Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Characterization of thin films prepared by co-sputtering iron and titanium precursors and thermal oxidation under air atmosphere

Highlights: • Thin films of mixed iron and titanium oxide were prepared by Ti-Fe annealing. • Segregation and phase separation of iron and titanium oxides are observed. • Formation of iron rich (Fe{sub x}O) nanoparticles at the surface region is revealed. • Formation of thin films with high refractive index can be obtained. - Abstract: Nanocomposites of metal oxides are useful materials for operation in many energy conversion systems. In this study, such nanocomposites were prepared by oxidation of mixtures of iron and titanium precursor metallic thin films at 520 °C under air atmosphere. The metallic films with different iron percentages were obtained by radio frequency (RF) magnetron sputtering on glass and silicon substrates. The films were characterized by means of X-ray Diffraction (XRD), Raman spectroscopy, UV–Vis spectroscopy, High Resolution Scanning Transmission Electron Microscopy (HRSTEM), Ellipsometry and X-ray Photo-electron Spectroscopy (XPS). The results show that these films present mainly two nanometric phases, namely Fe{sub 2}O{sub 3} and TiO{sub 2}. A phase separation was observed; the film surface was found to be iron rich oxide or clusters of iron rich oxide (Fe{sub x}O{sub y}, x > y), whereas titanium accumulated deeply in the bulk, forming TiO{sub 2} far below the film surface. A red shift of optical absorption as well as a relatively stable high refractive index (varying between 3.1 and 3.5) over a broad band of optical frequencies was observed for the films containing higher iron initial concentrations.

36 MATERIALS SCIENCE↗

Twin symmetry texture of energetically condensed niobium thin films on sapphire substrate (a-plane Al 2 O 3 )

An energetic condensation technique, cathodic arc discharge deposition, is used to growepitaxialNiobium(Nb)thin films on a-plane sapphire (hexagonal-closed-packed Al 2 O 3 ) at moderate substrate heating temperature (<400 °C). The epitaxial Nb(110)/Al 2 O 3 (1,1,-2,0) thin films reached a maximum residual resistance ratio (RRR) value 214, despite using a reactor-grade Nbcathode source whose RRR was only 30. The measurements suggest that the film’s density of impurities and structural defects are lower when compared to Nb films produced by other techniques, such as magnetron sputtering, e-beam evaporation or molecular-beam-epitaxy. At lower substrate temperature, textured polycrystalline Nbthin films were created, and the films might have twin symmetry grains with {110} orientations in-plane. The texture was revealed by x-ray diffraction pole figures. The twin symmetry might be caused by a combination effect of the Nb/Al 2 O 3 three-dimensional epitaxial relationship (“3D-Registry” Claassen’s nomenclature) and the “Volmer-Weber” (Island) growth model. However, pole figures obtained by electron backscattering diffraction (EBSD) found no twin symmetry on the thin films’ topmost surface (~50 nm in depth). The EBSD pole figures showed only one Nb{110} crystal plane orientation. Finally, a possible mechanism is suggested to explain the differences between the bulk (XRD) and surface (EBSD) pole figures.

36 MATERIALS SCIENCE↗

Optical spectroscopy of sputtered nanometer-thick yttrium iron garnet films

Nanometer (nm)-thick yttrium iron garnet (Y{sub 3}Fe{sub 5}O{sub 12}, YIG) films present interest for spintronics. This work employs spectral ellipsometry and magneto-optic Kerr effect (MOKE) spectra to characterize nm-thick YIG films grown on single-crystal Gd{sub 3}Ga{sub 5}O{sub 12} substrates by magnetron sputtering. The thickness (t) of the films ranges between 10 nm and 40 nm. Independent on t, the polar MOKE hysteresis loops saturate in the field of about 1.8 kOe, consistent with the saturation magnetization in bulk YIG (4πM{sub s} ≈ 1.75 kG). The MOKE spectrum measured at photon energies between 1.3 eV and 4.5 eV on the 38-nm-thick film agrees with that measured on single-crystal YIG bulk materials. The MOKE spectrum of the 12-nm-thick film still preserves the structure of the bulk YIG but its amplitude at lower photon energies is modified due to the fact that the radiation penetration depth exceeds 20 nm. The t dependence of the MOKE amplitude is consistent with MOKE calculations. The results indicate that the films are stoichiometric, strain free, without Fe{sup 2+}, and preserve bulk YIG properties down to t ≈ 10 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increased ferromagnetic resonance linewidth and exchange anisotropy in NiFe/FeMn bilayers

