Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRAPHITIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Effective Strategy for Improving Electrocatalyst Durability by Adhesive Immobilization of Catalyst Nanoparticles on Graphitic Carbon Supports

We have found that Ta-based additive films in our catalyst system act as adhesives, which improves electrocatalyst durability by immobilizing the catalyst Pt NPs on the graphitic Vulcan carbon support. Furthermore, we suggest that this can be a general design principle in producing higher-durability electrocatalysts on graphitic supports. By electrochemically probing the contributing roles of the tantalum oxide (Ta 2 O 5 ) and the polyphosphate (PPA) components in separate samples, we show that these combine to produce the observed improvement in activity and durability of our best catalyst, the tantalum polyphosphate (TaOPO 4 )-treated sample. To control variables for a valid electrochemical comparison, such as dissimilar catalyst particle size distributions and variations in surface coverage, four new catalyst samples closely matched in every way were prepared: (1) Pt/VC, (2) Pt/[PPA/VC], (3) Pt/[Ta 2 O 5 /VC], and (4) Pt[TaOPO 4 /VC]. We present HR-TEM/HAADF-STEM, EDS elemental mapping, PXRD, XPS, and electrochemical activity and durability evidence, showing that the TaOPO4 and Ta2O5 additives act as adhesives, effectively tethering the NPs to the VC graphitic support surface. Pt/[Ta 2 O 5 /VC] exhibited 3× better durability as compared with the Pt/VC control because of better catalyst nanoparticle immobilization by the Ta 2 O 5 adhesive. Pt[TaOPO 4 /VC] is the overall best performer, exhibiting both a high MA of 0.82 A mg Pt –1, the highest ORR MA after heat treatment, as well as 1.75× greater durability over the Pt/VC control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphite-Conjugated Pyrazines as Molecularly Tunable Heterogeneous Electrocatalysts

Condensation of ortho-phenylenediamine derivatives with ortho-quinone moieties at edge planes of graphitic carbon generates graphite-conjugated pyrazines (GCPs) that are active for oxygen reduction electrocatalysis in alkaline aqueous electrolyte. Catalytic rates of oxygen reduction are positively correlated with the electrophilicity of the active site pyrazine unit and can be tuned by over 70-fold by appending electron-withdrawing substituents to the phenylenediamine precursors. Discrete molecular analogs containing pyrazine moieties display no activity above background under identical conditions. This simple bottom up method for constructing molecularly well-defined active sites on ubiquitous graphitic solids enables here the rational design of tunable heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of hydrogen adsorption properties in expanded graphite models and in nanoporous carbon

We present an efficient and accurate approach to investigate the adsorption of hydrogen molecules between graphite layers and in nanoporous carbons at room temperature and moderate pressures. The approach accurately reproduces previous, more computationally intensive, calculations on a model of expanded graphite. The theoretical hydrogen uptake in low density nanoporous carbons is calculated to be close to 0.5 wt% at 298K and 5 MPa. The isosteric heats of adsorption are predicted to be between 12 to 18 kJ/mol, for both the expanded graphite model and in model structures of nanoporous carbon. This is close to the adsorption energy range suitable for hydrogen storage.

Peng, L.↗

Atomic intercalation to measure adhesion of graphene on graphite

The interest in mechanical properties of layered and 2D materials has reemerged in light of device concepts that take advantage of flexing, adhesion and friction in such systems. Here we provide an effective measurement of the nanoscale elastic adhesion of a graphene sheet atop highly ordered pyrolytic graphite (HOPG) based on the analysis of atomic intercalates in graphite. Atomic intercalation is carried out using conventional ion sputtering, creating blisters in the top-most layer of the HOPG surface. Scanning tunneling microscopy coupled with image analysis and density functional theory are used to reconstruct the atomic positions and the strain map within the deformed graphene sheet, as well as to demonstrate subsurface diffusion of the ions creating such blisters. To estimate the adhesion energy we invoke an analytical model originally devised for macroscopic deformations of graphene. This model yields a value of 0.221 ± 0.011 J/m -2 for the adhesion energy of graphite, which is in surprisingly good agreement with reported experimental and theoretical values. This implies that macroscopic mechanical properties of graphene scale down to at least a few nanometers length. The simplicity of our method, compared to the macroscale characterization, enables analysis of elastic mechanical properties in two-dimensional layered materials and provides a unique opportunity to investigate the local variability of mechanical properties on the nanoscale.

