Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Formation factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Corrosion of Zinc Cold Spray Coatings in a Wet Sweet and Sour Gas Environment

Internal corrosion is a problem for steel pipelines transporting natural gas or CO 2 containing water and partial pressures of H 2 S higher than 0.3 kPa (0.05 psi). This work aims to mitigate internal corrosion in steel pipelines transporting natural gas containing H 2 S using cold spray coatings. Two types of the cold spray binary metallic coatings (zinc chromium [ZnCr]. zinc niobium [ZnNb]) were studied using electrochemical techniques: potentiodynamic polarization, linear polarization resistance, and electrochemical impedance spectroscopy. The corrosion resistance of cold spray coatings (ZnCr, ZnNb) was evaluated in an environment containing 4 bar CO 2 pressure, simulating the partial pressures found in gas transmission lines over a solution of 3.5 wt% NaCl heated to 40°C. A concentration of 0.003 M Na 2 S 2 O 3 ·5H 2 O, corresponding to H 2 S partial pressures around 0.079 bar (1.146 psi), was used to simulate sour conditions. Postcorrosion surface characterization was performed using a scanning electron microscope (SEM) equipped with an energy-dispersive x-ray spectroscope (EDS) and x-ray diffraction analysis. The data showed that the presence of 0.003 M Na 2 S 2 O 3 ·5H 2 O shifted the corrosion potential to more anodic values and decreased the corrosion current density. Both coatings showed similar behavior after 1 h of exposure in the CO 2 /H 2 S environment, indicating that similar electrochemical reactions were occurring on ZnNb and ZnCr. SEM images and EDS surface analyses for specimens showed a significant change in the surface chemical composition of carbon steel coated with ZnNb and ZnCr after 24 h of immersion. In the presence of thiosulfate (under sour conditions), the formation of corrosion product layers (ZnCO 3 and ZnS) on top of ZnNb and ZnCr coatings increased their corrosion resistance, which helped to reduce their corrosion by a factor of 2. Under a sweet environment, the corrosion rates for steel coated with cold spray coatings after 14 d of exposure are lower than that for galvanized steel by a factor of 5 due to the ZnCO 3 layer formed on top of the coatings. The ZnCO 3 layer formed on the steel surface acts as a physical barrier against corrosion by blocking the diffusion of corrosive species to the surface. No localized attack was observed. ZnCr Cold spray coating with defect showed promising corrosion protection against CO 2 corrosion (sweet corrosion) after 14 d of exposure to a CO 2 environment. Here, the scratch on the coating simulated damage created in service, and it was deep enough to expose the substrate material (steel). The formation of zinc oxide (ZnO) and zinc carbonate (ZnCO 3 ) on the scratch confirmed the cathodic protection of the steel by ZnCr and ZnNb coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Microphase Separation of Randomly Linked Branched Polystyrene/Polylactic Acid for Formation of Cocontinuous Nanostructures

Cocontinuous polymeric nanomaterials have gained attention for their ability to preserve distinct properties of constituent microphases within a single material. Randomly linked copolymer networks have shown very wide stability windows for disordered cocontinuous phases (extending over ≈ 30 wt % in composition), but the reliance on a network architecture prevents subsequent solution- or melt-processing. Furthermore, the key factors contributing to cocontinuity have remained unclear. We recently found that randomly linked star copolymers (RSCs) can exhibit a cocontinuous window as wide as 25 wt % in the case of 4-arm stars, suggesting that while a network architecture is not essential for the formation of disordered cocontinuous phases, the presence of random elastic forces in such architectures may indeed facilitate their formation. In addition, the behavior was found to be highly sensitive to arm number, with 6-arm RSCs exhibiting almost no cocontinuous phase. These results raised a key mechanistic question regarding the contribution of random elastic forces, originating from strands that bridge between junctions, in stabilizing disordered cocontinuous phases. In the current study, we synthesized randomly linked branched copolymers (RBCs) of polystyrene (PS) and poly(D,L-lactic acid) (PLA), which represent an intermediate architecture between networks and stars. This approach allows for the introduction of elastic contributions from strands bridging between different junctions, while still maintaining the processability advantages of a non-network architecture. The cocontinuous regions of the PS/PLA RBCs, with varying polymer and linker functionalities (f p and f l , respectively), were characterized by small-angle X-ray scattering, gravimetry, and scanning electron microscopy. We found that the cocontinuous windows of RBCs typically expanded with increasing elastic contributions and exhibited reduced sensitivity to junction-functionality compared to RSCs. Notably, RBCs with f p = 1.50 and f l = 3, which had large molecular weights due to proximity to the gel point, achieved a cocontinuous window of ≈ 34 wt %, which is almost twice as wide as analogous 3-arm RSCs and comparable to randomly linked networks. Leveraging this robust cocontinuity and solution-processability, we fabricated a film of interconnected nanoporous PS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2002

