Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Hi-C Observations of Penumbral Bright Dots: Comparison with the IRIS Results

We observed bright dots (BDs) in a sunspot penumbra by using data acquired by the High Resolution Coronal Imager (Hi-C). The sizes of these BDs are on the order of 1 arcsecond (1') and are therefore hard to identify using the Atmospheric Imaging Assembly's (AIA) 0.6' pixel -1 resolution. These BDs become readily apparent with Hi-C's 0.1' pixel -1 resolution. Tian et al. (2014) found penumbral BDs in the transition region (TR) by using the Interface Region Imaging Spectrograph (IRIS). However, only a few of their dots could be associated with any enhanced brightness in AIA channels. In this work, we examine the characteristics of the penumbral BDs observed by Hi-C in a sunspot penumbra, including their sizes, lifetimes, speeds, and intensity. We also attempt to relate these BDs to the IRIS BDs. There are fewer Hi-C BDs in the penumbra than seen by IRIS, though different sunspots were studied and Hi-C had a short observation time. We use 193 A Hi-C data from July 11, 2012 which observed from 18:52:00 UT{18:56:00 UT and supplement it with data from AIA's 193 A passband to see the complete lifetime of the dots that were born before and/or lasted longer than Hi-C's 5-minute observation period. We use additional AIA passbands and compare the light curves of the BDs at different temperatures to test whether the Hi-C BDs are TR BDs. We find that most Hi-C BDs show clear movement, and of those that do, they move in a radial direction, toward or away from the sunspot umbra, sometimes doing both. BDs interact with other BDs, combining to fade away or brighten. The BDs that do not interact with other BDs tend to move less and last longer. We examine the properties of the Hi-C BDs and compare them with the IRIS BDs. Our BDs are similar to the exceptional values of the IRIS BDs: they move slower on average and their sizes and lifetimes are on the higher end of the distributions of IRIS BDs. We infer that our penumbral BDs are some of the larger BDs observed by IRIS.

Alpert, S. E.↗

Quantum Dots Microstructured Optical Fiber for X-Ray Detection

Microstructured optical fibers containing quantum dots scintillation material comprised of zinc sulfide nanocrystals doped with magnesium sulfide are presented. These quantum dots are applied inside the microstructured optical fibers using capillary action. The x-ray photon counts of these fibers are compared to the output of a collimated CdTe solid state detector over an energy range from 10 to 40 keV. The results of the fiber light output and associated effects of an acrylate coating and the quantum dot application technique are discussed.

DeHaven, Stan↗

Quantum Dots Microstructured Optical Fiber for X-Ray Detection

A novel concept for the detection of x-rays with microstructured optical fibers containing quantum dots scintillation material comprised of zinc sulfide nanocrystals doped with magnesium sulfide is presented. These quantum dots are applied inside the microstructured optical fibers using capillary action. The x-ray photon counts of these fibers are compared to the output of a collimated CdTe solid state detector over an energy range from 10 to 40 keV. The results of the fiber light output and associated effects of an acrylate coating and the quantum dots application technique are discussed.

DeHaven, S. L.↗

Time resolved studies of proton irradiated quantum dots

The effects of proton irradiation on carrier dynamics were measured by time-resolved photoluminescence on InGaAs/GaAs quantum dot structures with different dot density and substrate orientation, as well as on InAlAs/AlGaAs quantum dots.

nanotechnology↗

Effect of electron-nuclear spin interactions for electron-spin qubits localized in InGaAs self-assembled quantum dots

The effect of electron-nuclear spin interactions on qubit operations is investigated for a qubit represented by the spin of an electron localized in an InGaAs self-assembled quantum dot. The localized electron wave function is evaluated within the atomistic tight-binding model. The electron Zeeman splitting induced by the electron-nuclear spin interaction is estimated in the presence of an inhomogeneous environment characterized by a random nuclear spin configuration, by the dot-size distribution, alloy disorder, and interface disorder. Due to these inhomogeneities, the electron Zeeman splitting varies from one qubit to another by the order of 10(-6), 10(-6), 10(-7), and 10(-9) eV, respectively. Such fluctuations cause errors in exchange operations due to the inequality of the Zeeman splitting between two qubits. However, the error can be made lower than the quantum error threshold if an exchange energy larger than 10(-4) eV is used for the operation. This result shows that the electron-nuclear spin interaction does not hinder quantum-dot based quantum computer architectures from being scalable even in the presence of inhomogeneous environments.

