Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Comparison of two U.S. power-plant carbon dioxide emissions data sets

Estimates of fossil-fuel CO{sub 2} emissions are needed to address a variety of climate-change mitigation concerns over a broad range of spatial and temporal scales. We compared two data sets that report power-plant CO{sub 2} emissions in the conterminous U.S. for 2004, the most recent year reported in both data sets. The data sets were obtained from the Department of Energy's Energy Information Administration (EIA) and the Environmental Protection Agency's eGRID database. Conterminous U.S. total emissions computed from the data sets differed by 3.5% for total plant emissions (electricity plus useful thermal output) and 2.3% for electricity generation only. These differences are well within previous estimates of uncertainty in annual U.S. fossil-fuel emissions. However, the corresponding average absolute differences between estimates of emissions from individual power plants were much larger, 16.9% and 25.3%, respectively. By statistical analysis, we identified several potential sources of differences between EIA and eGRID estimates for individual plants. Estimates that are based partly or entirely on monitoring of stack gases (reported by eGRID only) differed significantly from estimates based on fuel consumption (as reported by EIA). Differences in accounting methods appear to explain differences in estimates for emissions from electricity generation from combined heat and power plants, and for total and electricity generation emissions from plants that burn nonconventional fuels (e.g., biomass). Our analysis suggests the need for care in utilizing emissions data from individual power plants, and the need for transparency in documenting the accounting and monitoring methods used to estimate emissions. 19 refs., 2 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Atmospheric transport and outflow of polycyclic aromatic hydrocarbons from China

A potential receptor influence function (PRIF) model, based on air mass forward trajectory calculations, was applied to simulate the atmospheric transport and outflow of polycyclic aromatic hydrocarbons (PAHs) emitted from China. With a 10 day atmospheric transport time, most neighboring countries and regions, as well as remote regions, were influenced by PAH emissions from China. Of the total annual PAH emission of 114 Gg, 92.7% remained within the boundary of mainland China. The geographic distribution of PRIFs within China was similar to the geographic distribution of the source regions, with high values in the North China Plain, Sichuan Basin, Shanxi, and Guizhou province. The Tarim basin and Sichuan basin had unfavorable meteorological conditions for PAH outflow. Of the PAH outflow from China (8092 tons or 7.1% of the total annual PAH emission), approximately 69.9% (5655 tons) reached no further than the offshore environment of mainland China and the South China Sea. Approximate 227, 71, 746, and 131 tons PAHs reached North Korea, South Korea, Russia-Mongolia region, and Japan, respectively, 2-4 days after the emission. Only 1.4 tons PAHs reached North America after more than 9 days. Interannual variation in the eastward PAH outflow was positively correlated to cold episodes of El Nino/Southern Oscillation. However, trans-Pacific atmospheric transport of PAHs from China was correlated to Pacific North America index (PNA) which is associated with the strength and position of westerly winds. 38 refs., 4 figs.

01 COAL, LIGNITE, AND PEAT↗

Process for capturing CO{sub 2} arising from the calcination of the CaCO{sub 3} used in cement manufacture

This paper outlines a new CaCO{sub 3} calcination method for producing a stream of CO{sub 2} (suitable for permanent geological storage after purification and compression). The process is based on the use of very hot CaO particles (T {gt} 1000{sup o}C) to transfer heat from a circulating fluidized bed combustor (CFBC) to a calciner (fluidized with CO{sub 2} and/or steam). Since the fluidized bed combustor and calciner have separate atmospheres, the CO{sub 2} resulting from the decomposition of CaCO{sub 3} can be captured, while the CO{sub 2} generated in the combustion of the fuel in air is emitted to the atmosphere. We demonstrate that with this system it is possible to reduce the CO{sub 2} emissions of a cement plant by around 60%. Furthermore, since the key pieces of equipment are similar to the commercial CFBCs used in power generation plants, it is possible to establish the additional investment required for the system and to estimate the cost per ton of CO{sub 2} avoided for this process to be about 19 $/tCO{sub 2} avoided. 19 refs., 4 figs.