In the past investigations, the exchange-biased bilayers show much larger ferromagnetic resonance (FMR) linewidth than that of single ferromagnetic layer films. However, the mechanism of the large linewidth remains controversial. In this paper, the FMR linewidths of NiFe/FeMn bilayers prepared by dc magnetron sputtering system are systematically studied. Besides the intrinsic damping and magnetic inhomogeneity, the extrinsic relaxation based on two-magnon scattering process should be also considered to explain the strong in-plane angular dependence of the linewidths. The fitting of the out-of-plane angular dependence of the linewidths shows that the intrinsic Gilbert damping effect plays a major role in the increased linewidth in the bilayers. The value of the g factor increases due to the effect of the exchange coupling at the NiFe/FeMn interface, resulting in an enhancement in the Gilbert damping factor G. The fitting results indicate that the line broadening of the exchange-biased films is related to the exchange anisotropy. The effects of FeMn layer thickness, growth sequence of FeMn layer, and temperature on the linewidths further approve this interpretation.

36 MATERIALS SCIENCE↗

Al capping layers for nondestructive x-ray photoelectron spectroscopy analyses of transition-metal nitride thin films

X-ray photoelectron spectroscopy (XPS) compositional analyses of materials that have been air exposed typically require ion etching in order to remove contaminated surface layers. However, the etching step can lead to changes in sample surface and near-surface compositions due to preferential elemental sputter ejection and forward recoil implantation; this is a particular problem for metal/gas compounds and alloys such as nitrides and oxides. Here, the authors use TiN as a model system and compare XPS analysis results from three sets of polycrystalline TiN/Si(001) films deposited by reactive magnetron sputtering in a separate vacuum chamber. The films are either (1) air-exposed for ≤10 min prior to insertion into the ultrahigh-vacuum (UHV) XPS system; (2) air-exposed and subject to ion etching, using different ion energies and beam incidence angles, in the XPS chamber prior to analysis; or (3) Al-capped in-situ in the deposition system prior to air-exposure and loading into the XPS instrument. The authors show that thin, 1.5–6.0 nm, Al capping layers provide effective barriers to oxidation and contamination of TiN surfaces, thus allowing nondestructive acquisition of high-resolution core-level spectra representative of clean samples, and, hence, correct bonding assignments. The Ti 2p and N 1s satellite features, which are sensitive to ion bombardment, exhibit high intensities comparable to those obtained from single-crystal TiN/MgO(001) films grown and analyzed in-situ in a UHV XPS system and there is no indication of Al/TiN interfacial reactions. XPS-determined N/Ti concentrations acquired from Al/TiN samples agree very well with Rutherford backscattering and elastic recoil analysis results while ion-etched air-exposed samples exhibit strong N loss due to preferential resputtering. The intensities and shapes of the Ti 2p and N 1s core level signals from Al/TiN/Si(001) samples do not change following long-term (up to 70 days) exposure to ambient conditions, indicating that the thin Al capping layers provide stable surface passivation without spallation.

36 MATERIALS SCIENCE↗

Defects evolution and their impacts on conductivity of indium tin oxide thin films upon thermal treatment

Indium tin oxide (ITO) thin films were deposited on silicon substrates by radio-frequency magnetron sputtering. The influence of annealing temperature on the crystallite, surface morphology, defects evolution, and electrical property of the thin films was studied. The conductivity of the ITO films was significantly enhanced by two orders of magnitude by increasing the annealing temperature up to 600 °C, which was interpreted in point view of defects evolution in ITO films as revealed by positron annihilation. It was interesting to find that positron diffusion length was amazingly comparable to crystallite size in ITO films annealed below 300 °C, indicating positrons were preferentially localized and annihilated in defects around crystallite boundaries. By further increasing the temperature, positron diffusion length was far beyond the grain size with little increment. This demonstrated that defects were effectively removed around grain boundaries. The results indicated defect structure around crystallite/grain boundaries played an important role on carrier transportation in nanocrystal ITO films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Composition, Structure, and Mechanical Properties of (Ti–Hf)N Coatings on Titanium Alloy

Variations of the composition, structure, and mechanical properties (hardness, elastic modulus) of (Ti–Hf)N coatings with increasing Hf content (Ti : Hf ratio) are reported. As test samples, VT6 titanium alloy plates covered by a magnetron-sputtered titanium hafnium nitride coating have been taken. To see how the coating characteristics depend on Hf content, samples with rated compositions (Ti{sub 0.9}Hf{sub 0.1})N, (Ti{sub 0.85}Hf{sub 0.15})N, (Ti{sub 0.8}Hf{sub 0.2})N, and (Ti{sub 0.7}Hf{sub 0.3})N have been studied. The surface and depth element distributions have been found, and the phase composition and the dependence of the titanium nitride lattice parameter on Hf content in the coating have been determined. The depth profiling of a coating’s hardness and elastic modulus has been conducted by instrumental indentation. Hardness and elastic modulus have been found to be maximal (~35 and ~500 GPa, respectively) in (Ti{sub 0.85}Hf{sub 0.15})N and (Ti{sub 0.8}Hf{sub 0.2})N coatings. In addition, the depth distribution of Hf in these coatings has turned out to be most uniform.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Thermal and Luminescence Properties of AlN:Tm Thin Films Deposited on Silicon Substrate and Optical Fiber

