Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Inverse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Spin wave interference detection via inverse spin Hall effect

Here, in this Letter, we present experimental data that demonstrate a spin wave interference detection using an inverse spin Hall effect (ISHE). Two coherent spin waves are excited in a yttrium-iron garnet waveguide by continuous microwave signals. The initial phase difference between the spin waves is controlled by the external phase shifter. The ISHE voltage is detected at a distance of 2 and 4 mm away from the spin wave generating antennas by an attached Pt layer. Experimental data show ISHE voltage oscillation as a function of the phase difference between the two interfering spin waves. This experiment demonstrates an intriguing possibility of using ISHE in a spin wave logic circuit converting a spin wave phase into an electric signal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Alcove formation in dissolving cliffs driven by density inversion instability

We demonstrate conditions that give rise to cave-like features commonly found in dissolving cliffsides with a minimal two-phase physical model. Alcoves that are wider at the top and tapered at the bottom, with sharp-edged ceilings and sloping floors, are shown to develop on vertical solid surfaces dissolving in aqueous solvents. As evident from descending plumes, sufficiently large indentations evolve into alcoves as a result of the faster dissolution of the ceiling due to a solutal Rayleigh–Bénard density inversion instability. In contrast, defects of size below the boundary layer thickness set by the critical Rayleigh number smooth out, leading to stable planar interfaces. Furthermore, the ceiling recession rate and the alcove opening area evolution are shown to be given to first-order by the critical Rayleigh number. By tracking passive tracers in the fluid phase, we show that the alcoves are shaped by the detachment of the boundary layer flow and the appearance of a pinned vortex at the leading edge of the indentations. The attached boundary layer past the developing alcove is then found to lead to rounding of the other sides and the gradual sloping of the floor.

58 GEOSCIENCES↗
DOE OSTI2023

Experimental demonstration of >20 kJ laser energy coupling in 1-cm hydrocarbon-filled gas pipe targets via inverse Bremsstrahlung absorption with applications to MagLIF

Laser propagation experiments using four beams of the National Ignition Facility to deliver up to 35 kJ of laser energy at 351 nm laser wavelength to heat magnetized liner inertial fusion-scale (1 cm-long), hydrocarbon-filled gas pipe targets to ~keV electron temperatures have demonstrated energy coupling >20 kJ with essentially no backscatter in 15% critical electron density gas fills with 0–19 T applied axial magnetic fields. The energy coupling is also investigated for an electron density of 11.5% critical and for applied field strengths up to 24 T at both densities. This spans a range of Hall parameters 0 < ω ce τ ei ≲ 2, where a Hall parameter of 0.5 is expected to reduce electron thermal conduction across the field lines by a factor of 4–5 for the conditions of these experiments. At sufficiently high applied field strength (and therefore Hall parameter), the measured laser propagation speed through the targets increases in the measurements, consistent with reduced perpendicular electron thermal transport; this reduces the coupled energy to the target once the laser burns through the gas pipe. In conclusion, the results compare well with a 1D analytic propagation model for inverse Bremsstrahlung absorption.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Quantifying uncertainty in analysis of shockless dynamic compression experiments on platinum. I. Inverse Lagrangian analysis

Absolute measurements of solid-material compressibility by magnetically driven shockless dynamic compression experiments to multi-megabar pressures have the potential to greatly improve the accuracy and precision of pressure calibration standards for use in diamond anvil cell experiments. Here, to this end, we apply characteristics-based inverse Lagrangian analysis (ILA) to 11 sets of ramp-compression data on pure platinum (Pt) metal and then reduce the resulting weighted-mean stress–strain curve to the principal isentrope and room-temperature isotherm using simple models for yield stress and Grüneisen parameter. We introduce several improvements to methods for ILA and quasi-isentrope reduction, the latter including calculation of corrections in wave speed instead of stress and pressure to render results largely independent of initial yield stress while enforcing thermodynamic consistency near zero pressure. More importantly, we quantify in detail the propagation of experimental uncertainty through ILA and model uncertainty through quasi-isentrope reduction, considering all potential sources of error except the electrode and window material models used in ILA. Compared to previous approaches, we find larger uncertainty in longitudinal stress. Monte Carlo analysis demonstrates that uncertainty in the yield-stress model constitutes by far the largest contribution to uncertainty in quasi-isentrope reduction corrections. We present a new room-temperature isotherm for Pt up to 444 GPa, with 1-sigma uncertainty at that pressure of just under ±1.2%; the latter is about a factor of three smaller than uncertainty previously reported for multi-megabar ramp-compression experiments on Pt. The result is well represented by a Vinet-form compression curve with (isothermal) bulk modulus K 0 = 270.3 ± 3.8 GPa, pressure derivative K$^{'}_{0}$= 5.66 ± 0.10, and correlation coefficient $R_{K_{0},K^{'}_{0}}$= –0.843.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Reducing Richtmyer–Meshkov instability jet velocity via inverse design

