Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FARMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Cradle-to-Gate greenhouse gas emissions of the production of ethylene from U.S. Corn ethanol and comparison to fossil-derived ethylene production

Conventional ethylene production heavily depends on fossil-derived feedstocks via steam cracking, a very energy- and emission-intensive process. Researchers have been exploring alternatives to reduce CO 2 emissions including producing ethylene from biobased feedstocks. This paper evaluates the cradle-to-gate greenhouse gas (GHG) emissions of bioethylene produced from U.S. corn ethanol. The analysis includes different pathways for the dehydration of corn ethanol to ethylene and co-processing routes via fluid catalytic cracking (FCC) processes. For the FCC co-processing route carbon-14 analysis is used to determine bioethanol yields. A 127% reduction in life cycle GHG emissions of bioethylene is estimated compared to fossil-derived ethylene for the base case. Additional case studies are also discussed to understand the reduction of GHG emissions due to sustainable corn farming and renewable power use, biogenic carbon capture, and fuel switch with biofuels at the ethanol plant, and its impact on bioethylene GHG emissions.

carbon footprint↗

Urban heat islands can influence the wind energy resource during heatwaves

Urban wind energy is critical for sustainable electricity generation in cities. However, little research has explored how the urban heat island (UHI) effect influences wind energy, particularly in heatwaves when energy demand surges. In this study, we examine wind energy distribution in the Boston–Providence metropolitan area during heatwaves, using Weather Research and Forecasting (WRF) model integrated with Building Energy Parameterization/Building Energy Model (BEP/BEM). Two scenarios, a realistic case and a hypothetical case without urban warmth, were compared to isolate UHI impacts. Results reveal that UHI induces a "wind energy loss zone" in this urban area, reducing wind power density (WPD) by 20–30 W/m 2 at 50–100 m, while suburban/rural areas exhibit a "wind energy gain zone," with WPD increases up to 40 W/m 2 at 150–200 m. These losses diminish with distance from urban centers and become negligible beyond main urban and suburban sprawl. Heatwave expands the urban "loss zone", while amplifying wind energy gains in suburban/rural areas, driven by stronger thermal gradients and weakened background winds that intensify air convergence in urban and urban-rural circulations, thereby exacerbating urban wind energy losses by 15–20 %. An analysis of 235 wind farms using turbine power curves reveals that built areas dependent on stand-alone or off-grid turbines face significant energy deficits during a heatwave. Wind energy drops by up to 25 %, while cooling-related building energy demand rises 30–40 % during a heatwave. These findings underscore the need for strategic urban wind energy planning to ensure reliable power during extreme heat.

Energy - Wind↗

From inert gas to fertilizer, fuel and fine chemicals: N 2 reduction and fixation

The 100th anniversary of a leading nitrogen fixation technology developer like CASALE SA is a reason to reflect over the 20th century successful solution of the problem of world food supply, and to look out for solutions for sustainable developments with respect to ammonia production. Here, we review the role of nitrogen as essential chemical constituent in photosynthesis and biology, and component of ammonia as it is used as fertilizer for primary production by photosynthesis for farming and food supply and its future role as energy carrier. While novel synthesis methods and very advanced synchrotron based x-ray analytical techniques are being developed, we feel it is important to refer to the historical and economical context of nitrogen. The breaking of the N≡N triple bond remains a fundamental chemical and energetic problem in this context. We review the electrochemical ammonia synthesis as an energetically and environmentally benign method. Two relatively novel X-ray spectroscopy methods, which are relevant for the molecular understanding of the catalysts and biocatalysts, i.e. soft X-ray absorption spectroscopy and nuclear resonant vibration spectroscopy are presented. We illustrate the perceived reality in fertilizer usage on the field, and fertilizer production in the factory complex with photos and thus provide a contrast to the academic view of the molecular process of ammonia function and production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intensified reactive extraction for the acid-catalyzed conversion of fructose to 5-hydroxymethyl furfural

