SEARCH · Engineering Papers

Results for “Mirrors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Modeling pulse-cleaning plasma mirrors from dielectric response to saturation: A particle-in-cell approach

Pulse-cleaning plasma mirrors are widely employed to improve ultraintense laser contrast, but much of the literature concerning their effect on the reflected pulse is empirical. A simulation study of pulse-cleaning plasma mirrors using the particle-in-cell code large scale plasma is presented here. The importance of capturing initial ionization from neutral atoms, collisional effects, and simulation dimensionality is considered. Excellent agreement with experimental data is obtained when a multiphoton ionization model is employed. Furthermore, a series of 2D simulations is shown to accurately replicate both the reflected light intensity and mode obtained from full 3D simulations at significantly reduced computation cost.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Mirrors for petawatt lasers: Design principles, limitations, and solutions

High intensity and high energy laser facilities place increasing demands on optical components, requiring large surface area optics with exacting specifications. Petawatt lasers are high energy, short-pulse laser systems generally based on chirped-pulse amplification, where an initial low energy short pulse is stretched, amplified, and then recompressed to produce fs to ps high-power laser pulses. In such petawatt lasers, the highest demands are placed on the final optics, including gratings which compress the pulses and mirrors which direct and focus the final high-power beams. The limiting factor in these optical components is generally laser-induced damage. Designing and fabricating these optical components to meet reflection, dispersion, and other requirements while meeting laser-induced damage requirements is the primary challenge discussed in this tutorial. We will introduce the reader to the technical challenges and tradeoffs required to produce mirrors for petawatt lasers and discuss current research directions.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Reflectivity and spectrum of relativistic flying plasma mirrors

Flying plasma mirrors induced by intense lasers via laser wake field acceleration scheme have been proposed as a promising way to generate few-cycle EUV or x-ray lasers. In addition, if such a relativistic plasma mirror can accelerate, then it would serve as an analog black hole to investigate the information loss paradox associated with the black hole Hawking evaporation. Among these applications, the reflectivity, which is usually frequency-dependent, would affect the outgoing photon spectrum and, therefore, impact on the analysis of the physics under investigation. In this paper, these two issues are investigated analytically and numerically with one-dimensional particle-in-cell simulations. Based on our simulation results, we propose a new model that provides a better estimate of the reflectivity than those studied previously. Moreover, we found that the peak frequency of the reflected spectrum of a Gaussian incident wave deviates from the expected value, 4γ 2 ω, due to the dependence of reflectivity on the frequency of the incident wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Evaluation of an x-ray multilayer mirror for radiography at sub-1-keV photon energies

An x-ray multilayer mirror on a spherical substrate designed for near-normal incidence with a photon energy of ~738 eV (F He α ) was procured and tested. This device is intended to be used for in-flight radiography of the shell in inertial confinement fusion experiments with cryogenic targets on the OMEGA laser at the Laboratory for Laser Energetics. Experiments in self-emission on a small (~10 J) laser system showed that the reflectivity of the mirror is high enough to record an image at laser energies as low as 0.1 J. Furthermore, a second set of tests in backlighting geometry on a larger (kJ)-scale, short-pulse laser yielded usable radiographs with laser energies as low as 40 J with a spatial resolution of ~10 μm.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

Mechanical design of a parallel flexure-based RADSI instrument for curved x-ray mirror metrology

Modern synchrotron x-ray beamlines demand reflective optics with higher surface profile accuracy to achieve diffraction-limited focusing. This necessitates advanced metrology instruments capable of delivering repeatable measurements in the nanometer to sub-nanometer range. Slope ranges exceeding 15 mrad (0.86°) and greater pose significant challenges for mirror metrology using conventional interferometric methods. Here, to address this, we present a new relative angle determinable stitching interferometry instrument featuring a parallel flexure-based mechanical design. This approach enhances vibration and thermal stability while maintaining a compact and lightweight system. Initial measurements of a cylindrical mirror with a 16 m radius of curvature and a slope range of 5 mrad demonstrate nanometer-level repeatability. Comprehensive system characterization suggests the potential for achieving sub-nanometer repeatability with further refinement to the instrument.

