SEARCH · Engineering Papers

Results for “Mixture modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Universal adsorption at the vapor-liquid interface near the consolute point

The ellipticity of the vapor-liquid interface above mixtures of methylcyclohexane (C7H14) and perfluoromethylcyclohexane (C7F14) has been measured near the consolute point T(c) = 318.6 K. The data are consistent with a model of the interface that combines a short-ranged density-vs height profile in the vapor phase with a much longer-ranged composition-versus-height profile in the liquid. The value of the free parameter produced by fitting the model to the data is consistent with results from two other simple mixtures and a mixture of a polymer and solvent. This experiment combines precision ellipsometry of the vapor-liquid interface with in situ measurements of refractive indices of the liquid phases, and it precisely locates the consolute point.

Schmidt, James W.↗

NASA NTRS1992

Burning Of Dense Clusters Of Fuel Drops

Report presents theoretical study of evaporation, ignition, and combustion of rich and relatively dense clusters of drops of liquid fuel. Focus on interactions between heterogenous liquid/gas mixture in cluster and flame surrounding it. Theoretical model of evaporation, ignition, and combustion presented.

Bellan, Josette↗

NASA NTRS1992

Modeling the land surface boundary in climate models as a composite of independent vegetation stands

An efficient strategy for modeling the land surface boundary in general circulation models (GCMs) is presented which accounts for the effects of vegetation on surface energy fluxes and allows for an arbitrary number of vegetation types to coexist in a grid square. The GCM grid square is depicted as a 'mosaic' of vegetation 'tiles', with each tile consisting of a single vegetation type. The energy balance equation for each tile follows closely that of a single vegetation version of the simple biosphere (SiB) model of Sellers et al. (1986) but is simplified enough to be written in Penman-Monteith form. Each tile in the square is coupled independently to the GCM atmosphere, and tiles affect each other only through the atmosphere. This coupling strategy differs conceptually from that of models such as SiB that assume a homogeneous mixture of vegetation types within a GCM grid square. A quantitative comparison of the two strategies is presented.

Koster, Randal D.↗

NASA NTRS1992

Flux-split algorithms for hypersonic flows

This study reviews numerical techniques for the simulation of fluid flows spanning the range of reactive regimes, from local chemical equilibrium to full thermochemical non-equilibrium. In particular, characteristic-based algorithms are considered, of the flux-vector and the flux-difference type, which are becoming ever more popular due to their accurate rendition of physically complicated, shock-wave dominated flows. Consideration is given to the problems associated with modeling the thermo-chemical behavior of reactive mixtures of thermally perfect gases, and a few topics of current research are outlined.

Cinnella, P.↗

NASA NTRS1995

Development of a Deltoid Shoulder Muscle Model for Rhesus Monkey Spaceflight Studies

The acromiodeltoid shoulder muscle was demonstrated to be a suitable model for spaceflight studies. The muscle contains a mixture of fast and slow fibers, permitting analysis of muscle fiber type specific changes. Two biopsy sites per muscle were identified that provided samples not degraded by the biopsy procedure. Both sites contained sufficient numbers fibers for determining changes in fiber type percentages and size. There was adequate bilateral symmetry regarding fiber type composition in the left and right muscles such that a total of four times points can be compared. The ESOP cage did not cause atrophy of deltoid muscle fibers; this means that microgravity-induced atrophy should be detectable. As expected, muscle excision stimulated muscle IgM and IgG muscle autoantibody production. Nonrestrained control animals suppressed this response whereas restrained monkeys showed an abnormally pronounced response indicative a compromised immune system. The presence of ESOP cage-induced changes in the immune response may mask spaceflight-induced effects. The ESOP cage modified the dominant hand operation of the PTS. These results demonstrate the importance of high fidelity ground based controls.

Riley, Danny A.↗

NASA NTRS2014

Mercury's Seasonal Sodium Exosphere: MESSENGER Orbital Observations

The Mercury Atmospheric and Surface Composition Spectrometer (MASCS) Ultraviolet and Visible Spectrometer (UVVS) on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft now orbiting Mercury provides the first close-up look at the planet's sodium exosphere. UVVS has observed the exosphere from orbit almost daily for over 10 Mercury years. In this paper we describe and analyze a subset of these data: altitude profiles taken above the low-latitude dayside and south pole. The observations show spatial and temporal variations, but there are no obvious year-to-year variations in most of the observations. We do not see the episodic variability reported by some ground-based observers. We used these altitude profiles to make estimates of sodium density and temperature. The bulk of the exosphere, at about 1200 K, is much warmer than Mercury's surface. This value is consistent with some ground-based measurements and suggests that photon-stimulated desorption is the primary ejection process. We also observe a tenuous energetic component but do not see evidence of the predicted thermalized (or partially thermalized) sodium near Mercury's surface temperature. Overall we do not see the variable mixture of temperatures predicted by most Monte Carlo models of the exosphere.

