Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flux Measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Possibility of measuring gravity-wave momentum flux by single beam observation of MST radar

Vincent and Reid (1983) proposed a technique to measure gravity-wave momentum fluxes in the atmosphere by mesosphere-stratosphere-troposphere (MST) radars using two or more radar beams. Since the vertical momentum fluxes are assumed to be due to gravity waves, it appears possible to make use of the dispersion and polarization relations for gravity waves in extracting useful information from the radar data. In particular, for an oblique radar beam, information about both the vertical and the horizontal velocities associated with the waves are contained in the measured Doppler data. Therefore, it should be possible to extract both V sub Z and V sub h from a single beam observational configuration. A procedure is proposed to perform such an analysis. The basic assumptions are: the measured velocity fluctuations are due to gravity waves and a separable model gravity-wave spectrum of the Garrett-Munk type that is statistically homogeneous in the horizontal plane. Analytical expressions can be derived that relate the observed velocity fluctuations to the wave momentum flux at each range gate. In practice, the uncertainties related to the model parameters and measurement accuracy will affect the results. A MST radar configuration is considered.

Liu, C. H.↗

Plasma analyzer for the Pioneer Jupiter missions

A description is given of the NASA/Ames Research Center Plasma Probe on board the Jupiter Missions of the Pioneer 10 and 11 spacecraft. The instrument has two quadrispherical electrostatic analyzer units; one has high sensitivity and resolution and the other is capable of measuring large fluxes of solar wind particles. The two analyzer units measure particle energy-to-charge ratio, flux, and direction of flow for positive ions and electrons over the wide range of particle densities found in the solar wind during the Jupiter missions. Data formats in space and ground data processing, the NASA/Ames Research Center plasma probe calibration facility, and the instrument response functions are also described.

Mckibbin, D. D.↗

Measurement from satellites of land surface parameters and fluxes in the thermal infrared bands: Problems and methods

The main problems arising in the elaboration of accurate and reliable algorithms for extracting land surface parameters and flux from their measured radiances are discussed. Methods of solution in the thermal infrared spectral domain are described. Particular interest is given to the inversion of thermal models and to the problems resulting from the heterogeneity of the observed surfaces.

Becker, F.↗

Measurement of the light flux density patterns from luminaires proposed as photon sources for photosynthesis during space travel

Two luminaires were evaluated to determine the light flux density pattern on a horizontal plane surface. NASA supplied both luminaires; one was made by NASA and the other is commercially available. Tests were made for three combinations of luminaire height and luminaire lens material using the NASA luminaire; only one configuration of the commercial luminaire was tested. Measurements were made using four sensors with different wavelength range capabilities. The data are presented in graphical and tabular formats.

Walker, Paul N.↗

Inference of the ring current ion composition by means of charge exchange decay

The analysis of data from the Explorer 45 (S3-A) electrostatic analyzer in the energy range 5-30 keV has provided some new results on the ring current ion composition. It has been well established that the storm time ring current has a decay time of several days, during which the particle fluxes decrease nearly monotonically. By analyzing the measured ion fluxes during the several day storm recovery period and assuming that beside hydrogen other ions were present and that the decays were exponential in nature, three separate lifetimes for the ions were established. These fitted decay lifetimes are in excellent agreement with the expected charge exchange decay lifetimes for H(+), O(+) and He(+) in the energy and L value range of the data.

Smith, P. H.↗

Charged Particle Flux Sensor

Improved version of Faraday cup increases accuracy of measurements of flux density of charged particles incident along axis through collection aperture. Geometry of cone-and-sensing cup combination assures most particles are trapped.

Gregory, D. A.↗

Computation of solar magnetic fields from photospheric observations

The observational difficulties of obtaining the magnetic field distribution in the chromosphere and corona of the sun has led to methods of extending photospheric magnetic mesurements into the solar atmosphere by mathematical procedures. A new approach to this problem presented here is that a constant alpha force-free field can be uniquely determined from the tangential components of the measured photospheric flux alone. The vector magnetographs now provide measurements of both the solar photospheric tangential and the longitudinal magnetic field. This paper presents derivations for the computation of the solar magnetic field from these type of measurements. The fields considered are assumed to be a constant alpha force-free fields or equivalent, producing vanishing Lorentz forces. Consequently, magnetic field lines and currents are related by a constant and hence show an identical distribution. The magnetic field above simple solar regions are described from the solution of the field equations.

Hannakam, L.↗

On Deriving Incident Auroral Particle Fluxes in the Daytime Using Combined Ground-Based Optical and Radar Measurements

Particle energies and fluxes have predominantly been measured from instruments onboard satellites. In this study, we use daytime ground-based oxygen redline emission measurements, along with the ionospheric electron density, and electron temperature profiles measured from the incoherent scatter radar, and a physics-based modeling approach to derive the energy and flux of particles incident over Boston during the storm of 30 October 2003. We find that the characteristic energy and the associated flux vary between 0.07.5.7 keV and 0.5.130 mW/sq m, respectively, during the intense magnetic disturbance that brought aurora to midlatitudes. Such an approach not only offers another method to estimate the incident particle energies and fluxes but also enhances our understanding on the channels of energy deposition in the upper atmospheric region, especially during magnetic disturbances, about which database is poor.