36 MATERIALS SCIENCE↗

Abiotic synthesis of graphite in hydrothermal vents

Deciphering the origin, age, and composition of deep marine organic carbon remains a challenge in understanding the dynamics of the marine carbon cycle. In particular, the composition of aged organic carbon and what allows its persistence in the deep ocean and in sediment is unresolved. Here, we observe that both high and low temperature hydrothermal vents at the 9° 50' N; 104° 17.5W East Pacific Rise (EPR) vent field are a source for (sub) micron-sized graphite particles. We demonstrate that commonly applied analytical techniques for quantification of organic carbon detect graphite. These analyses thereby classify graphite as either dissolved or particulate organic carbon, depending on the particle size and filtration method, and overlook its relevance as a carbon source to the deep ocean. Settling velocity calculations indicate the potential for these (sub)micron particles to become entrained in the buoyant plume and distributed far from the vent fields. Furthermore, our observations provide direct evidence for hydrothermal vents acting as a source of old carbon to the deep ocean.

58 GEOSCIENCES↗

Multiscale dynamics of charging and plating in graphite electrodes coupling operando microscopy and phase-field modelling

The phase separation dynamics in graphitic anodes significantly affects lithium plating propensity, which is the major degradation mechanism that impairs the safety and fast charge capabilities of automotive lithium-ion batteries. In this study, we present comprehensive investigation employing operando high-resolution optical microscopy combined with non-equilibrium thermodynamics implemented in a multi-dimensional (1D+1D to 3D) phase-field modeling framework to reveal the rate-dependent spatial dynamics of phase separation and plating in graphite electrodes. Here we visualize and provide mechanistic understanding of the multistage phase separation, plating, inter/intra-particle lithium exchange and plated lithium back-intercalation phenomena. A strong dependence of intra-particle lithiation heterogeneity on the particle size, shape, orientation, surface condition and C-rate at the particle level is observed, which leads to early onset of plating spatially resolved by a 3D image-based phase-field model. Moreover, we highlight the distinct relaxation processes at different state-of-charges (SOCs), wherein thermodynamically unstable graphite particles undergo a drastic intra-particle lithium redistribution and inter-particle lithium exchange at intermediate SOCs, whereas the electrode equilibrates much slower at low and high SOCs. These physics-based insights into the distinct SOC-dependent relaxation efficiency provide new perspective towards developing advanced fast charge protocols to suppress plating and shorten the constant voltage regime.

25 ENERGY STORAGE↗

Investigating the effect of screen-printed structured graphite electrodes with low tortuosity for high-capacity and fast-charging lithium-ion batteries

A flexible screen-printed graphite electrode was fabricated as an anode for developing fast-charging lithium-ion batteries with low tortuosity. A homogenous anode ink was prepared by mixing graphite as the active material, carbon black (C45) as the conductive additive, and polyvinylidene fluoride (PVDF) as the binder in N-Methyl-2-pyrrolidone (NMP) solvent. The ink was deposited on a flexible copper foil via a stainless-steel screen consisting of an array of pores, that act as secondary pore networks (SPNs), using the screen-printing process. Lithium-ion battery half-cells were assembled using the printed graphite anode, lithium metal foil as the counter electrode, and 1.2 M lithium hexafluorophosphate (LiPF 6 ) in ethyl carbonate: ethyl methyl carbonate (EC: EMC = 3:7) as the electrolyte. The effect of SPNs on the cell performance was investigated by performing formation, rate and cycling tests on the assembled cells, at different C-rates. It was observed that the cells consisting of SPNs with a pore size of 100 μm and edge-to-edge distance of 100 μm between the pores exhibited significantly higher specific capacities of 168 and 129 mAh/g when compared to reference cells without SPNs, which had capacities of 120 and 85 mAh/g, at high C-rates of 4 C and 6 C, respectively. The cells with SPNs also demonstrated excellent cycling performance with ~ 95% capacity retention after 100 cycles at 2 C.

Fast charging lithium-ion battery↗

Understanding the nature of “superhard graphite”

Numerous experiments showed that on cold compression graphite transforms into a new superhard and transparent allotrope. Several structures with different topologies have been proposed for this phase. While experimental data are compatible with most of these models, the only way to solve this puzzle is to find which structure is kinetically easiest to form. Using state-of-the-art molecular-dynamics transition path sampling simulations, we investigate kinetic pathways of the pressure-induced transformation of graphite to various superhard candidate structures. Unlike hitherto applied methods for elucidating nature of superhard graphite, transition path sampling realistically models nucleation events necessary for physically meaningful transformation kinetics. We demonstrate that nucleation mechanism and kinetics lead to M-carbon as the final product. W-carbon, initially competitor to M-carbon, is ruled out by phase growth. Bct-C 4 structure is not expected to be produced by cold compression due to less probable nucleation and higher barrier of formation.