Here we conduct an experimental study of fructose dehydration to 5-hydroxymethyl furfural (HMF) in a biphasic microreactor as a function of residence time, temperature, and sugar loading using methyl butyl iso-ketone (MIBK) and 2-pentanol as extracting solvents. We demonstrate stable operation with maximum HMF yields of 93% and 87% in the two solvents, respectively, at 200 °C and a residence time of 2 s for a 5 wt% fructose aqueous feed. We report the highest optimal HMF space–time yield of 60 kg/L-hr at 200 °C (10 – 2,500-fold higher than published reports). Unexpectedly, an optimum organic-to-water ratio exists that depends on the solvent. Notably, we observe experimentally an increased fructose rate and HMF yield well above the extraction thermodynamic limit and hypothesize that the solvent plays a dual role, that of an extractant to protect HMF from degradation and a modifier of the fundamental chemistry. We expose mass transfer limitations of microreactors at longer residence times and higher temperatures and provide reactivity maps for their design. We show that batch reactors are unfit for high throughput and distributed manufacturing where small, farm-based systems are necessary.

42 ENGINEERING↗

Green pretreatment strategies for enhanced microbial lipid fermentation and synergistic high-quality lignin recovery for next-generation integrated biorefineries

Miscanthus × giganteus (Mxg) is a warm-season perennial grass being commercialized as a biomass feedstock for temperate farms. Three process strategies were compared for converting Mxg into single-cell oil and extracted lignin intermediates, as hydrothermal (HT) processing and two natural deep eutectic solvents (NADES), ChCl:LA (choline chloride:lactic acid) and ChCl:Gly (choline chloride:glycerol). Pretreatments were performed at 10% and 50% solids loading at 140 °C, 2 h; HT: 190 °C, 10 min. Enzymatic hydrolysates, generated at 10% solids using washed and unwashed biomass, were evaluated for microbial lipid production. Maximum glucose conversions from washed biomass reached 83.5% (ChCl:LA), 52.7% (ChCl:Gly), and 74.0% (HT). Remarkably, NADES-derived hydrolysates effectively replaced refined sugars for the cultivation of the oleaginous yeast Rhodotorula toruloides, achieving ∼51% higher biomass (OD 90.7) and lipid titers of 19.36 g/L within 45 h using a two-stage fermentation strategy. Lipid contents ranged from 34.5–44.5% dry weight, demonstrating reduced reliance on purified sugars. Beyond carbohydrate valorization, ChCl:LA pretreatment enabled high-purity lignin recovery (>89%) in a lignin-first strategy. Structural analyses (2D-HSQC and ³¹P NMR) showed syringyl (78.15%), guaiacyl (15.15%), and p-hydroxyphenyl (6.41%) units, with higher phenolic hydroxyl content (0.91 mmol/g) and a lower S/G ratio (0.19) than HT lignin (0.87 mmol/g, S/G 0.22). These attributes favor downstream lignin depolymerization into low-molecular-weight aromatics. Overall, NADES pretreatment simultaneously enhances microbial lipid yields and recovers high-quality lignin, advancing the economic feasibility of renewable diesel and sustainable aviation fuel (SAF) production from bioenergy crops within an integrated biorefinery framework.