Thin films of AlN:Tm are deposited on a Si(111) and Si(100) substrates and optical fiber by rf magnetron sputtering method. 200–400 nm thick films are deposited at various temperatures to observe the effect of temperature on their structure and morphology. Liquid nitrogen is used to deposit films at low temperature of –196°C. An electric heater is used to grow films at 250–700°C range. The deposited films are analyzed for their structure and thermal stability using X-ray diffraction and thermogravimetric analysis. Films deposited at liquid nitrogen temperature are amorphous and those deposited at high temperature are crystalline. Average grain size, strain and interatomic distance of the crystalline films are calculated. The grain size and inter-atomic distance increase from 36.54 to 45.12 nm and from 0.2368 to 0.25 nm respectively. Photoluminescence of the films excited by 783 nm crystal laser shows an intense infrared emission from Tm{sup +3} at 802 nm as a result of {sup 3}H{sub 4} → {sup 3}H{sub 6} transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Catalyst-free growth of ZnO nanowires on ITO seed/glass by thermal evaporation method: Effects of ITO seed layer thickness

A seed/catalyst-free growth of ZnO nanowires (ZnO-NWs) on a glass substrate were successfully fabricated using thermal evaporation technique. These nanowires were grown on ITO seed layers of different thicknesses of 25 and 75 nm, which were deposited on glass substrates by radio frequency (RF) magnetron sputtering. Prior to synthesized ITO nanowires, the sputtered ITO seeds were annealed using the continuous wave (CW) CO2 laser at 450 °C in air for 15 min. The effect of seed layer thickness on the morphological, structural, and optical properties of ZnO-NWs were systematically investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and UV-Vis spectrophotometer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Laser Annealing of Thin ITO Films on Flexible Organic Substrates

Indium–tin oxide (ITO) thin films on polyethylene-terephthalate film substrates are fabricated at room temperature by reactive magnetron sputtering. The minimum of the resistivity of ITO films formed at room temperature is 4.5 × 10 -4 Ω cm. The laser annealing of ITO films from 140 to 600 nm in thickness increases their conductivity from 10 to 24% depending on the energy density to the film and irradiation dose. It is established that the laser annealing of films up to 250 nm in thickness is efficient at an energy density in the range from 12 to 35 mJ/cm 2 . Films from 390 to 600 nm in thickness should be annealed by laser radiation with an energy density of no lower than 46 mJ/cm 2 . A model problem taking into account the influence of radiative cooling and heat exchange of the film and the substrate on the variation in the film temperature over time during laser annealing is considered. A one-dimensional thermal conductivity equation for a bilayer medium is used. The maximal stresses in the ITO film under various annealing modes are calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Infrared optical properties of amorphous and nanocrystalline Ta{sub 2}O{sub 5} thin films

The optical constants of tantalum pentoxide (Ta{sub 2}O{sub 5}) are determined in a broad spectral region from the visible to the far infrared. Ta{sub 2}O{sub 5} films of various thicknesses from approximately 170 to 1600 nm are deposited using reactive magnetron sputtering on Si substrates. X-ray diffraction shows that the as-deposited films are amorphous, and annealing in air at 800 °C results in the formation of nanocrystalline Ta{sub 2}O{sub 5}. Ellipsometry is used to obtain the dispersion in the visible and near-infrared. Two Fourier-transform infrared spectrometers are used to measure the transmittance and reflectance at wavelengths from 1 to 1000 μm. The surface topography and microstructure of the samples are examined using atomic force microscopy, confocal microscopy, and scanning electron microscopy. Classical Lorentz oscillators are employed to model the absorption bands due to phonons and impurities. A simple model is introduced to account for light scattering in the annealed films, which contain micro-cracks. For the unannealed samples, an effective-medium approximation is used to take into account the adsorbed moisture in the film and a Drude free-electron term is also added to model the broad background absorption.

