Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Efficiency maximization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Large eddy simulation of wind farm performance in horizontally and vertically staggered layouts

This numerical investigation employs Large Eddy Simulation (LES) coupled with Actuator Disk Model (ADM) to evaluate wind farm layout optimization strategies. The study presents a systematic analysis of aligned, horizontal staggering, vertical staggering, and mixed (combination of horizontal and vertical) staggering configurations, aiming to establish optimal design parameters for enhanced power production. The investigation examines key performance metrics including mean velocity distributions, turbulence intensity characteristics, and power generation efficiency. Results demonstrate better performance of both horizontal and vertical staggering patterns compared to conventional aligned configurations, with horizontal staggering exhibiting notably higher power output than vertical arrangements. Our findings also suggest that mixed configurations, incorporating both horizontal and vertical staggering, can offer optimal performance characteristics. As a result, this research advances the understanding of wake interactions in complex wind farm layouts and provides design guidelines for maximizing wind farm power generation efficiency through strategic turbine positioning.

17 WIND ENERGY↗

Target Diagnostic Menu Lawrence Livermore National Laboratory SYSM-5620: Design Thinking and Systems Engineering

Target Diagnostic’s Engineering Science (TDES) currently supports over 80 diagnostic systems, all of which draw from a fixed budget that covers staff time and procurement. As the division continues to add new diagnostics, demand on these limited resources increases, yet the budget remains unchanged. Shot Responsible Individuals (RIs) have unrestricted freedom to select any number or type of diagnostics for each experiment, often by copying previous shot configurations with only minor modifications. This practice makes it easy to generate new shots but does not encourage critical evaluation of diagnostic necessity. As a result, many diagnostics are routinely included in a shot without a clear justification, and in practice, much of the data collected is not analyzed. The ever-growing arsenal of diagnostics also increases the burden on TDES personnel, requiring more staff for support, maintenance, and service. This environment creates challenges in focusing resources on diagnostics that provide the greatest value to the NIF mission and raises concerns about the continued justification for maintaining all existing systems. The static TDES budget cannot sustain the ongoing growth in demand for new diagnostic systems. Shot RIs currently face no constraints on the number or type of diagnostics they assign to each experiment, often defaulting to previous configurations without critically assessing the necessity of each diagnostic. This results in the routine inclusion of diagnostics whose data may not be analyzed or may no longer directly support the NIF mission. Consequently, TDES is required to maintain and support an expanding set of diagnostics, straining limited resources and risking inefficient use of staff and funding. There is a need for TDES to efficiently allocate limited resources by establishing a process that requires shot RIs to critically evaluate and justify the inclusion of each diagnostic in their experiments. This process should discourage the routine, unexamined inclusion of diagnostics, support the identification of underutilized or obsolete systems, and ensure that only those diagnostics providing the greatest value to the NIF mission are maintained and supported. Ultimately, this approach must enable TDES to operate within budget constraints while maximizing scientific impact and operational efficiency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Waste Heat Recovery System for Light Duty Diesel Engines

In order to achieve proposed fuel economy requirements, engines must make better use of the available fuel energy. Regardless of how efficient the engine is, there will still be a significant fraction of the fuel energy that is rejected in the exhaust and coolant streams. One viable technology for recovering this waste heat is an Organic Rankine Cycle. This cycle heats a working fluid using these heat streams and expands the fluid through a turbine to produce shaft power. The present work was the development of such a system applied to a light duty diesel engine. This lab demonstration was designed to maximize the peak brake thermal efficiency of the engine, and the combined system achieved an efficiency of 44.4%. The design of the system is discussed, as are the experimental performance results. The system potential at typical operating conditions was evaluated to determine the practicality of installing such a system in a vehicle.

