Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Temperature dependence anomalous dielectric relaxation in Co doped ZnO nanoparticles

Graphical abstract: Display Omitted Highlights: ► We prepared Co doped ZnO by facile gel-combustion method. ► Studied temperature dependent dielectric properties in detail. ► Relaxation time shifts toward the higher temperature as increase in Co content. ► SEM analysis shows formation and agglomeration of nanoparticles. ► Dielectric constants, loss and ac conductivity increases with rise in temperature. ► The dielectric constant, loss and ac conductivity decreases as Co ion increases. -- Abstract: We have reported temperature and frequency dependence of dielectric behavior of nanocrystalline Zn{sub 1−x}Co{sub x}O (x = 0.0, 0.01, 0.05 and 0.1) samples prepared by gel-combustion method. The synthesized samples were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and LCR-meter, respectively. The XRD analysis reveals that ZnO has a hexagonal (wurtzite) crystal structure. The morphology and size of the nanoparticles (∼10–25 nm) were observed by SEM for 5% Co doped ZnO sample. In dielectric properties, complex permittivity (ε{sup *} = ε′ − jε″), loss tangent (tan δ) and ac conductivity (σ{sub ac}) in the frequency range 75 kHz to 5 MHz were analyzed with temperature range 150–400 °C. The experimental results indicate that ε′, ε″, tan δ and σ{sub ac} decreases with increase in frequency and temperature. The transition temperature as obtained in dispersion curve of dielectric constant shifts toward higher temperature with increase Co content.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The formation of the complex manganites LnSr{sub 2}Mn{sub 2}O{sub 7} (Ln = La, Nd, Gd)

Graphical abstract: Display Omitted Highlights: ► Formation of the LnSr{sub 2}Mn{sub 2}O{sub 7} phases proceeds according to two different pathways. ► Cationic composition of the obtained phase depends on the formation pathway. ► Step-by-step synthesis allows obtaining single-phase material. ► Structure and magnetic properties of the single-phase NdSr{sub 2}Mn{sub 2}O{sub 7} were investigated. -- Abstract: The process of formation of the Ruddlesden–Popper phases LnSr{sub 2}Mn{sub 2}O{sub 7} (Ln = La, Nd, Gd) was investigated by means of X-ray diffraction, thermal analysis and microprobe analysis. Two parallel pathways were found for the reaction. The first one includes the formation of the intermediate K{sub 2}NiF{sub 4}-type compound by interaction of Sr{sub 7}Mn{sub 4}O{sub 15} and perovskite-type solid solution (Ln,Sr)MnO{sub 3}, while in the second one the K{sub 2}NiF{sub 4}-type intermediate is formed during the reaction of the same perovskite-type solid solution with the corresponding rare earth oxide. This result gives an explanation for the formation of two phases with slightly different cationic compositions. The kinetics of the reaction was investigated for both mechanisms resulting in determination of their relative contribution to the final composition. Pure NdSr{sub 2}Mn{sub 2}O{sub 7} was obtained using a step-by-step process according to the first mechanism, and the magnetic properties of this phase were investigated.

36 MATERIALS SCIENCE↗

Improvements in electrical and dielectric properties of substituted multiferroic LaMnO{sub 3} based nanostructures synthesized by co-precipitation method

Graphical abstract: Display Omitted Highlights: ► Simultaneous double ion substitutions philosophy is introduced in LaMnO{sub 3}. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are not reported previously. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are synthesized by co-precipitation method. ► The 12 fold increase in resistivity of LaMnO{sub 3} nanostructures is observed. -- Abstract: A series of La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles (where x, y = 0, 0.25, 0.50, 0.75 and 1.0) has been synthesized by the chemical co-precipitation method, involving double ion substitution philosophy. The nanoparticles were characterized by thermo gravimetric analysis (TGA), X-ray fluorescence spectrometry (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, vibrating sample magnetometer (VSM), DC electrical resistivity and dielectric measurements. The XRD and FTIR analysis confirmed the single orthorhombic phase and the crystallite size were found in the range of 16–34 nm. DC resistivity exhibited very interesting behavior which increased from 1.41 × 10{sup 8} to 16.35 ± 0.2 × 10{sup 8} Ω cm upon complete double ions replacement of La and Mn with Gd and Cr, respectively. This very high resistivity variation upon substitution definitely would open new avenues for applications of these materials in microwave devices and other related areas. The dielectric properties of these nanoparticles were also studied at room temperature in the range of 6 kHz to 5 MHz and the maximum dielectric behavior (ε′ = 2.86 × 10{sup 3}, tan δ = 5.41, ε″ = 15.5 × 10{sup 3}) was exhibited by La{sub 0.75}Gd{sub 0.25}Mn{sub 0.75}Cr{sub 0.25}O{sub 3} at 6 kHz. Hysteresis loops measurements showed that the synthesized nanomaterials are paramagnetic in nature at room temperature.

