Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIRECT REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Effect of Aluminum Dissolved in Hematite on Formation of Calcium Ferrites at 1473 K

Silico-ferrite of calcium and aluminum (SFCA) is a primary bonding phase, which determines the quality of high basicity sinter used widely as raw materials in blast furnace ironmaking. Calcium ferrite containing aluminum (CFA) is a key precursor during the formation process of SFCA and is influenced by Al{sub 2}O{sub 3} content in iron ore fines. In this work, the experiment was conducted to investigate the effect of the aluminum occurrence state on the formation of calcium ferrite by the simulating sintering process of different types of aluminum-bearing hematite at 1473 K. X-ray diffraction, optical microscope, scanning electron microscopy, and energy-dispersive spectroscopy were used to characterize the mineral change in sintered samples. The result shows that the formation of CFA was promoted by both granular Al{sub 2}O{sub 3} wrapped in Fe{sub 2}O{sub 3} and aluminum dissolved in Fe{sub 2}O{sub 3} solid solution, especially for the latter, due to the formation of the CFA directly from the reaction between Fe{sub 2}O{sub 3}-Al{sub 2}O{sub 3} solid solution and CaO, and the aluminum content in CFA formed was influenced obviously by the solid solution amount of alumina into Fe{sub 2}O{sub 3} as raw materials.

36 MATERIALS SCIENCE↗

Toward hydrogen economy: Selective guaiacol hydrogenolysis under ambient hydrogen pressure

The conversion of guaiacol into the nylon precursors, cyclohexanol and cyclohexanone, is catalyzed by palladium supported on high surface area ceria (Pd/HS CeO 2 ) under mild conditions (100 °C, ≤1 bar H 2 ) via sequential hydrodemethoxylation and hydrogenation. In contrast, the 2-methoxycyclohexanol side product is generated by direct guaiacol hydrogenation. Reaction selectivity is determined by competing CO bond hydrogenolysis versus arene hydrogenation. Hydrogenolysis selectivity increases as H 2 pressure decreases, and over 80 % H 2 is incorporated into the products at 1 bar H 2 . Higher reactivity of guaiacol than anisole implies that the hydroxyl group is essential in Pd/HS CeO 2 catalysis. Participation of water in the conversion is evidenced by deuterium incorporation at non-exchangeable positions when the reaction is performed in D 2 O. Here, the combination of near quantitative mass balance of H 2 , high recyclability, and use of water as a solvent offers a simple, green and efficient conversion of lignin-derived aromatics into commercial products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automated cassette-based production of high specific activity [ 203/212 Pb]peptide-based theranostic radiopharmaceuticals for image-guided radionuclide therapy for cancer

A method for preparation of Pb-212 and Pb-203 labeled chelator-modified peptide-based radiopharmaceuticals for cancer imaging and radionuclide therapy has been developed and adapted for automated clinical production. Pre-concentration and isolation of radioactive Pb2+ from interfering metals in dilute hydrochloric acid was optimized using a commercially-available Pb-specific chromatography resin packed in disposable plastic columns. The pre-concentrated radioactive Pb2+ is eluted in NaOAc buffer directly to the reaction vessel containing chelator-modified peptides. Radiolabeling was found to proceed efficiently at 85 °C (45 min; pH 5.5). The specific activity of radiolabeled conjugates was optimized by separation of radiolabeled conjugates from unlabeled peptide via HPLC. Preservation of bioactivity was confirmed by in vivo biodistribution of Pb-203 and Pb-212 labeled peptides in melanoma-tumor-bearing mice. The approach has been found to be robustly adaptable to automation and a cassette-based fluid-handling system (Modular Lab Pharm Tracer) has been customized for clinical radiopharmaceutical production. Our findings demonstrate that the Pb-203/Pb-212 combination is a promising elementally-matched radionuclide pair for image-guided radionuclide therapy for melanoma, neuroendocrine tumors, and potentially other cancers.

