Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LANDING SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Suprathermal ions near the moon.

This paper reports some preliminary results from the suprathermal ion detectors deployed on the lunar surface by the Apollo 12 and 14 astronauts. Salient features of these results include: the possible observation of sporadic venting of gas from the lunar surface; evidence for a prompt ionization and acceleration mechanism operating in the lunar exosphere; and a preliminary measurement yielding approximately 1 month for the e-folding decay time for the heavier components of the exhaust gases from the Apollo lunar landing systems. Prominent phenomena from which these results have been derived are: (1) ion bursts of low to moderate energy seen in conjunction with lunar sunrise and sunset; (2) solar wind energy ions detected on the night side of the moon; (3) ions of several keV energy seen during the lunar sunset to midnight quadrant of the moon's orbit; (4) magnetosheath ion flux enhancements; (5) ion bursts generated by the lunar impact of the Apollo 13 Saturn upper stage; and (6) geomagnetic storm associated ion flux variations in the earth's magnetotail.

Freeman, J. W., Jr.↗

Flexible wings for transportation.

The possible uses of flexible wings for transportation of passengers and cargo from point to point on earth are discussed along with emergency applications of flexible wings in connection with conventional aircraft. Topics considered include gliding and soaring as a sport, towing of flexible-wing gliders for cargo delivery, powered flight with small aircraft having folding flexible wings, aerial dropping of personnel and cargo on flexible wings instead of parachutes, landing and recovery of rocket payloads by means of flexible wings, and use of flexible wings with ejection seats and as an emergency landing system for conventional aircraft.

Rogallo, F. M.↗

A dynamic response and eye scanning data base useful in the development of theories and methods for the description of control/display relationships

A set of specially prepared digital tapes is reported which contain synchronized measurements of pilot scanning behavior, control response, and vehicle response obtained during instrument landing system approaches made in a fixed-base DC-8 transport simulator. The objective of the master tape is to provide a common data base which can be used by the research community to test theories, models, and methods for describing and analyzing control/display relations and interactions. The experimental conditions and tasks used to obtain the data and the detailed format of the tapes are described. Conventional instrument panel and controls were used, with simulated vertical gust and glide slope beam bend forcing functions. Continuous pilot eye fixations and scan traffic on the panel were measured. Both flight director and standard localizer/glide slope types of approaches were made, with both fixed and variable instrument range sensitivities.

Klein, R.↗

Effective use of ERTS multisensor data in the Great Plains

The author has identified the following significant results. In the case of rangelands, manipulation of the digitized material from photographic recordings revealed that the mode-seeking program using only one vegetation group gave the best output map. Efficient mapping of this imagery will possibly require the use of narrow band filters. In the case of cropland, the results obtained with the K-class classifier are shown. Using one feature, the highest percent correct classification was obtained using band 6. Using two features, best results were obtained using bands 4 and 6 and 5 and 6. Specific results obtained with various bands are discussed. In the case of land systems, the eroded shale soils located along the Missouri River reservoirs in South Dakota above the Fort Randall and Big Bend Dams are clearly visible on the IR bands of ERTS scene 17 August, 1972, image description number 1025-16551. The appearance of various types of soil formations is described.

Myers, V. I.↗

Noise measurements obtained during engineering evaluation of two-segment approaches in a 727-200 aircraft

A series of noise measurements were made during engineering evaluation tests of two-segment approaches in a 727-200 aircraft equipped with acoustically treated nacelles. A two-segment approach having a 6-degree upper glide slope angle intercepting the Instrument Landing System (ILS) 2.9-degree glide slope at an altitude of 690 feet gave a 5-EPNdB decrease in measured noise at distances greater than 3 nautical miles from the runway threshold when compared with a normal ILS approach. Several of the noise measurements were taken under adverse weather conditions which were outside the specified limits of FAR Part 36. This may introduce uncertainties into the data from several approaches.

Tanner, C. S.↗

Landing approach evaluation of an integrated CRT display for general aviation aircraft

A flight director adaptable to general aviation aircraft was evaluated for the landing approach task in a twin turbojet business aircraft. The flight director combined aircraft heading, pitch and roll atitude, and ILS (Instrument Landing System) signals into a single picture on a small cathode ray tube (CRT) to give the pilot an integrated picture of the aircraft situation. The display is unique in that it presents the information on a CRT and gives quasi-command signals to the pilot. The particular display investigated was a preproduction version of the Kaiser Model FP-50 flight director. Approaches made with visual references only, with a conventional ILS displacement instrument, and with the CRT display were compared in terms of tracking performance and pilot workload. Tracking performance of three research pilots using the CRT display was superior to that using the conventional ILS instrument and comparable to that under VFR conditions. Pilot workload (based on pilot comments) was not clearly decreased.