2D HSQC↗

A scalable framework for quantifying field-level agricultural carbon outcomes

Agriculture contributes nearly a quarter of global greenhouse gas (GHG) emissions, which is motivating interest in adopting certain farming practices that have the potential to reduce GHG emissions or sequester carbon in soil. The related GHG emission (including N 2 O and CH 4 ) and changes in soil carbon stock are defined here as “agricultural carbon outcomes”. Accurate quantification of agricultural carbon outcomes is the basis for achieving emission reductions for agriculture, but existing approaches for measuring carbon outcomes (including direct measurements, emission factors, and process-based modeling) fall short of achieving the required accuracy and scalability necessary to support credible, verifiable, and cost-effective measurement and improvement of these carbon outcomes. Here we propose a foundational and scalable framework to quantify field-level carbon outcomes for farmland, which is based on the holistic carbon balance of the agroecosystem: Agroecosystem Carbon Outcomes = Environment (E) × Management (M) × Crop (C). Following a comprehensive review of the scientific challenges associated with existing approaches, as well as their tradeoffs between cost and accuracy, we propose that the most viable path for the quantification of field-level carbon outcomes in agricultural land is through an effective integration of various approaches (e.g. diverse observations, sensor/in-situ data, and modeling), defined as the “System-of-Systems” solution. Such a “System-of-Systems” solution should simultaneously comprise the following components: (1) scalable collection of ground truth data and cross-scale sensing of environment variables (E), management practices (M), and crop conditions (C) at the local field level; (2) advanced modeling with necessary processes to support the quantification of carbon outcomes; (3) systematic Model-Data Fusion (MDF), i.e. robust and efficient methods to integrate sensing data and models at each local farmland level; (4) high computation efficiency and artificial intelligence (AI) to scale to millions of individual fields with low cost; and (5) robust and multi-tier validation systems and infrastructures to ensure solution fidelity and true scalability, i.e. the ability of a solution to perform robustly with accepted accuracy on all targeted fields. In this regard, we provide here the detailed scientific rationale, current progress, and future research and development (R&D) priorities to achieve different components of the “System-of-Systems” solution, thus accomplishing the Environment×Management×Crop framework to quantify field-level agricultural carbon outcomes.

54 ENVIRONMENTAL SCIENCES↗

Hydrothermal liquefaction of wastewater-grown algae to produce synthetic aviation fuel: A combined experimental study and techno-economic assessment

Large-scale algae farms may someday become a consistent source of biomass feedstock for biofuels. Near-term supplies of algal biomass are available at certain water resource recovery facilities as algae cultivation is used as a method for nutrient recovery from specific effluent streams. Algae grown as a service shifts the value to the service rather than its sole use as a feedstock, which could enable the provision of algal biomass at low to no cost to biofuel producers. Hydrothermal liquefaction (HTL) can readily upgrade wet feedstock slurries, such as algae, to produce a carbon-enriched biocrude. The HTL biocrude can be hydrotreated and distilled, producing a variety of distillate fuels, including synthetic aviation fuel (SAF). We present a pathway, showing the experimental production of SAF from wastewater-grown algae via HTL, along with a techno-economic assessment to identify opportunities for process improvements. Critical quality attributes of the SAF, such as density, viscosity, surface tension, and freeze point, were estimated within the expected fuel experience ranges when compared against petroleum jet fuel. The average minimum fuel selling price of fuels from wastewater-grown algae for breakeven economics was $\$9.04$ per gasoline gallon equivalent (GGE). The sale of co-products such as struvite fertilizers and cement additives can add revenue to reduce the net cost. Ultimately, the selling price is influenced by the scale of the HTL processing facility. Adjusting estimations in the process scale, algae yield, and capital cost estimation can lower the price to $\$6.51$/GGE or raise it to $13.07/GGE.

Biofuels↗

Electrical substation grid testbed for DLT applications of electrical fault detection, power quality monitoring, DERs use cases and cyber-events