In this work, we detail a novel application of inverse design and advanced manufacturing to rapidly develop and experimentally validate modifications to a shaped charge jet analog. The shaped charge jet analog comprises a copper liner, a high explosive (HE), and a silicone buffer. Here, we apply a genetic algorithm to determine an optimal buffer design that can be placed between the liner and the HE that results in the largest possible change in jet velocity. The use of a genetic algorithm allows for discoveries of unintuitive, complex, yet optimal buffer designs. Experiments using the optimal design verified the effectiveness of the buffer and validated the machine learning approach to hydrodynamic design optimization.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Inverse-designed broadband low-loss grating coupler on thick lithium-niobate-on-insulator platform

A grating coupler on 700-nm-thick Z-cut lithium-niobate-on-insulator platform with high coupling efficiency, large bandwidth, and high fabrication tolerance is designed and optimized by inverse design method. The optimized grating coupler is fabricated with a single set of e-beam lithography and etching process, and it is experimentally characterized to possess peak coupling efficiency of −3.8 dB at 1574.93 nm, 1 dB bandwidth of 71.7 nm, and 3 dB bandwidth of over 120 nm, respectively.

Physics↗
DOE OSTI2024

Inverse design of pore wall chemistry and topology through active learning of surface group interactions

Design of next-generation membranes requires a nanoscopic understanding of the effect of biologically inspired heterogeneous surface chemistries and topologies (roughness) on local water and solute behavior. In particular, the rejection of small, neutral solutes, such as boric acid, poses a heretofore unsolved challenge. In prior work, a computational inverse design technique using an evolutionary optimization successfully uncovered new surface design strategies for optimized transport of water over solutes in smooth, model pores consisting of two surface chemistries. However, extending such an approach to more complex (and realistic) scenarios involving many surface chemistries as well as surface roughness is challenging due to the expanded design space. In this work, we develop a new approach that uses active learning to optimize in a reduced feature space of surface group interactions, finding parameters that lead to their assembly into ordered, optimal patterns. This approach rapidly identifies novel surface functionalizations that maximize the difference in water and boric acid transport through the nanopore. Moreover, we find that the roughness of the nanopore wall, independent of its chemistry, can be leveraged to enhance transport selectivity: oscillations in the pore wall diameter optimally inhibit boric acid transport by creating energetic wells from which the solute must escape to transport down the pore. Furthermore, this proof-of-concept demonstrates the potential for active learning strategies, in concert with molecular simulations, to rapidly navigate complex design spaces of aqueous interfaces and is promising as a tool for engineering water-mediated surface interactions for a broad range of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Inverse aspect-ratio expanded tokamak equilibria

Following Greene et al. [Phys. Fluids 14, 671 (1971)] and Connor et al. [Phys. Plasmas 31, 577 (1988); Plasma Phys. Control. Fusion 34, 161 (1992); and Nucl. Fusion 33, 1533 (1993)], the Grad-Shafranov equation for an axisymmetric tokamak plasma equilibrium is solved via an expansion in the, supposedly small, inverse aspect-ratio of the plasma, ϵ. The displacements of equilibrium magnetic flux-surfaces due to plasma shaping are assumed to be $\mathcal{O}$(ϵ) smaller than the minor radii of the surfaces, but no other restriction is placed on the nature of the shaping. The solution of the Grad-Shafranov equation is matched to a vacuum solution that extends to infinity, and consists of an expansion in toroidal functions. The external poloidal magnetic field generated by a finite set of discrete external poloidal magnetic field-coils is calculated, and incorporated into the toroidal function expansion. In this manner, the shape of a large aspect-ratio tokamak plasma is directly related to the currents flowing in the external poloidal field-coils. Finally, a pedestal in the plasma pressure, and the associated spike in the bootstrap current, are incorporated into the model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Calculation of tearing mode stability in an inverse aspect-ratio expanded tokamak plasma equilibrium

The tearing mode stability of an inverse aspect-ratio expanded tokamak plasma equilibrium of general shape is investigated using asymptotic matching techniques. Particular emphasis is placed on the conservation of toroidal electromagnetic angular momentum. The TJ code, which is a specific implementation of the results of the investigation, is described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Excited electronic states of Na 2 and K 2 : The potential for long-lived “reservoir” states leading to collision induced population inversions

