Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

The synergistic effects of central core size and end group engineering on performance of narrow bandgap nonfullerene acceptors

Understanding the relationship between the molecular structure and photoelectric properties of fused-ring non-fullerene acceptors (NFAs) is of far-reaching significance to the development of organic solar cells (OSCs). Herein, six NFAs based on multiple thiophenes (4 T, 6 T and 8 T) are employed to systematically probe the synergistic effects of extending central core size and terminal fluorination. The absorption results manifest that the molecular absorption is comprehensively affected by molecular crystallinity, planarity, conjugation length and intramolecular electron push–pull effect, simultaneously. The intensity of electron push–pull effect is not only related to the electron-donating ability of central core and the electron-withdrawing ability of end group, but also may be related to the distance between the positive and negative centers. The extension of central core leads to the more planar backbone and stronger crystallinity of NFAs, and less energy loss (E loss ) in its based OSC. Compared with the extension of central core, terminal fluorination has a greater impact on molecular photoelectric properties. The terminal fluorination significantly enhances the push–pull effect, lowers the energy levels, and slightly increases the vibrational relaxation. As a result, the strongest crystallinity and coplanarity of 8TIC-4F lead to a low vibrational relaxation of 0.18 eV, which makes PTB7-Th:8TIC-4F device exhibit a small E loss of 0.51 eV and a high efficiency of 10.4%. In addition, the fluorinated 6TIC-4F with suitable core size exhibits suitable energy level, absorption, crystallization, and phase separation morphology, making its as-cast device up to 11.61% efficiency. Finally, to the best of the authors’ knowledge, the PCE of 11.61% for PTB7-Th:6TIC-4F based device without any treatment is one of the highest values reported for the NAFs with over 1000 nm absorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Benzimidazole Based Hole‐Transporting Materials for High‐performance Inverted Perovskite Solar Cells

Abstract Interfaces play a decisive role in perovskite solar cells’ power conversion efficiency and their long‐term durability. Small‐molecule hole‐transporting materials (HTMs) have grabbed enormous attention due to their structural flexibility, material properties, and stabilities, allowing for improved operational durability in perovskite photovoltaics. This study synthesizes and investigates a new class of benzimidazole‐based small molecules, named YJS001 and YJS003 , serving as the HTMs to enable high‐efficiency mixed‐cation mixed‐halide perovskite solar cells. The benzimidazole‐based materials are dopant‐free HTMs composed of donor and acceptor building blocks that are designed to engineer the energy level alignment near the HTM/perovskite interface. Mixed‐cation mixed‐halide perovskites can be grown uniformly on both HTMs with large crystalline grains. It is discovered that the donor‐rich YJS003 ‐based solar cell exhibits a high open‐circuit voltage of 1.09 V with a champion power conversion efficiency of over 20%. Power‐dependent current–voltage characteristics of the solar cells are analyzed, from which the high performance of YJS003's excellent hole mobility and well‐aligned energy level is attributed. This work introduces a new class of benzimidazole‐based small molecules as HTMs, that paves the path for dopant free interface material development for commercialization of perovskite solar cells.

14 SOLAR ENERGY↗

Prospects for rapid deceleration of small molecules by optical bichromatic forces

We examine the prospects for utilizing the optical bichromatic force (BCF) to greatly enhance laser deceleration and cooling for near-cycling transitions in small molecules. We discuss the expected behavior of the BCF in near-cycling transitions with internal degeneracies, then consider the specific example of decelerating a beam of calcium monofluoride molecules. We have selected CaF as a prototype molecule both because it has an easily accessible near-cycling transition and because it is well suited to studies of ultracold molecular physics and chemistry. We also report experimental verification of one of the key requirements, the production of large bichromatic forces in a multilevel system with significant energy level splittings, by performing tests in an atomic beam of metastable helium.

