Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dissolved Gas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Experimental Study of Lunar and SNC Magmas

The research described in this progress report involved the study of petrological, geochemical and volcanic processes that occur on the Moon and the SNC parent body, generally accepted to be Mars. The link between these studies is that they focus on two terrestrial-type parent bodies somewhat smaller than earth, and the fact that they focus on the role of volatiles in magmatic processes and on processes of magma evolution on these planets. The work on the lunar volcanic glasses has resulted in some exciting new discoveries over the years of this grant. During the tenure of the present grant, we discovered a variety of metal blebs in the A17 orange glass. Some of these Fe-Ni metal blebs occur in the glass; others were found in olivine phenocrysts which we find make up about 2 vol % of the orange glass magma. The importance of these metal spheres is that they fix the oxidation state of the parent magma during the eruption, and also indicate changes during the eruption. They also yield important information about the composition of the gas phase present, the gas which drove the lunar fire-fountaining. In an Undergraduate senior thesis project, Nora Klein discovered a melt inclusion that remained in a glassy state in one of the olivine phenocrysts. Analyses of this inclusion gave additional information on the CO2, CO and S contents of the orange glass magma prior to its reaching the lunar surface. The composition of lunar volcanic gases has long been one of the puzzles of lunar magmatic processes. One of the more exciting findings in our research over the past year has been the study of magmatic processes linking the SNC meteorite source magma composition with the andesitic composition rocks found at the Pathfinder site. In this project, graduate student Michelle Minitti showed that there was a clear petrologic link between these two magma types via fractional removal of crystals from the SNC parent melt, but the process only worked if there was at least 1 wt % dissolved water in the melt.

Rutherford, Malcolm J.↗

Carbon in the outer solar system

The satellites of Uranus, with densities between 1.3 and 1.7 g cm(-3) (from Voyager 2 observations) and the Pluto-Charon system, with a mean density of just above 1.8 g cm(-3) (from terrestrial observations of mutual eclipse events), are too dense to have a significant amount of methane ice in their interiors. However, the observed densities do not preclude contributions from such organic materials as the acid-insoluble residue in carbonaceous chondrites and laboratory-produced tholins, which have densities on the order of approximately 1.5 g cm(-3). These and other considerations have led researchers to investigate the carbon mass budget in the outer solar system, with an emphasis on understanding the contribution of organic materials. Modeling of the interiors of Pluto and Charon (being carried out by R. Reynolds and A. Summers of NASA/Ames), assuming rock and water ice as the only constituents, suggests a silicate mass fraction for this system on the order of 0.65 to 0.70. The present work includes the most recent estimates of the C/H enhancements and high z/low z ratios of the giant planets (Pollack and Bodenheimer, 1987), and involves a more careful estimation of the high z/low z mass ratio expected from solar abundances than was used in Pollack et al. (1986), including the influence of the fraction of C in CO on the amount of condensed water ice. These calculations indicate that for a particular fraction of C in CO and a given fraction of C-bearing planetesimals that dissolve in the envelope (most likely in the range 0.50 to 0.75), (1) Jupiter and Saturn require a larger fraction of C in condensed materials than Uranus and Neptune, but (2) the Jupiter and Saturn results are much less strongly constrained by the error bars on the observed C/H enhancements and high z/low z ratios than is the case for Uranus and Neptune. The clearest result is that in the region of the solar nebula near Uranus and Neptune, the minority of carbon that is not in gaseous CO (1) must include a nonzero amount of condensed material, but (2) is most likely not condensed material alone, i.e., there must be a third carbon-bearing component besides condensed material and gaseous CO. Given the implied dearth of methane ice, the condensed carbon is likely dominated by organic material, and the third component present in addition to CO and organics is assumed to be CH4 gas.

Simonelli, D. P.↗

Composition and Plume Gas Interaction Control Iron Fractional Solubility More Than Particle Size in Volcanic Ash: Implications for Fertilization of the North Atlantic