Electrical utilities continue to deploy more intelligent electronic devices (IEDs) inside and outside electrical substation, and are associated with customer-owned distributed energy resources (DERs). The integrity and confidentiality of data from these IEDs, like power meters and protective relays, is crucial. Blockchain technology could improve the resilience of microgrids by improving the security of data sharing. The penetration of customer-owned DERs (renewable energy sources) and the increasing deployment of IEDs can lead to integrate power system applications with Distributed Ledger Technology (DLT). In this study, we implemented the electrical faulted phase detection and power quality monitoring algorithms with a Cyber Grid Guard (CGG) system using DLT. In addition, the DERs (wind turbine farms) use case and protective relay cyber-event tests were assessed, by using the CGG system with DLT. In the experimental model, the testbed was created by using a real-time simulator and CGG system with power meters/ protective relays in-the-loop. The data collected from the CGG system and IEDs were compared with the same time stamp source. These results had shown the successful assessment of protection, control and monitoring applications using a CGG system with DLT. In the future, the ESGT with DERs and the CGG system will be used in other power system applications, based on implementing smart contracts between electrical utilities with customer-owned DERs.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Farmer characteristics and decision-making: A model for bioenergy crop adoption

We report the commercial development of biofuels and bioproducts depends on whether renewable biomass feedstock is available while not directly competing with the production of food. Farmers are one of the most important stakeholders in the biofuel supply chain and confront a range of uncertainties while entering the bioenergy market. Their decision-making process is extremely complex and rarely purely rational. Modeling farmer behavior requires considering a wide range of individual-level factors, socio-temporal dynamics, institutional settings, and their interactions. These characteristics make agent-based modeling a suitable framework for evaluating such systems. We developed a model to simulate farmer bioenergy crop adoption behavior across a 50-county study region in Nebraska, Kansas, and Colorado. The analysis considers adoption decisions for two bioenergy feedstocks, crop residues and energy crops. We examine the influence of individual and farm characteristics, market structure, social networks, and media influence on farmer adoption decisions. Our results indicate that different factors can have varied impacts on the speed of adoption for the crop residues and energy crops. Identifying levers that have the most impact on grower adoption can inform the design of interventions both from policy and private sector standpoints with important implications for the future the bioenergy industry.

09 BIOMASS FUELS↗

Can Food–Energy–Water Nexus Research Keep Pace with Agricultural Innovation?

The interconnection among food–energy–water (FEW) systems in meeting societal demands is broadly acknowledged. Similarly, competitive or synergistic allocations of water and energy resources for agricultural production, manufacturing, and human consumption are understood, and their economic impacts can be predicted. Far less appreciated and understood are the outcomes of the FEW nexus in response to operation changes in agricultural practices and the associated technological innovations for future generations. Also, the inter-scale and feedback effects of emerging technology-driven resource reallocation and decision-making on FEW systems are largely unknown. For example, how do the agroeconomic feedbacks of intelligent technologies influence the FEW nexus of agricultural production under environmental and demographic changes? How does the necessary water allocation for powering non-powered dams and pumped-storage hydropower generation influence agricultural production and municipal water supply maintenance? How do solar and wind energy farms influence land use for agriculture and the rural economy? In turn, how can the generated solar and wind energy help reduce the cost of groundwater extraction or water desalination?

42 ENGINEERING↗

Effect of temperature and aging duration on ethylene propylene diene monomer (EPDM) nonmetallic components used in caustic liquid waste transfer lines

Nonmetallic materials are used in waste transfer lines at the United States Department of Energy’s Hanford Site Tank Farm in Benton County, Washington, USA. During use, the ethylene propylene diene monomer (EPDM) inner hose of the hose-in-hose transfer lines (HIHTLs) are exposed to β and γ radiation, caustic solutions as well as high temperatures and high pressures. Aging behavior of specimens of EPDM HIHTLs and dog-bone shaped specimens were evaluated by exposing to a solution of 25% sodium hydroxide (NaOH) at 38 °C, 54 °C and 77 °C for 6 and 12-months as well as water only at 77 °C for 12-months. Tensile strength and burst pressure of the specimens were characterized and compared with the unexposed (baseline) specimens. Both the tensile strength of the EPDM material and the burst pressure of the HIHTLs significantly decreased with the higher temperatures and longer exposure times. Analyses using scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) of the HIHTLs and the dog-bone specimens were conducted. Our results show that the surface degradation increased with increasing exposure temperature. Penetration of NaOH into the EPDM material also increased with increasing temperature and exposure duration.

