SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The relationships between hole mobility and grain boundary density were studied. Mobility was measured using the van der Pauw technique, and grain boundary density was measured using a quantitative microscopy technique. Mobility was found to decrease with increasing grain boundary density.
The paper develops a numerical model for calculating thermal accommodation coefficients alpha sub T and trapping functions f sub t for gases incident on solid surfaces. The method is especially designed for astrophysical applications in that it treats economically and with moderate accuracy (+ or - 20%) the dependences of alpha sub T and f sub t on finite and different surface and gas temperatures for a large number of gas-surface combinations. In particular, the method is applied to the astrophysical combinations of hydrogen and helium gases incident on graphite, silicon, and ice surfaces. Graphs are presented of the dependence of alpha sub T and f sub t on interstellar gas temperatures in the range of 10 to 10,000 K and grain temperatures in the range 10 to 1000 K, assuming the current estimates of the gas-surface physical parameters such as the composition and the Debye temperature of the grain material, the repulsive range of the surface potential, and the gas-grain adsorption energy.
The internal microstructure and growth kinetics of Al2O3 scales on Ni-15Cr-13Al (wt percent) are investigated by TEM and analyzed in relation to models of diffusivity. Polished arc-melted specimens were oxidized in 1-atm air at 1100 C for 0.1, 1.0, and 20 hours and ion-thinned for TEM at 100 kV. The frequency distribution of void size and grain size is determined for different oxidation times and scale depths. The kinetics of microvoid growth and of grain and scale growth are plotted and related via simplified models to lattice and grain-boundary oxygen diffusivity, respectively. Good agreement is found between model predictions and data obtained by Oishi and Kingery (1960) on oxygen diffusion in bulk Al2O3. The further implications and limitations of these findings are discssed.
The molecular composition of interstellar grain mantles was calculated employing gas phase and grain surface reactions. The calculated mixtures consist mainly of H2O, H2CO, N2, CO, O2, CO2, H2O2, NH3, and their deuterated counterparts in varying ratios. The exact compositions depend strongly on the physical conditions in the gas phase. The calculated mixtures were compared to the observations by using laboratory spectra of grain mantle analogs. The two agree reasonably except for the strength of the 6.8 micron band.
The development of two high Reynolds number wind tunnels at NASA Langley Research Center which operate at cryogenic temperatures with high dynamic pressures has imposed severe requirements on materials for model construction. Existing commercial high strength steels lack sufficient toughness to permit their safe use at temperatures approaching that of liquid nitrogen (-320 F). Therefore, a program to improve the cryogenic toughness of commercial high strength steels was conducted. Significant improvement in the cryogenic toughness of commercial high strength martensitic and maraging steels was demonstrated through the use of grain refining heat treatments. Charpy impact strength at -320 F was increased by 50 to 180 percent for the various alloys without significant loss in tensile strength. The grain sizes of the 9 percent Ni-Co alloys and 200 grade maraging steels were reduced to 1/10 of the original size or smaller, with the added benefit of improved machinability. This grain refining technique should permit these alloys with ultimate strengths of 220 to 270 ksi to receive consideration for cryogenic service.
The plausibility of relatively pure diatomic oxide crystals forming in the expanding atmospheres of cool stars is commented on, and the likelihood of SiO grains condensing is discussed on the basis of laboratory nucleation experiments. Results of annealing experiments are used to consider the further evolution of silicon oxide and silicate grains. The evidence shows that SiO solids form only when SiO condenses directly onto surfaces, and that the probability of pure crystalline SiO grains forming is rather small.
The effective grain size of a material on a planetary surface affects the strength of absorption features observed in the reflectance of a particulate surface. In the case of a planetary surface containing volatile ices, the absorption characteristics can change in connection with processes leading to a change in the grain size of the material. The present investigation is concerned with an evaluation regarding the occurrence of such processes and the implications for remote sensing applications. It is found that quantitative modeling of the kinetics of grain growth and destruction by thermal and nonthermal processes can provide a means to reconcile apparent optical paths in the volatile portions of planetary surfaces with the physical history of those surfaces. Attention is also given to conditions in the case of the Pluto/Triton system, Uranus and Saturnian satellites, and the Galilean system.