59 BASIC BIOLOGICAL SCIENCES↗

Measurements of combustion properties in a microwave enhanced flame

Microwave induced flame speed enhancement is quantified in a laminar, premixed CH{sub 4}/air wall stagnation flat flame. Experiments were performed in a high Q microwave cavity with the cavity tuned so that the maximum microwave field is located in the vicinity of a flat flame front. Equivalence ratios were varied between 0.6 and 0.8. When the flame is radiated by a continuous wave microwave field of approximately 5 kV/cm, the flame front is observed to move towards the burner exit and stabilize at a standoff distance corresponding to a flame speed increase of up to 20%. No microwave discharge is observed, indicating that the enhanced flame speed arises from microwave energy deposited directly into the reaction zone through coupling to the weakly ionized gas in that region. Laser diagnostics were performed to quantify temperature increase, the laminar flame speed enhancement, and changes in the OH radical concentration through filtered Rayleigh scattering, particle image velocimetry, and planar laser induced fluorescence, respectively. These measurements indicate that microwave radiation may prove to be an effective means to non-invasively control and enhance flame stability in combustors. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials

Artificial barriers, usually with either electrochemically active or inactive coating materials, are deployed on cathode material surfaces to mitigate detrimental side reactions by suppressing direct contact of cathode and electrolyte called surface coatings. These surface coatings are commonly known to increase the wettability of liquid electrolyte and reduce the interfacial charge transfer resistance. An important caveat is the selection of appropriate coating material with appropriate thickness for achieving enhanced electrochemical performance. As modern battery materials are increasingly developed with some type of surface coating, a careful and thorough examination of their role in mitigating the cycle life issues of cathode materials is paramount. Here, this comprehensive review article extensively covers the selection criteria of coating materials based on their chemical and physical properties and electrochemical functionalities. Additionally, the article discusses the concept of critical coating thickness and methods of achieving homogeneous coating architectures that deliver desired performance benefits. Furthermore, this comprehensive article summarizes the recent advancements, effectiveness, necessity of cathode surface coatings and identifies the key aspect of structure-property correlation between coating type/thickness and lithium-ion diffusion through coating layers as the linchpin that validates surface coating approaches especially for high capacity nickel-rich cathodes.

25 ENERGY STORAGE↗

Co-precipitation induces changes to iron and carbon chemistry and spatial distribution at the nanometer scale

Association of organic matter (OM) with mineral phases via co-precipitation is expected to be a widespread process in environments with high OM input and frequent mineral dissolution and re-precipitation. In contrast to surface area-limited adsorption processes, co-precipitation may allow for greater carbon (C) accumulation. However, the potential sub-micrometer scale structural and compositional differences that affect the bioavailability of co-precipitated C are largely unknown. In this work, we used a combination of high-resolution analytical electron microscopy and bulk spectroscopy to probe interactions between a mineral phase (ferrihydrite, nominally Fe 2 O 3 •0.5H 2 O) and organic soil-derived water-extractable OM (WEOM). In co-precipitated WEOM-Fe, nanometer-scale scanning transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS) revealed increased Fe(II) and less Fe aggregation relative to adsorbed WEOM-Fe. Spatially distinct lower- and higher-energy C regions were detected in both adsorbed and co-precipitated WEOM-Fe. In co-precipitates, lower-energy aromatic and/or substituted aromatic C was spatially associated with reduced Fe(II), but higher-energy oxidized C was enriched at the oxidized Fe(III) interface. Therefore, we show that co-precipitation does not constitute a non-specific physical encapsulation of C that only affects Fe chemistry and spatial distribution, but may cause a bi-directional set of reactions that lead to spatial separation and transformation of both Fe and C forms. In particular, we propose that abiotic redox reactions between Fe and C via substituted aromatic groups (e.g., hydroquinones) play a role in creating distinct co-precipitate composition, with potential implications for its mineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and magnetic properties of ALnO{sub 2} (A=Cu or Ag; Ln=rare earths) with the delafossite structure

Synthesis, structures, and magnetic properties of ternary rare earth oxides ALnO{sub 2} (A=Cu or Ag; Ln=rare earths) have been investigated. CuLnO{sub 2} (Ln=La, Pr, Nd, Sm, Eu) were synthesized by the direct solid state reaction of Cu{sub 2}O and Ln{sub 2}O{sub 3}, and AgLnO{sub 2} (Ln=Tm, Yb, Lu) were obtained by the cation-exchange reaction of NaLnO{sub 2} and AgNO{sub 3} in a KNO{sub 3} flux. These compounds crystallized in the delafossite-type structure with the rhombohedral 3R type (space group: R-3m). Magnetic susceptibility measurements showed that these compounds are paramagnetic down to 1.8 K. Specific heat measurements down to 0.4 K indicated that CuNdO{sub 2} ordered antiferromagnetically at 0.8 K. - Graphical abstract: Ternary rare earth oxides ALnO{sub 2} (A=Cu or Ag; Ln=rare earths) crystallized in the delafossite-type structure with the rhombohedral 3R poly-type (space group: R-3m). Magnetic susceptibility measurements showed that these compounds are paramagnetic down to 1.8 K. Specific heat measurements down to 0.4 K indicated that CuNdO{sub 2} ordered antiferromagnetically at 0.8 K.