36 MATERIALS SCIENCE↗

Effect of solution concentration on ethylene propylene diene monomer (EPDM) nonmetallic components used in caustic liquid waste transfer lines

The hose-in-hose transfer lines (HIHTL) used to transfer waste at the United States Department of Energy’s Hanford Site Tank Farm are fabricated from an ethylene propylene diene monomer (EPDM) synthetic rubber. During waste transport, these hoses are exposed to several stressors including caustic solutions at high temperatures and high pressures, as well as β and γ radiation. The aging behavior of HIHTL and dog-bone shaped EPDM specimens were evaluated by exposure to solutions at 77 °C containing 0.00, 6.25, 12.50, and 25.00 % (v/v) sodium hydroxide (NaOH) for 12-months. After the exposure, the material properties of the specimens were measured and compared to the unaged samples. The material properties evaluated included the tensile strength of the EPDM dog-bone samples and the burst pressure of the HIHTL. Both the tensile strength of the EPDM dog-bone samples and the burst pressure of the HIHTL specimens exposed to the 6.25 % NaOH solution exhibited the most significant deterioration and those exposed to 25.00 % NaOH solution had the least deterioration. Finally, examination of the HIHTL and the EPDM dog-bone specimens with scanning electron microscopy showed that the deterioration for the specimens exposed to 6.25 % NaOH solution were the most severe and the samples exposed to 25.00 % NaOH solution had the least deterioration.

42 ENGINEERING↗

Policy choices and outcomes for offshore wind auctions globally

Offshore wind energy is rapidly expanding, facilitated largely through auctions run by governments. We provide a detailed quantified overview of utilised auction schemes, including geographical spread, volumes, results, and design specifications. Our comprehensive global dataset reveals heterogeneous designs. Although most auction designs provide some form of revenue stabilisation, their specific instrument choices vary and include feed-in tariffs, one-sided and two-sided contracts for difference, mandated power purchase agreements, and mandated renewable energy certificates. We review the schemes used in all eight major offshore wind jurisdictions across Europe, Asia, and North America and evaluate bids in their jurisdictional context. We analyse cost competitiveness, likelihood of timely construction, occurrence of strategic bidding, and identify jurisdictional aspects that might have influenced auction results. We find that auctions are embedded within their respective regulatory and market design context, and are remarkably diverse, though with regional similarities. Auctions in each jurisdiction have evolved and tend to become more exposed to market price risks over time. Less mature markets are more prone to make use of lower-risk designs. Still, some form of revenue stabilisation is employed for all auctioned offshore wind energy farms analysed here, regardless of the specific policy choices. Our data confirm a coincidence of declining costs and growing diffusion of auction regimes.

17 WIND ENERGY↗

Toward more mechanistic representations of biogeochemical processes in river networks: Implementation and demonstration of a multiscale model

A recently introduced multiscale model for representing the effects of small-scale hyporheic-zone biogeochemical processes is extended from the reach scale to river network scales. The model uses advection-dispersion-reaction equations for the channel network and one-dimensional advection-reaction subgrid models for the hyporheic zone. We summarize implementation in the integrated surface/subsurface hydrology modeling system Amanzi-ATS. The extension uses topologically defined meshes to represent stream/river networks and associates a hyporheic subgrid model with each channel grid cell. Biogeochemical reaction modeling capability residing in community software is accessed through an application programming interface. The implementation is verified against independent numerical solutions on a single reach. Mesh convergence studies show that commonly used semi-distributed representations can introduce significant spatial discretization error. Denitrification of farm runoff in a subbasin of the Portage River Basin in Ohio, USA is used to demonstrate the general-purpose reactive transport capability.