Deposition of volcanic ash is thought to impact marine biogeochemical cycling by adding soluble iron (Fe) to the surface ocean. The magnitude of this input is a function of the amount of ash deposited, the total Fe content in the ash, and ash‐derived Fe's fractional solubility. However, the relative importance of chemical composition, acidic processing by the volcanic plume, and ash particle size in determining solubility is unclear. We paired an aerosol leach meant to provide an upper limit for fractional Fe solubility with chemical analyses of ash from the Cumbre Vieja (CV) and La Soufrière eruptions, which both impacted the North Atlantic in 2021. Fe in the ash samples is <6% soluble, but Fe fractional solubility in CV ash is approximately triple that of La Soufrière ash. Compared to La Soufrière, a larger proportion of the Fe in CV ash is in silicate rather than oxide minerals, which release more soluble Fe. Elevated levels of surficial fluorine (F) also suggest that CV ash was subjected to a more fluorine‐rich eruption plume and underwent more acidic processing. Particle size does not appear to be a primary control on Fe release. We estimate that the CV eruption had a much larger impact on dissolved Fe (DFe) concentration in the surface ocean than the La Soufrière eruption because of differences in soluble Fe content and particle deposition velocity. These differences may help explain why some eruptions elicit a biological response in the ocean while others do not.

Elliott, Hope E. [Univ. of Miami, FL (United State↗

Interactions between molecular-scale biogeochemical processes and hyporheic exchange for understanding coupled Fe-S-C cycling in iron-rich riparian wetlands (Final Technical Report)

Riparian wetlands are dynamic interfaces that exert strong control over water quality, contaminant mobility, and greenhouse gas emissions. These systems are characterized by hyporheic exchange between oxic surface water and anoxic groundwater, which generates steep redox gradients and promotes spatially and temporally variable microbial activity. Despite growing recognition of tightly coupled iron (Fe), sulfur (S), and carbon (C) cycling in these environments, the mechanisms governing these interactions—particularly under low-sulfate freshwater conditions—remain poorly constrained. This project developed a mechanistic understanding of how hydrologic variability and microbial processes interact to control Fe–S–C cycling in iron-rich riparian wetlands. Using a multi-scale and multi-method approach integrating field observations, geochemical and spectroscopic analyses, metagenomics, and reactive transport modeling, we demonstrate that “cryptic” sulfur cycling—rapid sulfur transformations involving intermediate-valence species—plays a dominant and previously underrecognized role in freshwater wetlands. These processes persist despite low sulfate concentrations and significantly influence iron reduction, carbon mineralization, and methane dynamics. The results show that cryptic sulfur cycling enhances dissolved Fe 2+ production, regulates methane concentrations, and is strongly controlled by climate-driven hydrologic fluxes. By linking hydroclimate, subsurface flow, and biogeochemical reactions, this work provides a predictive framework for understanding how wetland systems respond to environmental change, with direct implications for water quality and carbon cycling.

54 ENVIRONMENTAL SCIENCES↗

Produced Water and Waste Heat-aided Blowdown Water Treatment: Using Chemical and Energy Synergisms for Value Creation