Whaley, K. Birgitta↗

Evaluation of a Laser-Dot Grid-Projection System for Lunar Lander Crater-Shape and Ejecta-Sheet Measurements

Development, testing, and evaluation of an active-illumination laser-dot grid-projection system was performed to evaluate its potential inclusion on an upcoming uncrewed lunar lander mission to the south pole region of the moon. Active illumination may be required for this mission due to the shallow angle of the sun at the landing location, which may cast shadows in the landing region, hindering the stereo camera imaging system’s ability to determine the pre-and post-landing lunar surface/crater shape. Testing includes characterization of the diffractive optical elements used for the grid projection, single-camera tests to determine the imaged laser dot intensity as a function of camera exposure and imaging angle relative to the laser grid projection, laser dot brightness/saturation impact on depth map calculations, angle of imaged laser grid impact on depth map calculations for steep crater edges, impact of density gradients on the depth map calculations, and the feasibility of making measurements of the ejecta sheet.

Joshua M. Weisberger↗

Silicon Quantum Dots with Counted Antimony Donor Implants

Deterministic control over the location and number of donors is crucial to donor spin quantum bits (qubits) in semiconductor based quantum computing. A focused ion beam is used to implant close to quantum dots. Ion detectors are integrated next to the quantum dots to sense the implants. The numbers of ions implanted can be counted to a precision of a single ion. Regular coulomb blockade is observed from the quantum dots. Charge offsets indicative of donor ionization, are observed in devices with counted implants.

Singh, Meenakshi↗

"Ion" B-Dot and Faraday Cup Results Located Inside The Cathode Knob Of The Self Magnetic Pinch (Smp) Diode (A New Diagnostic For Diode Behavior?)

This paper describes our effort to measure the back-streaming ions emitted from the target x-ray convertor and thus estimate the ion contribution to the A-K gap bipolar current flow. Knowing the ion contribution is quite important in order to calculate the expected x-ray dose and compare it with the actual measurements. Our plans were first to measure the total ion current using B-dot monitors, Rogowski coils, and Faraday cups and then to utilize filtered Faraday cups and time of flight techniques to identify and measure the various ionic species. The kinetic energy (velocities) of the ions should help evaluate the actual voltage applied at the anode-cathode (A-K) gap. LSP simulations found that the most prominent ions are protons and carbon single plus (C+). For an 8-MV A-K voltage, the estimated proton current back-streaming through an 1 cm in diameter hollow cathode tip was on the average 3 kA and the carbon current 0.7 kA. Since only a small fraction of the ions will make it through the cylindrical aperture, the corresponding total currents were calculated to be respectively 25kA for proton and 7 kA for carbon ions, a quite substantial contribution to the total bipolar beam current. Hence, approximately only 10% of the total back-streaming ionic currents could make it through the hollow cathode tip aperture. Unfortunately the diagnostic cables connecting the Faraday cup and the B-dot monitors to the screen room scopes experienced a large amount of charge pick-up that obliterated our effort to directly measure those relatively small currents. However, we succeeded in measuring those currents indirectly with activation techniques [Contribution of the back-streaming ions to the self-magnetic pinch (SMP) diode Current., M. G. Mazarakis, M. G. Mazarakis, M. E. Cuneo, S. D. Fournier, M. D. Johnston, M. L. Kiefer, J. J. Leckbee, D. S. Nielsen, B.V.Oliver, M. E. Sceiford, S. C. Simpson, T. J. Renk, C. L. Ruiz, T. J. Webb, and D. Ziska. Subitted for publication.]. In the following sections we present some typical cable pick-up results and also our efforts to verify that the observed “current” scope traces were indeed not ion currents but instead cable charge pic-up. Interestingly enough we also discovered that the appearance of those “currents” are in synchronism with the A-K gap impedance variation (decrease) and the MITL sheath current re-trapping. Hence those B-dots or Faraday cups could be utilized as diode behavior diagnostics.