54 ENVIRONMENTAL SCIENCES↗

Integrating in situ environmental covariates in an American lobster catch model to improve impact assessment

The installation and operation of floating offshore wind power is an integral component of societal transition to renewable energy generation where fixed bottom offshore wind is not possible. However, it will cause unique ecosystem changes. To disentangle the effects of offshore wind installations from the concurrent effects of climate change and the fishing practices on commercially significant resources, we must develop detailed characterizations of the resources before development occurs. In the Gulf of Maine, American lobster is the most commercially and culturally important fishery. At the time of writing, this is the largest fishery by value in North America. Our understanding of baseline localized parameters (such as catch per trap at the spatial scale of individual turbines) should be informed by relationships to environmental, biological, and survey-specific functional drivers of catch. A more mechanistic understanding of catch will allow for strategic adjustments to Post- Deployment fishery responses and ultimately, the development of research- and commercial-scale floating offshore wind development. Here, we used survey data from the New England Aqua Ventus Pre-Construction Commercial Trapping Survey to develop Generalized Additive Models describing seasonal catch per trap for legal and sublegal lobsters. We found fall catch to be nearly twice that of spring. Bottom temperature dynamics could be used to predict catch, and the Fall survey was associated with a warmer temperature regime. By using analytical tools that incorporate environmental heterogeneity, we developed monitoring methods from preconstruction baseline data that will be applicable over the post-construction operating period of an offshore wind farm.

BACI↗

Meeting sustainable aviation fuel policy targets through first generation corn biorefineries

This paper investigates options to produce low carbon and renewable aviation fuel through existing commercial first generation biorefineries, which could be strategic given the rapid growth of the electric vehicle market for personal mobility. We evaluate the environmental impact of retrofitting a first generation biorefinery to produce aviation fuel through chemical process simulation. The analysis investigates the potential for reducing greenhouse gas (GHG) emissions and displacing fossil fuel (petroleum-based jet kerosene) in the aviation fuel industry through using corn feedstocks in dry grind biorefineries to convert sugars to 1,4-dimethylcyclooctane (DMCO), which qualifies as renewable jet-A fuel blend and is infrastructure compatible. Further, the average life cycle GHG emissions for a baseline case and a scenario with carbon capture and storage (CCS) of fermentative CO 2 are 36 and 5g CO 2 e/MJ DMCO, respectively. Investment in CCS at the biorefinery and adoption of crop best management practices on farms are essential for mitigating the risks of induced land use change GHG emissions for existing corn biorefineries. DMCO as a low-carbon aviation fuel could be a strategic fuel product for retrofitting existing corn dry grind facilities. For aviation fuel supply, corn dry grind facilities could displace about 12% of jet fuel demand in the near term, which would meet sustainable aviation fuel policy targets. We conclude that corn-to-DMCO shows promise for near-term low-carbon fuel markets in the aviation industry and as a bridge to developing biomass-based jet fuel in the future.

09 BIOMASS FUELS↗

How does uncertainty of soil organic carbon stock affect the calculation of carbon budgets and soil carbon credits for croplands in the U.S. Midwest?