Environment↗

NASA NTRS2014

Mercury's Seasonal Sodium Exosphere: MESSENGER Orbital Observations

The Mercury Atmospheric and Surface Composition Spectrometer (MASCS) Ultraviolet and Visible Spectrometer (UVVS) on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft now orbiting Mercury provides the first close-up look at the planet's sodium exosphere. UVVS has observed the exosphere from orbit almost daily for over 10 Mercury years. In this paper we describe and analyze a subset of these data: altitude profiles taken above the low-latitude dayside and south pole. The observations show spatial and temporal variation but there is little or no year-to-year variation; we do not see the episodic variability reported by ground-based observers. We used these altitude profiles to make estimates of sodium density and temperature. The bulk of the exosphere is about 1200 K, much warmer than Mercury's surface. This value is consistent with some ground-based measurements and suggests that photon-stimulated desorption is the primary ejection process. We also observe a tenuous energetic component but do not see evidence of the predicted thermalized (or partially thermalized) sodium near Mercury's surface temperature. Overall we do not see the variable mixture of temperatures predicted by most Monte Carlo models of the exosphere.

Exosphere↗

NASA NTRS2000

Transitional mixing in a binary species supercritical, temporal mixing layer

The turbulent mixing of fluids at high pressure is a topic of much interest as it is relavant both to the natural phenomena and to technical applications. In the realm of technical applications, liquid rocket combustion presents a particular challenge as the operating conditions are supercritical with respect to both fuel and oxidizer, making mandatory the understanding of supercritical fluid behavior for a potentially explosive mixture. In this situation, numerical simulations with validated models can contribute information that would be otherwise impossible to obtain.

supercritical↗

NASA NTRS1993

Temporal Changes in Endmember Abundances, Liquid Water and Water Vapor Over Vegetation at Jasper Ridge

In this study, a Modtran-based calibration approach was used to map liquid water and atmospheric water vapor and retrieve surface reflectance from three AVIRIS scenes acquired in 1992 over the Jasper Ridge Biological Preserve. Temporal trends in endmember fractions, liquid water and atmospheric water vapor were investigated also. The combination of spectral mixture analysis and the Modtran based atmospheric/liquid water models was used to develop a unique vegetation community description.

liquid↗

DOE OSTI2022

Experimental Steps toward a Density Law for Chlorine-Crediting Criticality Models of Aqueous Plutonium solutions

Criticality accident prevention is an essential safety consideration for all operations involving fissionable and fissile materials. Predictive criticality calculations using advanced neutron transport codes, such as Monte Carlo N-Particle Transport (MCNP), are invaluable tools for designing and implementing operational limits. While indispensable, these tools are limited by the quality and accuracy of the inputs that the user provides to define the modeled system. Parameters such as atomic composition, shape, and material density must be accurately defined to obtain a meaningful result. In the case of material property details for a plutonium model, accurate material characterization data is sometimes sparse. Thus limitations in calculation accuracy can be reduced by improving our knowledge of material properties in the targeted fissile systems. One of the biggest remaining challenges to accurately defining fissile systems is the description of aqueous fissile solutions. Even simple properties, such as density, are not well-known for fissile solutions relevant to nuclear energy and security. Described here are initial efforts undertaken to improve criticality calculation inputs for fissile plutonium chloride solutions in water. This effort is focused on experimentally determining accurate solution characteristics for ternary plutonium chloride/hydrochloric acid/water systems, by measurement of water activity and solution density. The effect of inputting experimental densities for these solutions into MCNP criticality calculations is compared to the traditional approach of modeling an idealized (and fictitious) plutonium-water mixture. Expansion of these efforts to a working density law for aqueous plutonium chloride solutions is also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1993