74 ATOMIC AND MOLECULAR PHYSICS↗

Enhancing Performance of Nonfullerene Acceptors via Side‐Chain Conjugation Strategy

A side‐chain conjugation strategy in the design of nonfullerene electron acceptors is proposed, with the design and synthesis of a side‐chain‐conjugated acceptor (ITIC2) based on a 4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐ b :4,5‐ b′ ]di(cyclopenta‐dithiophene) electron‐donating core and 1,1‐dicyanomethylene‐3‐indanone electron‐withdrawing end groups. ITIC2 with the conjugated side chains exhibits an absorption peak at 714 nm, which redshifts 12 nm relative to ITIC1. The absorption extinction coefficient of ITIC2 is 2.7 × 10 5 m −1 cm −1 , higher than that of ITIC1 (1.5 × 10 5 m −1 cm −1 ). ITIC2 exhibits slightly higher highest occupied molecular orbital (HOMO) (−5.43 eV) and lowest unoccupied molecular orbital (LUMO) (−3.80 eV) energy levels relative to ITIC1 (HOMO: −5.48 eV; LUMO: −3.84 eV), and higher electron mobility (1.3 × 10 −3 cm 2 V −1 s −1 ) than that of ITIC1 (9.6 × 10 −4 cm 2 V −1 s −1 ). The power conversion efficiency of ITIC2‐based organic solar cells is 11.0%, much higher than that of ITIC1‐based control devices (8.54%). Our results demonstrate that side‐chain conjugation can tune energy levels, enhance absorption, and electron mobility, and finally enhance photovoltaic performance of nonfullerene acceptors.

Wang, Jiayu↗

Gallium Electromagnetic (GEM) Thruster Performance Measurements

Discharge current, terminal voltage, and mass bit measurements are performed on a coaxial gallium electromagnetic thruster at discharge currents in the range of 7-23 kA. It is found that the mass bit varies quadratically with the discharge current which yields a constant exhaust velocity of 20 km/s. Increasing the electrode radius ratio of the thruster from to 2.6 to 3.4 increases the thruster efficiency from 21% to 30%. When operating with a central gallium anode, macroparticles are ejected at all energy levels tested. A central gallium cathode ejects macroparticles when the current density exceeds 3.7 10(exp 8) A/square m . A spatially and temporally broad spectroscopic survey in the 220-520 nm range is used to determine which species are present in the plasma. The spectra show that neutral, singly, and doubly ionized gallium species are present in the discharge, as well as annular electrode species at higher energy levels. Axial Langmuir triple probe measurements yield electron temperatures in the range of 0.8-3.8 eV and electron densities in the range of 8 x 10(exp )20 to 1.6 x 10(exp 21) m(exp -3) . Triple probe measurements suggest an exhaust plume with a divergence angle of 9 , and a completely doubly ionized plasma at the ablating thruster cathode.

Thomas, Robert E.↗

Relativistic fine-structure oscillator strengths for Li-like ions

Relativistic configuration interaction results on the weighted oscillator strengths are presented for the K{beta} satellite x rays from 1s2s3p-1s{sup 2}2s transitions in Li-like ions with 14{<=}Z{<=}54. The calculations are carried out in the active space approximation using multiconfiguration Dirac-Fock wave functions with the inclusion of the finite nuclear size effect, the Breit interaction, and quantum electrodynamic corrections. The resulting x-ray wavelengths and rates are compared with other available data. An attempt is also made to analyze the irregularities in the fine-structure energy levels and x-ray rates due to configuration mixing together with the Breit interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resolution of the vibrational energy distribution function using a direct simulation Monte Carlo-master equation approach

The direct simulation Monte Carlo (DSMC) method is the primary numerical technique for analysis of rarefied gas flows. While recent progress in computational chemistry is beginning to provide vibrationally resolved transition and reaction cross sections that can be employed in DSMC calculations, the particle nature of the standard DSMC method makes it difficult to use this information in a statistically significant way. The current study introduces a new technique that makes it possible to resolve all of the vibrational energy levels by using a master equation approach along with temperature-dependent transition rates. The new method is compared to the standard DSMC technique for several heat bath and shock wave conditions and demonstrates the ability to resolve the full vibrational manifold at the expected overall rates of relaxation. The ability of the new master equation approach to the DSMC method for resolving, in particular, the high-energy states addresses a well-known, longstanding deficiency of the standard DSMC method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiphoton ionization of the calcium atom by linearly and circularly polarized laser fields

