Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROWAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

The ethanol to acetaldehyde conversion activated by microwave radiation

The reaction of nonoxidative conversion of ethanol to acetaldehyde under conditions of thermal and microwave heating was studied on mixed ZnO—CuO—SiO{sub 2} oxide catalysts modified with additives of Nb and Ta carbides. It is suggested that microwave heating promotes the appearance of “hot” zones at points where the metal-rich nanoparticles of metal carbides intensively absorbing the microwave energy contact active sites of the mixed oxide catalyst ZnO—CuO—SiO{sub 2}. Formation of these zones increases ethanol conversion and selectivity for acetaldehyde at moderate (<300°C) temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On Development and Wear Behavior of Microwave-Processed Functionally Graded Ni-SiC Clads on SS-304 Substrate

In this study, the functionally graded Ni-SiC claddings with gradual change in SiC contents were deposited on SS-304 substrate using microwave hybrid heating technique. Experimental trials were carried out inside a multimode domestic microwave device at 2.45 GHz and 900 W. The optimal exposure time of 900 W microwave power was varied with compositional gradient, and it was from 300 to 360 s. The developed functionally graded clad (FGC) was characterized by SEM/EDS, XRD and Vicker’s micro-hardness. Microstructural analysis results revealed that the FGC of approximately 2 mm thickness was developed and was free from any type of interfacial cracks and visible porosity. The maximum micro-hardness was at the top FGC layer, and its value was 1025 ± 30 HV. Three types of single-layer claddings were also developed to compare the tribological behavior of FGC. FGC exhibited 32 and 1.2 times more wear resistance than SS-304 substrate and Ni + 30% SiC layer, respectively. In the case of FGC, wear mainly occurs due to debonding of carbide particles from the matrix, while plastic deformation and strong abrasion are responsible for material loss in the case of the SS-304 substrate.

36 MATERIALS SCIENCE↗

Experimental Investigations to Study the Effects of Microwave Treatment Strategy on Tool Performance in Turning Operation

In the present study, microwave treatment has been used to enhance the tribological properties of single-point tungsten carbide (WC) cutting tool inserts such as wear resistance and hardness. The tool hardness and cutting parameters were considered to evaluate the performance of microwave-treated WC inserts in turning operation. The optimum cutting parameters were identified using response surface method (RSM)-based desirability approach. The relationship between cutting parameters and output responses, viz. flank wear, cutting force and surface roughness, was developed using the RSM. The investigations revealed that the increase in tool hardness due to complex carbide formation results in a significant reduction in tool wear, cutting forces and improvement in the surface finish of workpiece. Further, the statistical models results were validated with the experimental results. Metallurgical properties of treated and untreated tool inserts were analyzed using scanning electron microscope, x-ray diffraction method and Vickers microhardness tests. The results highlighted the importance of microwave treatment in enhancing the machining performance in turning operation.

36 MATERIALS SCIENCE↗

Ambient pressure synthesis of ammonia using a microwave reactor

Ammonia synthesis processes that can operate at low temperatures and pressure and have ability for small-scale distributed production are of interest. Microwave assisted synthesis has shown improvements in kinetics and does not have economy of scale limitations of the Haber-Bosch process. A microwave reactor was used to produce ammonia at temperatures from 300 to 500 °C. Three catalyst systems were compared: commercial Fe catalyst, and supported Ru/Al 2 O 3 , and Fe/Al 2 O 3 catalysts. Furthermore, the ammonia production of the dispersed catalysts was significantly higher than the commercial catalyst with maximum production of 128 μmol/g/h at 300 °C. This increase in production is attributed to an optimal electron movement under the microwave field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-enhanced catalytic ammonia synthesis under moderate pressure and temperature

In this study, an alternative approach based on microwave-enhanced ammonia synthesis for Haber-Bosch process was carried out under moderate pressure of 0.1–0.65 MPa and temperature range of 280–400 °C over a stable CsRu/CeO 2 catalyst. The ammonia production rate is significantly improved under microwave conditions. At 0.65 MPa and 320 °C, maximum ammonia production rate was achieved at H 2 /N 2 ratio of 1/1. Stable performance was obtained in a 6-cycles of startup-shutdown operation for cumulative on-line time of 80 h. The work demonstrates the potential of microwave catalytic technology for the distributed ammonia synthesis using renewable power having intermittent nature of energy supply.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intuitive study on the effect of support morphology over Cs-Ru/CeO 2 catalyst for microwave-initiated ammonia synthesis

