Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Effect of three-pion unitarity on resonance poles from heavy meson decays

We study the final state interaction in 3{pi} decay of meson resonances at the Excited Baryon Analysis Center (EBAC) of JLab. We apply the dynamical coupled-channels formulation which has been extensively used by EBAC to extract N{sup *} information. The formulation satisfies the 3{pi} unitarity condition which has been missed in the existing works with the isobar models. We report the effect of the 3{pi} unitarity on the meson resonance pole positions and Dalitz plot.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of Ag additions on melt-spun RE2Fe14B microstructure and texture

Control of microstructure and texture is of critical importance in forming rare earth (RE)-iron-boron particulate suitable for anisotropic polymer-bonded permanent magnets and anisotropic sintered permanent magnets. In this study, the selected approach to controlling grain size, while maintaining texture, is through stabilization and refinement of directional growth in melt-spun ribbons. Varying concentrations of Ag were added to melt-spun ribbons of composition (Y0.55Nd0.45)2.2Fe14B1.1. Effects on microstructure and texture were observed through scanning electron microscopy (SEM) and x-ray diffraction (XRD). It was determined that Ag stabilized columnar growth (compared to alloys with no Ag added) with additions as small as 0.3 at. %, but the Ag also produced a unique texture in the ribbons. In RE-Fe-B ribbons without Ag, strong <00l> texture is observed at the free surface and a mechanism has been established. In all Ag-containing ribbons, the observed texture is canted to both the c- and a-axes, but the mechanism remains unclear.

36 MATERIALS SCIENCE↗

Effects of local defect growth in direct-drive cryogenic implosions on OMEGA

Spherically symmetric, low-adiabat (adiabat α ≲ 3) cryogenic direct-drive-implosion experiments on the OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1995)] yield less than 10% of the neutrons predicted in one-dimensional hydrodynamic simulations. Two-dimensional hydrodynamic simulations suggest that this performance degradation can be explained assuming perturbations from isolated defects of submicron to tens-of-micron scale on the outer surface or inside the shell of implosion targets. These defects develop during the cryogenic filling process and typically number from several tens up to hundreds for each target covering from about 0.2% to 1% of its surface. The simulations predict that such defects can significantly perturb the implosion and result in the injection of about 1 to 2 μg of the hot ablator (carbon-deuterium) and fuel (deuterium-tritium) materials from the ablation surface into the targets. Both the hot mass injection and perturbations of the shell reduce the final shell convergence ratio and implosion performance. The injected carbon ions radiatively cool the hot spot, reducing the fuel temperature, and further reducing the neutron yield. The negative effect of local defects can be minimized by decreasing the number and size of these defects and/or using more hydrodynamically stable implosion designs with higher shell adiabat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effects of Co-Ti co-doping on the magnetic, electrical, and magnetodielectric behaviors of M-type barium hexaferrites

Magnetic, electrical and magnetodielectric properties have been studied in Co-Ti co-doped M-type hexaferrite BaCo{sub x}Ti{sub x}Fe{sub 12-2x}O{sub 19} (x = 0 ∼ 4). With the incorporation of Co-Ti, both their ferromagnetic magnetization and coercivity have been greatly changed. The temperature dependent magnetization curve shows a apparent hump at around 420 K, likely in association with more complicated cycloidal spin ordering, which is closely related to ferroelectric polarization. Interestingly, a significantly enhancement in resistivity (∼3 orders in magnitude) can be obtained in co-doped samples (x > 2), which is beneficial for magnetoelectric properties. The magnetoelectric effect were examined by dielectric tunibility under external magnetic field, which shows apparent tunability up to ∼−3% for sample with x = 2 at 1T magnetic field, further supporting it is a room temperature single phase mutliferroic material.

36 MATERIALS SCIENCE↗

Effect of capping material on interfacial ferromagnetism in FeRh thin films

The role of the capping material in stabilizing a thin ferromagnetic layer at the interface between a FeRh film and cap in the nominally antiferromagnetic phase at room temperature was studied by x-ray magnetic circular dichroism in photoemission electron microscopy and polarized neutron reflectivity. These techniques were used to determine the presence or absence of interfacial ferromagnetism (FM) in films capped with different oxides and metals. Chemically stable oxide caps do not generate any interfacial FM while the effect of metallic caps depends on the element, showing that interfacial FM is due to metallic interdiffusion and the formation of a ternary alloy with a modified antiferromagnetic to ferromagnetic transition temperature.