Dynamics of flames near the rich-flammability limit of hydrogen-air mixtures

Flames near the rich-flammability limit of hydrogen-air mixtures are studied using a detailed, time-dependent, one-dimensional Lagrangian model. Results from the numerical simulations indicate that a steady burning velocity is not obtained for very rich hydrogen-air mixtures. As the amount of hydrogen is increased, a damped oscillation is observed in the flame and burning velocities, and then, with further increase in the amount of hydrogen, an undamped oscillation with a complex set of frequencies is observed. Simulations with a simplified one-step irreversible chemical reaction do not show these oscillations, suggesting that chemical kinetics plays a strong role in inducing these oscillations. Further analysis shows that the oscillations are due to a competition for H atoms between chain branching and chain-terminating reactions. Simulations of spherically expanding flames suggest that stretch effects (due to curvature) will cause the oscillations to occur in less rich mixtures than that observed for planar flames. The implications of these oscillations on the rich-flammability limit as well as the role of chemical kinetics in creating a fundamental flammability limit is discussed.

Kailasanath, K.↗

DOE OSTI2021

Computational and Experimental Study for the Denitrification of Biomass-Derived Hydrothermal Liquefaction Oil

Hydrothermal liquefaction (HTL) is a promising method for processing wet biomass and waste feedstock to produce biofuels. During the HTL process, proteins and other biomolecules in certain feedstock get converted into nitrogenous compounds in produced biocrude, which represents a major challenge to further upgrading them into fuels. One promising approach is to separate nitrogenous compounds from the biocrude using polymeric resins. In this study, experiments were conducted to down-select sorbent and resin systems using a nitrogen-compound-containing surrogate biocrude. We model the binding interactions between an Amberlyst polymeric resin with various compounds present in the biocrude mixture such as nitrogenous compounds like pyrrole, pyridine, hexanamide, and representative co-existing compounds like phenol and dodecanoic acid. To ascertain the efficiency of various resins in the denitrogenation process, we have developed a quantitative structure–function model for the interacting components in the mixture. Our results suggest that the Amberlyst resin is a viable candidate for efficient removal of target nitrogen-containing compounds (such as pyridine) from the biocrude as a result of favorable interactions. The computational studies provide some insight into how and why the identified resin (Amberlyst) works in selective extraction of nitrogenous compound(s).

09 BIOMASS FUELS↗

NASA NTRS2002

Prebiotic Processing induced by Comet and Meteor Impact

In their study of organic synthesis from impact shocks using the laser-induced-plasma (LIP) technique, McKay and Borucki(l) found that organic synthesis preferentially occurred in a reducing gas mixture rich in methane, and not in a mixture rich in carbon dioxide. This result means chemical models based on the thermodynamical equilibrium approach do not apply to shock chemistry. In this study, we employ the technique of reacting flow, i.e., chemical kinetics in a fluid flow, to simulate the chemistry occurring in LIP and in the wake region from comet or meteor impact. Three different air compositions have been used: (1) 1/3 CO2 and 2/3 H2, (2) pure CH4, and (3) 1/4 CH4, 1/4 CO2, and 1/2 H2O. The stoichiometric ratio of gas mixtures (1) and (3) are kept the same. For (1) we obtain equal mole fractions of CO and H2O as the major products and for (2) C2H2 is the major product. In both cases our results are in agreement with Ref. (1). For (3) we find an interesting case where the nature of chemicals produced to be critically dependent on the flowfield temperature. At the higher temperature part of the wake region, CO and H2O are the dominant products, whereas in the cooler region C2H2 is the dominant product. Further studies of these reactions, as well as for the gas mixture including N2, are being pursued.

Dateo, Christopher E.↗

NASA NTRS2001

Small Signal Modeling and Control of the Hydrogen Mixer for Facility E1

We have undertaken the theoretical modelling of an existing liquid hydrogen (LH2) and gas hydrogen (GH2) mixer subsystem of the E1 Ground Test Facility at NASA John C. Stennis Space Center. The E1 test facility carries out comprehensive ground-based testing and certification of various liquid rocket engines and their components. The mixer described in this work is responsible for combining high pressure before it is fed into a test article. The desired properties are maintained by precise control of the mixture of LH2 and GH2 flows. The mixer is modelled as a general multi-flow lumped volume for single constituent fluids using density and internal energy as states. The set of nonlinear differential equations is linearized about an equilibrium point and the resulting two-state, 3-input linear model is analyzed as a possible candidate for control design.

