Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRIDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Tantalum-stabilized ruthenium oxide electrocatalysts for industrial water electrolysis

The iridium oxide (IrO 2 ) catalyst for the oxygen evolution reaction used industrially (in proton exchange membrane water electrolyzers) is scarce and costly. Although ruthenium oxide (RuO 2 ) is a promising alternative, its poor stability has hindered practical application. Here, we used well-defined extended surface models to identify that RuO 2 undergoes structure-dependent corrosion that causes Ru dissolution. Tantalum (Ta) doping effectively stabilized RuO 2 against such corrosion and enhanced the intrinsic activity of RuO 2 . In an industrial demonstration, Ta-RuO 2 electrocatalyst exhibited stability near that of IrO 2 and had a performance decay rate of ~14 microvolts per hour in a 2800-hour test. At current densities of 1 ampere per square centimeter, it had an overpotential 330 millivolts less than that of IrO 2 .

Zhang, Jiahao [Sichuan Univ., Chengdu (China); Uni↗

The growth of Ho:YAG single crystals by Czochralski method and investigating the formed cores

Ho:YAG single crystals were grown by Czochralski technique, and investigated by the X-ray diffraction (XRD) and optical methods. The crystals were cut and polished in order to observe and analyze their cores. It was found that the deviation of the cores formed in the Czochralski grown Ho:YAG single crystals are resulted from non-symmetrical status of thermal insulation around the Iridium crucible.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiple Reaction Pathways for the Oxygen Evolution Reaction May Contribute to IrO 2 (110)’s High Activity

Density functional theory calculations in conjunction with statistical mechanical arguments are performed on the rutile IrO 2 (110) facet in order to characterize multiple reaction pathways on the surface at the highest active limit (the stoichiometric surface with all metal sites available) and at the lowest active limit (the oxygen-terminated surface). Alternative pathways to the oxygen evolution reaction (OER) are found, with multiple pathways determined at each step of the four proton-coupled electron transfer reaction. Of particular interest is the detailed characterization of a co-adsorption pathway utilizing neighboring, adsorbed O, OH species in order to evolve oxygen; activation energies of this pathway are <0.5 eV and therefore easily surmountable at the high operating potentials of OER. We also determined that surface Ir atoms can potentially participate in deprotonating an OOH* intermediate; the activation energy to this is 0.67 eV on the oxygen-terminated surface. These theoretical findings explain in part the high activity present in iridium oxide catalysts and also provide insight into the mechanistic pathways available on metal oxide catalysts, which may require the concerted interaction of nearest neighbor co-adsorbates to produce chemicals of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrolyzer Performance Loss from Accelerated Stress Tests and Corresponding Changes to Catalyst Layers and Interfaces

Stress tests are developed for proton exchange membrane electrolyzers that utilize low catalyst loading, elevated potential, and frequent cycling with square- and triangle-waves to accelerate anode catalyst layer degradation during intermittent operation. Kinetics drive performance losses (ohmic/transport secondary) and are accompanied by decreasing exchange current density, decreasing cyclic voltammetric capacitance, and increasing polarization resistance. Decreased kinetics are likely due to a combination of iridium (Ir) migration into electrochemically inaccessible locations in the anode or membrane, Ir particle growth (supported by X-ray scattering), changes in the extent of the Ir oxidation state (supported by X-ray absorption spectroscopy), and anode catalyst layer reordering. Decreasing catalyst/transport layer contact and catalyst/membrane interfacial tearing may add contact resistances and account for increasing ohmic losses. Performance losses for low and moderate catalyst loading, as well as from accelerated and model wind/solar cycling protocols, were likewise dominated by kinetics but vary in severity. Additionally, accelerated cycling (1 cycle per minute) appears to reasonably accelerate relevant loss mechanisms and can be used to project electrolyzer lifetime from anode deterioration. Ongoing accelerated stress test development and studies into performance loss mechanisms will continue to be critical as electrolysis shifts to intermittent power and low-cost applications.