58 GEOSCIENCES↗

Low-temperature exfoliation of multilayer-graphene material from FeCl 3 and CH 3 NO 2 co-intercalated graphite compound

Graphene materials derived through the exfoliation of graphite are always accompanied with high population of defects and/or surface functionalities due to the harsh conditions utilized in the synthesis. We describe herein a scalable approach for the preparation of high quality graphene materials via low-temperature exfoliation of graphite under mild chemical conditions. The microwave induced rapid decomposition of nitromethane at low temperature produces mechanical force that lifts up the graphene sheets from the FeCl 3 and CH 3 NO 2 co-intercalated graphite compound without creating defects and functional groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon nanomaterial produced by microwave exfoliation of graphite oxide: new insights.

We present detailed characterization of graphene-like material obtained through microwave stimulated exfoliation of graphite oxide (GO). Properties of this material were studied by multiple techniques including, among others, X-ray photoelectron spectroscopy, mass-spectroscopy, infrared and Raman spectroscopy, scanning electron microscopy and broadband dielectric spectroscopy. Specific surface area and volume of microwave exfoliated graphite oxide reached 600 m2 g1 and 6 cm3 g1, respectively. It is shown that during such an explosive reduction process the sample emits CO2, CO and H2O and, in some cases, SO2 gases. The resulting reduced material exhibits IR spectra similar to that of graphite and a dc-conductivity of 0.12 S cm1.

Shulga, Y. M.↗

DFT simulation of the X-ray diffraction pattern of aluminum-ion-intercalated graphite used as the cathode material of the aluminum-ion battery

Many breakthroughs have been achieved in rechargeable aluminum-ion battery technologies in recent years. Most recently, operando X-ray diffraction (XRD) combined with density functional theory (DFT) calculations was reported to study the chloroaluminate anion (AlCl 4 -)-intercalated graphite cathode of the battery. However, there are quite a few discrepancies between the measured and simulated XRD patterns. This work is focused on the simulation of XRD patterns of graphite intercalation compounds (GICs) with DFT calculations. Our results reveal that both the geometry of AlCl 4 - in graphite and the gallery height of GICs are dependent on the intercalant density. At low intercalant density, the gallery height keeps constant, but at high intercalant densities, the gallery height is linearly related to the intercalant density. Our simulated XRD patterns are highly consistent with the measured operando XRD patterns. Not only do the angles of the peaks match very well, but also the relative intensities and the corresponding electrode capacities show reasonable agreement with the experimental results. The DFT simulation of the XRD pattern provides significant information on the stage index and the charge capacity of the GIC electrode.

25 ENERGY STORAGE↗

Pursuing graphite-based K-ion O 2 batteries: a lesson from Li-ion batteries

The replacement of lithium metal by lithium intercalated graphite was crucial for developing safe lithium-ion batteries. Superoxide-based potassium–oxygen batteries represent an exciting metal–oxygen battery with the highest energy efficiencies. However, using potassium metal is a more serious safety threat than lithium. Herein, we explore the possibility of graphite-intercalation anodes for potassium-ion oxygen batteries (PIOBs) with enhanced safety. This work demonstrates for the first time that establishing an artificial potassium salt-rich solid electrolyte interphase (SEI) enables a reversible graphite-intercalation anode (249.6 mA h g -1 after 600 cycles) in a potassium bis(trifluoromethanesulfonyl)imide (KTFSI)-based localized high-concentration electrolyte. Such an electrolyte is stable with the superoxide cathode. The PIOB delivers energy efficiencies above 90% at a depth of discharge (DOD) of 25% for 80 cycles. A three-electrode measurement shows that its overpotential mainly comes from the anode. The lifespan is limited to the gradual degradation of the artificial SEI caused by oxygen crossover. This work represents a step towards achieving holistic anode–electrolyte–cathode compatibility in a PIOB and its realistic evaluation under a controlled DOD.

25 ENERGY STORAGE↗

Magnetic states of atomic vacancies in graphite probed by scanning tunneling microscopy

Intrinsic defects in graphitic materials, like vacancies and edges, have been expected to possess magnetic states from the many-body interaction of localized electrons. However, charge screening from graphite bulk carriers significantly reduces the localization effect and hinders the observation of those magnetic states. Here, we use an ultra-low-temperature scanning tunneling microscope with a high magnetic field to observe the magnetic states of atomic vacancies in graphite generated by ion sputtering. Scanning tunneling spectroscopy reveals localized states at the vacancies, which exhibit splitting at a certain magnetic field whose separation increases with the field strength. The transition is well described by the “Anderson model,” which describes the emergence of localized magnetic states inside the metallic reservoir through electron–electron interaction. The interaction strength is estimated to be between 1 meV and 3 meV, which is supported by the density functional theory calculation. The observation provides an important foundation for application of intrinsic defects to carbon-based spintronic devices.

