Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Thermoelectric properties of Al doped Mg{sub 2}Si material

In the present paper we have calculated thermoelectric properties of Al doped Mg{sub 2}Si material (Mg{sub 2−x}Al{sub x}Si, x=0.06) using Pseudo potential plane wave method based on DFT and Semi classical Boltzmann theory. The calculations showed n-type conduction, indicating that the electrical conduction are due to electron. The electrical conductivity increasing with increasing temperature and the negative value of Seebeck Coefficient also show that the conduction is due to electron. The thermal conductivity was increased slightly by Al doping with increasing temperature due to the much larger contribution of lattice thermal conductivity over electronic thermal conductivity.

36 MATERIALS SCIENCE↗

Electrical and Surface Morphology of Polyvinylchloride Composites Filled with Aluminum Powder

In this work, the electrical and surface morphology of polyvinyl chloride (PVC) composites filled with different concentration of aluminum powder varying from 0 to 40 wt.% have been prepared by solution costing method. The electrical conductivity of these composites were investigated in the frequency range 100 Hz-10 MHz at room temperature. The conductivity of the composites system exhibited a strong frequency dependence particularly in the vicinity of percolation threshold (20 wt.%). It was observed that the electrical conductivity gradually increased with filler concentration and frequency and explained in terms of hopping conduction mechanism. The electrical conductivity of the composites obeys universal power law (i.e. {sigma} = Af{sup n}), where, n is power exponent. The scanning electron microscope (SEM) micrographs indicate the agglomeration of aluminum particles dispersed within the PVC at the higher aluminum concentration, yielding a conductive path through the composites. It is also corroborated with electrical conductivity result.

36 MATERIALS SCIENCE↗

Functionally graded thermal vias for inductor winding heat flow control

Embodiments of the disclosure relate to apparatuses for enhanced thermal management of an inductor assembly using functionally-graded thermal vias for heat flow control in the windings of the inductor. In one embodiment, a PCB for an inductor assembly includes a top surface and a bottom surface. Two or more electrically-conductive layers are embedded within the PCB and stacked vertically between the top surface and the bottom surface. The two or more electrically-conductive layers are electrically connected to form an inductor winding. A plurality of thermal vias thermally connects each of the two or more electrically-conductive layers to a cold plate thermally connected to the bottom surface. A number of thermal vias thermally connecting each electrically-conductive layer to the cold plate is directly proportional to a predetermined rate of heat dissipation from the electrically-conductive layer.

Dede, Ercan↗

Conductive fabric seal

Disclosed are several examples of a system and method for detecting if an article is being tampered with. Included is a covering made of a substrate that is coated with a layer of an electrically conductive material that forms an electrically conductive surface having an electrical resistance. The covering is configured to at least partially encapsulate the article such that the article cannot be tampered with, without modifying the electrical resistance of the electrically conductive surface of the covering. A sensing device is affixed to the electrically conductive surface of the covering and the sensing device monitors the condition of the covering by producing a signal that is indicative of the electrical resistance of the electrically conductive surface of the covering. A measured electrical resistance that differs from a nominal electrical resistance is indicative of a covering that is being tampered with and an alert is communicated to an observer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conductive fabric seal

Disclosed are several examples of a system and method for detecting if an article is being tampered with. Included is a covering made of a substrate that is coated with a layer of an electrically conductive material that forms an electrically conductive surface having an electrical resistance. The covering is configured to at least partially encapsulate the article such that the article cannot be tampered with, without modifying the electrical resistance of the electrically conductive surface of the covering. A sensing device is affixed to the electrically conductive surface of the covering and the sensing device monitors the condition of the covering by producing a signal that is indicative of the electrical resistance of the electrically conductive surface of the covering. A measured electrical resistance that differs from a nominal electrical resistance is indicative of a covering that is being tampered with and an alert is communicated to an observer.