Is Animal Age a Factor In the Response of Bone to Spaceflight?

The rodent bone response to spaceflight may be influenced by a multitude of actors including flight duration, strain, and housing. Review of bone formation rates during spaceflight suggests that age may also play a role in the response. Weanling rats show fewer bone changes than older rats. To determine if the long bones of weanling rats were insensitive to weight-bearing, a hindlimb unloading experiment was conducted simultaneously with a 9d shuttle flight in 34d old group-housed male rats. All animals were injected with bone markers 7d and 1d before flight and euthanized at landing, 24hr, and 72hr following recovery. If no differences in body weight, bone length, or bone formation at the tibiofibular junction were noted at the different time points, data were combined for each group. No significant differences in body weight were found at any time period among the groups. The humerus, tibia, and femur elongated significantly during the flight period with no difference in lengths between groups at the end of the flight period. The group-housed flight rats showed no change in cortical bone formation rate compared to preflight values, flight controls, or vivarium controls. However, the hindlimb unloading group showed a significant 30% decrease in bone formation rate compared to all other groups. Individually-housed 38d old animals flown for 14d showed approx. 10% suppression of cortical growth. We speculate that the mechanical threshold required for cross-sectional bone growth is reached in group-house weanling rats during spaceflight, perhaps, through physical interactions, and that the weanling animals are sensitive to loading. However, the threshold is not fully reached in either singly-housed flight or hindlimb unloaded weanling rats. Older singly-housed flight animals appear to show equal or greater bone changes compared to hindlimb unloaded rats. We conclude that age, flight duration, strain, and housing have important roles in rodent skeletal responses to spaceflight.

Morey-Holton, E. R.↗
DOE OSTI2021

The Second Data Release of the Survey of the MAgellanic Stellar History (SMASH)

The Large and Small Magellanic Clouds (LMC and SMC) are the largest satellite galaxies of the Milky Way and close enough to allow for a detailed exploration of their structure and formation history. The Survey of the MAgellanic Stellar History (SMASH) is a community Dark Energy Camera (DECam) survey of the Magellanic Clouds using ∼50 nights to sample over ∼2400 deg{sup 2} centered on the Clouds at ∼20% filling factor (but with contiguous coverage in the central regions) and to depths of ∼24th mag in ugriz. The primary goals of SMASH are to map out the extended stellar peripheries of the Clouds and uncover their complicated interaction and accretion history as well as to derive spatially resolved star formation histories of the central regions and create a “movie” of their past star formation. Here we announce the second SMASH public data release (DR2), which contains all 197 fully calibrated DECam fields including the main body fields in the central regions. The DR2 data are available through the Astro Data Lab hosted by the NSF’s National Optical-Infrared Astronomy Research Laboratory. We highlight three science cases that make use of the SMASH DR2 data and will be published in the future: (1) preliminary star formation histories of the LMC, (2) the search for Magellanic star clusters using citizen scientists, and, (3) photometric metallicities of Magellanic Cloud stars using the DECam u-band.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Improvement of screen-printable metallization paste for low-cost silicon solar cells utilizing silver coated copper powders