Pallamraju, Duggirala↗

Monitoring the earth's emission using nonscanning radiometric measurements of ERBS satellite

The outgoing longwave flux is determined using the data measured by two medium field-of-view (MFOV) nonscanning sensors employed on the Earth Radiation Budget Satellite (ERBS) spacecraft launched on October 5, 1984 in a nonsun-synchronous trajectory. The two MFOV sensors are MFOV-T that measures the radiation in the wavelength region of 0.2 to 50 microns and MFOV-SW that senses the reflected radiation in the spectral band of 0.2 to 5.0 microns. The outgoing longwave fluxes for MFOV at satellite altitude are determined by subtracting the shortwave fluxes from the total fluxes measured by MFOV-T channel. The Stefan-Boltzmann law is used to determine the outgoing long-wave fluxes at the top of the atmosphere and the equivalent atmospheric temperatures.

Pandey, Dhirendra K.↗

Measurement of spectra and neutron fluxes on artificial earth satellites from the Cosmos series

In 1966-1967 measurements were carried out at the altitudes of 200 to 400 km to determine the spectra and fluxes of fast neutrons inside the hermetically sealed artificial earth satellites of the Cosmos series. The detectors used were nuclear emulsions of the B9 and BR types and an emulsion of the P9 type, filled with Li and P. Spectra and fluxes of neutrons in the range of energies from thermal energies to 10 MeV are presented. Neutron doses are also estimated.

Dudkin, V. Y.↗

Particle-laden weakly swirling free jets: Measurements and predictions

A theoretical and experimental investigation of particle-laden, weakly swirling, turbulent free jets was conducted. Glass particles, having a Sauter mean diameter of 39 microns with a standard deviation of 15 microns, were used. A single loading ratio of 0.2 was used in the experiments. Measurements are reported for three swirl numbers, ranging from 0.0 to 0.3. The measurements included mean and fluctuating velocities of both phases, and particle mass flux distributions. Measurements were compared with predictions from three types of multiphase flow analysis: locally homogeneous flow (LHF); deterministic separated flow (DSF); and stochastic separated flow (SSF). For the particle-laden jets, the LHF and DSF models did not provide very satisfactory predictions. The LHF model generally overestimated the rate of decay of particle mean axial and angular velocities with streamwise distance, due to the neglect of particle inertia. The LHF model predictions of particle mass flux also showed poor agreement with measurements due to the assumption of no-slip between phases. The DSF model also performed quite poorly for predictions of particle mass flux, because turbulent dispersion of the particles was neglected. The SSF model, which accounts for both particle inertia and turbulent dispersion of the particles, yielded reasonably good predictions throughout the flow field for the particle-laden jets.

Bulzan, Daniel L.↗

Particle-laden weakly swirling free jets - Measurements and predictions

A theoretical and experimental investigation of particle-laden, weakly swirling, turbulent free jets was conducted. Glass particles, having a Sauter mean diameter of 39 microns with a standard deviation of 15 microns, were used. A single loading ratio of 0.2 was used in the experiments. Measurements are reported for three swirl numbers, ranging from 0.0 to 0.3. The measurements included mean and fluctuating velocities of both phases, and particle mass flux distributions. Measurements were compared with predictions from three types of multiphase flow analysis: locally homogeneous flow (LHF); deterministic separated flow (DSF); and stochastic separated flow (SSF). For the particle-laden jets, the LHF and DSF models did not provide very satisfactory predictions. The LHF model generally overestimated the rate of decay of particle mean axial and angular velocities with streamwise distance, due to the neglect of particle inertia. The LHF model predictions of particle mass flux also showed poor agreement with measurements due to the assumption of no-slip between phases. The DSF model also performed quite poorly for predictions of particle mass flux, because turbulent dispersion of the particles was neglected. The SSF model, which accounts for both particle inertia and turbulent disperison of the particles, yielded reasonably good predictions throughout the flow field for the particle-laden jets.

Bulzan, Daniel L.↗

Enthalpy Distributions of Arc Jet Flow Based on Measured Laser Induced Fluorescence, Heat Flux and Stagnation Pressure Distributions

The centerline total enthalpy of arc jet flow is determined using laser induced fluorescence of oxygen and nitrogen atoms. Each component of the energy, kinetic, thermal, and chemical can be determined from LIF measurements. Additionally, enthalpy distributions are inferred from heat flux and pressure probe distribution measurements using an engineering formula. Average enthalpies are determined by integration over the radius of the jet flow, assuming constant mass flux and a mass flux distribution estimated from computational fluid dynamics calculations at similar arc jet conditions. The trends show favorable agreement, but there is an uncertainty that relates to the multiple individual measurements and assumptions inherent in LIF measurements.

Suess, Leonard E.↗

Doppler lidar measurement of profiles of turbulence and momentum flux

A short-pulse CO2 Doppler lidar with 150-m range resolution measured vertical profiles of turbulence and momentum flux. Example measurements are reported of a daytime mixed layer with strong mechanical mixing caused by a wind speed of 15 m/sec, which exceeded the speed above the capping inversion. The lidar adapted an azimuth scanning technique previously demonstrated by radar. Scans alternating between two elevation angles allow determination of mean U-squared, V-squared, and W-squared. Expressions were derived to estimate the uncertainty in the turbulence parameters. A new processing method, partial Fourier decomposition, has less uncertainty than the filtering used earlier.

Eberhard, Wynn L.↗