The project objective was to develop a cooling blowdown water (BDW) treatment process utilizing produced water (PW) and low-grade heat to maximize water reuse and saleable by-product generation while reducing chemical and energy footprints of the treatment. The proposed treatment process consists of mixing, softening, organics and suspended solids removal, reverse osmosis (RO), thermal desalination, and brine electrolysis. BDW samples collected from a local coal-fired power plant and PW samples from two shale gas production wells were used in this study. Each treatment unit was first designed and tested to quantify its treatment efficiency, and its chemical and energy requirements. In addition, a process model was developed and model simulations were conducted based on the experimental results and literature data to optimize the treatment process. A techno-economic analysis was conducted to quantify chemical and energy savings as well as production of 10-lb brine as a saleable product. With the field-collected BDW and PW samples, mixing experiments determined a volumetric mixing ratio 10:1 (BDW:PW) resulted in the best performance of multivalent ions removal and largest chemical savings for softening. Softening of the BDW/PW mixtures using alkaline chemicals (Na 2 CO 3 and NaOH) achieved 95%-100% removal of scaling-forming cations (Ca, Mg, Fe, Ba, Sr) and 60% of silicon, and 10% of total organic carbon (TOC). The mixing and softening treatments yielded an effluent with total dissolved solids (TDS) concentration of 23 g/L. Activated carbon (AC) filtration removed TOC to a low level (< 3 mg/L) and further removed remaining scale-forming divalent metals and silica from the softened water. The AC filtration resulted in a slight reduction of TDS from 23 g/L to 20 g/L, leaving behind only mostly monovalent ions (i.e., sodium and chloride) in the filtered water. These pretreatments yielded a feed water that met the criteria of the downstream reverse osmosis (RO) to prevent membrane fouling. A cross-flow RO system was used to further concentrate the TDS of the AC effluent. Various factors including TDS, pH, and applied pressure were examined and optimal conditions were determined for the co-treatment process. An integrated process consisting of mixing, softening, AC filtration and RO was used to treat a continuous flow (0.25 – 1.2 L/min, or 0.07 – 0.32 gpm) and successfully generated RO permeate as product water (TDS < 0.5 g/L) for reuse in cooling operation, and a concentrate (TDS ~ 45 g/L) to be further treated in a thermal desalination unit. These flow rates meet the FOA’s criterion of 0.01 – 1 gpm. Overall, the co-treatment of BDW/PW allowed shorter ramp-up time compared to treatment of BDW alone. It resulted in 40% and 55% savings of Na 2 CO 3(s) and NaOH, respectively, compared to treating the BDW and PW individually for the same level of softening. The co-treatment also resulted in a 29% energy saving compared to treatment of BDW only for the level of TDS concentration. A thermal desalination system was designed using CFD simulations and manufactured in the WVU Innovation Hub for further treatment of the RO concentrate to generate 10-lb brine. The system has a design flow rate of 2 gpm and has been successfully tested. A bench-scale brine electrolysis system was developed for on-site generation of chlorine/hypochlorite (Cl 2 /OCl - ) and caustic soda (NaOH) as useful chemicals for the co-treatment process. Using salt solutions (0.5 M and 1 M), the system achieved faradaic efficiencies of 93%-97% and 70%-77% for caustic soda and chlorine/hypochlorite generation, respectively. An economic analysis showed that the electricity costs for on-site generation of these chemicals were significantly lower than the chemical prices offered by suppliers. An industrial-scale process model consisting of mixing, softening, AC filtration, RO, thermal desalination, and brine electrolysis was developed using the Aspen Plus V9 in conjunction with Aspen Custom Modeler V9. The model serves as a solvable Aspen Plus model and as basis to form the costing infrastructure. In addition, techno-economic analysis considering capital, operating, and transportation costs was conducted. An optimization solution showed that produced water for mixing is still advantageous in low quantities. The optimum solution approaches a leveled cost of water (LCW) of 2 $/m 3 which becomes cost competitive with nominal water treatment prices.

20 FOSSIL-FUELED POWER PLANTS↗

Calcined Polyethyleneimine-Coated Optical Fibers for Distributed pH Monitoring at High Pressures and Temperatures

In the oil and gas, CO2 sequestration, H2 subsurface storage, and geothermal energy sectors, subsurface pH measurements are critical for monitoring the geochemical conditions and estimating potential corrosion rates of wellbore systems. Real-time pH measurements in these conditions are vital for detecting and predicting corrosion deterioration of wellbore components that may jeopardize the safety and continued operation of wellbore systems. Previous tests using metal oxide-based coatings (TiO2) provided strong responses at elevated temperatures and moderate pressure stability but provided poor differentiation between acidic and alkaline solutions. Building off the pH responsiveness of the TiO2 surface and known pH sensitivity of amine-based polymers, a coating based on the secondary amine polymer polyethyleneimine (PEI) was developed. As the polymer itself is highly water soluble and easily removed by aqueous solutions, the sensor coating was treated with a high temperature (500 °C) calcination procedure in air to convert it into a more stable oxidized coating capable of withstanding hot aqueous solutions without dissolving while retaining linear pH sensitivity from pH values between 2 and 11. The sensor performance was measured using optical transmission measurements in solutions of various pHs and using optical backscatter reflectometry for distributed pH sensing demonstration in wellbore-relevant pressures (up to 1,000 psi) and temperatures (80 °C).

Shumski, Alexander↗

Fe Oxidation and Species Distribution at the Rock–Fluid Interface of Marcellus Shale Reacted with Hydraulic Fracturing Fluid