This aims of this project were to develop low-cost screen-printable Ag|Cu metallization, as alternative to Ag paste, for contacting PERC solar cells with transparent emitter for high performance and reliability. The intended goal was to achieve 81% fill factor with a screen-printable Ag|Cu paste alternative. This was attempted through a three strand approach including Ag|Cu formulation by SVMT, production using cavitation technology by ACI and contact formation through the understanding of (i) the liquid phase sintering of the nano/macro particles of Ag|Cu to achieve bulk metal with very low series resistance, (ii) optimization of contact firing to avoid penetration of Cu into the silicon bulk, and finally (iii) proper analysis to quantify the contributions of each resistance component and keep the total series resistance at 0.2 Ω-cm2, which would result in high fill factor of 81% by UNC Charlotte. The objectives also involved i) the implementation of glass frit with Cu metal that will etch through the ARC for low contact resistance and adhesion, ii) development of Ag|Cu pastes with the optimized glass frit, iii) investigation of the impact of Cu particle size, morphology and loading on the gridline resistance, iv) narrow gridline screen designs along with narrow gridline prints, v) development of fast belt speeds of up to 375 inches per minute (ipm) sintering, and vi) stability study on Ag|Cu contact to high performance and reliability.

14 SOLAR ENERGY↗
DOE OSTI2023

Recent Advances in Picochlorum renovo Strain Development

Microalgae are amongst the most efficient phototrophs for the reduction of CO2 to industrially relevant products and product intermediates. We have recently identified a novel species in the genus Picochlorum (Picochlorum renovo) that demonstrates high areal productivity (>30 g/m2/day), high temperature and salinity tolerances, and rapid growth rate (-2 hour doubling time): attributes essential for economically viable industrial scale deployment for low value commodities (e.g. fuel and chemical precursors). Following screening of >300 algal isolates to identify Picochlorum renovo, we developed baseline genetic tools necessary for genetic engineering of the nucleus and chloroplast, and further built upon these tools to establish a protein secretion system. We have also deployed genetic engineering tools to establish the utilization of phosphite as a selectable marker in the chloroplast and nuclear genomes, while concurrently acting as a potential crop protection strategy. We have further implemented these tools to enable the utilization of formate as a novel carbon source for phototroph cultivation. Explicitly, formate toxicity was assayed, followed by introduction of a formate dehydrogenase to allow formate utilization. Cultures supplemented with formate grew to a higher density when cultivated under ambient CO2, highlighting the potential for this strategy to increase growth. Additionally, we have established a synthetic transcription factor and core promoter system which lays the foundation for tunable, high expression engineering in the nuclear genome, and potentially can be applied for universal algal genetic engineering. Finally, current work has focused on direct photosynthetic production of chemicals, and generation of mutant libraries. Combined, our work has established a robust genetic toolbox for Picochlorum renovo, which we have deployed for strain development purposes to introduce biotechnologically relevant traits.

algae↗
DOE OSTI2024

Crack‐Free Single‐Crystalline LiNiO 2 for High Energy Density All‐Solid‐State Batteries

Abstract Single‐crystalline layered oxide (LiNi 1‐ x ‐ y Mn x Co y O 2 ) cathodes have been found to exhibit exceptional electrochemical properties when coupled with various inorganic solid electrolytes (ISEs) in all‐solid‐state batteries (ASSBs). Their advantages stem from the robust morphological integrity with the absence of grain boundaries and the high electrochemical oxidative stability. Here, ASSBs featuring single‐crystalline LiNiO 2 (LNO) with the highest Ni content are reported, offering a high theoretical specific capacity of 275 mAh g ‐1 alongside a high average discharge voltage (3.7 V vs Li + /Li). Through a careful investigation, it is demonstrated that micron‐sized single‐crystalline LNO (µSC‐LNO) composite cathodes with a halide ISE exhibit a high initial discharge capacity of 205 mAh g ‐1 with an outstanding cycle performance over 200 cycles in room‐temperature ASSBs. The significance of engineering parameters is emphasized, such as particle size and specific density, in promoting a homogeneous and fast Li + transport within the composite cathodes. Furthermore, the formation of undesirable interphase between the halide ISE in the cathode and sulfide ISE separator is elucidated, which may be a critical factor impeding long‐term cyclability of ASSBs. This work provides insights into the design of composite cathodes for high‐energy‐density ASSBs.