Microwave-initiated ammonia synthesis is a potential candidate to the current Haber-Bosch process that can operate from stranded renewable energy source. Our previous studies indicated Cs-Ru/CeO 2 is a promising catalyst for microwave-assisted ammonia synthesis and the morphology of CeO 2 significantly affects the catalytic performance. In this paper, CeO 2 support with distinct morphologies nanorod, nanoparticle, and microstructure, is studied comprehensively at ambient pressure and low temperature under microwave irradiation. Moreover, CeO 2 nanorods of various sizes were synthesized at different timing (24, 36, and 48 h). Nanorods synthesized at 36 h exhibited superior activity associated to high dispersion and small Ru particle size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic direct conversion of ethane to value-added chemicals under microwave irradiation

The reaction mechanism of ethane conversion over 4 % Mo-0.5 % Fe/ZSM-5 catalyst was investigated using two different reactors with different heating modes. A microwave fixed-bed reactor (MWFB) was used and its performance was compared to a conventional thermal fixed-bed reactor (CTFB). Over 80 % ethane conversion was achieved under microwave irradiation mode at 375 °C. Here, to achieve the same ethane conversion conventionally, the reaction temperature had to be elevated to 660 °C in the CTFB. The formation rates and selectivity of the products were compared under these two heating methods. The CTFB products had a higher selectivity towards aromatic compounds; whereas, the MWFB products had a higher selectivity towards ethylene; 26.5 % higher than the CTFB. Carbon analysis over spent catalysts of CTFB showed three distinct types of coke, whereas the microwave resulted in a single higher temperature coke type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale modeling of microwave-heated multiphase systems

Modeling of microwave heating of multiphase systems requires resolving the electromagnetic field from the single particle to the entire cavity. We introduce a multiscale methodology for computationally affordable simulations of microwave heating of multiphase systems consisting of one phase dispersed in a continuum phase. The methodology homogenizes the original multiphase system, by taking advantage of the large separation of length scales, to calculate the effective permittivity, effective thermal conductivity, and volumetric power absorbed in each phase. The methodology is rigorously assessed against particle-resolved detailed numerical simulations of model systems. We demonstrate a significant reduction in computational cost while retaining the accuracy of detailed simulations. Lastly, the present methodology enables high throughput exploration of novel multiphase system designs utilizing microwave heating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aromatics and phenols from catalytic pyrolysis of Douglas fir pellets in microwave with ZSM-5 as a catalyst

Microwave assisted catalytic pyrolysis was investigated to convert Douglas fir pellets to bio-oils by a ZSM-5 Zeolite catalyst. A central composite experimental design (CCD) was used to optimize the catalytic pyrolysis process. The effects of reaction time, temperature and catalyst to biomass ratio on the bio-oil, syngas, and biochar yields were determined. GC/MS analysis results showed that the bio-oil contained a series of important and useful chemical compounds. Phenols, guaiacols, and aromatic hydrocarbons were the most abundant compounds which were about 50-82 % in bio-oil depending on the pyrolysis conditions. Comparison between the bio-oils from microwave pyrolysis with and without catalyst showed that the catalyst increased the content of aromatic hydrocarbons and phenols. A reaction pathway was proposed for microwave assisted catalyst pyrolysis of Douglas fir pellets.