33 ADVANCED PROPULSION SYSTEMS↗

An efficient approach to ab initio Monte Carlo simulation

We present a Nested Markov chain Monte Carlo (NMC) scheme for building equilibrium averages based on accurate potentials such as density functional theory. Metropolis sampling of a reference system, defined by an inexpensive but approximate potential, was used to substantially decorrelate configurations at which the potential of interest was evaluated, thereby dramatically reducing the number needed to build ensemble averages at a given level of precision. The efficiency of this procedure was maximized on-the-fly through variation of the reference system thermodynamic state (characterized here by its inverse temperature β{sup 0}), which was otherwise unconstrained. Local density approximation results are presented for shocked states of argon at pressures from 4 to 60 GPa, where—depending on the quality of the reference system potential—acceptance probabilities were enhanced by factors of 1.2–28 relative to unoptimized NMC. The optimization procedure compensated strongly for reference potential shortcomings, as evidenced by significantly higher speedups when using a reference potential of lower quality. The efficiency of optimized NMC is shown to be competitive with that of standard ab initio molecular dynamics in the canonical ensemble.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generation of low-frequency radiation by dense hot plasma under pondermotive action of a short laser pulse

The theory of the generation of low-frequency radiation under the pondermotive action of a femtosecond laser pulse on dense hot plasma is developed. It is shown that, at fairly high plasma temperatures, when electron-electron collisions are rare and the low-frequency field is excited under conditions of the anomalous skin effect, the generation efficiency can be close to maximal. The optimal generation conditions are achieved if the carrier frequency of the laser pulse is close to the plasma frequency and the pulse is tightly focused. Under irradiation by pulses with durations of tens to hundreds femtoseconds, terahertz radiation is generated in a broad angular range.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a lab-scale, high-resolution, tube-generated X-ray computed-tomography system for three-dimensional (3D) materials characterization

The design and construction of a modular high resolution X-ray computed tomography (XCT) system is highlighted in this paper. The design approach is detailed for meeting a specified set of instrument performance goals tailored towards experimental versatility and high resolution imaging. The XCT tool is unique in the detector and X-ray source design configuration, enabling control in the balance between detection efficiency and spatial resolution. The system package is also unique: The sample manipulation approach implemented enables a wide gamut of in situ experimentation to analyze structure evolution under applied stimulus, by optimizing scan conditions through a high degree of controllability. The component selection and design process is detailed: Incorporated components are specified, custom designs are shared, and the approach for their integration into a fully functional XCT scanner is provided. Custom designs discussed include the dual-target X-ray source cradle which maintains position and trajectory of the beam between the two X-ray target configurations with respect to a scintillator mounting and positioning assembly and the imaging sensor, as well as a novel large-format X-ray detector with enhanced adaptability. The instrument is discussed from an operational point of view, including the details of data acquisition and processing implemented for 3D imaging via micro-CT. The performance of the instrument is demonstrated on a silica-glass particle/hydroxyl-terminated-polybutadiene (HTPB) matrix binder PBX simulant. Post-scan data processing, specifically segmentation of the sample's relevant microstructure from the 3D reconstruction, is provided to demonstrate the utility of the instrument. - Highlights: • Custom built X-ray tomography system for microstructural characterization • Detector design for maximizing polychromatic X-ray detection efficiency • X-ray design offered for maximizing X-ray flux with respect to imaging resolution • Novel lab-scale XCT data acquisition and data processing methods • 3D characterization of glass-bead mock plastic-bonded-explosive stimulant.

36 MATERIALS SCIENCE↗

Development of Training Programs to Optimize Planetary Ambulation

Astronauts experience disturbances in functional mobility following their return to Earth due to adaptive responses that occur during exposure to the microgravity conditions of space flight. Despite significant time spent performing in-flight exercise routines, these training programs have not been able to mitigate postflight alterations in postural and locomotor function. Therefore, the goal of our two inter-related projects (NSBRI-ground based and ISS flight study, "Mobility") is to develop and test gait training programs that will serve to optimize functional mobility during the adaptation period immediately following space flight, thereby improving the safety and efficiency of planetary ambulation. The gait training program entails manipulating the sensory conditions of treadmill exercise to systematically challenge the balance and gait control system. This enhances the overall adaptability of locomotor function enabling rapid reorganization of gait control to respond to ambulation in different gravitational environments. To develop the training program, we are conducting a series of ground-based studies evaluating the training efficacy associated with variation in visual flow, body loading, and support surface stability during treadmill walking. We will also determine the optimal method to present training stimuli within and across training sessions to maximize both the efficacy and efficiency of the training procedure. Results indicate that variations in both visual flow and body unloading during treadmill walking leads to modification in locomotor control and can be used as effective training modalities. Additionally, the composition and timing of sensory challenges experienced during each training session has significant impact on the ability to rapidly reorganize locomotor function when exposed to a novel sensory environment. We have developed the capability of producing support surface variation during gait training by mounting a treadmill on a six-degree-of-freedom motion device. This hardware development will allow us to evaluate the efficacy of this type of training in conjunction with variation in visual flow and body unloading.