Metal particles in Guarena (H6), Colby (L6) and St. Severin (LL6) were studied by optical microscopy and by electron microprobe analysis. Observations from successive polished sections through the metal particles show that kamacite and taenite grains, which often appear to be isolated particles, are connected directly or by intervening sulfides. Also tetrataenite rims are widest when adjacent to sulfide or kamacite. These observations indicate that transfer of Ni during cooling when kamacite-taenite phase growth takes place does not occur through the silicate phases but proceeds through metal and sulfide phases or along grain boundaries. By utilizing the central Ni content of taenite grains from successive sections, metallographic cooling rates were determined more precisely than by using one arbitrary section. Cooling rates determined in this manner for Guarena, Colby, and St. Severin are 4.3 K, 4.0 K, and 1.0 K per million years, respectively.
Auger electron spectroscopy in conjunction with X-ray powder diffraction and scanning electron microscopy is used to analyze the grain-boundary phases of Y2O3- and CeO2-doped Si3N4 hot-pressed materials in order to demonstrate that the additives concentrate predominantly in the grain boundaries of Si3N4 in the form of various oxynitride phases. A high oxygen content observed in sample fracture surfaces was found to be consistent with the existence of an oxygen-enriched phase in the grain boundaries. The presence of yttrium and cerium in the fracture surfaces and an overall increase in the O/N ratio imply that the additive oxides are predominantly concentrated in the intergranular phases.
For models of planetary accumulation in the presence of solar nebular gas, the initial surface temperature of the earth is controlled by the grain opacity of the atmosphere. The surface temperature in turn controls the quantity of neon dissolved and trapped within the interior of the earth. To compare accumulation theory with observation, calculations have been made of the grain opacity expected to be associated with accumulation in a gaseous nebula. There are two parameters that are in principle determined by the theory, but actually are at present uncertain: the mean eccentricity(e) of the planetesimal swarm, and the fraction (xi) of the accretional energy that is expended in the release of grains into the atmosphere by ablation of the incoming planetesimal. It is found that if e is low (0.001), rather low values of xi (0.00001) are required to match the observed neon data. In contrast higher values of xi (0.1) are required for the most probable case with e = 0.01. For the high-eccentricity case (e = 0.1), xi must be greater than 0.01. The results show that avoidance of excess trapped neon of solar composition places restrictive, but not necessarily impossible, conditions on the parameters of the accumulation theory.
Fine-grained, opaque, silicate-rich matrix material, occurring as rims on chondrules and clasts, discrete clasts, and between chondrule and mineral fragments is a primitive component of chondrites and may resemble the material from which chondrules formed. To elucidate the relationship between chondrules and matrix and to help identify chondrule precursor material, the nimeralogy and bulk compositions of 30 mm-sized, fine-grained objects in Tieschitz (h3.6), Sharps (H3.4), Allan Hills A77299 (H3.7), Yamato 74191 (L3.6), Semarkona (LL3.0), and St. Mary's Co. (LL3.3) were studied. All are composed of submicron to micron sized material and may contain larger mineral fragments. Three texturally and mineralogically distinct types of objects were identified; all are minor components of the chondrites studied ( 1% except Sharps where melt-breccia-textured objects are approximately minus 1%). Bulk compositions of network and melt-breccia-textured objects define a rather narrow trend on a plot of Si/Al vs. Mg/Al, emphasizing a possible genetic relationship. Data show that Si/Mg is higher for network and melt-breccia-textured objects than for porphyritic and barred olivine chondrules. Melting in vaccuo of network-textured objects would cause a loss of Si relative to Mg (3), suggesting that material compositionally similar to fine grained objects could have been precursors to some chondrules.