Hydraulic fracturing of shale reservoirs resulted in significant opportunity for increased oil and gas production in the United States. Rock-fluid interactions can cause mineral dissolution and precipitation reactions that lead to permeability changes in the shale matrix, which ultimately may affect transport pathways and hydrocarbon production. Understanding the distribution of secondary precipitates, such as barite and Fe(III) (hydro)oxides, and cation leaching at the rock-fluid interface is an important step to further investigate how these geochemical processes can change permeability and transport pathways. In this study, thin sections of the fracture-matrix interface were made from reacted Marcellus shale cores. The thin sections were characterized using synchrotron X-ray fluorescence imaging and synchrotron X-ray absorption spectroscopy. Fe species with different oxidation states were identified in the maps, together with barite and Ca distribution. The results show that ferrihydrite, as newly formed Fe(III)-bearing precipitates, aligned well with the border of the Ca (e.g., calcite) leaching region in the reaction front. Some Fe-containing clay also dissolved, but the dissolution region for the clay was not as deep as the calcite. Further, the reaction front is about three times deeper in the direction parallel to the shale bedding than that perpendicular to the bedding. The Ca leaching region can be an index for reaction front detection for Marcellus shale. Reactive transport modeling was conducted and the predicted Ca leaching boarder align well with ferrihydrite precipitation, consistent with the experimental observation. The carbonate mineral dissolution can be crucial to promote fluid access into the shale matrix. Together with our previous study on the shale reactive surface, this follow-up study showed similar Ca leaching region and Fe(III) precipitates distribution in the reaction front regardless of barite precipitation on the surface, indicating that the barite coatings on the surface may not pose a significant impact on reactive transport at the shale-fluid interface.

04 OIL SHALES AND TAR SANDS↗

Model-Based Extracted Water Desalination System for Carbon Sequestration

Over the last 1.5 years, GE Global Research and Pennsylvania State University defined a model-based, scalable, and multi-stage extracted water desalination system that yields clean water, concentrated brine, and, optionally, salt. The team explored saline brines that ranged across the expected range for extracted water for carbon sequestration reservoirs (40,000 up to 220,000 ppm total dissolved solids, TDS). In addition, the validated the system performance at pilot scale with field-sourced water using GE’s pre-pilot and lab facilities. This project encompassed four principal tasks, in addition to Project Management and Planning: 1) identify a deep saline formation carbon sequestration site and a partner that are suitable for supplying extracted water; 2) conduct a techno-economic assessment and down-selection of pre-treatment and desalination technologies to identify a cost-effective system for extracted water recovery; 3) validate the downselected processes at the lab/pre-pilot scale; and 4) define the scope of the pilot desalination project. Highlights from each task are described below: Deep saline formation characterization The deep saline formations associated with the five DOE NETL 1260 Phase 1 projects were characterized with respect to their mineralogy and formation water composition. Sources of high TDS feed water other than extracted water were explored for high TDS desalination applications, including unconventional oil and gas and seawater reverse osmosis concentrate. Technoeconomic analysis of desalination technologies Techno-economic evaluations of alternate brine concentration technologies, including humidification-dehumidification (HDH), membrane distillation (MD), forward osmosis (FO), turboexpander-freeze, solvent extraction and high pressure reverse osmosis (HPRO), were conducted. These technologies were evaluated against conventional falling film-mechanical vapor recompression (FF-MVR) as a baseline desalination process. Furthermore, a quality function deployment (QFD) method was used to compare alternate high TDS desalination technologies to FF-MVR. High pressure reverse osmosis was found to a be a promising alternative desalination technology. A deep-dive technoeconomic analysis of HPRO was performed, including Capex and Opex estimates, for seawater RO (SWRO). Additionally, two additional cases were explored: 1) a comparison of a SWRO plus HPRO system to the option of doubling the size of a standard seawater RO system to achieve the same total pure water recovery rate; and 2) a flue gas desulfurization wastewater treatment zero-liquid discharge (ZLD) application, where preconcentration with RO (SWRO or SWRO + HPRO) before evaporation and crystallization was compared to FF-MVR and crystallization technologies without RO preconcentration. Pre-pilot process validation Pre-pilot-scale tests were conducted using field production water to validate key process steps for extracted water pretreatment. Approximately 5,000 gallons of field produced water was processed through, microfiltration, ultrafiltration, and steam regenerable sorbent operations. Smaller quantities were processed through microclarification. In addition, analytical methods (purge-and-trap gas chromatography and Hach TOC analytical methods) were validated. Lab-scale HPRO elements were constructed and tested at high pressures, to identify and mitigate technical risks of the technology. Lastly, improvements in RO membrane materials were identified as the necessary next step to achieve further improvement in element performance at high pressure. Scope of Field Pilot A field pilot for extracted water pretreatment was designed.