Bloomberg, J. J.↗

ESS-DIVE reporting format for leaf-level gas exchange data and metadata

Here we present documentation of the ESS-DIVE reporting format for leaf-level gas exchange data and metadata. This reporting format provides guidance to data contributors on how to store data to maximize their discoverability, facilitate their efficient reuse, and add value to individual datasets. For data users, the reporting format will better allow data repositories to optimize data search and extraction, and more readily integrate similar data into harmonized synthesis products. The reporting format specifies data table variable naming and unit conventions, as well as metadata characterizing experimental conditions and protocols. For common data types that were the focus of this initial version of the reporting format, i.e., survey measurements, dark respiration, carbon dioxide and light response curves, and parameters derived from those measurements, we took a further step of defining required additional data that would maximize the potential reuse of those data types. To aid data contributors and the development of data ingest tools by data repositories we provided a translation table comparing the outputs of common gas exchange instruments. The reporting format presented here is intended to form a foundation for future development that will incorporate additional data types and variables as gas exchange systems and measurement approaches advance in the future. The reporting format documentation is maintained and updated on the ESS-DIVE Community Space GitHub. This data package is the first published version of this reporting format, and comprises a zip file of the complete content of https://github.com/ess-dive-community/essdive-leaf-gas-exchange v1.0. The zip contains the reporting format description, guidelines, variable tables and instructions in GitHub markdown language (*.md) and 2 metadata templates as spreadsheets with drop down options (*.xlsx files, also function in GoogleSheets).

54 ENVIRONMENTAL SCIENCES↗

New Whole-House Solutions Case Study: Fort Devens: Cold Climate Market-Rate Townhomes Targeting HERS Index of 40, Harvard, Massachusetts

Achieving aggressive energy efficiency targets requires tight coordination and clear communication among owners, designers, builders, and subcontractors. For this townhome project, MassDevelopment, the quasi-governmental agency owner, selected Metric Development of Boston, teaming with Building America team Consortium for Advanced Residential Buildings (CARB) and Cambridge Seven Architects, to build very high performing market-rate homes. Fort Devens is part of a decommissioned army base in working-class Harvard, Massachusetts, approximately one hour northwest of Boston. The team proposed 12 net zero energy-ready townhomes that were also designed to achieve a Home Energy Rating System (HERS) Index Score of 41 before adding renewables. The team carefully planned the site to maximize solar access, daylighting, and efficient building forms.

air tight envelope↗

Hollow fiber adsorbents for CO{sub 2} removal from flue gas

The nation's pulverized coal infrastructure is aging, and implementation of current retrofit postcombustion capture methods is extremely expensive. This paper describes a technology based on hollow polymeric fibers with sorbent particles embedded in the porous fiber wall to enable postcombustion CO{sub 2} capture via a rapid temperature swing adsorption (RTSA) system. The system takes advantage of the hollow fiber morphology by passing cooling water through the bores during sorption to maximize sorption capacities and steam through the bores during desorption to desorb CO{sub 2} efficiently. The thin-walled hollow fibers offer the advantage of rapid heat and mass transport. To avoid mass transfer between the core and the fiber sheath, a dense lumen layer is used on the interior of the fiber wall. This system has advantages over competing technologies. Specifically, the fiber sorbent contactor minimizes flue gas pressure drop across the bed, while maximizing sorption efficiencies via rapid thermal cycles and low regenerative thermal requirements.