36 MATERIALS SCIENCE↗

Structural characterization, thermoluminescence and EPR studies of Nd{sub 2}O{sub 3}:Co{sup 2+} nanophosphors

Graphical abstract: Display Omitted Highlights: ► Nd{sub 2}O{sub 3}:Co{sup 2+} (1–4 mol%) nanophosphors have been prepared at much lower temperatures. ► Phosphors are well characterized by PXRD, SEM, TEM, FTIR, Raman, UV–vis spectroscopy. ► EPR and thermoluminescence properties were also reported. ► TL intensity increases linearly with γ dose suggesting usage in radiation dosimetry. -- Abstract: Nd{sub 2}O{sub 3}:Co{sup 2+} (1–4 mol%) nanophosphors (15–25 nm) have been prepared via low temperature solution combustion method. Scanning electron micrograph (SEM) shows that the product is highly porous in nature. The stokes line in the Raman spectrum at ∼2000 cm{sup −1} is assigned to F{sub g} mode and the anti-stokes lines are assigned to a combination of A{sub g} + E{sub g} modes. With increase of Co{sup 2+} concentration, the intensity of F{sub g} mode decreases, whereas the combination of A{sub g} + F{sub g} modes completely disappears. Electron paramagnetic resonance (EPR) spectrum exhibits two resonance signals with effective g values at g = 2.25 and g = 2.03. Thermoluminescence (TL) response of Nd{sub 2}O{sub 3}:Co{sup 2+} nanopowders with γ dose 0.23–2.05 kGy was studied. The activation energy (E) and frequency factor (s) are estimated using Chen's glow peak shape method and obtained to be in the range 0.45–1.67 eV and 1.8 × 10{sup 4} to 4.0 × 10{sup 12} s{sup −1}, respectively. It is observed that the TL glow peak intensity at 430 K increases linearly with γ dose which is suitable for radiation dosimetry.

36 MATERIALS SCIENCE↗

Synthesis and characterization of F-N-W-codoped TiO{sub 2} photocatalyst with enhanced visible light response

Graphical abstract: Display Omitted Highlights: ► Anatase F-N-W-codoped TiO{sub 2} was prepared by a sol–gel-hydrothermal method. ► Under visible illumination, carbon removal rate of RB reached 94% using F-7NW-TiO{sub 2}. ► F, N and W dopants narrowed band gap and lowed charge pairs recombination rate. ► There were W{sub x}Ti{sub 1−x}O{sub 2}, O-Ti-N and valence variation of W ions existing. -- Abstract: Anatase F-N-W-codoped TiO{sub 2} photocatalyst was successfully prepared by a method combining sol–gel with hydrothermal treatment. Effects of F, N and W ion dosage concentration on the crystallinity, morphology, grain size and chemical status of the photocatalyst were investigated. The results showed that the F-7NW-TiO{sub 2} photocatalyst composed of uniform ellipsoidal particles around 20 nm in length and 10 nm in width, and the photocatalyst displayed enhanced visible-light absorption and photocatalytic activities. Using the photocatalyst and under visible irradiation for 1.5 h, the decoloration percent of RB and carbon removal rate were about 98% and 94% respectively, which were much higher than that of commercial P25, TiO{sub 2}, N-W-TiO{sub 2} and F-TiO{sub 2}. The high visible-light photocatalytic activity of F-7NW-TiO{sub 2} might result from narrowing the band gap and lowing charge pairs recombination rate for the W{sub x}Ti{sub 1−x}O{sub 2}, O-Ti-N and valence variation of W ions existing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Gd dopant concentration on the defect engineering in ceria nanostructures