We theoretically study multiphoton ionization of the Ca atom irradiated by the second (photon energy 3.1 eV) and third (photon energy 4.65 eV) harmonics of Ti:sapphire laser pulses (photon energy 1.55 eV). Because of the dense energy level structure the second and third harmonics of a Ti:sapphire laser are nearly single-photon resonant with the 4s4p {sup 1}P{sup o} and 4s5p {sup 1}P{sup o} states, respectively. Although two-photon ionization takes place through the near-resonant intermediate states with the same symmetry in both cases, it turns out that there are significant differences between them. The photoelectron energy spectra exhibit the absence or presence of substructures. More interestingly, the photoelectron angular distributions clearly show that the main contribution to the ionization processes by the third harmonic arises from the far-off-resonant 4s4p {sup 1}P{sup o} state rather than the near-resonant 4s5p {sup 1}P{sup o} state. These findings can be attributed to the fact that the dipole moment for the 4s{sup 2} {sup 1}S{sup e}-4s5p {sup 1}P{sup o} transition is much smaller than that for the 4s{sup 2} {sup 1}S{sup e}-4s4p {sup 1}P{sup o} transition.

74 ATOMIC AND MOLECULAR PHYSICS↗

Near surface inversion layer recombination in Al{sub 2}O{sub 3} passivated n-type silicon

On n-type silicon, negatively charged surface passivation layers create a near surface recombination channel, which could significantly reduce the effective carrier lifetime at low injection levels (Δn < 10{sup 14 }cm{sup −3}). This effect is described by Shockley Read Hall recombination at homogeneously distributed defects in the silicon wafer. In the near surface region, fixed charges in the dielectric layer significantly change the carrier concentrations and the recombination rate of defects. Sentaurus device simulations show that the contribution of the near surface recombination to the effective carrier lifetime depends on the properties of the involved defects. The lifetime reduction is strongest when the involved defects have an energy level in the lower half of the band gap and a very high electron to hole capture cross section ratio. For the simulation, a very low defect density in the order of 10{sup 8 }cm{sup −3} is assumed, which is a realistic value in highly pure float zone silicon. Quasi-steady state photoconductance measurements on n-type silicon with Al{sub 2}O{sub 3} passivation are done and fitted with the recombination model. Very good correlation between simulation and experiment is achieved when the involved recombination centers have an electron to hole capture cross section ratio of 10{sup 7} and an energy level of −0.2 eV w.r.t. the intrinsic level. The simulated defect properties are discussed in respect of transition metal and doping related defects reported in literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical conduction mechanism of LaNi{sub x}Me{sub 1−x}O{sub 3−δ} (Me = Fe, Mn)

Graphical abstract: Compositional dependence of (a) electrical conductivity and (b) E{sub a} for hopping conduction of LaNi{sub x}Me{sub 1−x}O{sub 3} (Me = Fe, Mn). - Highlights: • Electrical conduction mechanism of LaNi{sub x}Me{sub 1−x}O{sub 3} (Me = Fe, Mn) was investigated. • Hopping conduction model could be applied for conductivity of both specimens. • The difference of E{sub a} due to that of energy level of Fe and Mn was observed. • Hole concentration estimated by iodimetry increases with increasing Ni content. - Abstract: Electrical conduction mechanism of LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} and LaNi{sub x}Mn{sub 1−x}O{sub 3+δ} expected as Sr-free new cathode material for solid oxide fuel cells was analyzed. Electrical conduction behaviors of both specimens could be well fitted by small polaron hopping conduction model. The electrical conductivity of LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} increased with increasing Ni content, showing agreement with decrease of activation energy for hopping conduction. The decrease of electrical conductivity and increase of activation energy of LaNi{sub x}Mn{sub 1−x}O{sub 3+δ} were observed with increasing Ni content for 0.0 ≤ x ≤ 0.4. Further Ni substitution increased electrical conductivity and decreased activation energy for 0.4 ≤ x ≤ 0.6. It was revealed using iodometry that the difference of hole carrier density between LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} and LaNi{sub x}Mn{sub 1−x}O{sub 3+δ} was small. It was suspected that the origin of the difference of electrical conduction behavior of LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} and LaNi{sub x}Mn{sub 1-x}O{sub 3+δ} was difference of energy level of e{sub g} band composed of Fe 3d or Mn 3d orbitals and their overlapping quantity with O 2p and Ni 3d band.