Chemistry↗
DOE OSTI2020

Geometry-independent microstructure optimization for electron beam powder bed fusion additive manufacturing

The ability to manipulate the formation of microstructure is one of the potential advantages of additive manufacturing. Yet, the additive manufacturing process is riddled with complex interactions between processing parameters, geometry, and spot melting sequence which makes the task of controlling microstructure challenging. This paper proposes a method to solve the microstructure texture optimization problem by leveraging established optimization techniques and increasingly fast and accurate analytical heat transfer models. Respectively, we apply two different optimization algorithms, genetic algorithm and concurrent greedy line search, in order to induce arbitrarily shaped microstructure regions and we use a heat transfer model to evaluate the fitness of solutions in an iterative approach that is far more efficient than pure trial and error. The objective of the optimization algorithm is to control local thermal conditions – hence microstructure formation – during the melting process by manipulating the order and the dwell time of all the points of the infill pattern sequence. We then analyze the optimized sequence to determine important path characteristics that affect the microstructure formation. Through examples, we show that relative order and frequency, as measured by weighted average and variance of spot order, are important factors that influence the final characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mechanistic understanding of support effect on the activity and selectivity of indium oxide catalysts for CO 2 hydrogenation

Herein we present a mechanistic study on the support effect (ZrO 2 and CeO 2 ) of In 2 O 3 catalysts in CO 2 hydrogenation by a combined experimental and computational approach. Kinetic experiments and surface characterization suggested that the activity of In 2 O 3 catalysts cannot be simply correlated with the abundance of surface oxygen vacancies (O v ) formed by either H 2 -reduction or thermal treatment, which has been frequently invoked in previous studies. The support effect should originate from the electronic interactions between In 2 O 3 and the support oxide, rather than geometric factors or the difference in the particle size of In 2 O 3 . Theoretical modelling revealed that surface O v facilitate the formation and stabilization of the formate (HCOO*) intermediate. While a carbonate-like structure is favored for CO 2 adsorption on CeO 2 -supported or unsupported In 2 O 3 catalysts, CO 2 tends to bind strongly in a bent configuration on the O v site at the In 2 O 3 -ZrO 2 interface. The distinct CO 2 adsorption structures on different supported In 2 O 3 catalysts may account for the different reaction energy profiles in the subsequent hydrogenation reactions, especially the rate-limiting step, i.e., hydrogenation of HCOO* to CH 2 O* and methoxy (CH 3 O*). The relatively higher methanol selectivity of In 2 O 3 catalyst supported on ZrO 2 with respect to that on CeO 2 are suggested to stem from the greater energy difference (Δ$E_a$) between the parallel hydrogenation and C-O bond cleavage of HCOO*, which leads to the formation of methanol and CO, respectively. We report this study underlines the important role of metal-oxide-interface in determining the catalytic behavior of oxide-supported In 2 O 3 catalysts in CO 2 conversion.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Simulating Sea-Ice Deformation in Viscous-Plastic Sea-Ice Models With CD-Grids

Linear kinematic features (LKFs) are found everywhere in the Arctic sea-ice cover. They are strongly localized deformations often associated with the formation of leads and pressure ridges. In viscous-plastic (VP) sea-ice models, the simulation of LKFs depends on several factors such as the grid resolution, the numerical solver convergence, and the placement of the variables on the mesh. In this study, we compare two recently proposed discretization with a CD-grid placement with respect to their ability to reproduce LKFs. The first (CD1) is based on a nonconforming finite element discretization, whereas the second (CD2) uses a conforming subgrid discretization. To analyze their resolution properties, we evaluate runs from different models (e.g., FESOM, MPAS) on a benchmark problem using quadrilateral, hexagonal and triangular meshes. Our findings show that the CD1 setup simulates more deformation structure than the CD2 setup. This highlights the importance of the type of spatial discretization for the simulation of LKFs. Due to the higher number of degrees of freedom, both CD-grids resolve more LKFs than traditional A, B, and C-grids at fixed mesh level. This is an advantage of the CD-grid approach, as high spatial mesh resolution is needed in VP sea-ice models to simulate LKFs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Enhanced upconversion and photoconductive nanocomposites of lanthanide-doped nanoparticles functionalized with low-vibrational-energy inorganic ligands