30 DIRECT ENERGY CONVERSION↗

Degradation Effects at the Porous Transport Layer/Catalyst Layer Interface in Polymer Electrolyte Membrane Water Electrolyzer

The porous transport layer (PTL)/catalyst layer (CL) interface plays a crucial role in the achievement of high performance and efficiency in polymer electrolyte membrane water electrolyzers (PEMWEs). This study investigated the effects of the PTL/CL interface on the degradation of membrane electrode assemblies (MEAs) during a 4000 h test, comparing the MEAs assembled with uncoated and Ir-coated Ti PTLs. Our results show that compared to an uncoated PTL/CL interface, an optimized interface formed when using a platinum group metal (PGM) coating, i.e., an iridium layer at the PTL/CL interface, and reduced the degradation of the MEA. The agglomeration and formation of voids and cracks could be found for both MEAs after the long-term test, but the incorporation of an Ir coating on the PTL did not affect the morphology change or oxidation of IrO x in the catalyst layer. In addition, our studies suggest that the ionomer loss and restructuring of the anodic MEA can also be reduced by Ir coating of the PTL/CL interface. Optimization of the PTL/CL interface improves the performance and durability of a PEMWE.

30 DIRECT ENERGY CONVERSION↗

Catalyst Layer Resistance and Utilization in PEM Electrolysis

Improving utilization, performance, and stability of low iridium (Ir)-loaded anodes is a key goal to enable widespread adoption of polymer electrolyte membrane water electrolysis (PEMWE) for clean hydrogen production. A potential limitation is high ionic or electronic resistance of the anode catalyst layer, which leads to poor catalyst utilization, increased voltage losses, and high local overpotentials that can accelerate degradation. While catalyst layer resistance is relatively well-understood in fuel cells and other porous electrode systems, characterization of these effects is not as well established in PEMWE research. Here we present in-situ methods for measuring catalyst layer resistance in electrolysis cells using a non-faradaic H 2 /H 2 O condition as well as methods for calculating the associated voltage losses. These methods are applied to anode catalyst layers based on IrO 2 nanoparticles as well as dispersed nano-structured thin film (NSTF) Ir catalysts. Trends with anode catalyst loading and interactions between the porous transport layer and catalyst layer are investigated for IrO 2 anodes. Post-mortem microscopic analysis of durability-tested anodes is also presented, showing uneven degradation of the catalyst layer caused by catalyst layer resistance.

08 HYDROGEN↗

Durability Optimization of CO 2 Electrolyzers for Syngas Evolution

Recently, there has been an increased interest in mitigating anthropogenic CO 2 emissions through the electrochemical conversion of CO 2 into fuels and fuel feedstocks, including hydrogen gas (H 2 ), carbon monoxide (CO), and mixtures of the two to yield syngas. Commercial applications of these systems require high catalytic selectivity for the desired products, while exhibiting operational lifetimes exceeding thousands of hours. Advancements in this field have produced systems that display high selectivity of the desired products at faradaic efficiencies exceeding 95%. Despite the advancements made in CO 2 electrolysis, system durability remains a standing challenge in the field. CO 2 electrolyzer lifetimes are often limited by carbonate fouling, catalyst degradation, detrimental flooding of electrode microporous layers and anion exchange membrane (AEM) failures. In this report, a 5 cm 2 membrane electrode assembly (MEA) device is used to investigate potential failure modes and to optimize AEM CO 2 electrolyzer operation. Key findings of this study include the importance of CO 2 flow rate, use of a thin PiperION PTFE-reinforced membrane, optimizing compression to enhance contact under 40 in-lb compression, and the effect of more compressible, commercial iridium oxide anodes on system durability.