36 MATERIALS SCIENCE↗

DOE OSTI2016

Nonlinear reflection of high-amplitude laser pulses from relativistic electron mirrors

A coherent X-ray pulse of attosecond duration can be formed in the reflection of a counterpropagating laser pulse from a relativistic electron mirror. The reflection of a high-amplitude laser pulse from the relativistic electron mirror located in the field of an accelerating laser pulse is investigated by means of two-dimensional (2D) numerical simulation. It is shown that provided the amplitude of the counterpropagating laser pulse is several times greater than the amplitude of the accelerating laser pulse, the reflection process is highly nonlinear, which causes a significant change in the X-ray pulse shape and its shortening up to generation of quasi-unipolar pulses and single-cycle pulses. A physical mechanism responsible for this nonlinearity of the reflection process is explained, and the parameters of the reflected X-ray pulses are determined. It is shown that the duration of these pulses may constitute 50 – 60 as, while their amplitude may be sub-relativistic. (extreme laser radiation: physics and fundamental applications)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2012

Mirror-smooth surfaces and repair of defects in superconducting RF cavities by mechanical polishing

Mechanical techniques for polishing the inside surface of niobium superconducting radio-frequency (SRF) cavities have been systematically explored. By extending known techniques to fine polishing, mirror-like finishes were produced, with <15 nm RMS (root mean square) roughness over 1 mm2 scan area. This is an order of magnitude less than the typical roughness produced by the electropolishing of niobium cavities. The extended mechanical polishing (XMP) process was applied to several SRF cavities which exhibited equator defects that caused quench at <20 MV m-1 and were not improved by further electropolishing. Cavity optical inspection equipment verified the complete removal of these defects, and minor acid processing, which dulled the mirror finish, restored performance of the defective cells to the high gradients and quality factors measured for adjacent cells when tested with other harmonics. This innate repair feature of XMP could be used to increase manufacturing yield. Excellent superconducting properties resulted after initial process optimization, with quality factor Q of 3 × 1010 and accelerating gradient of 43 MV m-1 being attained for a single-cell TESLA cavity, which are both close to practical limits. Several repaired nine-cell cavities also attained Q > 8 × 109 at 35 MV m-1, which is the specification for the International Linear Collider. Future optimization of the process and pathways for eliminating requirements for acid processing are also discussed.

43 PARTICLE ACCELERATORS↗

DOE OSTI2018

Radial electric field and ion parallel flow in the quasi-symmetric and Mirror configurations of HSX

In this paper, the radial electric field and the ion mean parallel flow are obtained in the helically symmetric experiment stellarator from toroidal flow measurements of C +6 ion at two locations on a flux surface, using the Pfirsch–Schlüter effect. Results from the standard quasi-helically symmetric magnetic configuration are compared with those from the Mirror configuration where the quasi-symmetry is deliberately degraded using auxiliary coils. For similar injected power, the quasi-symmetric configuration is observed to have significantly lower flows while the experimental observations from the Mirror geometry are in better agreement with neoclassical calculations. Finally, indications are that the radial electric field near the core of the quasi-symmetric configuration may be governed by non-neoclassical processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

TorbeamNN: machine learning-based steering of ECH mirrors on KSTAR

We have developed TorbeamNN: a machine learning surrogate model for the TORBEAM ray tracing code to predict electron cyclotron heating (ECH) and current drive locations in tokamak plasmas. TorbeamNN provides more than a 100 times speed-up compared to the highly optimized and simplified real-time implementation of TORBEAM without any reduction in accuracy compared to the offline, full fidelity TORBEAM code. The model was trained using KSTAR ECH mirror geometries and works for both O-mode and X-mode absorption. The TorbeamNN predictions have been validated both offline and real-time in experiment. TorbeamNN has been utilized to track an ECH absorption vertical position target in dynamic KSTAR plasmas as well as under varying toroidal mirror angles and with a minimal average tracking error of 0.5 cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Robust stellarator optimization via flat mirror magnetic fields