Potential energy curves (PECs) for the spin-free (ΛS) and spin–orbit (Ω) states associated with the four lowest-lying dissociation channels of Na 2 and K 2 were calculated at the SA-CASSCF/SO-CASPT2/aug-cc-pwCVQZ-DK level. The PECs of Na 2 were consistent with the experimental data and with the FS-CCSD (2,0) calculations, reproducing the double-well and the “shelf” character for some of the potentials of the excited states. For K 2 , the PECs behaved in a similar way and the spectroscopic parameters for the ground and the excited states are in good agreement with the available experimental values. The dissociation energy of K 2 was predicted to be D e = 4454 cm −1 , within an agreement of 5 cm −1 with the experiments. For Na 2 , D e = 5789 cm −1 compared to the experimental value of 6022 cm −1 . The inclusion of spin–orbit coupling effects resulted in avoided crossings, which affect the PECs. Spin–orbit changes the predicted curves for some excited Ω states arising from ΛS states that overlap each other, affecting their associated vibrational frequencies and bond distances. Here, the current studies of the low-lying states in K 2 reveal a similar structure to those of Na 2 , which suggests the accessibility of long-lived energy storing reservoir states and possible population inversions in K 2 following prior experimental work on the reaction of halogen atoms with Na 3 to produce excited states of Na 2 .

Ab-initio methods↗
DOE OSTI2025

3D strain field reconstruction by inversion of dynamical scattering

Strain governs not only the mechanical response of materials but also their electronic, optical, and catalytic properties. For this reason, the measurement of the 3D strain field is crucial for a detailed understanding and for further development of material properties through strain engineering. However, measuring strain variations along the electron beam direction has remained a major challenge for (scanning-) transmission electron microscopy (S/TEM). In this article, we present a method for 3D strain field determination using 4D-STEM. The method is based on the inversion of dynamical diffraction effects, which occur at strain field variations along the beam direction. We test the method against simulated data with a known ground truth and demonstrate its application to an experimental 4D-STEM dataset from an inclined pseudomorphically grown Al0.47Ga0.53N layer.

Niermann, Laura↗
DOE OSTI2025

A novel closed-form inversion of the convection–diffusion equation for rapid convection, diffusion, and source profile estimation

To simplify and routinize particle transport analysis in fusion devices, a novel closed form linear inversion of the 1-D convection diffusion equation to estimate diffusion and convection profiles D(r ⃗ ), v(r ⃗ ) and source distribution s(r ⃗ ), of a single species from measured data is derived and demonstrated on synthetic data. Profile estimates of D(r ⃗ ), v(r ⃗ ), s(r ⃗ ) and their uncertainties are given as a matrix expression constructed directly from the incoming density data of the transported species in space and time, as well as physics assumptions such as particle conservation and experimental geometry. The derived matrix expression can be applied to a pumped or non-pumped recycling species, or a non-recycling species that is effectively “pumped” by plasma-facing surfaces.

Hinson, Edward [ORNL] (ORCID:000000019713140X)↗
DOE OSTI2020

Features of multilayer mirror application for focusing and collimating X-rays from inverse Compton scattering sources

We have analysed the use of X-ray interference multilayer mirrors as the elements of a focusing scheme for a compact source based on inverse Compton scattering. An algorithm is proposed for selecting mirror parameters, which takes into account the properties of the radiation source. The dependence of wavelength on the viewing angle and the energy line broadening for a fixed viewing angle are found to be the main limitations in the use of multilayer mirrors. Efficient radiation collection calls for the application of broadband mirrors. It is shown that the efficiency of multilayer mirrors in a Kirkpatrick – Baez X-ray focusing setup exceeds that of total external reflection mirrors by an order of magnitude, and that stack multilayer mirrors offer a small advantage over the periodic ones. The overall efficiency of source radiation collection in the photon energy range ΔE = 10 – 12 keV amounts to 12 % for the two-mirror Kirkpatrick – Baez setup. For a spectral region with a bandwidth ΔE/E = 3 %, the efficiency ranges up to 69 %. (paper)

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

A New Galerkin Quadrature Method Not Requiring a Matrix Inverse

We derive a new Galerkin quadrature (GQ) method for S 𝑛 calculations that differs from the two methods preceding it in that a matrix inverse for an 𝑁 𝑑 × 𝑁 𝑑 matrix, where 𝑁𝑑 is the number of directions in the quadrature set, is no longer required. Galerkin quadrature methods are designed for calculations with highly anisotropic scattering. Such methods are not simply special angular quadratures but also are methods for representing the S 𝑛 scattering source that offers several advantages relative to the standard scattering source representation when highly truncated Legendre cross-section expansions must be used. Galerkin quadrature methods are also useful when the scattering is moderately anisotropic, but the quadrature being used is not sufficiently accurate for the order of the scattering source expansion that is required. Furthermore, we derive the new method and present computational results showing that its performance for two challenging problems is comparable to those of the two GQ methods that preceded it.