01 COAL, LIGNITE, AND PEAT↗

Methane emissions abatement by multi-ion-exchanged zeolite A prepared from both commercial-grade zeolite and coal fly ash

The performance of multimetal-(Cu, Cr, Zn, Ni, and Co)-ion-exchanged zeolite A prepared from both a commercial-grade sample and one produced from coal fly ash in methane emissions abatement was evaluated in this study. The ion-exchange process was used to load the metal ions in zeolite A samples. The methane conversion efficiency by the samples was studied under various parameters including the amount of metal loading (7.3-19.4 wt%), reaction temperature (25-500{sup o}C), space velocity (8400-41 900 h{sup -1}), and methane concentration (0.5-3.2 vol %). At 500{sup o}C, the original commercial-grade zeolite A catalyzed 3% of the methane only, whereas the addition of different percentages of metals in the sample enhanced the methane conversion efficiency by 40-85%. Greater methane conversion was observed by increasing the percentage of metals added to the zeolite even though the BET surface area of the zeolite consequently decreased. Higher percentage methane conversion over the multi-ion-exchanged samples was observed at lower space velocities indicating the importance of the mass diffusion of reactants and products in the zeolite. Compared to the multi-ion-exchanged zeolite A prepared from the commercial-grade zeolite, the one produced from coal fly ash demonstrated similar performances in methane emissions abatement, showing the potential use of this low cost recycled material in gaseous pollutant treatment. 25 refs., 3 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Novel process for simultaneous removal of NOx and SO{sub 2} from simulated flue gas by using a sustainable Ag(I)/Ag(II) redox mediator

The objective of this work is to develop a sustainable process for simultaneous removal of waste gases such as NO, NO{sub 2}, and SO{sub 2} by an electrochemically generated Ag(I)/Ag(II) redox mediator system. High removal efficiency was achieved for NO and SO{sub 2} by the wet scrubbing method at room temperature and atmospheric pressure. This removal is achieved through oxidation and absorption by contacting the gaseous stream with redox mediator ions that offer specific or selective solubility for the solute gases to be recovered in a wet scrubber. The process parameters such as gas velocity, liquid velocity, Ag(I) concentration, and HNO{sub 3} concentration were investigated to explore the possibility of complete removal of waste gases. The Ag(I)/Ag(II)-based mediated electrochemical oxidation process proved to be quite effective for simultaneous removal of NO, NOx, and SO{sub 2} from the simulated flue gas mixtures containing NO and SO{sub 2} over a wide concentration range of 100-400 ppm. Studies were carried out with individual gas components for the mixture, and the effect of input NO and input SO{sub 2} concentrations on the NOx and SO{sub 2} removal efficiencies at 20{sup o}C was examined. Complete oxidation of NO to NO{sub 2} with 100% NO removal efficiency and 92% NOx removal efficiency was achieved along with 100% SO{sub 2} removal efficiency, highlighting a potentially far greater efficiency of the Ag(I)/Ag(II)-based system in functionality and selectivity. Active research work in this direction is anticipated in the near future. 34 refs., 8 figs.

01 COAL, LIGNITE, AND PEAT↗

Association of the sites of heavy metals with nanoscale carbon in a Kentucky electrostatic precipitator fly ash

A combination of high-resolution transmission electron microscopy, scanning transmission electron microscopy, and electron energy-loss spectroscopy (HRTEM-STEM-EELS) was used to study fly ashes produced from the combustion of an eastern Kentucky coal at a southeastern-Kentucky wall-fired pulverized coal utility boiler retrofitted for low-NOx combustion. Fly ash was collected from individual hoppers in each row of the electrostatic precipitators (ESP) pollution-control system, with multiple hoppers sampled within each of the three rows. Temperatures within the ESP array range from about 200 {degree}C at the entry to the first row to <150{degree}C at the exit of the third row. HRTEM-STEM-EELS study demonstrated the presence of nanoscale (10 s nm) C agglomerates with typical soot-like appearance and others with graphitic fullerene-like nanocarbon structures. The minute carbon agglomerates are typically juxtaposed and intergrown with slightly larger aluminosilicate spheres and often form an ultrathin halo or deposit on the fly ash particles. The STEM-EELS analyses revealed that the nanocarbon agglomerates host even finer (<3 nm) metal and metal oxide particles. Elemental analysis indicated an association of Hg with the nanocarbon. Arsenic, Se, Pb, Co, and traces of Ti and Ba are often associated with Fe-rich particles within the nanocarbon deposits. 57 refs., 5 figs.