36 MATERIALS SCIENCE↗

Analysis of Advanced Thermoelectric Materials and Their Functional Limits

The world's demand for energy is increasing dramatically, but the best energy conversion systems operate at approximately 30% efficiency. One way to decrease energy loss is in the recovery of waste heat using thermoelectric (TE) generators. A TE generator is device that generates electricity by exploiting heat flow across a thermal gradient. The efficiency of a TE material for power generation and cooling is determined by the dimensionless Figure of Merit (ZT): ZT = S(exp. 2)sigmaT/κ: where S is the Seebeck coefficient, sigma is the electrical conductivity, T is the absolute temperature, and κ is the thermal conductivity. The parameters are not physically independent, but intrinsically coupled since they are a function of the transport properties of electrons. Traditional research on TE materials has focused on synthesizing bulk semiconductor-type materials that have low thermal conductivity and high electrical conductivity affording ZT values of 1. The optimization of the σ/κ ratio is difficult to achieve using current material formats, as these material constants are complementary. Recent areas of research are focusing on using nanostructural artifacts that introduce specific dislocations and boundary conditions that scatter the phonons. This disrupts the physical link between thermal (phonon) and electrical (electron) transport. The result is that κ is decreased without decreasing σ. These material formats give ZT values of up to 2 which represent approximately 18% energy gain from waste heat recovery. The next challenge in developing the next generation of TE materials with superior performance is to tailor the interconnected thermoelectric physical parameters of the material system. In order to approach this problem, the fundamental physics of each parameter S, sigma, and κ need to be physically understood in their context of electron/phonon interaction for the construction of new high ZT thermoelectric devices. Is it possible to overcome the physical limit imposed by of the effect of phonon lattice oscillation and energetic electrons towards thermal conductivity? Is the Seebeck coefficient, based on the difference in voltage over temperature gradient ( deltaV/deltaT), an intrinsic parameter of each material? All these parameters were manipulated using nano-bridge and twin-lattice structural concepts at the NASA Langley Research Center. This talk will review the current trend of TE research to optimize the ZT and discuss about new approaches on increasing ZT within functional limits of each parameter.

Kim, Hyun Jung↗

Origins of enhanced thermoelectric power factor in topologically insulating Bi{sub 0.64}Sb{sub 1.36}Te{sub 3} thin films

In this research, we report the enhanced thermoelectric power factor in topologically insulating thin films of Bi{sub 0.64}Sb{sub 1.36}Te{sub 3} with a thickness of 6–200 nm. Measurements of scanning tunneling spectroscopy and electronic transport show that the Fermi level lies close to the valence band edge, and that the topological surface state (TSS) is electron dominated. We find that the Seebeck coefficient of the 6 nm and 15 nm thick films is dominated by the valence band, while the TSS chiefly contributes to the electrical conductivity. In contrast, the electronic transport of the reference 200 nm thick film behaves similar to bulk thermoelectric materials with low carrier concentration, implying the effect of the TSS on the electronic transport is merely prominent in the thin region. The conductivity of the 6 nm and 15 nm thick film is obviously higher than that in the 200 nm thick film owing to the highly mobile TSS conduction channel. As a consequence of the enhanced electrical conductivity and the suppressed bipolar effect in transport properties for the 6 nm thick film, an impressive power factor of about 2.0 mW m{sup −1} K{sup −2} is achieved at room temperature for this film. Further investigations of the electronic transport properties of TSS and interactions between TSS and the bulk band might result in a further improved thermoelectric power factor in topologically insulating Bi{sub 0.64}Sb{sub 1.36}Te{sub 3} thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of dynamo magnetic fields in the primordial solar nebula

The present treatment of dynamo-generated magnetic fields in the primordial solar nebula proceeds in view of the ability of the combined action of Keplerian rotation and helical convention to generate, via alpha-omega dynamo, large-scale magnetic fields in those parts of the nebula with sufficiently high, gas-and magnetic field coupling electrical conductivity. Nebular gas electrical conductivity and the radial distribution of the local dynamo number are calculated for both a viscous-accretion disk model and the quiescent-minimum mass nebula. It is found that magnetic fields can be easily generated and maintained by alpha-omega dynamos occupying the inner and outer parts of the nebula.