Graphical abstract: Display Omitted Highlights: ► Investigates the ionic conductivity of defect engineered Gd doped nano scale ceria. ► Reveals that there exists an optimum concentration of dopant to engineer ceria with large O{sub 2} vacancies. ► For the first time the Nanosponge morphology observed in the Gd doped nanoceria. ► It is observed that 5% of Gd in ceria is optimum to induce appropriate amount of defects. ► Thereby an enhanced ionic conductivity is achieved in 5% Gd doped ceria. -- Abstract: In this study, the fabrication and characterization of pure and gadolinium (Gd) doped ceria nanostructures (Ce{sub 1−x}Gd{sub x}O{sub 2−δ} where x = 0.05, 0.1 and 0.2) are investigated. The origin of defect formation has been systematically investigated by XRD and UV-Visible Raman. All the fabricated ceria are found to be “Nanosponge” morphology which is observed by using FESEM technique. The charge transfer of O{sup 2−} ions and Ce{sup 3+}/Ce{sup 4+} in the ceria host due to these defect structures are studied by UV–DRS. Impedance analysis is showed an enhanced ionic conductivity for 5% Gd doped ceria compared to other concentration of Gd, revealing that the dopant concentration is a critical parameter in engineering a large number of vacancy defects in ceria nanostructures.

36 MATERIALS SCIENCE↗

Preparation and characterization of one-dimensional GaN nanorods with Tb intermediate layer

Graphical abstract: Display Omitted Highlights: ► GaN nanorods have been prepared on Si substrates by magnetron sputtering. ► GaN nanorods are single crystal with hexagonal wurtzite structure. ► GaN nanorods are high-quality crystalline after ammoniating at 950 °C for 15 min. ► Ammoniating temperatures and times affect the growth of GaN nanorods significantly. -- Abstract: GaN nanorods have been successfully prepared on Si(1 1 1) substrates by magnetron sputtering through ammoniating Ga{sub 2}O{sub 3}/Tb thin films. X-ray diffraction (XRD), X-ray photoelectron spectroscope (XPS), FT-IR spectrophotometer, scanning electron microscope (SEM), high-resolution transmission electron microscope (HRTEM), and photoluminescence (PL) spectroscopy were used to characterize the microstructures, morphologies compositions and optical properties of the GaN samples. The results demonstrate that the nanorods are single crystal GaN with hexagonal wurtzite structure and high-quality crystalline after ammoniating at 950 °C for 15 min, which have the size of 100–150 nm in diameter. Ammoniating temperatures and times affect the growth of GaN nanorods significantly. The growth procedure mainly follows the Tb catalyst-assisted VLS mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile synthesis and luminescent properties of TiO{sub 2}:Eu{sup 3+} nanorods and spindle-shaped nanoparticles from titanate nanotubes precursors

Graphical abstract: This picture illustration for the formation process of TiO{sub 2}:Eu{sup 3+} nanorods and spindle-shaped nanoparticles. Display Omitted Highlights: ► TiO{sub 2}:Eu{sup 3+} nanorods and spindle-shaped nanoparticles were prepared. ► The nanotubes could transform to nanorods and spindle-shaped nanoparticles. ► The luminescence properties are dependent on the increases of the bandgap. -- Abstract: TiO{sub 2}:Eu{sup 3+} nanorods and spindle-shaped nanoparticles have been successfully prepared through simple calcination and hydrothermal process respectively using titanate as the precursors. On the basis of X-ray diffraction results, the as-obtained precursors are titanate (H{sub 2}Ti{sub 2}O{sub 5}·H{sub 2}O), while nanorods and spindle-shaped nanoparticles are pure anatase phase of TiO{sub 2}. TEM and SEM images show that the as-formed precursor could be transformed from nanotubes into nanorods and spindle-shaped nanoparticles by the calcination and hydrothermal process respectively. Under UV light excitation, both the TiO{sub 2}:Eu{sup 3+} nanorods and spindle-shaped nanoparticles exhibit the strong red emission. In addition, the luminescence intensity of TiO{sub 2}:Eu{sup 3+} nanorods is higher than that of TiO{sub 2}:Eu{sup 3+} spindle-shaped nanoparticles due to the increases of the bandgap of the TiO{sub 2} nanorods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of NiFe{sub 2}O{sub 4}–Pd magnetically recyclable catalyst for hydrogenation reaction