01 COAL, LIGNITE, AND PEAT↗

Fort Devens: Cold Climate Market-Rate Townhomes Targeting HERS Index of 40, Harvard, Massachusetts (Fact Sheet)

Achieving aggressive energy efficiency targets requires tight coordination and clear communication among owners, designers, builders, and subcontractors. For this townhome project, MassDevelopment, the quasi-governmental agency owner, selected Metric Development of Boston, teaming with the U.S. Department of Energy (DOE) Consortium for Advanced Residential Buildings (CARB) and Cambridge Seven Architects, to build very high performing market-rate homes. Fort Devens is part of a decommissioned army base in working-class Harvard, Massachusetts, approximately one hour northwest of Boston. The team proposed 12 net zero energy-ready townhomes, meaning that the application of renewable energy systems would result in annual net zero energy use in the homes. The homes were also designed to achieve a Home Energy Rating System (HERS) Index Score of 41 before adding renewables. For this project, CARB drew on its experience working with Rural Development Inc. on a series of affordable townhomes in northern Massachusetts. The team carefully planned the site to maximize solar access, daylighting, and efficient building forms. The basic strategy was to design a very efficient thermal enclosure while minimizing incremental cost increases compared with standard construction. Using BEopt modeling software, the team established the requirements of the enclosure and investigated multiple assembly options. They settled on double-wall construction with dense-pack cellulose fill. High performance vinyl windows (U-0.24, solar heat gain coefficient [SHGC]-0.22), a vented R-59 attic, and exceptional air sealing completed the package.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Al x In 1-x P LEDs with II-VI Cladding Layers for Efficient Red and Amber Emission. Final Scientific & Technical Report

Realizing solid state lighting systems with high efficiency and enhanced functionality will require the adoption of color-mixing (cm-LEDs) architectures combining highly efficient red, green, blue and amber light emitting diodes. Already, the hybrid architectures (hy-LEDs) pair phosphor-converted wide bandgap nitride LEDs with (Al x Ga 1-x ) 0.51 In 0.49 P red LEDs to improve the emission spectrum and reduce losses in the infrared. However, the efficiencies of (Al x Ga 1-x ) 0.51 In 0.49 P red and amber LEDs are still too low to truly enable these approaches. The DOE Solid-State Lighting R&D Plan highlights red and amber LED improvement as a long-term research goal. Excessive electron leakage out of the cladding layers, in particular, leads to strong thermal droop and red LED efficiencies of ~25% at normal operating temperatures. The typical device architecture for red and amber LEDs is based on indirect bandgap (Al y Ga 1-y ) 0.51 In 0.49 P cladding layers used to confine injected electrons and holes within a lower, direct bandgap (Al x Ga 1-x ) 0.51 In 0.49 P light-emitting active layer (x < y). The challenge with this approach is that the electron confinement is limited and decreases as the emission wavelength is shortened. Hence, thermal droop and overall device efficiency are very poor for amber LEDs. Innovative solutions to this problem must be sought through the use of new semiconductor materials and structures that will increase electron confinement. We plan to develop Al x In 1-x P LEDs with a II-VI semiconductor electron cladding layer to greatly increase the carrier confinement. Such an approach has the potential to improve red and amber LED efficiency, temperature stability, and light extraction. Al x In 1-x P active layers provide high direct bandgap energies needed to reach amber wavelengths without detrimental internal losses. ZnSe-based alloys are attractive candidates for the electron cladding layer because they can be engineered to provide high conduction band energies relative to the Al x In 1-x P active layer while maintaining roughly the same lattice constant. The lower index of refraction of the II-VI cladding layer will also aid light extraction. While extended defects have largely precluded the use of II-VI semiconductors as the light emitting layer in LEDs and lasers, the effects of these defects on device performance can be mitigated by limiting the use of II-VI materials to the thin, heavily doped cladding layer. Proposed research will focus on optimizing the quality of the Al x In 1-x P active layer and the heteropolar growth of the III-V/II-VI interface, tuning the II-VI cladding layer composition, and device design to maximize electron confinement and LED efficiency. Significant improvement in the performance of red and amber LEDs through this new approach is expected to advance the capabilities of next generation solid-state lighting technologies.