Mazarakis, Michael G.↗

Spin-orbit qubit using quantum dots

Methods and apparatus of quantum information processing using quantum dots are provided. Electrons from a 2DEG are confined to the quantum dots and subjected to a magnetic field having a component directed parallel to the interface. Due to interfacial asymmetries, there is created an effective magnetic field that perturbs the energies of the spin states via an interfacial spin-orbit (SO) interaction. This SO interaction is utilized to controllably produce rotations of the electronic spin state, such as X-rotations of the electronic spin state in a double quantum dot (DQD) singlet-triplet (ST) qubit. The desired state rotations are controlled solely by the use of electrical pulses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Simulation of Charge Transfer at the Semiconductor Quantum Dot/TiO 2 Interface in Quantum Dot-Sensitized Solar Cells

Quantum dot-sensitized solar cells (QDSSCs) have emerged as a promising solar architecture for next-generation solar cells. The QDSSCs exhibit a remarkably fast electron transfer from the quantum dot (QD) donor to the TiO 2 acceptor with size quantization properties of QDs that allows for the modulation of band energies to control photoresponse and photoconversion efficiency of solar cells. In order to understand the mechanisms that underpin this rapid charge transfer, the electronic properties of CdSe and PbSe QDs with different sizes on the TiO 2 substrate are simulated using a rigorous ab initio density functional method. Our method capitalizes on localized orbital basis set, which is computationally less intensive. Quite intriguingly, a remarkable set of electron bridging states between QDs and TiO 2 occurring via the strong bonding between the conduction bands of QDs and TiO 2 is revealed. Such bridging states account for the fast adiabatic charge transfer from the QD donor to the TiO 2 acceptor, and may be a general feature for strongly coupled donor/acceptor systems. All the QDs/TiO 2 systems exhibit type II band alignments, with conduction band offsets that increase with the decrease in QD size. This facilitates the charge transfer from QDs donors to TiO 2 acceptors and explains the dependence of the increased charge transfer rate with the decreased QD size.

14 SOLAR ENERGY↗

Introduction to special issue: Colloidal quantum dots

The quantum confinement effect has driven the development and exploration of colloidal semiconductor nanocrystals over approximately the past three decades. These semiconductor nanostructures are typically synthesized as stable colloidal dispersions in solution-phase chemical batch reactions at relatively low temperatures. Researchers have developed a wide range of reaction conditions to produce a variety of shapes, compositions, and structures with well-controlled sizes and low polydispersities. The shape can be controlled to produce confinement in one, two, or all three spatial dimensions, the latter defining a “quantum dot.” Combining two or more semiconductors within the various nanostructures produces additional optical and electronic degrees of freedom. These mixed compositional nanostructures have properties not accessible in bulk semiconductor systems. Further, researchers have fabricated novel nanoheterostructures, such as “dot-in-rods,” quantum wells, core/shell structures, giant-core/shell tetrapods where the core is one material and the arm is another, Janus structures that consist of spherical structures with well-defined internal heterostructures, nano-dumbbells, hollow-core structures, and many other novel and interesting structures. The structural variations are seemingly only limited by the creativity of the various researchers engaged in these endeavors.

36 MATERIALS SCIENCE↗

Expanding the utility and range of quantum and polymer dots for multiplexed super resolution fluorescence imaging in plants (Final Progress Report)

The emission spectra of plant pigments currently limit the number of fluorescent colors that can be imaged simultaneously and, therefore, the number of cellular components that can be imaged within a single experiment. Hence, developing fluorescent tags and a microscope system that can image beyond the visible range (NIR) would greatly enhance plant imaging capabilities. Extending imaging into the NIR would support the interrogation of multiple proteins/molecules simultaneously, but would inevitably decrease spatial resolution due to the increase of the diffraction limit of light. To address this need, we propose to develop a super resolution fluorescence imaging (SRFI) platform that would allow imaging of NIR-emitting molecules, as well as quantum dots (QDs) and polymer dots (Pdots).

59 BASIC BIOLOGICAL SCIENCES↗

Investigarion of the effects of a quantum dot crystal geometry on its brillouin spectrum

We develop a theoretical model and carry out simulation of Brillouin spectrum of three-dimensional (3D) quantum dot (QD) arrays with a high order of 3D periodicity, i.e. quantum dot crystals (QDC). The phonon spectrum of Ge/Si QDC is found from the numerical solution of the elasticity equation for the whole structure. The developed approach is valid for any QD shape and regimentation and allows to include disorder in consider at ion.

quantum dot arrays quantum dot crystal raman spect↗

Multifunction Hydrophobic Ligand Engineered Cd(S, Se)/ZnS Quantum Dots for Stabilizing Highly Efficient Carbon‐Based Perovskite Solar Cells

