 2.5 to 20 g/m{sup 3}. Experimental data are discussed using expressions obtained within the framework of a model that takes into account the presence of three types of adsorbed particles (O¯, OH, and OH¯) on the surface of SnO{sub 2} nanocrystals. The characteristics of the sensors based on thin Pt/Pd/SnO{sub 2}:Sb films (the first series) are compared with those of Au/SnO{sub 2}:Sb, Au films (the second series). It is found that the degree of dissociation of molecular hydrogen into atoms during adsorption on the sensor under interaction with Au particles on the SnO{sub 2} surface is 4 times greater than that under interaction with Pt/Pd particles. The degree of dissociation of H{sub 2}O molecules into hydrogen atoms and hydroxyl groups in pure moist air on the surface of the sensors of the second series is 1.6 times greater than that for the sensors of the first series. Thus, gold is a more effective stimulator of the dissociation of H{sub 2} and H{sub 2}O molecules than platinum and palladium. A formula is obtained that describes more accurately the dependence of the response of the sensors of both series to the effect of hydrogen on the concentration of this gas and on the temperature of the measuring devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Precious Metal Distributions in Direct Nickel Matte Smelting with Low-Cu Mattes

Base metal (Cu, Fe, and Ni) and trace element (Ag, Au, Co, Pd, and Pt) distributions between low-iron nickel mattes with [Ni]:[Cu] = 4 (w/w) have been studied at 1623 K to 1723 K (1350 °C to 1450 °C). We equilibrated small slag–matte samples with CO–CO{sub 2}–SO{sub 2}–Ar atmospheres in pre-selected P{sub S{sub 2}}–P{sub O{sub 2}} points, maintaining silica saturation by fused silica crucibles. The slags studied contained about 0 to 8.5 wt pct MgO. The matte–slag distribution coefficients L{sup m/s}[Me] were obtained from assays by electron probe X-ray microanalysis for the matte and by laser ablation-ICP-mass spectrometry for the slag. The measured L{sup m/s}[Me] values were clearly dependent on iron concentration of the matte and on MgO concentration of the slag, with values on the order of 10{sup 4}, 10{sup 5}, and 10{sup 4} for gold, platinum, and palladium, respectively, in the 5 wt pct iron in matte experiments. The obtained data for silver were scattered, due to volatilization, resulting in depletion of most silver and its escape from matte to gas phase during the 3-hour equilibration period. The matte-to-slag distribution coefficient for silver was estimated to be L{sup m/s}[Ag] = 100 to 400. We also measured the distributions of the base metals Cu and Ni in the same conditions as the trace elements.

36 MATERIALS SCIENCE↗

Investigation of Pt and Pd Modified WO{sub 3} and ZnO Based Thin Film Sensors for Ethanol Sensing

Ethanol sensors based on different WO{sub 3} and ZnO structures are studied in the present work. The XRD and SEM processes are used to characterize the sensing layer’s surface morphology which reveals the presence of nanoparticle in sensing layer. Further reducing the nanoparticle diameter by the addition of palladium (Pd) and platinum (Pt) for both the sensors (ZnO and WO{sub 3}) gives good results on sensitivity, operating temperature, response time and recovery time. Nanoparticle diameter for undoped WO{sub 3}, Pd-modified WO{sub 3} and Pt-modified WO{sub 3} based sensors is 11.8, 6 and 5.4 nm, whereas nanoparticle diameter for undoped, Pd-modified and Pt-modified ZnO based sensors is 20, 14 and 11 nm, respectively. Analysis of dynamic response of the sensors when exposed to different concentrations of ethanol vapour (from 500 to 10,000 ppm) and various temperatures indicate the improvement in sensitivity up to 77.2% for WO{sub 3} and 74.6% for ZnO based sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Palladium/Zeolite Low Temperature Passive NOx Adsorbers (PNA): Structure-Adsorption Property Relationships for Hydrothermally Aged PNA Materials

Zeolites with different framework structures (SSZ-13, ZSM-5, BEA) but similar Si/Al ratios and Pd loading (~1 wr%) were synthesized and evaluated as low temperature passive NOx adsorbers (PNA). These materials exhibit high NOx adsorption efficiency with atomically dispersed Pd the active adsorption site. Hydrothermal aging at 750 ºC for 16 hours in the presence of 10% water vapor in air resulted in the formation of PdO nanoparticles in all three samples as evidenced by high energy XRD. Hydrothermal aging of the small-pore Pd/SSZ-13 (Si/Al = 6), which contain ~100-90% atomically dispersed palladium ions, decreases its PNA performance only by ~10-20%. High-field solid state 27Al NMR studies on the fresh and aged samples substantiate dealumination and significant changes in the distribution of Al (and thus, Bronsted acid) sites after hydrothermal aging. FTIR measurements with NO probe molecule and titration of Bronsted acid sites with nitrosyl (NO+) ions further corroborate the 27Al NMR data. Because framework aluminum atoms are the anchoring sites for atomically dispersed Pd ions, their elution from the framework causes the loss of active atomically dispersed Pd species. Furthermore, with the aid of HAADF-STEM imaging and synchrotron XRD studies, we further confirm and visualize the fate of these Pd species – they agglomerate into PdO nanoparticles on the external surface of zeolite. Consequently, these changes lead to the decrease in PNA performance of these materials after hydrothermal aging. The thus formed agglomerates cannot be re-dispersed back to their ionic state due to the loss of framework Al T-sites and/or inherent stability of such large PdO particles. Our study clearly demonstrates that, unlike in previous studies that found increased PNA performance upon HTA , high temperatures hydrothermal aging of PNA materials that contain atomically dispersed Pd initially, results in a decrease in NOx storage efficiency due mostly to the formation of PdO agglomerates. However, we also highlight the high hydrothermal stability of predominantly atomically dispersed 1-3 wt% Pd/SSZ-13 (Si/Al = 6), whose performance decreases only marginally after prolonged hydrothermal aging at 750 ºC. Overall, this study shows that hydrothermally stable passive NOx materials can be prepared using small-pore SSZ-13 zeolite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis Dependent Core Level Binding Energy Shift in the Oxidation State of Platinum Coated on Ceria–Titania and its Effect on Catalytic Decomposition of Methanol

Synergistic interaction of catalyst and support has attracted the interest of the catalytic community for several decades. The decomposition/oxidation of alcohols for the production of hydrogen as a source of fuel requires such support catalyst interaction. Recent studies have suggested the active role of oxide based supports on the catalytic ability of noble metals such as gold, platinum and palladium. Herein, we report the effect of synthesis technique on the catalytic activity of platinum coated on mixed ceria-titania support system. Wet impregnation technique followed by calcination was compared with the chemical reduction of platinum during the coating over oxide support. Methanol decomposition studied using an in-house built catalytic reactor coupled to a mass spectrometer showed that catalyst prepared by thermal reduction of platinum demonstrated better catalytic ability than the catalyst prepared by chemical reduction of platinum. Transmission electron microscopy revealed that the size of both platinum and ceria-titania particles remained unchanged, while the X-ray photoelectron spectroscopy (XPS) revealed that the oxidation state of platinum was modified by different coating procedures. A shift in the core level binding energy of the Pt 4f towards lower binding energy was observed with chemical reduction. Based on the XPS data it was found that platinum (on ceria-titania supports) in mixed oxidation state outperformed the Pt in reduced metallic state. Results from catalysis and in situ Fourier transform infra red spectroscopy are presented and discussed.

08 HYDROGEN↗