36 MATERIALS SCIENCE↗

Epitaxial Ni{sub 3}FeN thin films: A candidate for spintronic devices and magnetic sensors

A new type of epitaxial ferromagnetic nitride (Ni{sub 3} Fe N = permalloy nitride = 'PyN') compound films were grown on Al{sub 2}O{sub 3}(1120) substrates using reactive triode magnetron sputtering. The results of electron back-scattering diffraction and x-ray diffraction techniques indicate a high quality epitaxial crystalline structure with growth normal of (100). Magnetization measurements of epitaxial PyN films revealed several unique results. (1) A textbook square hysteresis loop that suggest existence of single magnetic domain in these films. (2) A coercive field is tunable from a few mOe up to a few Oe by changing the film thickness. (3) A magnetization that switches (rotate) over a very small field range of {delta}H{sub C} {<=} 0.05 Oe, independent of the film thickness. This small {delta}H indicates a very large resistive sensitivity ({delta}R/{delta}H) of the epitaxial PyN. (4) The epitaxial PyN thermal cycling through several cycles between '2 and 800 K' (-271 Degree-Sign C to +527 Degree-Sign C) shows much less degradation only about 2-5% compared to 40% degradation of a simple Py film. Four-probe transport measurements give an anisotropic magnetoresistance of Almost-Equal-To 6%, sufficiently higher than other known ferromagnetic materials. These interesting properties are ideal for a variety of spintronic devices and magnetic sensors.

36 MATERIALS SCIENCE↗

Magnetization reversal in CoPt(111) hard/soft bilayers

The magnetization reversal in magnetron sputtered CoPt(111) hard/soft bilayers has been studied by polarized neutron reflectometry and magnetization measurements. The stability of the hard layer is tuned by the heat-treatment conditions which are used to crystallize the chemically ordered, high anisotropy, L{sub 1}0 phase. All the samples show the same features in their first order reversal curves but the lateral domain size during the magnetization reversal of the soft layer differs. In samples with strong intergrain coupling it exceeds the coherence length of the neutron beam, resulting in spin-flip scattering. In contrast, the hard layer reversal occurs through the reorientation in small domains.

36 MATERIALS SCIENCE↗

Hillock formation in co-deposited thin films of immiscible metal alloy systems

Hillocks are protruding sections of a surface that can influence the electronic and mechanical properties of a thin film. In monolithic films, these hillocks are formed due to thermally induced stress gradients during deposition. In this study, the surface morphology of co-sputtered immiscible Cu-X (X is a body centered cubic (BCC) group V or VI metal) thin films is characterized to elucidate the conditions that lead to hillock formation. Cu-Ta and Cu-Mo-Ag films were co-deposited with physical vapor deposition (PVD) magnetron sputtering at 25, 400, 600, and 800°C. A significant number of homogeneously distributed surface hillocks were observed only in the 600 and 800°C films. High-angle annular dark field (HAADF) cross-sectional imaging revealed significant Cu agglomerations underneath the protruding features. For the Cu-Ta films, the Cu was enveloped in a Cu-Ta nanocrystalline matrix. For Cu-Mo-Ag, the Cu was surrounded by Mo-Ag concentration modulations. While thermal stress gradients arise during deposition of immiscible metal films, biaxial stress calculations and literature cases reveal that they are not solely responsible for hillock formation. The observed morphologies align with a surface diffusion kinetic model that evaluates diffusion length of adatoms during deposition as a function of deposition temperature. Finally, this indicates a phase separation driving force paired with the constituent elements’ dissimilar mobilities at elevated deposition temperatures contribute to the presence of hillocks.

36 MATERIALS SCIENCE↗

Intrinsic stress in ZrN thin films: Evaluation of grain boundary contribution from in situ wafer curvature and ex situ x-ray diffraction techniques

Low-mobility materials, like transition metal nitrides, usually undergo large residual stress when sputter-deposited as thin films. While the origin of stress development has been an active area of research for high-mobility materials, atomistic processes are less understood for low-mobility systems. In the present work, the contribution of grain boundary to intrinsic stress in reactively magnetron-sputtered ZrN films is evaluated by combining in situ wafer curvature measurements, providing information on the overall biaxial stress, and ex situ x-ray diffraction, giving information on elastic strain (and related stress) inside crystallites. The thermal stress contribution was also determined from the in situ stress evolution during cooling down, after deposition was stopped. The stress data are correlated with variations in film microstructure and growth energetics, in the 0.13-0.42 Pa working pressure range investigated, and discussed based on existing stress models. At low pressure (high energetic bombardment conditions), a large compressive stress is observed due to atomic peening, which induces defects inside crystallites but also promotes incorporation of excess atoms in the grain boundary. Above 0.3-0.4 Pa, the adatom surface mobility is reduced, leading to the build-up of tensile stress resulting from attractive forces between under-dense neighbouring column boundary and possible void formation, while crystallites can still remain under compressive stress.