Graphical abstract: Display Omitted Highlights: ► Novel superparamagnetic NiFe{sub 2}O{sub 4}–Pd magnetically recyclable catalyst was fabricated through co-precipitation. ► It could be reused several times without significant loss in catalytic activity for hydrogenation reaction. ► No further modification of the NiFe{sub 2}O{sub 4}–Pd magnetically recyclable catalyst is necessary for utilization as catalyst. -- Abstract: Herein we report the fabrication and characterization magnetically recyclable catalysts of NiFe{sub 2}O{sub 4}–Pd nanocomposite as highly effective catalysts for reduction reactions in liquid phase. The reduction Pd{sup 2+} was accomplished with polyethylene glycol 400 (PEG-400) instead of sodium borohydride (NaBH{sub 4}) and NiFe{sub 2}O{sub 4} nanoparticles was prepared by sonochemically using FeCI{sub 3}·6H{sub 2}O and NiCl{sub 2}. The chemical characterization of the product was done with X-ray diffractometry, Infrared spectroscopy, transmission electron microscopy, UV–Vis spectroscopy, thermal gravimetry and inductively coupled plasma. Thus formed NiFe{sub 2}O{sub 4}–Pd MRCs showed a very high activity in reduction reactions of 4-nitro aniline and 1,3-dinitrobenzene in liquid phase. It was found out that the catalytic activity of NiFe{sub 2}O{sub 4}–Pd MRCs on the reduction of 4-nitro aniline and 1,3-dinitrobenzene in liquid phase are between 99–93% and 98–93%, respectively. Magnetic character of this system allowed recovery and multiple use without significant loss of its catalytic activity. It is found that NiFe{sub 2}O{sub 4}–Pd MRCs showed very efficient catalytic activity and multiple usability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of monodispersed ZnAl{sub 2}O{sub 4} nanoparticles and their tribology properties as lubricant additives

Graphical abstract: Display Omitted Highlights: ► The preparation of ZnAl{sub 2}O{sub 4} nanoparticles was realized by hydrothermal method. ► After surface modification, ZnAl{sub 2}O{sub 4} nanoparticles of narrow size distribution can disperse in lubricating oil stably. ► The modified ZnAl{sub 2}O{sub 4} nanoparticles as lubricating oil additives exhibit good tribology properties. -- Abstract: Monodispersed spherical zinc aluminate spinel (ZnAl{sub 2}O{sub 4}) nanoparticles were synthesized via a solvothermal method and modified by oleic acid in cyclohexanol solution. The nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and infrared spectrum (IR). The dispersion ability of nanoparticles in lubricant oil was measured with optical absorbance spectrum. The results show that the modified nanoparticles are nearly monodispersed and can stably disperse in lubricant oil. The tribological properties of the ZnAl{sub 2}O{sub 4} nanoparticles as an additive in lubricant oil were evaluated with four-ball test and thrust-ring test. For comparison, ZnO and Al{sub 2}O{sub 3} nanoparticles as additive in lubricant oil were also tested respectively. The results show that ZnAl{sub 2}O{sub 4} nanoparticles exhibit better tribology properties in terms of anti-wear and anti-friction than ZnO or Al{sub 2}O{sub 3} nanoparticles. The anti-friction and anti-wear mechanisms were discussed and the lubricating effect of ZnAl{sub 2}O{sub 4} nanoparticles can be attributed to nano-bearings effect and tribo-sintering mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combustion synthesized nanocrystalline Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C cathode for lithium-ion batteries