36 MATERIALS SCIENCE↗

Probing the topological charge in QCD matter via multiplicity up–down asymmetry

Relativistic heavy ion collisions provide the possibility to study the topological charge in QCD matter through the event-by-event fluctuating net axial charge or nonequal numbers of left- and right-handed quarks they generate in the produced quark–gluon plasma. Based on the chiral kinetic approach for nearly massless quarks and antiquarks in the strong vorticity field produced along the normal direction of the reaction plane of non-central heavy ion collisions, we show that a unique signal for the topological charge in QCD matter can be identified from the asymmetric distribution of particles with momenta pointing to the upper and lower hemispheres of the reaction plane as a result of the fluctuating net axial charge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THERMOREGULATION AND ITS INFLUENCE ON TOXICITY ASSESSMENT

The thermoregulatory system of laboratory rodents is susceptible to a variety of chemical toxicants. Because temperature directly affects the reaction of virtually all biological processes, it is critical to consider how changes in the thermoregulatory response to a toxicant may affect physiological, behavioral, and pathological endpoints. Researchers in industry and government laboratories are often faced with addressing how changes in body temperature of their experimental subjects may affect the outcome of a particular toxicity test and/or screening panel. However, many toxicologists are either unaware of the importance or ignore the potential impact of a toxic-induced change in body temperature. This paper endeavors to summarize the importance of thermoregulation in the study of toxicology and propose recommendations for thermometry that researchers may utilize in their toxicological studies.

59 BASIC BIOLOGICAL SCIENCES↗

Operando Surface-Enhanced Infrared Spectroscopy Connects Interfacial Dynamics with Reaction Kinetics During Electrochemical CO 2 Reduction on Copper

The reaction microenvironment plays a key role in dictating the selectivity of electrochemical CO 2 reduction. However, understanding the chemical nature of this microenvironment under operating conditions remains a substantial challenge. For this study, we employed attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) in operando for simultaneous measurements of reaction kinetics and concentrations of reactants and intermediates at the reaction interface, all under controlled mass transport conditions. These operando measurements enable direct correlations between the reaction microenvironment, mass transport, and kinetics for a Cu electrocatalyst, such as higher local concentrations of CO 2 under faster mass transport corresponding to higher rates of CO 2 reduction. We observed that faster mass transport decreased the *CO coverage at less negative potentials (-0.6 V RHE ) and increased the *CO coverage at more negative potentials (-1.1 V RHE ). We developed a transport-coupled kinetic model that captures these spectroscopic observations and provides insight into the processes controlling interfacial concentrations of reactants and intermediates, aiding future efforts toward tailoring reaction microenvironments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms of the Cu(I)-Catalyzed Intermolecular Photocycloaddition Reaction Revealed by Optical and X-ray Transient Absorption Spectroscopies

The [2 + 2] photocycloaddition provides a simple, single-step route to cyclobutane moieties that would otherwise be disfavored or impossible due to ring strain and/or steric interactions. We have used a combination of optical and X-ray transient absorption spectroscopies to elucidate the mechanism of the Cu(I)-catalyzed intermolecular photocycloaddition reaction using norbornene and cyclohexene as model substrates. We find that for norbornene the reaction proceeds through an initial metal-to-ligand charge transfer (MLCT) state that persists for 18 ns before the metal returns to the monovalent oxidation state. The Cu K-edge spectrum continues to evolve until ~5 μs and then remains unchanged for the 50 μs duration of the measurement, reflecting product formation and ligand dissociation. We hypothesize that the MLCT transition and reverse electron transfer serve to sensitize the triplet excited state of one of the norbornene ligands, which then dimerizes with the other to give the product. For the case of cyclohexene, however, we do not observe a charge transfer state following photoexcitation and instead find evidence for an increase in the metal–ligand bond strength that persists for several ns before product formation occurs. This is consistent with a mechanism in which ligand photoisomerization is the initial step, which was first proposed by Salomon and Kochi in 1974 to explain the stereoselectivity of the reaction. Furthermore, our investigation reveals how this photocatalytic reaction may be directed along strikingly disparate trajectories by only very minor changes to the structure of the substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic Insights into Defect-Mediated Crystallization Revealed by Lattice Strain Evolution