36 MATERIALS SCIENCE↗

Electron/phonon coupling in group-IV transition-metal and rare-earth nitrides

Transport electron/phonon coupling parameters and Eliashberg spectral functions α{sub tr}{sup 2}F(ℏω) are determined for group-IV transition-metal (TM) nitrides TiN, ZrN, and HfN, and the rare-earth (RE) nitride CeN using an inversion procedure based upon temperature-dependent (4 < T < 300 K) resistivity measurements of high-crystalline-quality stoichiometric epitaxial films grown on MgO(001) by magnetically-unbalanced reactive magnetron sputtering. Transport electron/phonon coupling parameters λ{sub tr} vary from 1.11 for ZrN to 0.82 for HfN, 0.73 for TiN, and 0.44 for CeN. The small variation in λ{sub tr} among the TM nitrides and the weak coupling in CeN are consistent with measured superconducting transition temperatures 10.4 (ZrN), 9.18 (HfN), 5.35 (TiN), and <4 K for CeN. The Eliashberg spectral function describes the strength and energy spectrum of electron/phonon coupling in conventional superconductors. Spectral peaks in α{sup 2}F(ℏω), corresponding to regions in energy-space for which electrons couple to acoustic ℏω{sub ac} and optical ℏω{sub op} phonon modes, are centered at ℏω{sub ac} = 33 and ℏω{sub op} = 57 meV for TiN, 25 and 60 meV for ZrN, 18 and 64 meV for HfN, and 21 and 39 meV for CeN. The acoustic modes soften with increasing cation mass; optical mode energies remain approximately constant for the TM nitrides, but are significantly lower for the RE nitride due to a lower interatomic force constant. Optical/acoustic peak-intensity ratios are 1.15 ± 0.1 for all four nitrides, indicating similar electron/phonon coupling strengths α{sub tr}(ℏω) for both modes.

36 MATERIALS SCIENCE↗

Study of the recombination process at crystallite boundaries in CuIn{sub 1-x}Ga{sub x}Se{sub 2} (CIGS) films by microwave photoconductivity

The loss kinetics of photogenerated charge carriers in thin polycrystalline chalcopyrite CuIn{sub 1-x}Ga{sub x}Se{sub 2} (CIGS) films has been studied by microwave photoconductivity (at 36 GHz). The films were synthesized using the ampoule method and three variants of physical vapor deposition with subsequent selenization: magnetron sputtering, thermal deposition, and modified thermal deposition with intermetallic precursors. The photoconductivity was excited by 8-ns nitrogen laser pulses with maximum intensity of 4 Multiplication-Sign 10{sup 14} photons/cm per pulse. Measurements were performed in the temperature range 148-293 K. The photoresponse amplitude is found to depend linearly on the sizes of coherent-scattering regions in the film grains, which were calculated from X-ray diffraction data. The photoresponse decay obeys hyperbolic law. The photoresponse half-decay time increases with a decrease in both temperature and light intensity. It is shown that the recombination of free holes with trapped electrons is very efficient near the crystallite boundaries.

36 MATERIALS SCIENCE↗

Growth temperature-dependent metal–insulator transition of vanadium dioxide epitaxial films on perovskite strontium titanate (111) single crystals

Vanadium dioxide (VO{sub 2}) epitaxial films were grown on perovskite single-crystal strontium titanate (SrTiO{sub 3}) substrates by reactive radio-frequency magnetron sputtering. The growth temperature-dependent metal–insulator transition (MIT) behavior of the VO{sub 2} epitaxial films was then investigated. We found that the order of magnitude of resistance change across the MIT increased from 10{sup 2} to 10{sup 4} with increasing growth temperature. In contrast, the temperature of the MIT does not strongly depend on the growth temperature and is fairly stable at about 345 K. On one hand, the increasing magnitude of the MIT is attributed to the better crystallinity and thus larger grain size in the (010)-VO{sub 2}/(111)-SrTiO{sub 3} epitaxial films at elevated temperature. On the other hand, the strain states do not change in the VO{sub 2} films deposited at various temperatures, resulting in stable V-V chains and V-O bonds in the VO{sub 2} epitaxial films. The accompanied orbital occupancy near the Fermi level is also constant and thus the MIT temperatures of VO{sub 2} films deposited at various temperatures are nearly the same. This work demonstrates that high-quality VO{sub 2} can be grown on perovskite substrates, showing potential for integration into oxide heterostructures and superlattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