Microwave, Catalytic pyrolysis, douglas fir pellet↗

Microwave-assisted reconstruction of Ni,Al hydrotalcite-like compounds

The microwave-assisted reconstruction of Ni,Al hydrotalcite-like compounds (HTlcs) with Ni/Al molar ratios 2/1 and 3/1 has been studied. Mixed oxides obtained after calcination of the HTlcs are immersed in three different solutions containing carbonate, distilled water and an aqueous NH{sub 3} solution, and then heated at different temperatures for increasing periods of time under microwave radiation. The evolution of the structure during the treatment is followed by powder X-ray diffraction, FT-IR and vis-UV spectroscopies and SEM and TEM microscopies. Full recovery of the original layered structure is achieved in short periods of time for the 2/1 samples when the calcined HTlcs are rehydrated in the Na{sub 2}CO{sub 3} solution, but more drastic conditions are necessary for the 3/1 samples and the reconstruction seems not to be complete. Finally, only a partial reconstruction is observed in distilled water or NH{sub 3} aqueous solution. - Graphical abstract: The microwave-assisted reconstruction of Ni,Al HTlcs with Ni/Al molar ratios 2/1 and 3/1 has been studied. Full recovering of the original layered structure is achieved in short periods of time for the 2/1 in the Na{sub 2}CO{sub 3} solution, but more drastic conditions are necessary for the 3/1 samples and the reconstruction seems not to be completed. Only a partial reconstruction is observed in distilled water or NH{sub 3} aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-throughput and microwave investigation of rare earth phosphonatoethanesulfonates-Ln(O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}) (Ln=Ho, Er, Tm, Yb, Lu, Y)

Following the strategy of using bifunctional phosphonic acids for the synthesis of new metal phosphonates, the flexible ligand 2-phosphonoethanesulfonic acid, H{sub 2}O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}H (H{sub 3}L), was used in a high-throughput (HT) and microwave investigation of rare earth phosphonatoethanesulfonates. The HT-investigation led to six isotypic compounds Ln(O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}) with Ln=Ho (1), Er (2), Tm (3), Yb (4), Lu (5) and Y (6). The syntheses were scaled-up in glass reactor tubes in order to obtain larger amounts for a detailed characterization. Based on these results all compounds could be also synthesized by microwave-assisted heating and the influence of reaction time and stirring rate during the synthesis was established. For compound 2 the crystal structure was determined by single-crystal X-ray diffraction. The compounds contain isolated slightly distorted LnO{sub 6} octahedra that are connected by the phosphonate and sulfonate groups into a three-dimensional framework. Thermogravimetric investigations demonstrate the high thermal stability of the compounds up to 460 deg. C. - Graphical abstract: A high-throughput and microwave investigation of the System LnX{sub 3}/H{sub 2}O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}/NaOH/H{sub 2}O led to six new compounds Ln(O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}) with Ln=Ho, Er, Tm, Yb, Lu, Y.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetic characterization of La{sub 0.8}Sr{sub 0.2}MnO{sub 3} nanoparticles prepared via a facile microwave-assisted method

Nanoparticles of La{sub 0.8}Sr{sub 0.2}MnO{sub 3} (LSMO) with different particle sizes are synthesized by a very fast, inexpensive, reproducible, and environmentally friendly method: the microwave irradiation of the corresponding mixture of nitrates. The structural and magnetic properties of the samples are investigated by the X-Ray diffraction (XRD), Fourier transform infra-red (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and magnetic (DC magnetization and AC susceptibility) measurements. The XRD study coupled with the Rietveld refinement show that all samples crystallize in a rhombohedral structure with the space group of R−3C. The FT-IR spectroscopy and FE-SEM images indicate formation of the perovskite structure of LSMO. The DC magnetization measurements confirm the decrease in the particle size effects on the magnetic properties, e.g. reduction in the ferromagnetic (FM) moment and increase in the surface spin disorder. Magnetic dynamics of the samples studied by AC magnetic susceptibility shows that the magnetic behavior of the nanometer-sized samples is well-described by the Vogel-Fulcher and critical slowing down laws. Strong interaction between magnetic nanoparticles of LSMO was detected by fitting the experimental data with the mentioned models. - Graphical abstract: Temperature dependence of the magnetization M(T) was measured in the zero-field-cooling (ZFC) and field-cooling (FC) modes at the applied magnetic field of 100 Oe for the La{sub 0.8}Sr{sub 0.2}MnO{sub 3} with different size prepared via a facile microwave-assisted method. - Highlights: • Nanoparticles of La{sub 0.8}Sr{sub 0.2}MnO{sub 3} were synthesized by the microwave irradiation process. • The structural studies show that all samples crystallize in a rhombohedral structure with space group of R−3C. • The DC magnetic studies confirm tuning of the magnetic properties due to the particle size effects. • Magnetic dynamic studied by AC magnetic susceptibility indicate strong interaction between magnetic nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave sol–gel synthesis and upconversion photoluminescence properties of CaGd{sub 2}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} phosphors with incommensurately modulated structure

CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} phosphors with the doping concentrations of Er{sup 3+} and Yb{sup 3+} (x=Er{sup 3+}+Yb{sup 3+}, Er{sup 3+}=0.05, 0.1, 0.2 and Yb{sup 3+}=0.2, 0.45) have been successfully synthesized by the microwave sol–gel method. The crystal structure of CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} tungstates have been refined, and upconversion photoluminescence properties have been investigated. The synthesized particles, being formed after the heat-treatment at 900 °C for 16 h, showed a well crystallized morphology. Under the excitation at 980 nm, CaGd{sub 2}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} particles exhibited a strong 525-nm and a weak 550-nm emission bands in the green region and a very weak 655-nm emission band in the red region. The Raman spectrum of undoped CaGd{sub 2}(WO{sub 4}){sub 4} revealed about 12 narrow lines. The strongest band observed at 903 cm{sup −1} was assigned to the ν{sub 1} symmetric stretching vibration of WO{sub 4} tetrahedrons. The spectra of the samples doped with Er and Yb obtained under the 514.5 nm excitation were dominated by Er{sup 3+} luminescence preventing the recording of these samples Raman spectra. Concentration quenching of the erbium luminescence at {sup 2}H{sub 11/2}→{sup 4}I{sub 15/2} transition is weak in the range of erbium doping level x{sub Er}=0.05–0.2, while, for transition {sup 4}S{sub 3/2}→{sup 4}I{sub 15/2}, the signs of concentration quenching become pronounced at x{sub Er}=0.2. - Graphical abstract: CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} phosphors with the doping concentrations of Er{sup 3+} and Yb{sup 3+} (x=Er{sup 3+}+Yb{sup 3+}, Er{sup 3+}=0.05, 0.1, 0.2 and Yb{sup 3+}=0.2, 0.45) have been successfully synthesized by the microwave sol–gel method and the crystal structure refinement, and upconversion photoluminescence properties have been investigated. - Highlights: • CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} phosphors have been synthesized by the microwave sol–gel method. • The crystal structure of CaGd{sub 2−x}(WO{sub 4}){sub 4}:Er{sup 3+}/Yb{sup 3+} tungstates have been refined. • The upconversion photoluminescence properties have been investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave assisted synthesis of sheet-like Cu/BiVO{sub 4} and its activities of various photocatalytic conditions

The Cu/BiVO{sub 4} photocatalyst with visible-light responsivity was prepared by the microwave-assisted hydrothermal method. The phase structures, chemical composition and surface physicochemical properties were well-characterized via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance absorption (UV–vis/DRS), scanning electron microscopy (SEM), and N{sub 2} adsorption–desorption tests. Results indicate that the crystal structure of synthetic composite materials is mainly monoclinic scheelite BiVO{sub 4}, which is not changed with the increasing doping amount of Cu. In addition, the presence of Cu not only enlarges the range of the composite materials under the visible-light response, but also increases the BET value significantly. Compared to pure BiVO{sub 4}, 1% Cu/BiVO{sub 4}-160 performs the highest photocatalytic activity to degrade methylene blue under the irradiation of ultraviolet, visible and simulated sunlight. In addition, the capture experiments prove that the main active species was superoxide radicals during photocatalytic reaction. Moreover, the 1% Cu/BiVO{sub 4}-160 composite shows good photocatalytic stability after three times of recycling. - Graphical abstract: A series of BiVO{sub 4} with different amounts of Cu doping were prepared by the microwave-assisted method, moreover, which performed the high photocatalytic activities to degrade methylene blue under multi-mode. - Highlights: • A series of Cu/BiVO{sub 4} with different amounts of Cu doping were prepared by microwave-assisted synthesis. • The morphologies of as-samples were different with the amount of Cu doping increased. • Compared with pure BiVO{sub 4}, as-Cu/BiVO{sub 4} showed stronger absorption in the visible light region obviously. • 1% Cu/BiVO{sub 4}-160 performed the high photocatalytic activities to degrade methylene blue under multi-mode. • OH{sup •} and h{sup +} both play important roles in the photocatalytic reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave hybrid synthesis of silicon carbide nanopowders