Graphical abstract: Nanocrystalline Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C compound has been synthesized using a novel corn assisted combustion (CAC) method, wherein the composite prepared at 850 °C is found to exhibit superior physical and electrochemical properties than the one synthesized at 800 °C (Fig. 1). Despite the charge disproportionation of V{sup 4+} and a possible solid solution behavior of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} cathode upon insertion and de-insertion of Li{sup +} ions, the structural stability of the same is appreciable, even with the extraction of third lithium at 4.6 V (Fig. 2). An appreciable specific capacity of 174 mAh g{sup −1} with an excellent columbic efficiency (99%) and better capacity retention upon high rate applications have been exhibited by Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C cathode, thus demonstrating the feasibility of CAC method in preparing the title compound to best suit with the needs of lithium battery applications. Display Omitted Highlights: ► Novel corn assisted combustion method has been used to synthesize Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C. ► Corn is a cheap and eco benign combustible fuel to facilitate CAC synthesis. ► Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C exhibits an appreciable specific capacity of 174 mAh g{sup −1} (C/10 rate). ► Currently observed columbic efficiency of 99% is better than the reported behavior. ► Suitability of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C cathode up to 10C rate is demonstrated. -- Abstract: Nanocrystalline Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C composite synthesized using a novel corn assisted combustion method at 850 °C exhibits superior physical and electrochemical properties than the one synthesized at 800 °C. Despite the charge disproportionation of V{sup 4+} and a possible solid solution behavior of Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} cathode upon insertion and extraction of Li{sup +} ions, the structural stability of the same is appreciable, even with the extraction of third lithium at 4.6 V. An appreciable specific capacity of 174 mAh g{sup −1} and better capacity retention upon high rate applications have been exhibited by Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C cathode, thus demonstrating the suitability of the same for lithium-ion battery applications.

36 MATERIALS SCIENCE↗

Mesoporous iron–manganese oxides for sulphur mustard and soman degradation

Graphical abstract: Display Omitted Highlights: ► New nanodispersive materials based on Fe and Mn oxides for degradations of warfare agents. ► The best activities for the degradation of sulphur mustard (97.9% in 64 min) and soman (97.9% in 64 min). ► One pot synthesis with friendly transformed to industrial conditions. -- Abstract: Substituted iron(III)–manganese(III, IV) oxides, ammonio-jarosite and birnessite, were prepared by a homogeneous hydrolysis of potassium permanganate and iron(III) sulphate with 2-chloroacetamide and urea, respectively. Synthesised oxides were characterised using Brunauer–Emmett–Teller (BET) surface area and Barrett–Joiner–Halenda porosity (BJH), X-ray diffraction (XRD), infrared spectroscopy (IR), Raman spectroscopy and scanning electron microscopy (SEM). The oxides were taken for an experimental evaluation of their reactivity against sulphur mustard (HD) and soman (GD). When ammonio-jarosite formation is suppressed by adding urea to the reaction mixture, the reaction products are mixtures of goethite, schwertmannite and ferrihydrite, and their degradation activity against soman considerably increases. The best activities for the degradation of sulphur mustard (97.9% in 64 min) and soman (97.9% in 64 min) were observed for FeMn{sub 7}5 with 32.6 wt.% Fe (36.8 wt.% Mn) and FeMn{sub 3}7U with 60.8 wt.% Fe (10.1 wt.% Mn) samples, respectively.