36 MATERIALS SCIENCE↗

Evaluation and Optimization of a Supercritical Carbon Dioxide Power Conversion Cycle for Nuclear Applications

There have been a number of studies involving the use of gases operating in the supercritical mode for power production and process heat applications. Supercritical carbon dioxide (CO2) is particularly attractive because it is capable of achieving relatively high power conversion cycle efficiencies in the temperature range between 550°C and 750°C. Therefore, it has the potential for use with any type of high-temperature nuclear reactor concept, assuming reactor core outlet temperatures of at least 550°C. The particular power cycle investigated in this paper is a supercritical CO2 Recompression Brayton Cycle. The CO2 Recompression Brayton Cycle can be used as either a direct or indirect power conversion cycle, depending on the reactor type and reactor outlet temperature. The advantage of this cycle when compared to the helium Brayton Cycle is the lower required operating temperature; 550°C versus 850°C. However, the supercritical CO2 Recompression Brayton Cycle requires an operating pressure in the range of 20 MPa, which is considerably higher than the required helium Brayton cycle operating pressure of 8 MPa. This paper presents results of analyses performed using the UniSim process analyses software to evaluate the performance of the supercritical CO2 Brayton Recompression Cycle for different reactor outlet temperatures. The UniSim model assumed a 600 MWt reactor power source, which provides heat to the power cycle at a maximum temperature of between 550°C and 750°C. The UniSim model used realistic component parameters and operating conditions to model the complete power conversion system. CO2 properties were evaluated, and the operating range for the cycle was adjusted to take advantage of the rapidly changing conditions near the critical point. The UniSim model was then optimized to maximize the power cycle thermal efficiency at the different maximum power cycle operating temperatures. The results of the analyses showed that power cycle thermal efficiencies in the range of 40 to 50% can be achieved.

42 ENGINEERING↗

Bandwidth-Efficient Communication through 225 MHz Ka-band Relay Satellite Channel

The communications and navigation space infrastructure of the National Aeronautics and Space Administration (NASA) consists of a constellation of relay satellites (called Tracking and Data Relay Satellites (TDRS)) and a global set of ground stations to receive and deliver data to researchers around the world from mission spacecraft throughout the solar system. Planning is underway to enhance and transform the infrastructure over the coming decade. Key to the upgrade will be the simultaneous and efficient use of relay transponders to minimize cost and operations while supporting science and exploration spacecraft. Efficient use of transponders necessitates bandwidth efficient communications to best use and maximize data throughput within the allocated spectrum. Experiments conducted with NASA's Space Communication and Navigation (SCaN) Testbed on the International Space Station provides a unique opportunity to evaluate advanced communication techniques, such as bandwidth-efficient modulations, in an operational flight system. Demonstrations of these new techniques in realistic flight conditions provides critical experience and reduces the risk of using these techniques in future missions. Efficient use of spectrum is enabled by using high-order modulations coupled with efficient forward error correction codes. This paper presents a high-rate, bandwidth-efficient waveform operating over the 225 MHz Ka-band service of the TDRS System (TDRSS). The testing explores the application of Gaussian Minimum Shift Keying (GMSK), 248-phase shift keying (PSK) and 1632- amplitude PSK (APSK) providing over three bits-per-second-per-Hertz (3 bsHz) modulation combined with various LDPC encoding rates to maximize throughput. With a symbol rate of 200 Mbaud, coded data rates of 1000 Mbps were tested in the laboratory and up to 800 Mbps over the TDRS 225 MHz channel. This paper will present on the high-rate waveform design, channel characteristics, performance results, compensation techniques for filtering and equalization, and architecture considerations going forward for efficient use of NASA's infrastructure.

space communications↗

Bandwidth-Efficient Communication through 225 MHz Ka-band Relay Satellite Channel

The communications and navigation space infrastructure of the National Aeronautics and Space Administration (NASA) consists of a constellation of relay satellites (called Tracking and Data Relay Satellites (TDRS)) and a global set of ground stations to receive and deliver data to researchers around the world from mission spacecraft throughout the solar system. Planning is underway to enhance and transform the infrastructure over the coming decade. Key to the upgrade will be the simultaneous and efficient use of relay transponders to minimize cost and operations while supporting science and exploration spacecraft. Efficient use of transponders necessitates bandwidth efficient communications to best use and maximize data throughput within the allocated spectrum. Experiments conducted with NASA's Space Communication and Navigation (SCaN) Testbed on the International Space Station provides a unique opportunity to evaluate advanced communication techniques, such as bandwidth-efficient modulations, in an operational flight system. Demonstrations of these new techniques in realistic flight conditions provides critical experience and reduces the risk of using these techniques in future missions. Efficient use of spectrum is enabled by using high-order modulations coupled with efficient forward error correction codes. This paper presents a high-rate, bandwidth-efficient waveform operating over the 225 MHz Ka-band service of the TDRS System (TDRSS). The testing explores the application of Gaussian Minimum Shift Keying (GMSK), 2/4/8-phase shift keying (PSK) and 16/32- amplitude PSK (APSK) providing over three bits-per-second-per-Hertz (3 b/s/Hz) modulation combined with various LDPC encoding rates to maximize through- put. With a symbol rate of 200 M-band, coded data rates of 1000 Mbps were tested in the laboratory and up to 800 Mbps over the TDRS 225 MHz channel. This paper will present on the high-rate waveform design, channel characteristics, performance results, compensation techniques for filtering and equalization, and architecture considerations going forward for efficient use of NASA's infrastructure.