Solar wind and cosmic and cosmic ray irradiation of grains induces physical and chemical effects including their erosion and the synthesis of molecular compounds within the implanted layers. The experiments performed with H2O ice implanted by keV ions are presented. The ion implantation is intended to simulate the irradiation of comets, ring grains, and satellites of outer planets, either by the primitive solar particles or by contemporary solar wind (SW) or solar cosmic rays (SCR) fluxes. The detection of molecules was obtained through in-situ infrared spectroscopy. A model is proposed for the formation of organic matter within icy solar system bodies which is in agreement with experimental results of erosion rates. The organic molecules, frozen-in within the icy mantles of the grains present in the protosolar nebula, would originate from their primitive irradiation. Such an irradiation would have taken place during an early stage of the proto-sun, when both the SW and SCR particles were more intense by orders of magnitude.
To derive the abundances of minerals in a surface composed of more then one mineral in an intimate mixture, the bidirectional reflectance spectrum must be measured at several angles of incidence and emission. From these measurements, the scattering parameters may be derived, and the effective single scattering albedo can be computed from the models. If the scattering parameters are not derived, and the particles scatter anisotropically, then the computed effective single scattering albedo has been computed, the solution to the model is a nonlinear least squares problem with three unknowns per particle type. The solution is feasible when the complex indices of refraction and the densities of each mineral component are known. The unknowns are: the grain size of each particle type, the mass fraction of each particle type, and a grain internal scattering coefficient that describes grain imperfections.
Coarse-grained rims composed of olivine, with or without low-Ca pyroxene, occur around all types of chondrules and compound chondrules in type 3 carbonaceous chondrites and around ordinary chondrites. The dark zoned chondrules and coarse grained rims were formed by the heating of clumps of opaque matrix material to subsolidus-subliquidus temperatures in the solar nebula. The most likely source of the heat that formed the coarse grained rims is the mechanism responsible for chondrule formation. CV chondrites may have formed in a region where the chondrule formation mechanism was less efficient, probably at greater solar distances than the ordinary chondrites. Alternatively, CV chondrules may have suffered fewer particle collisions prior to agglomeration.
The growth and evolution of grains in the protostellar nebula are investigated within the context of turbulent low-mass disk models developed by previous investigators. Because of grain collisions promoted by the turbulent velocities, particles aggregate to millimeter size in times of the order of 1000 yrs. During the growth the particles acquire a large inward radial velocity due to gas drag (Weidenschilling, 1977) and spiral into the sun. The calculations indicate that the final size of the particles does not exceed a few centimeters. This result is not very sensitive to the specific nebula parameters. For all conditions investigated it seems impossible to grow meter- or kilometer-sized bodies that could decouple from the gas motion. An additional argument is given that shows that only particles smaller than centimeter size can survive drift into the growing sun by being transported radially outward by turbulent mixing. This agrees well with the maximum size of inclusions and chondrules. Since sedimentation of grains and subsequent dust disk instability is effectively inhibited by turbulent stirring, the formation of planetesimals and planets cannot be explained in the above scenario without further assumptions.
The Comet IRAS-Araki-Alcock was observed with the VLA at 6 and 2 cm, when the comet was at geocentric distances of 0.08 and 0.035 AU, respectively, and the results are discussed. The three sigma upper limits to the flux density are 90 and 750 micro-Jy at the two wavelengths, respectively, values fully two orders of magnitude below the flux densities predicted by the icy-grain halo theory as initially developed. The corrected theory also indicates that the icy grain halo theory does not give an adequate description of the cometary environment. It is shown that the halo is either very optically thin, with a filling factor of the order of 10 to the -5th, or that the maximum size of the grain that can be lifted off the nuclear surface is only of the order of 10-100 microns.
Ultrasonic attenuation as function of frequency determined for metal sample having known mean grain diameter. Once function determined for one sample of material, scaled to determine mean grain size of other samples of materials. Results suggest ultrasonic approach viable for verifying effects of heat treatments that vary grain size. Uses of this technology include nondestructive ultrasonic verification size heat treatments and other online inspection systems.
Dust grains occur throughout the universe in many systems such as protostellar dust clouds, planetary ring structures and in a near earth environment as the result of man's activities. These grains interact with the local plasma and radiation environment and this interaction certainly influences the evolution of the dust grains. The interaction of bismuth dust particles were studied with a background plasma.