01 COAL, LIGNITE, AND PEAT↗

Spatial and temporal variation of freely dissolved polycyclic aromatic hydrocarbons in an urban river undergoing Superfund remediation

Urban rivers with a history of industrial use can exhibit spatial and temporal variations in contaminant concentrations that may significantly affect risk evaluations and even the assessment of remediation efforts. Concentrations of 15 biologically available priority pollutant polycyclic aromatic hydrocarbons (PAHs) were measured over five years along 18.5 miles of the lower Willamette River using passive sampling devices and HPLC. The study area includes the Portland Harbor Superfund megasite with several PAH sources including remediation operations for coal tar at RM 6.3 west and an additional Superfund site, McCormick and Baxter, at RM 7 east consisting largely of creosote contamination. Study results show that organoclay capping at the McCormick and Baxter Superfund Site reduced PAHs from a precap average of 440 {+-} 422 ng/L to 8 {+-} 3 ng/L postcapping. Results also reveal that dredging of submerged coal tar nearly tripled nearby freely dissolved PAH concentrations. For apportioning sources, fluoranthene/pyrene and phenanthrene/anthracene diagnostic ratios from passive sampling devices were established for creosote and coal tar contamination and compared to published sediment values. 29 refs., 3 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Application of solid ash based catalysts in heterogeneous catalysis

Solid wastes, fly ash, and bottom ash are generated from coal and biomass combustion. Fly ash is mainly composed of various metal oxides and possesses higher thermal stability. Utilization of fly ash for other industrial applications provides a cost-effective and environmentally friendly way of recycling this solid waste, significantly reducing its environmental effects. On the one hand, due to the higher stability of its major component, aluminosilicates, fly ash could be employed as catalyst support by impregnation of other active components for various reactions. On the other hand, other chemical compounds in fly ash such as Fe{sub 2}O{sub 3} could also provide an active component making fly ash a catalyst for some reactions. In this paper, physicochemical properties of fly ash and its applications for heterogeneous catalysis as a catalyst support or catalyst in a variety of catalytic reactions were reviewed. Fly-ash-supported catalysts have shown good catalytic activities for H{sub 2} production, deSOx, deNOx, hydrocarbon oxidation, and hydrocracking, which are comparable to commercially used catalysts. As a catalyst itself, fly ash can also be effective for gas-phase oxidation of volatile organic compounds, aqueous-phase oxidation of organics, solid plastic pyrolysis, and solvent-free organic synthesis. 107 refs., 4 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Fuel-mercury combustion emissions: an important heterogeneous mechanism and an overall review of its implications

An extensive examination of combustion gases containing trace amounts of mercury shows unambiguously mercury's propensity for heterogeneous chemistry. Although additional mechanisms for the oxidation chemistry of mercury have been implied by the continuing inadequacy of modeling attempts, details of the specific chemistry have remained unknown. Now it is shown that mercury can efficiently chemi-deposit onto surfaces encountered in practical combustors. If sulfur is present, condensed mercuric sulfate forms momentarily. This is then converted by gaseous HCl to HgCl{sub 2} that may sublime into the flow or be retained. This elusive and efficient noncatalytic mechanism most likely explains the observed fractional conversions to the dichloride observed in coal combustors. A receptive surface acts solely as an intermediary, facilitating the conversion while disguising its role. Without sulfur, a corresponding mechanism occurs but via HgO that is similarly converted to the dihalide. Such heterogeneous dynamics have significant repercussions for both full-scale combustors and bench-type experiments, which data have been reassessed and reviewed. Conclusions imply that observations concerning mercury will be system dependent and no two combustors can be exactly alike. This fundamental understanding now lays a foundation for meaningful interpretations and program planning. It has indicated also the extreme care needed in sampling and monitoring the speciation of mercury in such combustion flows for reliable results. It now points to a simple low-cost surface-induced mitigation method for effectively converting the mercury in flue gases to the water-soluble dichloride. It is in essence no more than an optimization of the natural process that is currently occurring in combustors but to only limited degrees. 185 refs., 7 figs.