Nanosized silicon carbide powders were synthesised from a mixture of silica gel and carbon through both the conventional and microwave heating methods. Reaction kinetics of SiC formation were found to exhibit notable differences for the samples heated in microwave field and furnace. In the conventional method SiC nanopowders can be synthesised after 105 min heating at 1500 deg. C in a coke-bed using an electrical tube furnace. Electron microscopy studies of these powders showed the existence of equiaxed SiC nanopowders with an average particle size of 8.2 nm. In the microwave heating process, SiC powders formed after 60 min; the powder consisted of a mixture of SiC nanopowders (with two average particle sizes of 13.6 and 58.2 nm) and particles in the shape of long strands (with an average diameter of 330 nm)

36 MATERIALS SCIENCE↗

The microwave effect on the properties of silica-coated TiO{sub 2} fine particles prepared using sol-gel method

The silica coating of TiO{sub 2} fine particle was conducted using microwave assisted sol-gel method and conventional sol-gel method to suppress its photo-catalytic activity. The amount and uniformity of silica coating on TiO{sub 2} surface were characterized by X-ray photoelectron spectroscopy (XPS), X-ray fluorescence spectroscopy (XRF), infrared spectroscopy (IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and zeta potential measurements. XPS and XRF results showed that the presence of catalyst and reaction time were important factors to reach high silica amounts. SEM, TEM, and zeta potential results indicated that dense film coating of SiO{sub 2} layer formed on TiO{sub 2} surface in conventional sol-gel method, whereas the nucleation coating was observed on sample prepared by microwave assisted sol-gel method. When photo-catalytic activities and ultraviolet (UV) shielding abilities of these samples were evaluated, the sample prepared by microwave processing showed higher inhibition of photo-catalytic activity and better UV shielding ability than the sample prepared by conventional method. These results suggested that the coating method significantly affected the photo-catalytic activity and UV shielding ability of coated TiO{sub 2}.

36 MATERIALS SCIENCE↗

Efficient rapid microwave-assisted route to synthesize InP micrometer hollow spheres

The efficiencies of two methods of synthesizing InP micro-scale hollow spheres are compared via the analogous solution-liquid-solid (ASLS) growth mechanism, either through a traditional solvothermal procedure, or via a microwave-assisted method. Scanning electronic microscopy (SEM) images show that most of the as-grown samples are micrometer hollow spheres, which indicates the efficiency of both methods. For traditional solvothermal route, long time (10 h) is necessary to obtain the desired samples, however, for the microwave-assisted route, 30 min is enough for hollow spherical products. An optimal choice of microwave irradiating time allows reducing the reaction time from hours to minutes. The proposed ASLS growth mechanism has also been discussed in detail.

36 MATERIALS SCIENCE↗

A microwave-assisted sol-gel Pechini method for the synthesis of BaCe{sub 0.65}Zr{sub 0.20}Y{sub 0.15}O{sub 3-{delta}} powders

In this work, BaCe{sub 0.65}Zr{sub 0.20}Y{sub 0.15}O{sub 3-{delta}} powders with a perovskite-type structure were successfully synthesized by a microwave-assisted sol-gel Pechini method (SGP). By comparison, powders having the same nominal stoichiometry were also prepared without the microwave assistance. For the syntheses, nitrates were used as metal precursors, and ethylenediaminetetraacetic acid and ethylene glycol were used as complexing and polymerizing agents, respectively. An extensive structural and morphological investigation by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM) has been performed. Moreover, in order to check the phase transitions, simultaneous thermogravimetric and differential thermal analyses were (TG-DTA) performed on gels. With respect to the conventional Pechini method, the microwave-assisted process guaranteed a faster, energy-saving procedure for obtaining single-phase nanopowders of high purity. Moreover, a significant increase in pellet densities was achieved owing to a higher grain coalescence.

36 MATERIALS SCIENCE↗