Upconverting nanoparticles (UCNPs) convert near-infrared (IR) light into higher-energy visible light, allowing them to be used in applications such as biological imaging, nano-thermometry, and photodetection. It is well known that the upconversion luminescent efficiency of UCNPs can be enhanced by using a host material with low phonon energies, but the use of low-vibrational-energy inorganic ligands and non-epitaxial shells has been relatively underexplored. Here, we investigate the functionalization of lanthanide-doped NaYF4 UCNPs with low-vibrational-energy Sn2S64- ligands. Raman spectroscopy and elemental mapping are employed to confirm the binding of Sn2S64- ligands to UCNPs. This binding enhances upconversion efficiencies up to a factor of 16, consistent with an increase in the luminescent lifetimes of the lanthanide ions. Annealing Sn2S64--capped UCNPs results in the formation of a nanocomposite comprised of UCNPs embedded within an interconnected matrix of SnS2, enabling each UCNP to be electrically accessible through the semiconducting SnS2 matrix. This facilitates the integration of UCNPs into electronic devices, which we demonstrate through the fabrication of a UCNP-SnS2 photodetector that detects UV and near-IR light. Our findings show the promise of using inorganic capping agents to enhance the properties of UCNPs while facilitating their integration into optoelectronic devices.

Pan, Jia-Ahn↗
DOE OSTI2025

sOPTICS: a modified density-based algorithm for identifying galaxy groups/clusters and brightest cluster galaxies

A direct approach to studying the galaxy–halo connection is to analyse groups and clusters of galaxies that trace the underlying dark matter haloes, emphasizing the importance of identifying galaxy clusters and their associated brightest cluster galaxies (BCGs). In this work, we test and propose a robust density-based clustering algorithm that outperforms the traditional Friends-of-Friends (FoF) algorithm in the currently available galaxy group/cluster catalogues. Our new approach is a modified version of the Ordering Points To Identify the Clustering Structure (OPTICS) algorithm, which accounts for line-of-sight positional uncertainties due to redshift space distortions by incorporating a scaling factor, and is thereby referred to as sOPTICS. When tested on both a galaxy group catalogue based on semi-analytic galaxy formation simulations and observational data, our algorithm demonstrated robustness to outliers and relative insensitivity to hyperparameter choices. In total, we compared the results of eight clustering algorithms. The proposed density-based clustering method, sOPTICS, outperforms FoF in accurately identifying giant galaxy clusters and their associated BCGs in various environments with higher purity and recovery rate, also successfully recovering 115 BCGs out of 118 reliable BCGs from a large galaxy sample. Furthermore, when applied to an independent observational catalogue without extensive re-tuning, sOPTICS maintains high recovery efficiency, confirming its flexibility and effectiveness for large-scale astronomical surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

UFO 2.0: the ‘Universal Feynman Output’ format

Abstract We present an update of the Universal FeynRules Output model format, commonly known as the UFO format, that is used by several automated matrix-element generators and high-energy physics software. We detail different features that have been proposed as extensions of the initial format during the last ten years, and collect them in the current second version of the model format that we coin the Universal Feynman Output format. Following the initial philosophy of the UFO, they consist of flexible and modular additions to address particle decays, custom propagators, form factors, the renormalisation group running of parameters and masses, and higher-order quantum corrections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Sparse Approximate Multifrontal Factorization with Composite Compression Methods

This article presents a fast and approximate multifrontal solver for large sparse linear systems. In a recent work by Liu et al., we showed the efficiency of a multifrontal solver leveraging the butterfly algorithm and its hierarchical matrix extension, HODBF (hierarchical off-diagonal butterfly) compression to compress large frontal matrices. The resulting multifrontal solver can attain quasi-linear computation and memory complexity when applied to sparse linear systems arising from spatial discretization of high-frequency wave equations. To further reduce the overall number of operations and especially the factorization memory usage to scale to larger problem sizes, in this article we develop a composite multifrontal solver that employs the HODBF format for large-sized fronts, a reduced-memory version of the nonhierarchical block low-rank format for medium-sized fronts, and a lossy compression format for small-sized fronts. This allows us to solve sparse linear systems of dimension up to 2.7 × larger than before and leads to a memory consumption that is reduced by 70% while ensuring the same execution time. The code is made publicly available in GitHub.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Python package for machine-readable access to PDG data (PDG Python API) v0.1