36 MATERIALS SCIENCE↗

Effect of substitution of In for Co on magnetostructural coupling and magnetocaloric effect in MnCo{sub 1-x}In{sub x}Ge compounds

Effect of replacement of Co by In with larger atomic radius but fewer valence numbers on magnetostructural coupling and magnetocaloric effect is studied in MnCo{sub 1-x}In{sub x}Ge compounds. The substitution of Co by a small amount of In (1.5%–2%) can shift martensitic transformation T{sub stru} to lower temperature and make it overlap with Curie temperature T{sub C}. As a result, magnetostructural coupling is created and large entropy change (ΔS) takes place. Further increasing In content to x = 0.03 leads to decoupling, but the martensitic transition (T{sub stru} ∼ 249 K) is still close to the magnetic transition (T{sub c}{sup A} ∼ 269 K). As a result, two close ΔS peaks appear. Mechanism related to different large entropy change in the coupled and decoupled samples are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of interface oxygen content on magnetoelectric effect of epitaxial La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/BaTiO{sub 3} bilayer

The epitaxial La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/BaTiO{sub 3} (LSMO/BTO) bilayer films are grown on (001) oriented LaAlO{sub 3} substrate by pulsed laser deposition technique. The oxygen-rich interface is obtained through in-situ annealing process in oxygen, and the oxygen-deficient interface is obtained without the annealing process. The results show that the ferromagnetic properties of the LSMO film and the magnetoelectric effect (ME) of the bilayer films strongly correlate to the oxygen content at the interface of LSMO/BTO. The saturated magnetization and the ME voltage coefficient of the oxygen-rich bilayer film are higher than that of oxygen-deficient one. It suggests a more effective ME coupling at the LSMO/BTO interface, which are generated through not only the interface strain but also the spin polarized carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Collisional effects in the ion Weibel instability for two counter-propagating plasma streams

Experiments directed towards the study of the collisionless interaction between two counter-streaming plasma flows generated by high-power lasers are designed in such a way as to make collisions between the ions of the two flows negligibly rare. This is reached by making flow velocities v as high as possible and thereby exploiting the 1/v{sup 4} dependence of the Rutherford cross-section. At the same time, the plasma temperature of each flow may be relatively low so that collisional mean-free paths for the intra-stream particle collisions may be much smaller than the characteristic spatial scale of the unstable modes required for the shock formation. The corresponding effects are studied in this paper for the case of the ion Weibel (filamentation) instability. Dispersion relations for the case of strong intra-stream collisions are derived. It is shown that the growth-rates become significantly smaller than those stemming from a collisionless model. The underlying physics is mostly related to the increase of the electron stabilizing term. Additional effects are an increased “stiffness” of the collisional ion gas and the ion viscous dissipation. A parameter domain where collisions are important is identified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Humidity effects on tip-induced polarization switching in lithium niobate

In the last several decades, ferroelectrics have attracted much attention as perspective materials for nonlinear optics and data storage devices. Scanning probe microscopy (SPM) has emerged as a powerful tool both for studies of domain structures with nanoscale spatial resolution and for writing the isolated nanodomains by local application of the electric field. Quantitative analysis of the observed behavior requires understanding the role of environmental factors on imaging and switching process. Here, we study the influence of the relative humidity in the SPM chamber on tip-induced polarization switching. The observed effects are attributed to existence of a water meniscus between the tip and the sample surface in humid atmosphere. These results are important for a deeper understanding of complex investigations of ferroelectric materials and their applications and suggest the necessity for fundamental studies of electrocapillary phenomena at the tip-surface junction and their interplay with bias-induced materials responses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of combinatorial coevaporated thin film Cu{sub 2}ZnSnS{sub 4}. I. Temperature effect, crystalline phases, morphology, and photoluminescence