Stellarator magnetic configurations need to be optimized in order to meet all the required properties of a fusion reactor. In this work, it is shown that a flat-mirror quasi-isodynamic (QI) configuration (i.e. a QI configuration with sufficiently small radial variation of the mirror term) can achieve small radial transport of energy and good confinement of bulk and fast ions even if it is not very close to perfect omnigeneity, and for a wide range of plasma scenarios, including low $β$ and small radial electric field. This opens the door to constructing better stellarator reactors. On the one hand, they would be easier to design, as they would be robust against error fields. On the other hand, they would be easier to operate since, both during startup and steady-state operation, they would require less auxiliary power, and the heat loads on plasma-facing components caused by fast ion losses would be reduced to acceptable levels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2015

Design and Operation of A Setup with A Camera and Adjustable Mirror to Inspect the Sense-Wire Planes of the Time Projection Chamber Inside the MicroBooNE Cryostat

Detectors in particle physics, particularly when including cryogenic components, are often enclosed in vessels that do not provide any physical or visual access to the detectors themselves after installation. However, it can be desirable for experiments to visually investigate the inside of the vessel. The MicroBooNE cryostat hosts a TPC with sense-wire planes, which had to be inspected for damage such as breakage or sagging. This inspection was performed after the transportation of the vessel with the enclosed detector to its final location, but before filling with liquid argon. Our paper describes an approach to view the inside of the MicroBooNE cryostat with a setup of a camera and a mirror through one of its cryogenic service nozzles. The paper also describes the camera and mirror chosen for the operation, the illumination, and the mechanical structure of the setup. It explains how the system was operated and demonstrates its performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2021

An adaptive masking method for beam halo measurement by a digital micro mirror device

We report that in high intensity particle beams, irregularities in cathode emission, scattering effects, dark current and space charge forces can lead to a common phenomenon termed beam halo with associated emittance growth, beam loss and overall beam quality degradation. It is of fundamental interest and practical importance to precisely monitor such beam halo, which could offer valuable insights into the experimental strategy for the suppression of this undesired feature. A Digital Micro mirror Device (DMD) is a computer-controlled micro-electrical-mechanical system that contains a compact array of physically independent reflective mirrors. Using a standard DMD, we come up with an adaptive masking method for halo measurement, which demonstrates superior robustness and efficiency comparing to the conventional approaches as confirmed by simulation and experimental results. Our development includes an integrated package of hardware, software and a graphic user interface (GUI) that is robust and portable and can be applied as a beam halo diagnostic for electron guns or radiating charged particle beams in general.

43 PARTICLE ACCELERATORS↗

DOE OSTI2021

Mirror symmetry breaking and lateral stacking shifts in twisted trilayer graphene

Here, we construct a continuum model of twisted trilayer graphene using ab initio density-functional-theory calculations, and we apply it to address twisted trilayer electronic structure. Our model accounts for moiré variation in site energies, hopping between outside layers, and hopping within layers. We focus on the role of a mirror symmetry present in ABA graphene trilayers with a middle layer twist. The mirror symmetry is lost intentionally when a displacement field is applied between layers, and unintentionally when the top layer is shifted laterally relative to the bottom layer. We calculate two band-structure characteristics that are directly relevant to transport measurements, namely the Drude weight and the weak-field Hall conductivity. We relate them via the Hall density to assess the influence of the accidental lateral stacking shifts currently present in all experimental devices on electronic properties. Finally, we comment on the role of the possible importance of accidental lateral stacking shifts for superconductivity in twisted trilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2019

Precise branching ratio measurement for the superallowed β+ decay of 26 Si: Completion of a second mirror pair

As part of a continuing effort to test the unitarity of the Cabbibo-Kobayashi-Maskawa matrix, we have measured the branching ratio for the superallowed 0 + → 0 + β + -decay transition from 26 Si to be 0.7569(14), a result with 0.18% relative precision. With this result, the ft value for the transition is now established with comparable precision to the well-known superallowed transitions currently used in the determination of V ud . Furthermore, it also completes a second pair of mirror superallowed transitions, 26 Si → 26m Al and 26m Al → 26 Mg, the ratio of whose measured ft values provides a sensitive test of the method used to calculate the isospin-symmetry-breaking correction δ C needed to determine V ud . Like the previously measured ratio for the mass-38 mirror pair, the new result agrees well with the calculation based on Woods-Saxon radial wave functions and strengthens the case for rejecting the calculation that uses Hartree-Fock radial functions.