Abouremeleh, Mohammed H. [Lawrence Berkeley Nation↗

The Impact of Operational Strategies and Load Fluctuations on Anion Exchange Membrane Water Electrolyzer Degradation

This study reports on the durability of anion exchange membrane water electrolyzers (AEMWEs) at the cell level in a supporting electrolyte (1 M) and the impact of operational profiles on cell degradation. While constant load shows significant voltage loss, including a current hold at 1 A cm −2 and a potential hold at 2 V, it generally occurs in the first 70 h of testing. These losses are likely due to passivation altering site reactivity and cell kinetics, and are largely recoverable upon load cycling and diagnostics at the end of test. Furthermore, square and triangular-wave cycling do not show cell degradation and indicate that AEMWEs are not vulnerable to load cycling. When operating outside of this potential window (1.45–2 V), cell voltage decay rates markedly increase and the losses are not recoverable. This includes a current density hold at 4.0 A cm −2 with high cell voltages (>2.4 V for test duration) and cycling between 0 and 2 V to simulate start–stop, where more than a 50% loss in current density occurs over 50 h. The findings presented here demonstrate the high durability of AEMWEs, particularly when operating with load fluctuations, and may allow for durability advantages compared to iridium and proton exchange membrane systems.

08 HYDROGEN↗

A Materials-Based Mitigation Strategy for SU/SD in PEM Fuel Cells: Properties and Performance-Specific Testing of IrRu OER Catalysts.

Catalysts that enable proton exchange membrane fuel cells to weather the damaging conditions experienced during transient periods of fuel starvation have been developed. The addition of minute amounts of iridium and ruthenium to the cathode enhances the oxygen evolution reaction (OER) during start-up/shutdown events, thus lowering the peak cell voltage closer to the onset of water oxidation. The catalyst loadings ranged from 1 to 10 g/cm2, but showed surprisingly high activity and durability. At such low loadings, it is possible to fully integrate the OER catalysts with negligible interference on fuel cell performance and a marginal increase in catalyst cost.

Atanasoski, Radoslav↗

Advanced Hydrogen-Bromine Flow Batteries with Improved Efficiency, Durability and Cost

The hydrogen/bromine flow battery is a promising candidate for large-scale energy storage due to fast kinetics, highly reversible reactions and low chemical costs. However, today's conventional hydrogen/bromine flow batteries use membrane materials (such as Nafion), platinum catalysts, and carbon-paper electrode materials that are expensive. In addition, platinum catalysts can be poisoned and corroded when exposed to HBr and Br 2 , compromising system lifetime. To reduce the cost and increase the durability of H 2 /Br 2 flow batteries, new materials are developed. The new Nafion/polyvinylidene fluoride electrospun composite membranes have high perm-selectivity at a fraction of the cost of Nafion membranes; the new nitrogen-functionalized platinum-iridium catalyst possesses excellent activity and durability in HBr/Br 2 environment; and the new carbon-nanotube-based Br 2 electrodes can achieve equal or better performance with less materials when compared to baseline electrode materials. Preliminary cost analysis shows that the new materials reduce H 2 /Br 2 flow-battery energy-storage system stack and system costs significantly. The resulting advanced H 2 /Br 2 flow batteries offer high power, high efficiency, substantially increased durability, and expected reduced cost.

25 ENERGY STORAGE↗

Tafel Fitter v1.5

This program a new physical insight regarding efforts to evaluate electrochemical catalysts being developed for electrochemical energy conversion and storage. In particular, we ask: The methodology described here offers a solution to the problem of how to conduct Tafel analysis, which is used in determining electrocatalyst performance, in a quantitative manner, rather than through the qualitative guesswork it currently requires. This enables the measurement of electrocatalyst Tafel slopes and their associated parameters in a way that avoids the introduction of researcher bias, a problem to which current methods of Tafel fitting are prone. This procedure should significantly improve the ability of researchers working in the field of electrochemical energy conversion to rate and compare the catalyst materials being developed, advancing the characterization toolkit available to experimental electrochemists. This work is born out of our general hypothesis that it should be possible to determine the proper regions for unambiguously fitting Tafel data by applying some set of physical constraints that link aspects of a Tafel plot to its corresponding J-V polarization curve. This algorithm applies such constraints and achieves the extraction of Tafel slopes in a wholly quantifiable and reliable fashion. Verification of this approach is achieved by pairing the theory with experiment, as the algorithm was tested using experimentally acquired data of three distinct, electrochemical reactions: platinum hydrogen evolution, iridium-catalyzed oxygen evolution, and platinum-catalyzed dioxygen reduction. For each of these cases, the algorithm predicts the same Tafel slope as those reported in long-established bodies of electrochemical literature, results suggesting the general applicability of this method for determining electrocatalyst Tafel slopes.