36 MATERIALS SCIENCE↗

Mechanisms of graphite ablation by sub-millisecond ytterbium fiber laser pulses

Graphite is a key material in a variety of cross-cutting applications in energy conversion, energy storage, and nuclear energy. Recently, temporally modulated continuous wave lasers have been shown to produce well-defined ablation features in graphite at relatively high processing speeds. In this work, we analyze in detail the laser ablation dynamics of single-pulse ablation in the sub-millisecond time regime to elucidate the origins of the resulting well-defined ablation craters using a combination of time-resolved emission imaging, diffuse reflection/scattering imaging, and optical emission spectroscopy. These multimodal in situ diagnostics revealed three main contributors to achieve well-defined ablation features: (1) rapid ejection of particles with ~100 m/s speed, (2) ablation of the graphite in the gaseous form, and (3) absence of bulk liquid motion, which is typically observed in laser processing of metals. Plasma plume formation was sustained throughout the duration of the laser pulse (500 μs). Here, this work provides insights into the complex physical and chemical mechanisms of sub-millisecond laser–matter interactions, which are critical for parameter space optimization and tailoring of laser machining and drilling processes.

42 ENGINEERING↗

Molecular dynamics study on the interfacial properties of mixtures of monomers of polyvinylpyrrolidone (PVP)-based battery binders on graphene and graphite surfaces

This study investigates the behavior of two different mixtures of monomers of polyvinylpyrrolidone (PVP)-based battery binders, polyvinylpyrrolidone:polyvinylidene difluoride (PVP:PVDF) and polyvinylpyrrolidone:polyacrylic acid (PVP:PAA), at graphene and graphite interfaces using classical molecular dynamics simulations. The aim is to identify the best performing monomer binder blend and carbon-based material for the design of battery-optimized energy devices. The PVP:PAA monomer binder blend and graphite are found to have the best interaction energies, densification upon adsorption, and more ordered structure. The adsorption of both monomer binder blends is strongly guided by the higher affinity of PVP and PAA monomeric molecules for the surfaces compared to PVDF. The structure of adsorbed layers of PVP:PVDF monomer binder blend on graphene and graphite develops more quickly than PVP:PAA, indicating faster kinetics. This study complements a previous density functional theory study recently reported by our group and contributes to a better understanding of the nanoscopic features of relevant interfacial regions involving mixtures of monomers of PVP-based battery binders and different carbon-based materials. In conclusion, the effect of a blend of commonly used monomer binders on carbon-based materials is essential for obtaining tightly bound anode and cathode active materials in lithium-ion batteries, which is crucial for designing battery-optimized energy devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computer simulation of carbonization and graphitization of coal

Abstract This study describes computer simulations of carbonization and graphite formation, including the effects of hydrogen, nitrogen, oxygen, and sulfur. We introduce a novel technique to simulate carbonization, ‘Simulation of Thermal Emission of Atoms and Molecules (STEAM)’, designed to elucidate volatile outgassing and density variations in the intermediate material during carbonization. The investigation analyzes the functional groups that endure through high-temperature carbonization and examines the graphitization processes in carbon-rich materials containing non-carbon impurity elements. The physical, vibrational, and electronic attributes of impure amorphous graphite are analyzed, and the impact of nitrogen on electronic conduction is investigated.

Ugwumadu, C. (ORCID:0000000199207594)↗

High-pressure phase of cold-compressed bulk graphite and graphene nanoplatelets

Here, we have studied the high-pressure vibrational and structural behavior of bulk graphite and graphene nanoplatelets at room temperature by means of high-pressure Raman spectroscopic and x-ray diffraction probes. We have detected a clear pressure-induced structural transition in both materials, evidenced by the appearance of new Bragg peaks and Raman features, deviating from the starting hexagonal graphitic structure. The high-pressure phase is identified as a partially disordered orthorhombic structure, consisting of mixed sp 2 - and sp 3 -type bonding. Our experimental findings serve as direct evidence for the existence of a metastable transient modification in cold compressed carbon, lying between the sp 2 -type graphite and sp 3 -type diamond allotropes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of Graphite Materials for Fast-Charging Capabilities in Lithium-Ion Batteries

The application of lithium-ion batteries in electric vehicles calls for decreased cost, increased energy density, increased power density, as well as low-temperature and fast-charging capability. In regard to fast charging, it is generally understood that it is the kinetic overpotential at the graphite anode that limits the cycling rate in modern commercial battery formulations. Here, we study the fast-charging capabilities of a series of graphite samples from commercial suppliers, as part of a materials validation effort at Argonne National Laboratory. Lastly, we combine materials characterization data from the raw samples with electrochemical characterization of graphite laminate electrodes in full-cell configuration to explore the causes of differences in rate performance and its impact on cycle life.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