Stepinski, Tomasz F.↗

Electrodes mitigating effects of defects in organic electronic devices

A compound electrode for organic electronic devices comprises a thin first layer of a first electrically conducting material and a second electrically conducting material disposed on the first layer. In one embodiment, the second electrically conducting material is formed into a plurality of elongated members. In another embodiment, the second material is formed into a second layer. The elongated members or the second layer has a thickness greater than that of the first layer. The second layer is separated from the first layer by a conducting material having conductivity less than at least the material of the first layer. The compound electrode is capable of mitigating adverse effects of defects, such as short circuits, in the construction of the organic electronic devices, and can be included in light-emitting or photovoltaic devices.

47 OTHER INSTRUMENTATION↗

Tuning the Conductivity of Hexa-Zirconium(IV) Metal–Organic Frameworks by Encapsulating Heterofullerenes

Electrical conductivity in metal–organic frameworks (MOFs) has a great potential for energy storage applications and electrocatalysis. Zirconium-based MOFs such as NU-901 and NU-1000 have a low electrical conductivity due to the redox innocence of Zr–oxo bonds. Recently, it has been shown that the electrical conductivity of NU-901 can be increased by 11 orders of magnitude by physically encapsulating fullerene (C 60 ) in its diamond pore. This effect is due to the host–guest interaction between the electron-rich 1,3,6,8-tetrakis(p-benzoate)pyrene (TBAPy 4– ) organic linkers of NU-901 (host) and the electron-poor fullerene (guest). Herein, we used density functional theory to study heterofullerene (C 59 X; X = B, Al, Ga, In, Si, Ge, and Sn) encapsulation in NU-901. Furthermore, our study suggests that encapsulated heterofullerenes enhance the electrical conductivity of the NU-901 MOF even further than C 60 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method and Apparatus for Obtaining a Precision Thickness in Semiconductor and Other Wafers

A method and apparatus for processing a wafer comprising a material selected from an electrical semiconducting material and an electrical insulating material is presented. The wafer has opposed generally planar front and rear sides and a peripheral edge, wherein said wafer is pressed against a pad in the presence of a slurry to reduce its thickness. The thickness of the wafer is controlled by first forming a recess such as a dimple on the rear side of the wafer. A first electrical conducting strip extends from a first electrical connection means to the base surface of the recess to the second electrical connector. The first electrical conducting strip overlies the base surface of the recess. There is also a second electrical conductor with an electrical potential source between the first electrical connector and the second electrical connector to form. In combination with the first electrical conducting strip, the second electrical conductor forms a closed electrical circuit, and an electrical current flows through the closed electrical circuit. From the front side of the wafer the initial thickness of the wafer is reduced by lapping until the base surface of the recess is reached. The conductive strip is at least partially removed from the base surface to automatically stop the lapping procedure and thereby achieve the desired thickness.

Okojie, Robert S.↗

Parallel Infrastructure Modeling and Inversion Module for E4D

Electrical resistivity tomography ERT is a method of imaging the electrical conductivity of the subsurface. Electrical conductivity is a useful metric for understanding the subsurface because it is governed by geomechanical and geochemical properties that drive subsurface systems. ERT works by injecting current into the subsurface across a pair of electrodes, and measuring the corresponding electrical potential response across another pair of electrodes. Many such measurements are strategically taken across an array of electrodes to produce an ERT data set. These data are then processed through a computationally demanding process known as inversion to produce an image of the subsurface conductivity structure that gave rise to the measurements. Data can be inverted to provide 2D images, 3D images, or in the case of time-lapse 3D imaging, 4D images. ERT is generally not well suited for environments with buried electrically conductive infrastructure such as pipes, tanks, or well casings, because these features tend to dominate and degrade ERT images. This reduces or eliminates the utility of ERT imaging where it would otherwise be highly useful for, for example, imaging fluid migration from leaking pipes, imaging soil contamination beneath leaking subsurface tanks, and monitoring contaminant migration in locations with dense network of metal cased monitoring wells. The location and dimension of buried metallic infrastructure is often known. If so, then the effects of the infrastructure can be explicitly modeled within the ERT imaging algorithm, and thereby removed from the corresponding ERT image. However, there are a number of obstacles limiting this application. 1) Metallic infrastructure cannot be accurately modeled with standard codes because of the large contrast in conductivity between the metal and host material. 2) Modeling infrastructure in true dimension requires the computational mesh to be highly refined near the metal inclusions, which increases computational demands. 3) The ERT imaging algorithm requires specialized modifications to accommodate high conductivity inclusions within the computational mesh. The solution to each of these challenges was implemented within E4D (formerly FERM3D), which is a parallel ERT imaging code developed at PNNL (IPID #30249). The infrastructure modeling module implement in E4D uses a method of decoupling the model at the metallic interface(s) boundaries, into several well posed sub-problems (one for each distinct metallic inclusion) that are subsequently solved and recombined to form the global solution. The approach is based on the immersed interface method, with has been applied for similar problems in other fields (e.g. semiconductor industry). Comparisons to analytic solutions have shown the results to be very accurate, addressing item 1 above. The solution is implemented about an unstructured mesh, which enables arbitrary shapes to be efficiently modelled, thereby addressing item 2 above. In addition, the algorithm is written in parallel and shows excellent scalability, which also addresses equation 2 above. Finally, because only the boundaries of metallic inclusions are modeled, there are no high conductivity cells within the modeling mesh, and the problem described by item 3 above is no longer applicable.