Agbo, Peter↗

Ultrafast renormalization of the magnetic continuum in the proximal Kitaev quantum spin liquid H 3 LiIr 2 O 6 by tr-RIXS [Invited]

We present the first circularly polarized non-resonant pump time-resolved resonant inelastic X-ray scattering (tr-RIXS) experiment in H 3 LiIr 2 O 6 , an iridium-based Kitaev system. Our calculations and experimental results are consistent with the modification of the low-energy magnetic excitations in H 3 LiIr 2 O 6 only during illumination by the laser pulse. We discuss these results in a cooperative framework between the Floquet engineering of the exchange interactions and the dynamic renormalization of electron-electron correlations. However, the penetration length mismatch between the X-ray probe and laser pump and the intrinsic complexity of Kitaev magnets prevents us from unequivocally extracting towards which ground state H 3 LiIr 2 O 6 is driven. We outline possible solutions to these challenges for light-driven stabilization and observation of the Kitaev quantum spin liquid limit by RIXS.

Kim, Jungho [Argonne National Laboratory (ANL), Ar↗

Materials Data on CdAu by Materials Project

AuCd is alpha iridium vanadium-like structured and crystallizes in the trigonal P31m space group. The structure is three-dimensional. there are four inequivalent Au sites. In the first Au site, Au is bonded in a distorted body-centered cubic geometry to eight Cd atoms. There are a spread of Au–Cd bond distances ranging from 2.94–3.04 Å. In the second Au site, Au is bonded in a 8-coordinate geometry to eight Cd atoms. There are a spread of Au–Cd bond distances ranging from 2.87–3.03 Å. In the third Au site, Au is bonded in a 8-coordinate geometry to eight Cd atoms. There are a spread of Au–Cd bond distances ranging from 2.87–3.08 Å. In the fourth Au site, Au is bonded in a 8-coordinate geometry to eight Cd atoms. There are a spread of Au–Cd bond distances ranging from 2.92–3.10 Å. There are four inequivalent Cd sites. In the first Cd site, Cd is bonded in a distorted body-centered cubic geometry to eight Au atoms. In the second Cd site, Cd is bonded in a 8-coordinate geometry to eight Au atoms. In the third Cd site, Cd is bonded in a distorted body-centered cubic geometry to eight Au atoms. In the fourth Cd site, Cd is bonded in a 8-coordinate geometry to eight Au atoms.

36 MATERIALS SCIENCE↗

Materials Data on K3Ir(NO2)6 by Materials Project

KIr(K(NO2)3)2 crystallizes in the cubic Fm-3m space group. The structure is three-dimensional and consists of four iridium molecules, four potassium molecules, and one K(NO2)3 framework. In the K(NO2)3 framework, K1+ is bonded in a distorted q4 geometry to twelve equivalent O2- atoms. All K–O bond lengths are 2.69 Å. N3+ is bonded in a rectangular see-saw-like geometry to four equivalent O2- atoms. All N–O bond lengths are 2.14 Å. O2- is bonded in a 5-coordinate geometry to two equivalent K1+, two equivalent N3+, and one O2- atom. The O–O bond length is 1.32 Å.