20 FOSSIL-FUELED POWER PLANTS↗

Thermochemistry of Calcium-Magnesium-Aluminum-Silicate (CMAS) and Components of Advanced Thermal and Environmental Barrier Coating Systems

There is increasing interest in the degradation mechanism studies of thermal and environmental barrier coatings (TEBCs) of gas turbines by molten CaO-MgO-Al(exp. 2)O(exp. 3)-SiO(exp. 2) CMAS). CMAS minerals are usually referred as silicon-containing sand dust and volcano ash materials that are carried by the intake air into gas turbines, e.g. in aircraft engines, and their deposits often react at high temperatures (greater than 1200 degrees C) with the engine turbine coating systems and components. The high temperature reactions causes degradation and accelerated failure of the static and rotating components of the turbine engines. We discuss some results of the reactions between the CMAS and Rare-Earth (RE = Y, Yb, Dy, Gd, Nd and Sm) - oxide stabilized ZrO(exp. 2) or HfO(exp. 2) systems, and the stability of the resulting oxides and silicates. Plasma sprayed hollow tube samples (outside diameter = 4.7 mm, wall thickness = 0.76 mm and = 26 mm height) were half filled with CMAS powder, wrapped and sealed with platinum foil, and heat treated at 1310 degrees C for 5h. Samples were characterized by differential scanning calorimetry (DSC), X-ray diffraction, and cross-section electron microscopy analysis and energy dispersive X-ray spectroscopy. It was found that CMAS penetrated the samples at the grain boundaries and dissolved the TEBC materials to form silicate phases containing the rare-earth elements. Furthermore, it was found that apatite crystalline phases were formed in the samples with total rare-earth content higher than 12 mol% in the reaction zone for the ZrO(exp. 2) system. In general, samples with the nominal compositions (30YSZ), HfO(exp. 2)-7Dy(exp. 2)O(exp. 2) and ZrO(exp. 2)-9.5Y(exp. 2)O(exp. 3)-2.25Gd(exp. 2)O(exp. 3)-2.25Yb(exp. 2)O(exp. 3) exhibited lower reactivity or more resistance to CMAS than the other coating compositions of this work.

degradation↗

Members of the Genus Methylobacter Are Inferred To Account for the Majority of Aerobic Methane Oxidation in Oxic Soils from a Freshwater Wetland

ABSTRACT Microbial carbon degradation and methanogenesis in wetland soils generate a large proportion of atmospheric methane, a highly potent greenhouse gas. Despite their potential to mitigate greenhouse gas emissions, knowledge about methane-consuming methanotrophs is often limited to lower-resolution single-gene surveys that fail to capture the taxonomic and metabolic diversity of these microorganisms in soils. Here our objective was to use genome-enabled approaches to investigate methanotroph membership, distribution, and in situ activity across spatial and seasonal gradients in a freshwater wetland near Lake Erie. 16S rRNA gene analyses demonstrated that members of the methanotrophic Methylococcales were dominant, with the dominance largely driven by the relative abundance of four taxa, and enriched in oxic surface soils. Three methanotroph genomes from assembled soil metagenomes were assigned to the genus Methylobacter and represented the most abundant methanotrophs across the wetland. Paired metatranscriptomes confirmed that these Old Woman Creek (OWC) Methylobacter members accounted for nearly all the aerobic methanotrophic activity across two seasons. In addition to having the capacity to couple methane oxidation to aerobic respiration, these new genomes encoded denitrification potential that may sustain energy generation in soils with lower dissolved oxygen concentrations. We further show that Methylobacter members that were closely related to the OWC members were present in many other high-methane-emitting freshwater and soil sites, suggesting that this lineage could participate in methane consumption in analogous ecosystems. This work contributes to the growing body of research suggesting that Methylobacter may represent critical mediators of methane fluxes in freshwater saturated sediments and soils worldwide. IMPORTANCE Here we used soil metagenomics and metatranscriptomics to uncover novel members within the genus Methylobacter . We denote these closely related genomes as members of the lineage OWC Methylobacter . Despite the incredibly high microbial diversity in soils, here we present findings that unexpectedly showed that methane cycling was primarily mediated by a single genus for both methane production (“ Candidatus Methanothrix paradoxum”) and methane consumption (OWC Methylobacter ). Metatranscriptomic analyses revealed that decreased methanotrophic activity rather than increased methanogenic activity possibly contributed to the greater methane emissions that we had previously observed in summer months, findings important for biogeochemical methane models. Although members of this Methylococcales order have been cultivated for decades, multi-omic approaches continue to illuminate the methanotroph phylogenetic and metabolic diversity harbored in terrestrial and marine ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗

Chlorination of uranium metal in molten NaCl-CaCl 2 via bubbling HCl

Molten chloride salt fast reactors (MCFRs) will require UCl 3 dissolved in molten salt mixtures as fuel for nuclear fission. For infusing the salt with UCl 3 , bubbling HCl into NaCl-CaCl 2 in contact with U metal was investigated. The reaction was run up to 9 h and yielded U concentration up to 0.652 wt.%. Open circuit potential between a W electrode and Ag/AgCl reference electrode yielded a potential consistent with uranium existing as U(III) in the salt. Furthermore, this demonstrates that HCl can be a very effective chlorinating agent to infuse MCFR fuel with UCl 3 starting from U metal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Report on the effect of dopants on FLASH sintering of enhanced UO 2

Large grained UO 2 can be achieved through the addition of dopants such as, Cr, Al, Nb and Mg. The enhanced microstructure can enable slower fission gas release that reduces pressure build up in the fuel rods and better mechanical properties that can alter the pellet cracking behavior and, therefore, limit accident prone pellet cladding loading. UO 2 fuel is sintered through conventional sintering methods that require high temperatures and long sintering times. Field assisted sintering techniques like flash sintering use current and voltage to enable sintering of ceramics at low temperatures and short times. Flash sintering has been demonstrated for sintering UO 2 to high densities. In this work, this technique has been applied to Cr-doped UO 2 to assess the feasibility of the technique for grain enhancement. Doped UO 2 samples below and above the solubility limit of Cr into UO 2 have been assessed. The results show that grain enhancement was not possible in either case and this was attributed to the low temperatures and sintering times that make flash sintering attractive. For the Cr-doped sample below or near the solubility of Cr, it is postulated that the temperatures were not high enough to actually dissolve it into solution in the UO 2 lattice. For the Cr-doped sample above the solubility limit of Cr, secondary phases were identified via SEM and EDS, as expected. Follow up work should be carried out to assess if flash sintering can produce grain enlargement for UO 2 feedstocks with dopants already in solid solution such as UO 2 produced via sol-gel or modified direct denitration method.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Final Report for the Project Characterization and Valorization of Aqueous Phases Derived from Liquefaction and Upgrading of Bio-Oils

The Characterization and Valorization of Aqueous Phases Derived from Liquefaction and Upgrading of Bio-Oils project developed processes to extract value from the organics within aqueous streams derived from biomass direct liquefaction processes. The focus of the project was twofold. First, we characterized a diverse set of aqueous streams from numerous processes and feedstocks. The characterization effort served to inform this project toward development around the most prevalent compounds to maximize versatility and impact. We analyzed diverse streams from hydrothermal liquefaction of lignocellulosic, algal, and waste feedstocks; catalytic fast-pyrolysis aqueous phases; fast-pyrolysis aqueous phases; and aqueous phases produced by hydroprocessing of fast-pyrolysis bio-oil. Second, thermochemical catalytic processes were developed to convert aqueous-phase organics into useful products. These processes focused mostly on organic acids and specifically acetic acid, which was found to be ubiquitous from the characterization effort. A La x Zr y O z catalyst was discovered and developed for the ketonization of acids to ketones in the condensed aqueous phase. A dual-bed steam reforming process was developed to convert acids and other organics to hydrogen for bio-oil hydroprocessing. The dual-bed reforming process consisted of a ketonization step followed by a steam reforming step with Co as the active metal. The dual-bed process significantly reduced the rate of coke deposition versus direct steam reforming of the organic acids and beneficially produced CH 4 below the equilibrium value. Finally, we demonstrated direct conversion of aqueous-phase organics to olefins over a Zn x Zr y O z catalyst. Each thermochemical catalytic process was demonstrated with process-derived aqueous mixtures. Model compounds were used to benchmark performance and optimize conditions, but emphasis was placed on utilizing “real” aqueous streams whenever possible. A liquid-liquid extraction process using methyl tert-butyl ether as the solvent was developed to segregate dissolved inorganic species and sugars from desirable light oxygenates such as acids and alcohols. Furthermore, a carbon treatment to remove color bodies was employed after it was found the presumably heavy organic chromophore species deactivated catalysts. These economic separation processes allowed for the successful demonstration of stable catalytic processing in the condensed-phase ketonization, dual-bed reforming, and direct olefin production processes for tens to hundreds of hours, which were limited only by the quantity of feed available. Techno-economic analysis of these processes demonstrated the impact possible when capturing “waste” organics as valuable products. The condensed-phase ketonization process for converting aqueous stream acids to ketones followed by reduction and dehydration to olefins sold as a co-product resulted in the reduction of the minimum fuel selling price by about 13% compared to the anaerobic-digestion, aqueous-phase treatment base case (3.74 to 4.29/GGE). The dual-bed reforming process was commensurate in price to the anaerobic digestion base case (4.24 versus 4.29/GGE). However, the need for external natural gas to produce hydrogen for bio-oil hydroprocessing was eliminated, thereby lowering the carbon impact of the process.