36 MATERIALS SCIENCE↗

Yttrium oxide transparent ceramics by low-temperature microwave sintering

Graphical abstract: The figure shows the SEM photos of the surfaces of the Y{sub 2}O{sub 3} transparent ceramic samples obtained by microwave sintering and vacuum sintering. It is clearly demonstrated that the grain distribution of the vacuum sintering sample is not uniform with the smallest and the largest particle size at about 2 μm and 15 μm respectively, while the grain distribution of microwave sintering sample is uniform with the average diameter at about 2–4 μm (the smallest reported so far) and with no abnormal growth-up or coarsening phenomenon. We have further found out that the smaller the grain size, the higher the mechanical and optical properties. Display Omitted Highlights: ► The microwave sintering temperature of the sample is lower compared with vacuum. ► The microwave sintering time of the sample is shorter compared with vacuum. ► The mechanical properties of the microwave sintering sample is improved greatly. ► The Y{sub 2}O{sub 3} grain of microwave sintering sample is the smallest reported so far. -- Abstract: Yttrium oxide (Y{sub 2}O{sub 3}) transparent ceramics samples have been successfully fabricated by microwave sintering processing at relatively low temperatures. In comparison with the vacuum sintering processing, Y{sub 2}O{sub 3} transparent ceramics can be obtained by microwave sintering at lower sintering temperature and shorter sintering time, and they possess higher transmittances and mechanical properties. The technologies of low-temperature microwave sintering and the relationships of the microstructures and properties of the specified samples have been investigated in detail. We have found out that the low-temperature microwave sintering technique has its obvious advantages over the conventional methods in manufacturing yttrium oxide transparent ceramics.

36 MATERIALS SCIENCE↗

Effect of Mn doping on structural and magnetic susceptibility of C-type rare earth nano oxides Er{sub 2−x}Mn{sub x}O{sub 3}

Graphical abstract: Display Omitted Highlights: ► Er{sub 2−x}Mn{sub x}·O{sub 3} (0.0 ≤ x ≤ 0.20) prepared by sol–gel method. ► The change in lattice parameter is not linear with x due to the change in crystallite size with doping. ► Anomalous concentration dependence is found in magnetic susceptibility. ► The effective magnetic moment μ{sub eff} is found to decrease with composition parameter x. ► Superexchange interactions between Er ions depending on the amount of Mn or Er in different sites. -- Abstract: The manganese doped rare earth oxides Er{sub 2−x}Mn{sub x} O{sub 3} (0.0 ≤ x ≤ 0.20) were synthesized by a sol–gel process and analyzed by X-ray diffraction using Rietveld refinement methods. A single phase solid solution is formed up to x = 0.15 while for x ≥ 0.2 a manganese oxide phase appears in the diffraction pattern. Preferential cationic distribution between the non-equivalent sites 8b and 24d of space group Ia3{sup ¯} is found for all samples but to a different extent. The octahedral volume and average bond length of Er{sub 1}-O for 8b site decrease while both octahedral volume and bond length of Er{sub 2}-O for 24d site increase. Magnetization measurements were done in the temperature range 5–300 K. The effective magnetic moment μ{sub eff} is found to decrease with composition parameter x, except for sample x = 0.05 where the magnetization is enhanced. The Curie-Weiss paramagnetic temperatures indicate antiferromagnetic interaction.

36 MATERIALS SCIENCE↗

Synthesis of netlike gold nanoparticles using ampicillin as a stabilizing reagent and its application

Graphical abstract: Electrochemical deposition of netlike gold nanoparticles (GNPs) on the surface of glassy carbon electrode and preparation of netlike GNPs in aqueous solution using ampicillin as a stabilizing reagent were proposed. The catalytic properties of netlike gold nanoparticles on the glassy carbon electrode for dopamine were demonstrated. The results indicate that the netlike gold nanoparticle modified electrode has an excellent repeatability and reproducibility. Display Omitted Highlights: ► Synthesis of netlike gold nanoparticles using ampicillin as a stabilizing reagent. ► Excellent repeatability and reproducibility of netlike gold nanoparticle modified glassy carbon electrode. ► The catalytic properties of netlike gold nanoparticle for dopamine. -- Abstract: Electrochemical deposition of netlike gold nanoparticles on the surface of glassy carbon electrode and preparation of netlike GNPs in aqueous solution using ampicillin as a stabilizing reagent were proposed. The netlike gold nanoparticles were characterized by scanning electron microscope, transmission electron microscope, infrared spectrometer, UV spectrophotometer, powder X-ray diffractometer and electrochemical analyzer. The catalysis of the netlike gold nanoparticles on the glassy carbon electrode for dopamine was demonstrated. The results indicate that the gold nanoparticle modified electrode has an excellent repeatability and reproducibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cd–cysteine precursor nanowire templated microwave-assisted transformation route to CdS nanotubes