01 COAL, LIGNITE, AND PEAT↗

Modeling the heat and mass transfers in temperature-swing adsorption of volatile organic compounds onto activated carbons

A theoretical model was built to simulate the adsorption of volatile organic compounds (VOCs) onto activated carbons in a fixed bed. This model was validated on a set of experimental data obtained for the adsorption of acetone, ethyl formate, and dichloromethane onto five commercial activated carbons. The influence of operating conditions was modeled with various VOC contents at the inlet of the adsorber and superficial velocities of the gas-phase from 0.14 to 0.28 m.s{sup -1}. Breakthrough times and maximum temperature rises were computed with a coefficient of determination of 0.988 and 0.901, respectively. The simulation was then extended to the adsorption of mixtures of VOCs. From the comparison of simulation and experimental results, the advantage of accounting for dispersions of heat and mass is shown and the importance in taking into account the temperature effect on the equilibrium data is demonstrated. 29 refs., 6 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Mercury capture within coal-fired power plant electrostatic precipitators: model evaluation

Efforts to reduce anthropogenic mercury emissions worldwide have recently focused on a variety of sources, including mercury emitted during coal combustion. Toward that end, much research has been ongoing seeking to develop new processes for reducing coal combustion mercury emissions. Among air pollution control processes that can be applied to coal-fired boilers, electrostatic precipitators (ESPs) are by far the most common, both on a global scale and among the principal countries of India, China, and the U.S. that burn coal for electric power generation. A previously reported theoretical model of in-flight mercury capture within ESPs is herein evaluated against data from a number of full-scale tests of activated carbon injection for mercury emissions control. By using the established particle size distribution of the activated carbon and actual or estimated values of its equilibrium mercury adsorption capacity, the incremental reduction in mercury concentration across each ESP can be predicted and compared to experimental results. Because the model does not incorporate kinetics associated with gas-phase mercury transformation or surface adsorption, the model predictions represent the mass-transfer-limited performance. Comparing field data to model results reveals many facilities performing at or near the predicted mass-transfer-limited maximum, particularly at low rates of sorbent injection. Where agreement is poor between field data and model predictions, additional chemical or physical phenomena may be responsible for reducing mercury removal efficiencies. 26 refs., 5 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

A new concept of desulfurization: the electrochemically driven and green conversion of SO{sub 2} to NaHSO{sub 4} in aqueous solution

A new concept of desulfurization was developed by designing a series of electrochemical reactions to drive an SO{sub 2} absorption-and-conversion process in aqueous solution, hence the SO{sub 2} in gas was eventually converted to a valuable chemical of NaHSO{sub 4}. A model experiment of chemically substantiating this concept includes two steps: (I) absorption of SO{sub 2} gas by aqueous solution and oxidation of the absorbed SO{sub 2} to SO{sub 4}{sup 2-} by air and (II) transformation of the SO{sub 4}{sup 2-} to NaHSO{sub 4}. The experiment demonstrated that in Step I, the cathodic reduction of O{sub 2} from ambient air scavenged the H{sup +} released due to the SO{sub 2} absorption and its further oxidation, which thereby were accelerated. Meanwhile H{sub 2}O{sub 2} as a cathodic product further enhanced the SO{sub 2} oxidation. In Step II, the anodic oxidation of H{sub 2}O supplied H{sup +} and allowed the NaHSO{sub 4} formation through balances of electrons and mass. Thereafter, a pH range of 5.0-6.0 for the SO{sub 2} oxidation was optimized, and an electrochemically driven process for the SO{sub 2} conversion to NaHSO{sub 4} was proposed. Sustainability evaluation indicated that this concept complies with the principles of green chemistry and potentially enables the SO{sub 2} conversion from flue gas to NaHSO{sub 4} as a value-added process. 29 refs., 5 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Concentrations, profiles, and estimated human exposures for polychlorinated dibenzo-p-dioxins and dibenzofurans from electronic waste recycling facilities and a chemical industrial complex in Eastern China