Galerkin quadrature↗
DOE OSTI2021

Interacting fermions in narrow-gap semiconductors with band inversion

Abstract Highly unconventional behavior of the thermodynamic response functions has been experimentally observed in a narrow gap semiconductor samarium hexaboride. Motivated by these observations, we use renormalization group technique to investigate many-body instabilities in the f -orbital narrow gap semiconductors with band inversion in the limit of weak coupling. By projecting out the double occupancy of the f -states we formulate a low-energy theory describing the interacting particles in two hybridized electron- and hole-like bands. The interactions are assumed to be weak and short-ranged. We take into account the difference between the effective masses of the quasiparticles in each band. Upon carrying out the renormalization group analysis we find that there is only one stable fixed point corresponding to the excitonic instability with time-reversal symmetry breaking for small enough mismatch between the effective masses.

Physics↗
DOE OSTI2024

Magnetic tunability in tetragonal Mn–Rh–Ir–Sn inverse Heusler compounds

Abstract Gaining control over magnetic structure has been an ongoing challenge in materials that form complex, nanoscale, and non-collinear magnetic configurations. Recently, it was predicted that tuning the ratio of the Dzyaloshinskii–Moriya interaction to the uniaxial magnetic anisotropy in tetragonal inverse Heuslers through changes in composition could allow a range of interesting magnetic states to be accessed, from simple ferrimagnetism, to helical and antiskyrmionic phases. Here, we show tunability of the magnetic phase behavior in the Mn–Rh–Sn system through Ir substitution on the Rh substructure. Iridium substitution correlates to an increase in the strength of ferromagnetic exchange couplings, at the expense of antiferromagnetic exchange couplings. However, we do not observe the complex non-collinear magnetic phases proposed previously, likely due to the extremely narrow composition window where these phases are predicted to form in a bulk sample. This work highlights the sensitivity of complex magnetic structures to stoichiometry, which makes them difficult to discover empirically.

Physics↗
DOE OSTI2025

Novel inverse oxide/metal catalysts for methanol synthesis: impact of oxide–metal interactions and reversible morphological changes

Inverse oxide/metal catalysts have proved to be excellent systems for the generation of methanol by CO 2 hydrogenation or the partial oxidation of methane. These systems can exhibit unique structural and chemical properties due to the nano size of the oxide component and strong oxide–metal interactions. Recent studies for ZnO/Cu, CeO 2 /Cu, TiO 2/ Cu, MgO/Cu, In 2 O 3 /Cu, and In 2 O 3 /Au catalysts have shown large variations in the composition and morphology of the oxide overlayer as a function of temperature and chemical environment. These oxide–metal interfaces are able to react with CO 2 and CH 4 at room temperature, and both reactants have a strong influence on the physical and chemical properties of the catalysts. Under reaction conditions, switches between oxide–metal and metal–metal interfaces can take in the catalyst surface. A dynamic behavior that can be linked to a high selectivity for methanol production over systems such as ZnO/Cu, CeO 2 /Cu and In 2 O 3 /Au. Finally, this type of correlation deserves additional systematic studies since it could be a powerful tool for designing highly efficient catalysts for methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Inverse metal-assisted chemical etching of germanium with gold and hydrogen peroxide

Abstract Metal-assisted chemical etching (MACE) is a flexible technique for texturing the surface of semiconductors. In this work, we study the spatial variation of the etch profile, the effect of angular orientation relative to the crystallographic planes, and the effect of doping type. We employ gold in direct contact with germanium as the metal catalyst, and dilute hydrogen peroxide solution as the chemical etchant. With this catalyst-etchant combination, we observe inverse-MACE, where the area directly under gold is not etched, but the neighboring, exposed germanium experiences enhanced etching. This enhancement in etching decays exponentially with the lateral distance from the gold structure. An empirical formula for the gold-enhanced etching depth as a function of lateral distance from the edge of the gold film is extracted from the experimentally measured etch profiles. The lateral range of enhanced etching is approximately 10–20 μ m and is independent of etchant concentration. At length scales beyond a few microns, the etching enhancement is independent of the orientation with respect to the germanium crystallographic planes. The etch rate as a function of etchant concentration follows a power law with exponent smaller than 1. The observed etch rates and profiles are independent of whether the germanium substrate is n-type, p-type, or nearly intrinsic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