transmitters receivers↗

Decoupling Thin Film CdTe Growth from Packaging: Toward Record Specific Power in Low Cost Polycrystalline PV

There are critical material and scientific barriers to producing high efficiency, flexible, lightweight solar cells that maximize specific power in a cost-effective manner. III-V solar cells have produced the highest specific power of any photovoltaic technology due to their extremely high efficiency, however, they are also among the most expensive to produce. This work explores a novel lift-off approach with thin-film solar cells, particularly CdTe, to achieve high specific power at low costs. Thin-film devices can be delaminated from their heavy, glass growth substrates post-growth by exploiting a mismatch in coefficient of thermal expansion between the two. This allows thin-film PV to be decoupled from high temperature growth requirements and repackaged using lightweight materials. In this work we evaluate different materials and approaches for achieving large area delamination of CdTe films from their glass superstrates. It is found that epoxy bonded to a rigid handle provides robust and reproducible delamination at the TCO/CdS interface upon submersion in liquid nitrogen. Following delamination, a transparent front contact is re-deposited and selectively etched to expose the back contact to produce a functioning device. Effects of delamination and contributions to device functionality from CdCl 2 and CdS layers are discussed. Reproducible delamination of high efficiency, thin-film solar cells over large areas will enable work to further improve device efficiency through passivation and reconstruction of the previously buried interface between the transparent contact and CdS.