09 BIOMASS FUELS↗

CO 2 storage in the Paluxy formation at the Kemper County CO 2 storage complex: Pore network properties and simulated reactive permeability evolution

The Paluxy formation is being considered as a prospective CO 2 reservoir at the Kemper County CO 2 Storage Complex. Herein, the pore and pore-throat size distributions and connectivity of the Paluxy formation is evaluated through analysis of 3D X-ray Computed Tomography images. In spite of resolution limitations that constrain the pore-throat sizes detectable by imaging, the permeability contributing pore-throats are successfully characterized through 3D imaging analysis. Image-obtained pore and pore-throat size distributions and pore connectivity are then utilized to construct pore network models and simulate permeability. After CO 2 is injected, it will dissolve into formation brine and create conditions favorable for dissolution of primary minerals and precipitation of secondary minerals. These reactions will alter the porosity and permeability of the system to varying degrees depending on the spatial location of reactions. In this research, the possible porosity-permeability evolution is simulated using pore network models considering mineral reactions occurring uniformly and non-uniformly throughout the network. For a given change in porosity, there is a large range of possible permeability outcomes. Depending on the extent and spatial location of mineral reactions, permeability may decrease by more than one order of magnitude as minerals precipitate. During dissolution, simulated permeability increases as much as 500%.

03 NATURAL GAS↗

Measuring the Chemical Potential of the Martian Regolith to Generate and Sustain Life

A critical component for identifying chemical biosignatures is the ability to assess in-situ the potential of an aqueous geochemical environment to generate and sustain life. On Mars or other solar bodies, in-situ chemical characterization could provide evidence as to whether the chemical composition of the regolith or evaporites in suspected ancient water bodies have been biologically influenced or possess the chemical parameters within which life may have existed, or may still exist. A variety of analytical techniques have been proposed for use in detecting and identify signatures of past or present life. These techniques fall into two groups; visual observation with instruments such as cameras or optical/atomic-force microscopes; or elemental chemical analysis with such instruments as X-ray fluorescence (XRF) and diffraction (XRD), a-proton backscatter (APX), y-ray, Mossbauer, Raman, IR, UV/VIS spectroscopies, gas chromatography (GC), or mass spectrometry (MS). Direct observation of an identifiable lifeform by the first set of instruments in a single sample is highly unlikely, especially for extinct organisms or on the surface. The later instruments can provide vital data as to the elemental mineralogy and geological history of the planet, but are highly inadequate for understanding the chemistry of the planet in terms of indigenous life or interactions with human explorers. Techniques such as XRD, XRF, and APX, provide elemental composition at high limits of detection. Some of this data can be extrapolated or interpolated to provide chemical parameters such as oxidation state or composition. Gas chromatography (GC) without standards and non-specific detectors, has little chance of identifying a mixture of unknown components. Combined with GC or by itself, mass spectrometry (MS) can provide identification of compounds, but in both cases the sample must be appropriately prepared for accurate and reliable analysis. Life as we know it, and probably identify it as such, requires an aqueous environment. Deciphering die chemical speciation of this aqueous environment is the key to recognizing therein the biosignatures of any extinct or present life forms. Identifying the soluble (ionic and nonionic) components by reacting a currently dormant environment can provide a "picture" of the thermodynamics and chemical components of a possibly bioactive environment. The only devices which can provide such information are electrochemical sensors based on the potentiometric ion selective electrodes (ISEs) and on dynamic techniques such as cyclic voltammetry (CV) and stripping voltammetry (SV). Such an array of devices can provide not only the chemical composition of a water-soluble Martian soil sample, but also several other vital chemical parameters such as pH, conductivity, redox potential, and dissolved gases. To address these issues we have been investigating the possible use of an electrochemically-based ion sensor array as a new integrated approach to quantitative analytical and chemometric electrochemical measurements. The sensor array will consist of specific and semispecific ion selective and amperometric transducers, which can simultaneously and continuously identify and semiquantitatively determine over 50 organic and inorganic analytes in water-based environments. Several individual sensors, based on the same principle, have been flight-tested and have been installed as part of the MECA instrumentation on the Mars 2001 Lander for in-situ analyses. However, the microfabrication, integration and multiplexing of such a large number of these sensors on a single substrate have not been previously attempted.