36 MATERIALS SCIENCE↗

Quantum states built on classical nonlinear resonances for slowly deforming billiards

We study the modification in the energy spectrum of a closed, adiabatic Hamiltonian system due to the presence of classical nonlinear resonances. A number of resonances are shown to appear in the neighbourhood of the unperturbed energy levels. The unperturbed system is a simple rectangular billiard, subjected to adiabatic rotations and vibrations. We believe that the results hold equally well for a generic unperturbed system expressible in action variables alone, and perturbed there from.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurements of continuum lowering in solid-density plasmas created from elements and compounds

The effect of a dense plasma environment on the energy levels of an embedded ion is usually described in terms of the lowering of its continuum level. For strongly coupled plasmas, the phenomenon is intimately related to the equation of state; hence, an accurate treatment is crucial for most astrophysical and inertial-fusion applications, where the case of plasma mixtures is of particular interest. In this study, we present an experiment showing that the standard density-dependent analytical models are inadequate to describe solid-density plasmas at the temperatures studied, where the reduction of the binding energies for a given species is unaffected by the different plasma environment (ion density) in either the element or compounds of that species, and can be accurately estimated by calculations only involving the energy levels of an isolated neutral atom. Lastly, the results have implications for the standard approaches to the equation of state calculations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Y-Type Non-Fullerene Acceptors with Outer Branched Side Chains and Inner Cyclohexane Side Chains for 19.36% Efficiency Polymer Solar Cells

Raising the lowest unoccupied molecular orbital (LUMO) energy level of Y-type non-fullerene acceptors can increase the open-circuit voltage (V oc ) and thus the photovoltaic performance of the current top performing polymer solar cells (PSCs). One of the viable routes is demonstrated by the successful Y6 derivative of L8-BO with the branched alkyl chains at the outer side. This will introduce steric hindrance and reduce intermolecular aggregation, thus open up the bandgap and raise the LUMO energy level. To take further advantages of the steric hindrance influence on optoelectronic properties of Y6 derivatives, two Y-type non-fullerene acceptors of BTP-Cy-4F and BTP-Cy-4Cl are designed and synthesized by adopting outer branched side chains and inner cyclohexane side chains. An outstanding V oc of 0.937 V is achieved in the D18:BTP-Cy-4F binary blend devices along with a power conversion efficiency (PCE) of 18.52%. With the addition of BTP-eC9 to extend the absorption spectral coverage, a remarkable PCE of 19.36% is realized finally in the related ternary blend devices, which is one of the highest values for single-junction PSCs at present. The results illustrate the great potential of cyclohexane side chains in constructing high-performance non-fullerene acceptors and their PSCs.