This Python package implements a high-level interface to access the data published by the Particle Data Group (PDG) in the Review of Particle Physics (the "Review"). The Particle Data Group is an international collaboration led by the PDG group at LBNL. The PDG summarizes the established knowledge in the field of particle physics in a single publication, the Review of Particle Physics. The Review is published and updated online (see https://pdg.lbl.gov) each year, and published in a scientific journal every other year. It is currently licensed under a CC BY-NC 4.0 license. In 2021 PDG was designated by the Office of Science as a SC PuRe Data Resource. The Review is one of the most highly cited publications in the field of particle physics. The PDG Python API is part of PDG's efforts to make all data provided in the Review available in machine-readable format. This data includes the PDG world averages (or best limits) on particle masses, widths or lifetimes, branching fractions, magnetic moments, form factors, coupling constant ratios, and searches, as well as particle quantum numbers. It also includes detailed information on how PDG arrived at its averages, such as e.g. tables of published measurements with comments and footnotes, information on the consistency of published measurements, and detailed fit information.

Beringer, Juerg↗
DOE OSTI2023

Spatio-Temporal Surrogates for Interaction of a Jet with High Explosives: Part II - Clustering Extremely High-Dimensional Grid-Based Data

Building an accurate surrogate model for the spatio-temporal outputs of a computer simulation is a challenging task. A simple approach to improve the accuracy of the surrogate is to cluster the outputs based on similarity and build a separate surrogate model for each cluster. This clustering is relatively straightforward when the output at each time step is of moderate size. However, when the spatial domain is represented by a large number of grid points, numbering in the millions, the clustering of the data becomes more challenging. In this report, we consider output data from simulations of a jet interacting with high explosives. These data are available on spatial domains of different sizes, at grid points that vary in their spatial coordinates, and in a format that distributes the output across multiple files at each time step of the simulation. We first describe how we bring these data into a consistent format prior to clustering. Borrowing the idea of random projections from data mining, we reduce the dimension of our data by a factor of thousand, making it possible to use the iterative k-means method for clustering. We show how we can use the randomness of both the random projections, and the choice of initial centroids in k-means clustering, to determine the number of clusters in our data set. Our approach makes clustering of extremely high dimensional data tractable, generating meaningful cluster assignments for our problem, despite the approximation introduced in the random projections.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Large-Volume Stimulation of Rock for Greatly Enhanced Fluids Recovery using Targeted Seismic-Assisted Hydraulic Fracturing (Final Technical Report)

This project has developed and demonstrated a new technology for large-volume and targeted comminution of rock in low permeability formations to enhance recovery from unconventional oil and gas (UOG) resources. The technology is based on a strategically designed interaction of multiple induced seismic pulses that assist the hydraulic fracturing process to enhance shear and multi-planar crack formation. This greatly increased rock stimulation, through bulk comminution, is expected to cause significant increase in permeability leading to enhancement of recovery factors for sub- surface fluids. The proposed technology is especially applicable for enhanced recovery in emerging UOG plays, such as ductile shales that are resistant to opening-mode fracturing by conventional hydraulic fracturing processes. The project combines an integrated experimental and computation approach to develop and demonstrate a modular technology that can be easily implement in the field to augment current practices. The effort integrates a fundamental scientific understanding of dynamic material response under constraint and damage-induced permeability and porosity enhancements at multiple length scales, along with models of comminution due to the local release of kinetic energy associated with high shear strain rate of dynamic deformation. The results will be validated through small-scale experiments and then implemented in a lab-scale field test to demonstrate the developed technology. The project involves collaboration between a solid mechanician, a materials scientist, and a petroleum engineering geo-mechanician. It builds on a successful history of success and collaboration that includes both fundamental scientific exploration and technology development.

04 OIL SHALES AND TAR SANDS↗