Kounaves, S. P.↗

The Great Inequality and the Dynamical Disintegration of the Outer Solar System

Using an ensemble of N-body simulations, this paper considers the fate of the outer gas giants (Jupiter, Saturn, Uranus, and Neptune) after the Sun leaves the main sequence and completes its stellar evolution. Due to solar mass loss—which is expected to remove roughly half of the star’s mass—the orbits of the giant planets expand. This adiabatic process maintains the orbital period ratios, but the mutual interactions between planets and the width of mean-motion resonances (MMR) increase, leading to the capture of Jupiter and Saturn into a stable 5:2 resonant configuration. The expanded orbits, coupled with the large-amplitude librations of the critical MMR angle, make the system more susceptible to perturbations from stellar flyby interactions. Accordingly, within about 30 Gyr, stellar encounters perturb the planets onto the chaotic subdomain of the 5:2 resonance, triggering a large-scale instability, which culminates in the ejections of all but one planet over the subsequent ∼10 Gyr. After an additional ∼50 Gyr, a close stellar encounter (with a perihelion distance less than ∼200 au) liberates the final planet. Through this sequence of events, the characteristic timescale over which the solar system will be completely dissolved is roughly 100 Gyr. Our analysis thus indicates that the expected dynamical lifetime of the solar system is much longer than the current age of the universe, but is significantly shorter than previous estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling CO 2 -Brine-Rock Interaction Including Mercury and H 2 S Impurities in the Context of CO 2 Geologic Storage

This study uses modeling and simulation approaches to investigate the impacts on injectivity of trace amounts of mercury (Hg) in a carbon dioxide (CO 2 ) stream injected for geologic carbon sequestration in a sandstone reservoir at ~2.5 km depth. At the range of Hg concentrations expected (7-190 ppbV, or ~ 0.06-1.6 mg/std.m 3 CO 2 ), the total volumetric plugging that could occur due to complete condensation of Hg, or due to complete precipitation of Hg as cinnabar, results in a very small porosity change. In addition, Hg concentration much higher than the concentrations considered here would be required for Hg condensation to even occur. Concentration of aqueous Hg by water evaporation into CO 2 is also unlikely because the higher volatility of Hg relative to H 2 O at reservoir conditions prevents the Hg concentration from increasing in groundwater as dry CO 2 sweeps through, volatilizing both H 2 O and Hg. Using a model-derived aqueous solution to represent the formation water, batch reactive geochemical modeling show that the reaction of the formation water with the CO 2 -Hg mixture causes the pH to drop to about 4.7 and then become buffered near 5.2 upon reaction with the sediments, with a negligible net volume change from mineral dissolution and precipitation. Cinnabar (HgS(s)) is found to be thermodynamically stable as soon as the Hg-bearing CO 2 reacts with the formation water which contains small amounts of dissolved sulfide. Liquid mercury (Hg(l)) is not found to be thermodynamically stable at any point during the simulation. Two-dimensional radial reactive transport simulations of CO 2 injection at a rate of 14.8 kg/s into a 400 m-thick formation at isothermal conditions of 106°C and average pressure near 215 bar, with varying amounts of Hg and H 2 S trace gases, show generally that porosity changes only by about ±0.05% (absolute, i.e., new porosity = initial porosity ±0.0005) with Hg predicted to readily precipitate from the CO 2 as cinnabar in a zone mostly matching the single-phase CO 2 plume. The precipitation of minerals other than cinnabar, however, dominates the evolution of porosity. Main reactions include the replacement of primarily Fe-chlorite by siderite, of calcite by dolomite, and of K-feldspar by muscovite. Chalcedony is also predicted to precipitate from the dissolution of feldspars and quartz. Although the range of predicted porosity change is quite small, the amount of dissolution and precipitation predicted for these individual minerals is not negligible. These reactive transport simulations assume that Hg gas behaves ideally. To examine effects of non-ideality on these simulations, approximate calculations of the fugacity coefficient of Hg in CO 2 were made. Results suggest that Hg condensation could be significantly overestimated when assuming ideal gas behavior, making our simulation results conservative with respect to impacts on injectivity. The effect of pressure on Henry’s constant for Hg is estimated to yield Hg solubilities about 10% lower than when this effect is not considered, a change that is considered too small to affect the conclusions of this report. Although all results in this study are based on relatively mature data and modeling approaches, in the absence of experimental data and more detailed site-specific information, it is not possible to fully validate the results and conclusions.

54 ENVIRONMENTAL SCIENCES↗