36 MATERIALS SCIENCE↗

Electrodynamics of finite-size particles with arbitrary spin

We construct the most general Hamiltonian for the electromagnetic interaction of the finite-size particle-like nucleus with arbitrary spin, magnetic dipole, and electric quadrupole moments. It includes all the terms, which are important for obtaining atomic energy levels up to the order {alpha}{sup 6}. The result is verified against spin s=0, 1/2, and 1 cases, where the Foldy-Wouthuysen transformation is performed of the corresponding relativistic equation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Analysis of the energy distribution of interface traps related to tunnel oxide degradation using charge pumping techniques for 3D NAND flash applications

Graphical abstract: The degradation tendency extracted by CP technique was almost the same in both the bulk-type and TFT-type cells. - Highlights: • D{sub it} is directly investigated from bulk-type and TFT-type CTF memory. • Charge pumping technique was employed to analyze the D{sub it} information. • To apply the CP technique to monitor the reliability of the 3D NAND flash. - Abstract: The energy distribution and density of interface traps (D{sub it}) are directly investigated from bulk-type and thin-film transistor (TFT)-type charge trap flash memory cells with tunnel oxide degradation, under program/erase (P/E) cycling using a charge pumping (CP) technique, in view of application in a 3-demension stackable NAND flash memory cell. After P/E cycling in bulk-type devices, the interface trap density gradually increased from 1.55 × 10{sup 12} cm{sup −2} eV{sup −1} to 3.66 × 10{sup 13} cm{sup −2} eV{sup −1} due to tunnel oxide damage, which was consistent with the subthreshold swing and transconductance degradation after P/E cycling. Its distribution moved toward shallow energy levels with increasing cycling numbers, which coincided with the decay rate degradation with short-term retention time. The tendency extracted with the CP technique for D{sub it} of the TFT-type cells was similar to those of bulk-type cells.

36 MATERIALS SCIENCE↗

Operational electrochemical stability of thiophene-thiazole copolymers probed by resonant Raman spectroscopy

We report on the electrochemical stability of hole polarons in three conjugated polymers probed by resonant Raman spectroscopy. The materials considered are all isostructural to poly(3-hexyl)thiophene, where thiazole units have been included to systematically deepen the energy level of the highest occupied molecular orbital (HOMO). We demonstrate that increasing the thiazole content planarizes the main conjugated backbone of the polymer and improves the electrochemical stability in the ground state. However, these more planar thiazole containing polymers are increasingly susceptible to electrochemical degradation in the polaronic excited state. We identify the degradation mechanism, which targets the C=N bond in the thiazole units and results in disruption of the main polymer backbone conjugation. The introduction of thiazole units to deepen the HOMO energy level and increase the conjugated backbone planarity can be beneficial for the performance of certain optoelectronic devices, but the reduced electrochemical stability of the hole polaron may compromise their operational stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cyclic behavior of ultrafast self-modulation of the light-absorption spectrum under conditions of pump and stimulated emission in GaAs

Under picosecond photogeneration of charge carriers in GaAs, accompanied by intense stimulated emission of the semiconductor itself, ultrafast self-modulation of its light-absorption spectrum takes place, which consists in the appearance of regions of local absorption enhancement (bumps) in the spectrum. The ultrafast self-modulation is found to exhibit a cyclic behavior; i.e., the pattern of the self-modulation of the spectrum (the number and spectral position of the bumps) is repeated after a certain time T{sub c} falling in the picosecond range. The cycle period T{sub c} varies over the time span of the pump pulse and depends on the pulse energy, which means that T{sub c} is a function of the pump intensity. Assuming that self-modulation of the absorption reflects self-modulation of the charge-carrier energy distribution in GaAs under pumping, experimental results can be formulated as follows: in the process of the ultrafast self-modulation, deviations of the occupancies of different energy levels from the Fermi distribution evolve with time in a mutually related way; the distribution of the occupancy depletion in the conduction band repeats cyclically in time; and the cycle period decreases as the intensity of the pump increases.

36 MATERIALS SCIENCE↗

Band structure of doubly-odd nuclei around mass 130

Nuclear structure of the doublet bands in the doubly-odd nuclei with mass A{approx}130 is studied in terms of a pair-truncated shell model. The model reproduces quite well the energy levels of the doublet bands and the electromagnetic transitions. The analysis of the electromagnetic transitions reveals new band structure of the doublet bands.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