Johnson, TimC.↗

A study of the oriented composites with the conductive segregated structure obtained via solid-phase processing of the UHMWPE reactor powder mixed with the carbon nanofillers

Electrically conductive oriented polymer nano-composites of different compositions, based on the reactor powder of ultra-high-molecular-weight polyethylene (UHMWPE) with a special morphology, filled with particles of nanostructured graphite (NG), multi-walled carbon nanotubes (MWCNTs), and electrically conductive carbon black (CB), were investigated. Polymer composites were obtained via compaction of the mechanical mixture of the polymer and filler powder, followed by uniaxial deformation of the material under homogeneous shear (HS) conditions (all of the processing stages were conducted at room temperature). Resulted composites possess a high tensile strength, high level of the electrical conductivity and low percolation threshold, owing it to the formation of the segregated conductive structure, The influence of the type of nanosized carbon filler, degree of the deformation under HS condition, temperature and etc. on the electrical conductivity and mechanical properties of strengthened conductive composites oriented under homogeneous shear conditions was investigated. Changes in the electrical conductivity of oriented composite materials during reversible “tension–shrinkage” cycles along the orientation axis direction were studied. A theoretical approach, describing the process of transformation of the conductive system as a response on polymer phase deformation and volume change, was proposed, based on the data received from the analysis of the conductivity behavior during the uniaxial deformation and thermal treatment of composites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Inorganic “Conductive Glass” Approach to Rendering Mesoporous Metal–Organic Frameworks Electronically Conductive and Chemically Responsive

A representative mesoporous metal–organic-framework (MOF) material, NU-1000, has been rendered electronically conductive via a robust inorganic approach that permits retention of MOF crystallinity and porosity. The approach is based on condensed-phase grafting of molecular tin species onto the MOF nodes via irreversible reaction with hydroxyl and aqua ligands presented at the node surface, a self-limiting process termed solvothermal installation (of metal ions) in MOFs (SIM, a solution-phase analog of atomic layer deposition in MOFs). Treatment of the modified MOF with aerated steam at 120 °C converts the grafted tin molecules to tetratin(IV)oxy clusters, with the clusters being sited between insulating pairs of zirconia-like nodes (the zirconium component being key to endowing the parent material with requisite chemical and thermal stability). By introducing new O–H presenting ligands on the modified-MOF node, the high-temperature steam step additionally serves to reset the material to reactive form, thus enabling a second self-limiting tin-grafting step to be run (and after further steam treatment, enabling a third). Difference-envelop-density (DED) analyses of synchrotron-derived X-ray scattering data, with and without installed tin species, show that the clusters formed after one cycle are spatially isolated, but that repetitive SIM cycling adds metal and oxygen ions in a way that enshrouds nodes, links clusters, and yields continuous one-dimensional strands of oxy-tin(IV), oriented exclusively along the c axis of the MOF. Two-probe conductivity measurements show that the parent MOF and the version containing isolated oxy-tin(IV) clusters are electrically insulating, but that the versions featuring continuous strands show an electrical conductivity of 1.8 × 10–7 S/cm after three Sn-SIM cycles. When combined with interdigitated microelectrodes, the solvent-free and conductive-glass-modified material (three Sn-SIM cycles) displays a substantial and persistent increase in electrical conductivity during exposure to 5% H2, indicating a role for dissociated H2 as an electronic dopant. The increase can be repetitively reversed by alternating H2 with air, illustrating the ability of the conductive MOF to function as a resistive sensor for H2 and suggesting further potential applications that may capitalize on the combination of high volumetric surface area, high mesoporosity, high chemical and thermal stability, and significant electrical conductivity.