Cu{sub 2}ZnSnS{sub 4} is a promising low-cost, nontoxic, earth-abundant absorber material for thin-film solar cell applications. In this study, combinatorial coevaporation was used to synthesize individual thin-film samples spanning a wide range of compositions at low (325 °C) and high (475 °C) temperatures. Film composition, grain morphology, crystalline-phase and photo-excitation information have been characterized by x-ray fluorescence, scanning electron microscopy, x-ray diffraction, Raman spectroscopy, and photoluminescence imaging and mapping. Highly textured columnar grain morphology is observed for film compositions along the ZnS-Cu{sub 2}ZnSnS{sub 4}-Cu{sub 2}SnS{sub 3} tie line in the quasi-ternary Cu{sub 2}S-ZnS-SnS{sub 2} phase system, and this effect is attributed to structural similarity between the Cu{sub 2}ZnSnS{sub 4}, Cu{sub 2}SnS{sub 3}, and ZnS crystalline phases. At 475 °C growth temperature, Sn-S phases cannot condense because of their high vapor pressures. As a result, regions that received excess Sn flux during growth produced compositions falling along the ZnS-Cu{sub 2}ZnSnS{sub 4}-Cu{sub 2}SnS{sub 3} tie line. Room-temperature photoluminescence imaging reveals a strong correlation for these samples between film composition and photoluminescence intensity, where film regions with Cu/Sn ratios greater than ∼2 show strong photoluminescence intensity, in comparison with much weaker photoluminescence in regions that received excess Sn flux during growth or subsequent processing. The observed photoluminescence quenching in regions that received excess Sn flux is attributed to the effects of Sn-related native point defects in Cu{sub 2}ZnSnS{sub 4} on non-radiative recombination processes. Implications for processing and performance of Cu{sub 2}ZnSnS{sub 4} solar cells are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of multicomponent hybrid density functional theory with polarizable continuum model for the analysis of nuclear quantum effect and solvent effect on NMR chemical shift

We have developed the multicomponent hybrid density functional theory [MC-(HF+DFT)] method with polarizable continuum model (PCM) for the analysis of molecular properties including both nuclear quantum effect and solvent effect. The chemical shifts and H/D isotope shifts of the picolinic acid N-oxide (PANO) molecule in chloroform and acetonitrile solvents are applied by B3LYP electron exchange-correlation functional for our MC-(HF+DFT) method with PCM (MC-B3LYP/PCM). Our MC-B3LYP/PCM results for PANO are in reasonable agreement with the corresponding experimental chemical shifts and isotope shifts. We further investigated the applicability of our method for acetylacetone in several solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effective Landé factor in a GaMnAs quantum dot; with the effects of sp-d exchange on a bound polaron

The effective g-factor of conduction (valence) band electron (hole) is obtained in the GaMnAs quantum dot. Magneto bound polaron in a GaMnAs/Ga{sub 0.6}Al{sub 0.4}As quantum dot is investigated with the inclusion of exchange interaction effects due to Mn alloy content and the geometrical confinement. The spin polaronic energy of the heavy hole exciton is studied with the spatial confinement using a mean field theory in the presence of magnetic field strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of boron-nitride substrates on Stone-Wales defect formation in graphene: An ab initio molecular dynamics study

Ab initio molecular dynamics simulations are performed to investigate the effects of a boron nitride (BN) substrate on Stone-Wales (SW) defect formation and recovery in graphene. It is found that SW defects can be created by an off-plane recoil atom that interacts with the BN substrate. A mechanism with complete bond breakage for formation of SW defects in suspended graphene is also revealed for recoils at large displacement angles. In addition, further irradiation can result in recovery of the SW defects through a bond rotation mechanism in both graphene and graphene/BN, and the substrate has little effect on the recovery process. This study indicates that the BN substrate enhances the irradiation resistance of graphene.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of silver doping on the surface of La{sub 5/8}Ca{sub 3/8}MnO{sub 3} epitaxial films

Thin film manganese oxides (manganites) display remarkable properties, such as colossal magnetoresistance and charge ordered phases, and became a focal point of research in the past two decades owing to potential applications ranging from oxide spintronics to resistive switching-based memories. La{sub x}Ca{sub 1−x}MnO{sub 3} (LCMO), a widely studied manganite, is known to substantially improve its transport properties when doped with Ag. However, despite the abundance of studies on LCMO, the effect of silver on the surface structure is unknown. Here, through in-situ methods, scanning tunneling microscopy (STM) is performed on La{sub 5/8}Ca{sub 3/8}MnO{sub 3} films grown by pulsed laser deposition. Films doped by silver, as confirmed by in-situ X-ray photoelectron spectroscopy, display large-scale reconstructions, interpreted as being of type (√10 × √10)R18.4°, while films lacking silver display a (√2 × √2)R45° reconstruction that may be associated with a surface charge-ordered state. It is posited that the possible cause of the varied reconstructions is due to a vacancy ordering on top of the existing (√2 × √2)R45° reconstruction. These studies highlight the influence of Ag on the surface structure, and therefore a route towards modifying the surface properties of manganites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Zn doping on the magneto-caloric effect and critical constants of Mott insulator MnV{sub 2}O{sub 4}