The long-term operational stability of perovskite solar cells (PSCs) remains a key challenge impeding their commercialization, particularly due to ambient environments (e.g., moisture, oxygen, heat)-induced degradation. Carbon electrode-based PSCs have emerged as cost-effective and relatively stable alternatives to metal electrode-based devices due to carbon materials' hydrophobic behavior, yet they still lag in both long-term durability and power conversion efficiency (PCE). In this work, an ultrathin hydrophobic ligand-modified core–shell Cd(S,Se)/ZnS quantum dots (QDs) capping layer is introduced as a multifunctional interfacial modifier for carbon-electrode-based PSCs. This oleic acid ligand-modified QDs capping layer exhibits inherent hydrophobicity, effectively serving as a moisture barrier to retard perovskite degradation under ambient conditions. Furthermore, the strong interfacial bonding between the QDs and perovskite halide surfaces leads to efficient trap state passivation, reducing trap density and creating a more uniform electrical contact. The modified QDs/perovskite interface also features an elevated conduction band edge, promoting improved charge extraction. As a result, devices incorporating this quantum dot capping layer retain 98% of their initial PCE after 450 h of ambient aging and achieve a champion efficiency of 20.74%. As a result, this strategy highlights the potential of hydrophobic ligand-modified chalcogenide QDs as surface modifiers to enhance both the stability and performance of carbon-based PSCs, offering a promising route toward scalable fabrication of durable perovskite solar modules.

14 SOLAR ENERGY↗

Study on the Interaction of the CpG Alternating DNA with CdTe Quantum Dots

A novel sensitive method for detection of DNA methylation was developed with thioglycollic acid (TGA)-capped CdTe quantum dots (QDs) as fluorescence probes. Recognition of methylated DNA sites would be useful strategy due to the important roles of methylation in disease occurrence and developmental processes. DNA methylation occurs most often at cytosine-guanine sites (CpG dinucleotides) of gene promoters. The QDs significantly interacted with hybridized unmethylated and methylated DNA. The interaction of CpG rich methylated and unmethylated DNA hybrid with quantum dots as an optical probe has been investigated by fluorescence spectroscopy and electrophoresis assay. The fluorescence intensity of QDs was highly dependent to unmethylated and methylated DNA. Specific site of CpG islands of Adenomatous polyposis coli (APC), a well-studied tumor suppressor gene, was used as the detection target. Under optimum conditions, upon the addition of unmethylated dsDNA, the fluorescence intensity increased in linear range from 1.0 × 10{sup − 10} to 1.0 × 10{sup − 6}M with detection limit of 6.2 × 10{sup − 11} M and on the other hand, the intensity of QDs showed no changes with addition of methylated dsDNA. We also demonstrated that the unmethylated and methylated DNA and QDs complexes showed different mobility in electrophoresis assay. This easy and reliable method could distinguish between methylated and unmethylated DNA sequences.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlated spin systems in undoped CdSe quantum dots

The electronic properties of quantum dots have been studied extensively, and recent studies have explored various dopants that can alter electronic properties in quantum dots. Yet, we have found that impurities on the surface of nanometer-scale CdSe materials can also affect electronic properties. Specifically, nitrogen-based impurities on the surface of nanometer-scale CdSe materials (from ~4 nm to 15 nm) interact with the CdSe conduction electrons to yield an anti-ferromagnetic EPR signal at a high resonance field (g~0.56) that has an inverse Dysonian lineshape. However, bulk CdSe particles do not show the same types of EPR signals. This paper will discuss these observations, explain the underlying phenomena, and discuss implications for future research.

Electronic Structure↗

Diamagnetic susceptibility and optical properties of a spherical quantum dot: effects of the parabolic and the shifted parabolic potentials

Centred charge donor related diamagnetic susceptibility and optical properties of a spherical GaAs quantum dot are presented. In particular, effects of intrinsic parabolic and shifted parabolic potentials on these quantities are investigated. This is theoretically achieved by solving the Schrödinger equation within the effective mass approximation. It is observed that the parabolic potential reduces the magnitude of the diamagnetic susceptibility while the shifted parabolic potential increases it. Other findings are that the parabolic potential blue-shifts both the absorption coefficient and the change in refractive index of quantum dots, while the shifted parabolic potential red-shifts these quantities. These features are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of the Growth Processes of Germanium Quantum Dots on the Si(100) and Si(111) Surfaces

A comparative analysis is carried out of the growth peculiarities under molecular-beam epitaxy of germanium quantum dots on the silicon surfaces with different crystallographic orientations Si(100) and Si(111), including the case of the presence of tin surfactant on the surface. The free energy change, activation barrier of nucleation, critical thickness of the transition from two-dimensional growth to three-dimensional one, as well as the surface density and size distribution function of quantum dots in these systems are calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