bio-inspired↗

Mechanism of direct current electrical charge conduction in p-toluenesulfonate doped polypyrrole/carbon composites

Polypyrrole/carbon (PPy/C) composites have been synthesized using varying concentration of p-toluenesulfonate (pTS) dopant by surface initiated in-situ chemical oxidative polymerization. The synthesis and influence of pTS on the structure of the PPy/C composites are confirmed by Fourier transform infrared studies and the morphological features have been examined by scanning electron microscopy. X-ray photoelectron spectroscopy, employed to examine the surface composition and doping level of these composites, confirms the anionic doping into the polymer backbone. Electron spin resonance measurement has been carried out on these samples to identify the nature of the charge carriers and their concentration at different doping levels. The dc electrical conductivity of these composites has been measured in the temperature range ∼10–305 K. The observed results have been analyzed in the framework of existing theoretical models. Different Mott's parameters, such as characteristic temperature (T{sub 0}), density of states at the Fermi level (N(E{sub F})), average hopping distance (R), and average hopping energy (W), evaluated from dc conductivity data supports the applicability of Mott's three dimensional variable range hopping mechanism in this system.

36 MATERIALS SCIENCE↗

The effect of filler aspect ratio on the electromagnetic properties of carbon-nanofibers reinforced composites

The effect of filler aspect ratio on the electromagnetic properties of epoxy-amine resin reinforced with carbon nanofibers is here investigated. A heat treatment at 2500 °C of carbon nanofibers seems to increase their aspect ratio with respect to as-received ones most likely due to a lowering of structural defects and the improvement of the graphene layers within the dixie cup conformation. These morphological differences revealed by Raman's spectroscopy and scanning electron microscopy analyses may be responsible for the different electrical properties of the resulting composites. The DC characterization of the nanofilled material highlights an higher electrical conductivity and a lower electrical percolation threshold for the heat-treated carbon nanofibers based composites. In fact, the electrical conductivity is about 0.107 S/m and 1.36 × 10{sup −3} S/m for the nanocomposites reinforced with heat-treated and as received fibers, respectively, at 1 wt. % of nanofiller loading, while the electrical percolation threshold falls in the range [0.05–0.32]wt. % for the first nanocomposites and above 0.64 wt. % for the latter. Moreover, also a different frequency response is observed since the critical frequency, which is indicative of the transition from a resistive to a capacitive-type behaviour, shifts forward of about one decade at the same filler loading. The experimental results are supported by theoretical and simulation studies focused on the role of the filler aspect ratio on the electrical properties of the nanocomposites.

36 MATERIALS SCIENCE↗

Current-conducting properties of paper consisting of multiwall carbon nanotubes

Electrical conductivity {sigma}(T) of the paper consisting of multiwalled carbon nanotubes (MWCNTs) is studied in the temperature range 4.2-295 K, and its magnetoresistivity {rho}(B) at various temperatures in magnetic fields up to 9 T is analyzed. The temperature dependence of the paper electrical conductivity {sigma}(T) exhibits two-dimensional quantum corrections to the conductivity below 10 K. The dependences of negative magnetoresistivity {rho}(B) measured at various temperatures are used to estimate the wavefunction phase breakdown length L{sub {phi}} of conduction electrons and to obtain the temperature dependence L{sub {phi}} = constT{sup -p/2}, where p Almost-Equal-To 1/3. Similar dependences of electrical conductivity {sigma}(T), magnetoresistivity {rho}(B), and phase breakdown length L{sub {phi}}(T) are detected for the initial MWCNTs used to prepare the paper.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