X-ray absorption near edge spectra (XANES) and magnetization of Zn doped MnV{sub 2}O{sub 4} have been measured and from the magnetic measurement the critical exponents and magnetocaloric effect have been estimated. The XANES study indicates that Zn doping does not change the valence states in Mn and V. It has been shown that the obtained values of critical exponents β, γ and δ do not belong to universal class and the values are in between the 3D Heisenberg model and the mean field interaction model. The magnetization data follow the scaling equation and collapse into two branches indicating that the calculated critical exponents and critical temperature are unambiguous and intrinsic to the system. All the samples show large magneto-caloric effect. The second peak in magneto-caloric curve of Mn{sub 0.95}Zn{sub 0.05}V{sub 2}O{sub 4} is due to the strong coupling between orbital and spin degrees of freedom. But 10% Zn doping reduces the residual spins on the V-V pairs resulting the decrease of coupling between orbital and spin degrees of freedom.

36 MATERIALS SCIENCE↗

Communication: Localized molecular orbital analysis of the effect of electron correlation on the anomalous isotope effect in the NMR spin-spin coupling constant in methane

We discuss the effect of electron correlation on the unexpected differential sensitivity (UDS) in the {sup 1}J(C–H) coupling constant of CH{sub 4} using a decomposition into contributions from localized molecular orbitals and compare with the {sup 1}J(N–H) coupling constant in NH{sub 3}. In particular, we discuss the well known fact that uncorrelated coupled Hartree-Fock (CHF) calculations are not able to reproduce the UDS in methane. For this purpose we have implemented for the first time a localized molecular orbital analysis for the second order polarization propagator approximation with coupled cluster singles and doubles amplitudes—SOPPA(CCSD) in the DALTON program. Comparing the changes in the localized orbital contributions at the correlated SOPPA and SOPPA(CCSD) levels and at the uncorrelated CHF level, we find that the latter overestimates the effect of stretching the bond between the coupled atoms on the contribution to the coupling from the localized bonding orbital between these atoms. This disturbs the subtle balance between the molecular orbital contributions, which lead to the UDS in methane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of shock dynamics on compressibility of ignition-scale National Ignition Facility implosions

The effects of shock dynamics on compressibility of indirect-drive ignition-scale surrogate implosions, CH shells filled with D{sup 3}He gas, have been studied using charged-particle spectroscopy. Spectral measurements of D{sup 3}He protons produced at the shock-bang time probe the shock dynamics and in-flight characteristics of an implosion. The proton shock yield is found to vary by over an order of magnitude. A simple model relates the observed yield to incipient hot-spot adiabat, suggesting that implosions with rapid radiation-power increase during the main drive pulse may have a 2× higher hot-spot adiabat, potentially reducing compressibility. A self-consistent 1-D implosion model was used to infer the areal density (ρR) and the shell center-of-mass radius (R{sub cm}) from the downshift of the shock-produced D{sup 3}He protons. The observed ρR at shock-bang time is substantially higher for implosions, where the laser drive is on until near the compression bang time (“short-coast”), while longer-coasting implosions have lower ρR. This corresponds to a much larger temporal difference between the shock- and compression-bang time in the long-coast implosions (∼800 ps) than in the short-coast (∼400 ps); this will be verified with a future direct bang-time diagnostic. This model-inferred differential bang time contradicts radiation-hydrodynamic simulations, which predict constant 700–800 ps differential independent of coasting time; this result is potentially explained by uncertainties in modeling late-time ablation drive on the capsule. In an ignition experiment, an earlier shock-bang time resulting in an earlier onset of shell deceleration, potentially reducing compression and, thus, fuel ρR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