20 ≤ A ≤ 38↗

DOE OSTI2020

Isospin symmetry breaking in the mirror pair 73 Sr- 73 Br

The recent experimental observation of isospin symmetry breaking (ISB) in the ground states of the T=3/2 mirror pair 73 Sr- 73 Br is theoretically studied using large-scale shell-model calculations. The large valence space and the successful PFSDG-U effective interaction used for the nuclear part of the problem capture possible structural changes and provide a robust basis to treat the ISB effects of both electromagnetic and nonelectromagnetic origin. The calculated shifts and mirror-energy differences are consistent with the inversion of the I π =1/2 - ,5/2 - states between 73 Sr- 73 Br and suggest that the role played by the Coulomb interaction is dominant. Finally, an isospin breaking contribution of nuclear origin is estimated to be ≈25keV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Mirror nucleon removal reactions in p-shell nuclei

Nucleon removal reactions have been shown to be an effective tool for studying the single particle structure of nuclei. This work continues efforts to experimentally probe and benchmark the reaction and structure models used to calculate the removal reaction cross sections when using microscopic nuclear structure inputs. Here, three different single nucleon removal reactions were performed, from p -shell nuclei with masses A = 7, 9, and 10. The residual nuclei from the reactions were detected in coincidence with γ rays to determine partial cross sections to individual final states. The eikonal direct-reaction model is combined with overlap functions and residual nucleus densities from microscopic, variational Monte Carlo calculations to provide consistent nuclear structure input to the partial cross section calculations. Comparisons of measured and calculated cross sections, including for mirror reactions, are presented. The analysis of the partial cross sections leading to the ground states shows a similar behavior to the one observed from analyses of inclusive cross sections using shell model nuclear structure input: the theoretical description of the removal process is in better agreement with the data when removing weakly bound nucleons, than when removing well-bound ones. The two mirror reaction pairs presented here show consistent results between the respective members of the pairs. The results obtained for the population of the excited states, however, show a systematically different trend that appears connected to the structure part of the calculation. Additional cases are needed to better understand the respective roles of structure and dynamical effects in the deviations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Analog B ( M 1 ) strengths in the T z = ± 3 2 mirror nuclei Mn 47 and Ti 47

The lifetimes of the first excited 7 2 − states in the T z = ± 3 2 mirror nuclei Mn 47 and Ti 47 have been extracted utilizing the γ -ray line shape method, giving τ = 687 ( 36 ) ps and τ = 331 ( 15 ) ps respectively. Since these transitions are essentially pure M 1 transitions, these results allow for a high-precision comparison of analog M 1 strengths in mirror nuclei. The two analog B ( M 1 ) s are observed to be identical to a precision of about 10 % . The expected dependence of the transition matrix element with T z has been used to extract the separate isoscalar and isovector components of the transition strength, and the results are discussed in the context of predictions, based on the isospin formalism, regarding analog B ( M 1 ) strengths. Published by the American Physical Society 2024

39 ≤ A ≤ 58↗

DOE OSTI2024

Proton and neutron contributions to the quadrupole transition strengths in 39 Ca and 39 K studied by lifetime measurements of mirror transitions

The E2 transition matrix elements of isobaric multiplets are expected to follow a linear trend as a function of isospin projection. However, measurements of the 2 + → 0 + transitions in the A = 38 triplet of Ca, K, and Ar show a deviation from this trend with an enhanced transition strength in 38 Ca with respect to its mirror 38 Ar. We have studied analogue 11/2 – → 7/2 – E2 transitions in 39 Ca and its mirror partner 39 K to determine if this enhancement persists in neighboring Ca isotopes. Recoil-distance lifetime measurements of 39 Ca and 39 K were performed utilizing a 42 Sc secondary beam, the TRIPLEX plunger, the GRETINA array, and the S800 spectrograph. Our data provide a lifetime measurement of the (11/2 – ) state in 39 Ca as well as an improved lifetime result for the (9/2 – ) state, while the 39 K data are used to validate the present analysis. Furthermore, a comparison of the present data to shell-model calculations suggests an enhanced transition strength in 39 Ca, pointing to both proton and neutron contributions to core excitations across the Z = N = 20 shell gaps in close proximity to 40 Ca.

39 ≤ A ≤ 58↗