Graphical abstract: Cadmium sulfide polycrystalline nanotubes have been successfully synthesized by microwave-assisted transformation method using Cd–cysteine precursor nanowires as the source material and template in ethylene glycol at 160 °C or ethanol at 60 °C. Display Omitted Highlights: ► Cd–cysteine precursor nanowires were successfully synthesized in alkaline solution. ► CdS nanotubes were prepared by templated microwave-assisted transformation method. ► CdS nanotubes can well duplicate the size and morphology of precursor nanowires. ► This method has the advantages of the simplicity and low cost. -- Abstract: We report the Cd–cysteine precursor nanowire templated microwave-assisted transformation route to CdS nanotubes. In this method, the Cd–cysteine precursor nanowires are synthesized using CdCl{sub 2}·2.5H{sub 2}O, L-cysteine and ethanolamine in water at room temperature. The Cd–cysteine precursor nanowires are used as the source material and template for the subsequent preparation of CdS nanotubes by a microwave-assisted transformation method using ethylene glycol or ethanol as the solvent. This method has the advantages of the simplicity and low cost, and may be extended to the synthesis of nanotubes of other compounds. The products are characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

36 MATERIALS SCIENCE↗

Roughness-based monitoring of transparency and conductivity in boron-doped ZnO thin films prepared by spray pyrolysis

Graphical abstract: Display Omitted Highlights: ► We report surface roughness dependent transparency and conductivity in ZnO films. ► The surface roughness with respected to boron doping concentrations is studied. ► Boron doped and pristine Zinc oxide thin films have showed ≥95% transmittance. ► Increased carrier concentration of 9.21 × 10{sup 21} cm{sup −3} revealed from Hall measurement. -- Abstract: Sprayed polycrystalline ZnO and boron-doped ZnO thin films composed of spherical grains of 25–32 nm in diameters are used in roughness measurement and further correlated with the transparency and the conductivity characteristics. The surface roughness is increased up to Zn{sub 0.98}B{sub 0.02}O and then declined at higher boron concentrations. The sprayed ZnO films revealed ≥95% transmittance in the visible wavelength range, 1.956 × 10{sup −4} Ω cm electrical resistivity, 46 cm{sup 2}/V s Hall mobility and 9.21 × 10{sup 21} cm{sup −3} charge carrier concentration. The X-ray photoelectron spectroscopy study has confirmed 0.15 eV binding energy change for Zn 2p{sub 3/2} when 2 at% boron content is mixed without altering electro-optical properties substantially. Finally, using soft modeling importance of these textured ZnO over non-textured films for enhancing the solar cells performance is explored.

36 MATERIALS SCIENCE↗

Nitrogen-doped graphene as transparent counter electrode for efficient dye-sensitized solar cells

Graphical abstract: Display Omitted Highlights: ► NG sheets are prepared through a hydrothermal reduction of graphite oxide. ► The transparent NG counter electrodes of DSCs are fabricated at room temperature. ► Transparent NG electrode exhibits excellent catalytic activity for the reduction of I{sub 3}{sup −}. ► The DSC with NG electrode achieves a comparable efficiency to that of the Pt-based cell. ► The efficiency of rear illumination is about 85% that of front illumination. -- Abstract: Nitrogen-doped graphene sheets are prepared through a hydrothermal reduction of graphite oxide in the presence of ammonia and applied to fabricate the transparent counter electrode of dye-sensitized solar cells. The atomic percentage of nitrogen in doped graphene sample is about 2.5%, and the nitrogen bonds display pyridine and pyrrole-like configurations. Cyclic voltammetry studies demonstrate a much higher electrocatalytic activity toward I{sup −}/I{sub 3}{sup −} redox reaction for nitrogen-doped graphene, as compared with pristine graphene. The dye-sensitized solar cell with this transparent nitrogen-doped graphene counter electrode shows conversion efficiencies of 6.12% and 5.23% corresponding to front-side and rear-side illumination, respectively. Meanwhile, the cell with a Pt counter electrode shows a conversion efficiency of 6.97% under the same experimental condition. These promising results highlight the potential application of nitrogen-doped graphene in cost-effective, transparent dye-sensitized solar cells.

36 MATERIALS SCIENCE↗