36 MATERIALS SCIENCE↗

Materials Data on Tl3Ir(NO2)6 by Materials Project

IrTl(Tl(NO2)3)2 crystallizes in the cubic Fm-3m space group. The structure is three-dimensional and consists of four iridium molecules, four thallium molecules, and one Tl(NO2)3 framework. In the Tl(NO2)3 framework, Tl+1.67+ is bonded in a distorted q4 geometry to twelve equivalent O2- atoms. All Tl–O bond lengths are 2.77 Å. N+2.33+ is bonded in a distorted square co-planar geometry to four equivalent O2- atoms. All N–O bond lengths are 2.24 Å. O2- is bonded in a 5-coordinate geometry to two equivalent Tl+1.67+, two equivalent N+2.33+, and one O2- atom. The O–O bond length is 1.31 Å.

36 MATERIALS SCIENCE↗

Materials Data on Rb3Ir(NO2)6 by Materials Project

Rb(RbO6)2Ir(N2)3 crystallizes in the cubic Fm-3m space group. The structure is three-dimensional and consists of twenty-four ammonia molecules, four iridium molecules, four rubidium molecules, and one RbO6 framework. In the RbO6 framework, Rb1+ is bonded in a distorted q4 geometry to twelve equivalent O2- atoms. All Rb–O bond lengths are 2.90 Å. O2- is bonded in a 3-coordinate geometry to two equivalent Rb1+ and one O2- atom. The O–O bond length is 1.29 Å.

36 MATERIALS SCIENCE↗

Materials Data on Na3Ir(NO2)6 by Materials Project

Ir(Na(NO2)2)3 crystallizes in the trigonal R-3m space group. The structure is three-dimensional and consists of three iridium molecules and one Na(NO2)2 framework. In the Na(NO2)2 framework, there are two inequivalent Na1+ sites. In the first Na1+ site, Na1+ is bonded to six O2- atoms to form a mixture of corner and face-sharing NaO6 octahedra. There are three shorter (2.36 Å) and three longer (2.40 Å) Na–O bond lengths. In the second Na1+ site, Na1+ is bonded to twelve O2- atoms to form a mixture of corner and face-sharing NaO12 cuboctahedra. The corner-sharing octahedral tilt angles are 45°. There are six shorter (2.66 Å) and six longer (2.95 Å) Na–O bond lengths. N3+ is bonded in a bent 120 degrees geometry to two O2- atoms. Both N–O bond lengths are 1.25 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 3-coordinate geometry to two Na1+ and one N3+ atom. In the second O2- site, O2- is bonded in a 2-coordinate geometry to two Na1+ and one N3+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Si2Bi14IrI12 by Materials Project

Ir(SiBi7I6)2 crystallizes in the tetragonal P4/mcc space group. The structure is two-dimensional and consists of two iridium molecules and two SiBi7I6 sheets oriented in the (0, 0, 1) direction. In each SiBi7I6 sheet, Si4- is bonded in a 4-coordinate geometry to four equivalent Bi+1.14+ atoms. All Si–Bi bond lengths are 2.91 Å. There are three inequivalent Bi+1.14+ sites. In the first Bi+1.14+ site, Bi+1.14+ is bonded in a distorted water-like geometry to one Si4- and one I1- atom. The Bi–I bond length is 3.70 Å. In the second Bi+1.14+ site, Bi+1.14+ is bonded in a square co-planar geometry to four equivalent I1- atoms. All Bi–I bond lengths are 3.25 Å. In the third Bi+1.14+ site, Bi+1.14+ is bonded in a square co-planar geometry to four I1- atoms. There are a spread of Bi–I bond distances ranging from 3.17–3.30 Å. There are two inequivalent I1- sites. In the first I1- site, I1- is bonded in a 2-coordinate geometry to two equivalent Bi+1.14+ atoms. In the second I1- site, I1- is bonded in a 3-coordinate geometry to three Bi+1.14+ atoms.

36 MATERIALS SCIENCE↗