Electronic shredder waste and dust from e-waste facilities, and leaves and surface soil collected in the vicinity of a large scale e-waste recycling facility in Taizhou, Eastern China, were analyzed for total dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) including 2,3,7,8-substituted congeners. We also determined PCDD/Fs in surface agricultural soils from several provinces in China for comparison with soils from e-waste facilities. Concentrations of total PCDD/Fs were high in all of the matrices analyzed and ranged from 30.9 to 11,400 pg/g for shredder waste, 3460 to 9820 pg/g dry weight for leaves, 2560 to 148,000 pg/g dry weight for workshop-floor dust, and 854 to 10200 pg/g dry weight for soils. We also analyzed surface soils from a chemical industrial complex (a coke-oven plant, a coal-fired power plant, and a chlor-alkali plant) in Shanghai. Concentrations of total PCDD/Fs in surface soil from the chemical industrial complex were lower than the concentrations found in soils from e-waste recycling plants, but higher than the concentrations found in agricultural soils. Agricultural soils from six cities in China contained low levels of total PCDD/Fs. Profiles of dioxin toxic equivalents (TEQs) of 2,3,7,8-PCDD/Fs in soils from e-waste facilities in Taizhou differed from the profiles found in agricultural soils. The estimated daily intakes of TEQs of PCDD/Fs via soil/dust ingestion and dermal exposure were 2 orders of magnitude higher in people at e-waste recycling facilities than in people at the chemical industrial site, implying greater health risk for humans from dioxin exposures at e-waste recycling facilities. The calculated TEQ exposures for e-waste workers from dust and soil ingestion alone were 2-3 orders of magnitude greater than the exposures from soils in reference locations. 37 refs., 1 fig., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

A systematic investigation into the extraction of aluminum from coal spoil through kaolinite

This research has applied kaolin and active carbon (AC) to the investigation of the recovery of aluminium from coal spoil (CS). The kaolin, AC-containing kaolin mixture, and CS have been calcined at 500, 600, 700, 800, and 900{degree}C for 15, 30, 60, and 120 min. The transformation of kaolinite and aluminium extraction that occurred in each calcined sample have been characterized using XRD, TG, IR, and hydrochloric acid leaching methods. The dehydroxylation of kaolinite and the decomposition of metakaolin were influenced by thermal treatment temperature and time. The metakaolin had kept a portion of OH- in its structure until it was calcined at a temperature of 800{degree}C. Under 60 min treatment, new SiO{sub 2} phase was able to be formed at 500{degree}C, kaolinite was totally converted to metakaolin at 600{degree}C, and the SiO{sub 2} rejoined the reaction at 800{degree}C. The decompositions of CS were similar to those of kaolin mixture containing 20 wt % AC (MKC). The combustion of combustible matter accelerated the decomposition of kaolinite in the CS and MKC. Higher AC content led to lower aluminum extraction. The treatment at 600{degree}C was optimal for both CS and MKC. 28 refs., 7 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Stable lead isotope compositions in selected coals from around the world and implications for present day aerosol source tracing

The phasing out of leaded gasoline in many countries around the world at the end of the last millennium has resulted in a complex mixture of lead sources in the atmosphere. Recent studies suggest that coal combustion has become an important source of Pb in aerosols in urban and remote areas. Lead concentration and isotopic composition is reported for 59 coal samples representing major coal deposits worldwide in an attempt to characterize this potential source. The average concentration in these coals is 35 {mu}g Pb g{sup -1}, with the highest values in coals from Spain and Peru and the lowest in coals from Australia and North America. The {sup 206}Pb/{sup 207}Pb isotope ratios range between 1.15 and 1.24, with less radiogenic Pb in coals from Europe and Asia compared to South and North America. Comparing the Pb isotopic signatures of coals from this and previous studies with those published for Northern and Southern Hemisphere aerosols, we hypothesize that coal combustion might now be an important Pb source in China, the eastern U.S., and to some extent, in Europe but not as yet in other regions including South Africa, South America, and western U.S. This supports the notion that 'old Pb pollution' from leaded gasoline reemitted into the atmosphere or long-range transport (i.e., from China to the western U.S.) is important. Comparing the isotope ratios of the coals, the age of the deposits, and Pb isotope evolution models for the major geochemical reservoirs suggests that the lead isotope ratios (PbIC) in coals is strongly influenced by the depositional coal forming environment. 47 refs., 3 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Adsorption of selected pharmaceuticals and an endocrine disrupting compound by granular activated carbon. 1. Adsorption capacity and kinetics