14 SOLAR ENERGY↗

Final Report: Scale-up of Algal Biofuel Production Using Waste Nutrients

Renewable fuels can be more environmentally friendly than conventional fuels and can be produced locally, supporting energy independence. Liquid renewable fuels are of special interest due to their high energy density. Algae are a promising prospective feedstock for low carbon intensity liquid biofuels, due to their high productivity and potential for high lipid or carbohydrate content. Their ability to grow on wastewater and waste nutrients and on non-arable land are cost and sustainability advantages. The organic matter content of wastewater promotes mixotrophic and/or heterotrophic growth of both algae and bacteria, boosting biomass productivity further. However, economic and technologic challenges persist that prevent the scale-up of algal biofuels to commercial relevance. These challenges include algal harvesting, drying, dewatering, and the conversion of algal biomass to usable fuels (Hannon et al 2010, Dunlap and Shaw 2009, Pienkos et al. 2009). The US Department of Energy (DOE) Bioenergy Technologies Office (BETO) supports research to overcome these challenges and outlines the research and development goals for algal biofuels in their Multi-Year Program Plan (MYPP). The long-term goals of the MYPP for algal biofuels research are briefly as follows: develop the domestic ability to produce algal biofuels at a scale of 5 billion gallons per year (BGY) by 2030 and demonstrate technologies that produce biofuel intermediates from algae at a cost of $3/gallon of gasoline equivalent (GGE) by 2022 (BETO MYPP 2016). This research reported herein was funded to investigate methods of meeting an intermediate milestone of 2,500 gallons of biofuel intermediate per acre per year for a non-integrated process by improving algal productivity, harvesting efficiency, and conversion to biofuel intermediates. Use of wastewater and wastewater nutrients was a key distinguishing characteristic of this project. In pursuit of 2,500 gallons of biofuel intermediate (BFI) per acre per year, California Polytechnic State University, San Luis Obispo (Cal Poly) sought to develop the capability to produce biofuel intermediates from microalgae grown on municipal wastewater at a 20-acre algae-based wastewater treatment facility in Delhi, California (37.43° N), which includes 7 acres of raceway ponds. Coupling algal biofuel production with wastewater treatment capitalizes on the abundant waste nutrients and carbon present in wastewater and reduces use of clean water in algal biorefinery systems. In this research, the performance of the full-scale wastewater treatment plant was characterized by measuring productivity, wastewater treatment performance, hydraulic characteristics, and energy consumption. Nine 1,000-L pilot raceways with CO2 addition were used in experiments to maximize productivity. Low-cost, energy-efficient algae bioflocculation and settling were monitored. Population genetics were monitored in an attempt to correlate taxa with superior productivity and/or settling. Algae-bacterial biomass was converted to biofuel intermediates via bench-scale hydrothermal liquefaction (HTL), and the resulting fuel quality was characterized. To develop rapid strain screening capabilities, a climate simulating photobioreactor (“LEAPS”) was developed and validated against outdoor raceways. A techno-economic analysis (TEA) and a lifecycle assessment (LCA) were performed to model process economics and sustainability. The major outcomes of this research included demonstration of 33 g/m2-day annual average algal-bacterial productivity in pilot raceways, and a biofuel intermediate yield of 0.35 g intermediate/g algae biomass via HTL, for a yield of 4,100 gallons BFI per acre per year, assuming a 90% harvest efficiency and ignoring other minor losses. This exceeded the project goal of 2,500 gallons of BFI per acre per year and nearly met the 2030 program goal, highlighting the promise of integrating wastewater treatment and biofuels production. The biocrude BFI produced by the process is refined to diesel and naphtha fuels. These fuels are normalized to the energy content of gasoline (gallons gasoline equivalent, GGE, for comparison to other fuels). Results from the TEA of the this complete “well-to-wheel” process demonstrated that, at a 400-ha scale, a minimum fuel selling price (MFSP) of $12.55/GGE, which could be decreased 57% to $7.14/GGE when including revenue from coupling the biofuel production with the co-products of wastewater treatment services and low carbon fuel credits from California and Federal programs. Due mainly to the high capital costs of thickener centrifuges and hydrothermal processing equipment, the fuel cost is sensitive to scale, with significantly lower costs expected for larger farms. In this research project, significant advances were made in improving raceway algal productivity and fuel production from algae biomass, while also improving process economics. These outcomes brought the algal biofuel technology closer to being a sustainable and marketable process. The remainder of this executive summary is organized into the following six primary project tasks: (1) to optimize biomass productivity for a selected strain at Delhi, (2) to maximize algal productivity and harvesting efficiency in Delhi pilot ponds, (3) a full-scale raceway hydraulic characterization, (4) biomass processing to biofuel intermediates, and (5) scale-up engineering analysis, modeling, and planning.

09 BIOMASS FUELS↗

Synergistic effects of chemical-free hydrothermal pretreatment on the recovery of cellulosic sugars and pectin from sugar mill-derived sugar beet pulp

Sugar mills processing sugar beet generate large amounts of sugar beet pulp (SBP), a carbohydrate-rich byproduct composed of 22–30% cellulose, 24–32 % hemicellulose, and 15-20% pectin. Mild, chemical-free hydrothermal pretreatment offers a promising approach to recover these compounds while minimizing pectin degradation, reducing chemical use, and lowering operating costs for value-added applications. This study evaluates the effects of chemical-free hydrothermal pretreatment on cellulosic sugars recovery and its synergy with subsequent pectin extraction under pretreatment conditions ranging from 80°C to 120°C for 15-45 min. Results show that increasing pretreatment severity preserved most glucans with 4% decrease in galacturonan content. Optimal pretreatment (100°C for 45 min) followed by enzymatic hydrolysis achieved the best glucose (95%) and pentose (74%) yields, while galacturonan remained concentrated in the residual solids. Subsequent citric acid extraction at 80°C for 3 hr and a solid-to-liquid ratio of 1:15 yielded up to 85% pectin, significantly lowering water, chemical, and energy requirements compared to conventional industrial extraction. The integration of mild hydrothermal pretreatment with enzymatic hydrolysis thus maximized sugar recovery and enabled efficient downstream pectin extraction without compromising product yields. These findings advance low-impact valorization strategies to reinforce SBP’s values in biorefinery.

09 - BIOMASS FUELS↗