Barbieri, Enrique↗

NASA NTRS1981

Modeling misregistration and related effects on multispectral classification

The effects of misregistration on the multispectral classification accuracy when the scene registration accuracy is relaxed from 0.3 to 0.5 pixel are investigated. Noise, class separability, spatial transient response, and field size are considered simultaneously with misregistration in their effects on accuracy. Any noise due to the scene, sensor, or to the analog/digital conversion, causes a finite fraction of the measurements to fall outside of the classification limits, even within nominally uniform fields. Misregistration causes field borders in a given band or set of bands to be closer than expected to a given pixel, causing additional pixels to be misclassified due to the mixture of materials in the pixel. Simplified first order models of the various effects are presented, and are used to estimate the performance to be expected.

Billingsley, F. C.↗

DOE OSTI2021

Modeling Phase Equilibrium of Common Sugars Glucose, Fructose, and Sucrose in Mixed Solvents

The industrial processing of sugars and sugar-containing mixtures is gaining widespread use as a form of renewable manufacturing from biomass. To aid in process modeling for design and optimization, a commonly available thermodynamic model is needed that describes the phase equilibrium of these compounds. This work compiles and compares models for solid–liquid and vapor–liquid phase equilibrium from the available data for the representative sugars glucose, fructose, and sucrose in the representative solvents water, methanol, and ethanol, including data for multisugar, multisolvent systems. Additionally, the nonrandom two-liquid (NRTL) model was chosen for these systems because of its widespread use in industry and the availability of parameters for many solvents and cosolutes. The association-NRTL (aNRTL) model was investigated as an improvement for modeling sugars, which may experience a high degree of association because of their many hydroxy groups. Both models accurately capture the data and are able to predict the behavior of multisugar systems with only solute–solvent interaction parameters. The aNRTL model shows an improvement over the baseline NRTL model that is most significant for sucrose, the component with the highest association strength, and least significant for fructose, which has the lowest association strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2023

Comparative Analysis of Empirical and Machine Learning Models for Chla Extraction Using Sentinel-2 and Landsat OLI Data: Opportunities, Limitations, and Challenges

Remote retrieval of near-surface chlorophyll-a (Chla) concentration in small inland waters is challenging due to substantial optical interferences of various water constituents and uncertainties in the atmospheric correction (AC) process. Although various algorithms have been developed to estimate Chla from moderate-resolution terrestrial missions (∼10–60 m), the production of both accurate distribution maps and time series of Chla has proven challenging, limiting the use of remote analyses for lake monitoring. Here, we develop a support vector regression (SVR) model, which uses satellite-derived remote-sensing reflectance spectra () from Sentinel-2 and Landsat-8 images as input for Chla retrieval in a representative eutrophic prairie lake, Buffalo Pound Lake (BPL), Saskatchewan, Canada. Validated against in situ Chla from seven ice-free seasons (N ∼ 200; 2014–2020), the SVR model outperformed both locally tuned, -fed empirical models (Normalized Difference Chlorophyll Index, 2- and 3-band, and OC3) and Mixture Density Networks (MDNs) by 15–65%, while exhibiting comparable performance to a locally trained MDN, with an error of ∼35%. Comparison of Chla retrieval models, AC processors (iCOR, ACOLITE), and radiometric products (Rayleigh-corrected, surface, and top-of-atmosphere reflectance) showed that the best Chla maps and optimal time series (up to 100 mg m−3) were produced using a coupled SVR-iCOR system.

algal blooms↗

NASA NTRS1992

Internal structure of shock waves in disparate mass mixtures

The detailed flow structure of a normal shock wave for a gas mixture is investigated using the direct-simulation Monte Carlo method. A variable diameter hard-sphere (VDHS) model is employed to investigate the effect of different viscosity temperature exponents (VTE) for each species in a gas mixture. Special attention is paid to the irregular behavior in the density profiles which was previously observed in a helium-xenon experiment. It is shown that the VTE can have substantial effects in the prediction of the structure of shock waves. The variable hard-sphere model of Bird shows good agreement, but with some limitations, with the experimental data if a common VTE is chosen properly for each case. The VDHS model shows better agreement with the experimental data without adjusting the VTE. The irregular behavior of the light-gas component in shock waves of disparate mass mixtures is observed not only in the density profile, but also in the parallel temperature profile. The strength of the shock wave, the type of molecular interactions, and the mole fraction of heavy species have substantial effects on the existence and structure of the irregularities.

Chung, Chan-Hong↗