The adsorption of two representative PhACs (naproxen and carbamazepine) and one EDC (nonylphenol) were evaluated on two granular activated carbons (GAC) namely coal-based Calgon Filtrasorb 400 and coconut shell-based PICA CTIF TE. The primary objective was to investigate preloading effects by natural organic matter (NOM) on adsorption capacity and kinetics under conditions and concentrations (i.e., ng/L) relevant for drinking water treatment. Isotherms demonstrated that all compounds were significantly negatively impacted by NOM fouling. Adsorption capacity reduction was most severe for the acidic naproxen, followed by the neutral carbamazepine and then the more hydrophobic nonylphenol. The GAC with the wider pore size distribution had considerably greater NOM loading, resulting in lower adsorption capacity. Different patterns for the change in Freundlich KF and 1/n with time revealed different competitive mechanisms for the different compounds. Mass transport coefficients determined by short fixed-bed (SFB) tests with virgin and preloaded GAC demonstrated that film diffusion primarily controls mass transfer on virgin and preloaded carbon. Naproxen suffered the greatest deteriorative effect on kinetic parameters due to preloading, followed by carbamazepine, and then nonylphenol. A type of surface NOM/biofilm, which appeared to add an additional mass transfer resistance layer and thus reduce film diffusion, was observed. In addition, electrostatic interactions between NOM/biofilm and the investigated compounds are proposed to contribute to the reduction of film diffusion. A companion paper building on this work describes treatability studies in pilot-scale GAC adsorbers and the effectiveness of a selected fixed-bed model. 32 refs., 3 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

PAHs underfoot: contaminated dust from coal-tar sealcoated pavement is widespread in the United States

We reported in 2005 that runoff from parking lots treated with coal-tar-based sealcoat was a major source of polycyclic aromatic hydrocarbons (PAHs) to streams in Austin, Texas. Here we present new data from nine U.S. cities that show nationwide patterns in concentrations of {Sigma}PAHs associated with sealcoat. Dust was swept from parking lots in six cities in the central and eastern U.S., where coal-tar-based sealcoat dominates use, and three cities in the western U.S., where asphalt-based sealcoat dominates use. For six central and eastern cities, median SPAH concentrations in dust from sealcoated and unsealcoated pavement are 2200 and 27 mg/kg, respectively. For three western cities, median SPAH concentrations in dust from sealcoated and unsealcoated pavement are similar and very low (2.1 and 0.8 mg/kg, respectively). Lakes in the central and eastern cities where pavement was sampled have bottom sediments with higher PAH concentrations than do those in the western cities relative to degree of urbanization. Bottom-sediment PAH assemblages are similar to those of sealcoated pavement dust regionally, implicating coal-tar-based sealcoat as a PAH source to the central and eastern lakes. Concentrations of benzo(a)pyrene in dust from coal-tar sealcoated pavement and adjacent soils greatly exceed generic soil screening levels, suggesting that research on human-health risk is warranted. 30 refs., 4 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Effects of temperature and acidic pre-treatment on Fenton-driven oxidation of MTBE-spent granular activated carbon

The effects of temperature and acidic pretreatment on Fenton-driven chemical oxidation of methyl tert-butyl ether (MTBE)-spent granular activated carbon (GAC, derived from bituminous coal) were investigated. Limiting factors in MTBE removal in GAC include the heterogeneous distribution of amended Fe, and slow intraparticle diffusive transport of MTBE and hydrogen peroxide (H{sub 2}O{sub 2}) into the 'reactive zone'. Acid pretreatment of GAC before Fe amendment altered the surface chemistry of the GAC, lowered the pH point of zero charge, and resulted in greater penetration and more uniform distribution of Fe in GAC. This led to a condition where Fe, MTBE, and H{sub 2}O{sub 2} coexisted over a larger volume of the GAC contributing to greater MTBE oxidation and removal. H{sub 2}O{sub 2} reaction and MTBE removal in GAC increased with temperature. Modeling H{sub 2}O{sub 2} transport and reaction in GAC indicated that H{sub 2}O{sub 2} penetration was inversely proportional with temperature and tortuosity, and occurred over a larger fraction of the total volume of small GAC particles (0.3 mm diameter) relative to large particles (1.2 mm diameter). Acidic pretreatment of GAC, Fe-amendment, elevated reaction temperature, and use of small GAC particles are operational parameters that improve Fenton-driven oxidation of MTBE in GAC. 29 refs., 6 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