Talbot, P. D.↗

A flight investigation with a STOL airplane flying curved, descending instrument approach paths

A flight investigation using a De Havilland Twin Otter airplane was conducted to determine the configurations of curved, 6 deg descending approach paths which would provide minimum airspace usage within the requirements for acceptable commercial STOL airplane operations. Path configurations with turns of 90 deg, 135 deg, and 180 deg were studied; the approach airspeed was 75 knots. The length of the segment prior to turn, the turn radius, and the length of the final approach segment were varied. The relationship of the acceptable path configurations to the proposed microwave landing system azimuth coverage requirements was examined.

Benner, M. S.↗

A study of the usefulness of Skylab EREP data for earth resources studies in Australia

The author has identified the following significant results. The stereo cover of the Skylab photos, their clarity, and their resolution put them far above the ERTS imagery not only in distinguishing between patterns but also in determining the nature of the country. The following land systems: (1) plains with sand dunes; (2) ridges, foothills, and alluvial plains; (3) dune-covered country with stony hills; and (4) alluvial plains were indistinguishable on the ERTS imagery. However, the same places are clearly distinguishable on the Skylab photos, together with the character of the dunes (parallel, reticulate, or irregular).

Maffi, C. E.↗

New design and operating techniques for improved terminal area compatibility

Current aircraft operating problems that must be alleviated for future high-density terminal areas are safety, dependence on weather, congestion, energy conservation, noise, and atmospheric pollution. The microwave landing system (MLS) under development by FAA provides increased capabilities over the current ILS. It is, however, necessary and urgent to develop the airborne system's capability to take maximum advantage of the MLS capabilities in order to solve the terminal area problems previously mentioned. A major limiting factor in longitudinal spacing for capacity increase is the trailing vortex hazard. Promising methods for causing early dissipation of the vortices are being explored. Also, flight procedures for avoiding the hazard will be explored.

Reeder, J. P.↗

New design and operating techniques and requirements for improved aircraft terminal area operations

Current aircraft operating problems that must be alleviated for future high-density terminal areas are safety, dependence on weather, congestion, energy conservation, noise, and atmospheric pollution. The Microwave Landing System (MLS) under development by FAA provides increased capabilities over the current ILS. The development of the airborne system's capability to take maximum advantage of the MLS capabilities in order to solve terminal area problems are discussed. A major limiting factor in longitudinal spacing for capacity increase is the trailing vortex hazard. Promising methods for causing early dissipation of the vortices were explored. Flight procedures for avoiding the hazard were investigated. Terminal configured vehicles and their flight test development are discussed.

Reeder, J. P.↗

Analytical evaluation of ILM sensors. Volume 2: Appendices

The applicability of various sensing concepts to independent landing monitor systems was analyzed. Microwave landing system MLS accuracy requirements are presented along with a description of MLS airborne equipment. Computer programs developed during the analysis are described and include: a mathematical computer model for use in the performance assessment of reconnaissance sensor systems; a theoretical formulation of electromagnetic scattering to generate data at high incidence angles; atmospheric attenuation of microwaves; and microwave radiometry, programs

Kirk, R. J.↗

Aeroflight communications and RF navaids

The principal operational requirements of the Space Shuttle Program concept of a low cost reliable and reusable orbital vehicle are outlined, and the aerial navigation and landing systems selected for the vehicle are discussed, along with their interfaces with the control and navigation systems. It is shown how the atmospheric flight systems were developed by adapting well-proven designs to a new application. Design improvements were held to a minimum, with no new concepts or extensive modifications required that might compromise previous system experience or qualification status. Newest concepts, such as digital designs, serial digital control, etc., as well as integration of software and hardware were accomplished to control and manage time critical processes, such as BIT and redundancy management. Appropriate planning and careful appraisals preceeded the selection of a system.-

Lilly, D. S.↗

Comparisons of pilot performance in simulated and actual flight

Five highly experienced professional pilots performed instrument landing system approaches under simulated instrument flight conditions in a Cessna 172 airplane and in a Link-Singer GAT-1 simulator while under the influence of orally administered secobarbital (0, 100, and 200 mg). Tracking performance in two axes and airspeed control were evaluated continuously during each approach. Error and RMS variability were about half as large in the simulator as in the airplane. The observed data were more strongly associated with the drug level in the simulator than in the airplane. Further, the drug-related effects were more consistent in the simulator. Improvement in performance suggestive of learning effects were seen in the simulator, but not in actual flight.

Billings, C. E.↗

Optimization of MLS receivers for multipath environments

A receiver is designed for aircraft (A/C), which, as a component of the proposed Microwave Landing System (MLS), is capable of optimal performance in the multipath environments found in air terminal areas. Topics discussed include: the angle-tracking problem of the MLS receiver; signal modeling; preliminary approaches to optimal design; suboptimal design; and simulation study.

Mcalpine, G. A.↗