Cropland carbon budget depicts the amount of carbon flowing in and out of agroecosystems and the changes in carbon stocks of soil and living biomass during the same period. Soil carbon credit is the additional change in soil carbon stock under certain farming practices compared with the business-as-usual practices. Accurately calculating cropland carbon budget and soil carbon credit is critical to assessing climate change mitigation potential in agroecosystems. The calculation of cropland carbon budget and soil carbon credit is sensitive to local soil and climatic conditions, especially initial soil organic carbon (SOC) stock, which is determined by both SOC concentration (SOC%) and bulk density (Bulk_Density). SOC stock data are either from soil sampling or gridded public survey data. In agroecosystem models, SOC stock data are a key model input for quantifying cropland carbon budget and soil carbon credit. However, various types and degrees of uncertainties exist in SOC stock datasets, which propagate to the quantification of SOC stock change. In particular, a large discrepancy is found in two widely used SOC stock datasets — Rapid Carbon Assessment dataset (RaCA) and Gridded Soil Survey Geographic Database (gSSURGO) — in the U.S. Midwest, with a relative difference (quantified using Normalized Root Mean Square Error, NRMSE) of 48.0% for 0–30 cm SOC stock between the two datasets. It remains largely unclear how uncertainty in SOC stocks affects the calculation of cropland carbon budget and soil carbon credit. To address this question, we used a well-validated process-based agroecosystem model, ecosys, to assess the impacts of SOC stock uncertainty on carbon budget and soil carbon credit calculation in the U.S. Midwestern corn-soybean rotation systems. Our results reveal the following findings: (1) A sizable discrepancy exists in simulated cropland carbon budget between using gSSURGO and using RaCA for their SOC% and Bulk_Density as model inputs, with a Pearson correlation coefficient (r) of only 0.4 for simulated change of SOC stock (ΔSOC) using these two different soil datasets. (2) Simulated cropland carbon budget components were more sensitive to initial SOC% than to Bulk_Density. For example, the upper and lower quartiles of multi-year averaged ΔSOC were –29.8 and 4.8 gC/m 2 /year for the selected counties respectively, with an uncertainty of 13.7 and 0.7 gC/m 2 /year induced by uncertainties in initial SOC% and Bulk_Density, respectively. (3) Both simulated ΔSOC and its uncertainty were negatively correlated with initial SOC%, whereas ΔSOC was negatively correlated with air temperature, and ΔSOC uncertainty was positively correlated with air temperature. (4) The uncertainty of calculated soil carbon credits was much smaller compared with the uncertainty of calculated absolute carbon budgets assuming the same SOC stock uncertainty level in the inputs. Specifically, in our assessment comparing planting cover crops vs no cover crop, the uncertainty of calculated soil carbon credits induced by initial SOC% uncertainty was less than 4% (relative to the quantified value of the soil carbon credits) for 90% of the cases. Our analysis highlights that high accuracy measurement of SOC% as inputs is needed for the calculation of cropland carbon budgets; however, soil carbon credit quantification is much less sensitive to the initial SOC% inputs, and the current publicly available soil datasets (e.g., gSSURGO) are largely suitable for the calculation of soil

54 ENVIRONMENTAL SCIENCES↗

Synchrotron resolved microscale mineralogy and elemental composition of individual plinthic and manganiferous nodules from agricultural soils

Iron and manganese oxides are strong sorbents and elemental scavengers in the environment that can form macroscopic nodules in soils. Despite their importance in the geochemical cycling of nutrients and contaminants, nodules are rarely characterized. When analyzed, they are often combined into bulk samples, obscuring individual characteristics. This study investigates the composition and mineralogy of individual plinthic and manganiferous nodules in soil from cropping systems in the Farming Systems Project in Beltsville, Maryland. Elemental composition indicates the accumulation of contaminants and nutrients, including copper in all nodules and high levels of phosphorus in select nodules. Sequential extractions determine that highly crystalline minerals comprise the nodules, locking away these nutrients and contaminants. Bulk X-ray diffraction (XRD) demonstrated distinct mineralogies in the plinthic and manganiferous nodules, with the former comprised of quartz, goethite, and kaolinite, and the latter consisting of quartz, Mn 2 O 3 , and hematite. Synchrotron and laboratory-based X-ray fluorescence (XRF) mapping gives critical insight into the elemental distribution within the nodules and elucidates spatial elemental associations, including the coupling of manganese and iron in the manganiferous nodules. XRF maps paired with µXRD provide microscale spatial resolution in mineralogy, which resolved several phases not apparent in bulk XRD, manganese’s association with goethite, and minerals indicative of redox transformations, including magnetite and maghemite. These novel results provide critical insight into the microscale mineralogy and individual elemental composition of plinthic and manganiferous nodules, as well as how they alter bulk soil geochemistry in ways largely unaccounted for in research on soil systems.

36 MATERIALS SCIENCE↗