Structural defects and lattice strain are intrinsic to many crystalline materials, yet their roles in controlling chemical reaction mechanisms and directing crystallization pathways remain poorly understood. Here, in this study, we revealed the three-dimensional evolution of strain and dislocation defects at the nanoscale during the growth of heterogeneously nucleated barite (BaSO 4 ) and calcite (CaCO 3 ) crystals by using coherent X-ray scattering, electron microscopy, and molecular simulations. Unlike barite, which formed with minimal internal strain, calcite developed dislocation defects and exhibited spatially varying strain that increased during growth. During growth in Sr-rich solutions, calcite likely incorporates Sr 2+ into the defects, which further modulates the local lattice structure and increases both the compressive and tensile strain. These findings suggest that calcite crystallization was likely dominated by attachment of precursor phases, which gave rise to defect-enriched domain structures not predicted by classical growth models. By linking defect formation to ion incorporation and growth dynamics, this work provides fundamental insight into how lattice-level strain heterogeneity governs the chemical reactivity of ionic crystals.

Bragg coherent diffractive imaging↗

Sequential slip transfer of mixed-character dislocations across Σ3 coherent twin boundary in FCC metals: a concurrent atomistic-continuum study

Sequential slip transfer across grain boundaries (GB) has an important role in size-dependent propagation of plastic deformation in polycrystalline metals. For example, the Hall–Petch effect, which states that a smaller average grain size results in a higher yield stress, can be rationalised in terms of dislocation pile-ups against GBs. In spite of extensive studies in modelling individual phases and grains using atomistic simulations, well-accepted criteria of slip transfer across GBs are still lacking, as well as models of predicting irreversible GB structure evolution. Slip transfer is inherently multiscale since both the atomic structure of the boundary and the long-range fields of the dislocation pile-up come into play. In this work, concurrent atomistic-continuum simulations are performed to study sequential slip transfer of a series of curved dislocations from a given pile-up on Σ3 coherent twin boundary (CTB) in Cu and Al, with dominant leading screw character at the site of interaction. A Frank-Read source is employed to nucleate dislocations continuously. It is found that subject to a shear stress of 1.2 GPa, screw dislocations transfer into the twinned grain in Cu, but glide on the twin boundary plane in Al. Moreover, four dislocation/CTB interaction modes are identified in Al, which are affected by (1) applied shear stress, (2) dislocation line length, and (3) dislocation line curvature. Our results elucidate the discrepancies between atomistic simulations and experimental observations of dislocation-GB reactions and highlight the importance of directly modeling sequential dislocation slip transfer reactions using fully 3D models.

36 MATERIALS SCIENCE↗

Single-molecule reaction mapping uncovers diverse behaviours of electrocatalytic surface Pd–H intermediates

Many vital electrocatalytic transformations hinge on reactive surface metal–hydrogen intermediates (M–H*), yet the low concentration and transient nature of such intermediates present formidable challenges to in-depth investigation. Here we use single-molecule super-resolution reaction imaging to directly probe surface palladium–hydrogen (Pd–H*) intermediates on individual palladium nanocubes during electrocatalytic hydrogen evolution. Our approach visualizes hydrogen spillover from palladium to the surrounding substrate surface over hundreds of nanometres away and dissects substantial inter- and intraparticle heterogeneity. Through Gaussian-broadening kinetic analysis, we reveal that ensemble-averaged measurements systematically overestimate the stability of Pd–H*. Moreover, we resolve three subpopulations of palladium nanocubes with distinct reactivity features, uncovering critical correlations between intermediate stability, hydrogenation reactivity and transition-state properties. Finally, our findings highlight the necessity of single-particle resolution for capturing the intrinsic complexity of electrocatalysts; our approach is also broadly applicable to interrogate surface-reactive intermediates across a wide array of electrocatalytic pathways.

electrocatalysis↗

Rate constants for H abstraction from benzo(a)pyrene and chrysene: a theoretical study

Density functional B3LYP/6-31G(d) and ab initio G3(MP2,CC) calculations have been carried out to determine thermal rate constants of direct H abstraction reactions from four- and five-ring polycyclic aromatic hydrocarbons (PAH) chrysene and benzo[a]pyrene by various radicals abundant in combustion flames, such as H, CH 3 , C 3 H 3 , and OH, using transition state theory. The results show that the H abstraction reactions with OH have the lowest barriers of ~4 kcal mol -1 , followed by those with H and CH 3 with barriers of 16–17 kcal mol -1 , and then with propargyl radicals with barriers of 24–26 kcal mol -1 . Thus, the OH radical is predicted to be the fastest H abstractor from PAH. Even at 2500 K, the rate constant for H abstraction by H is still 34% lower than the rate constant for H abstraction by OH. The reaction with H is calculated to have rate constants 35–19 times higher than those for the reaction with CH 3 due to a more favorable entropic factor. The reactions of H abstraction by C 3 H 3 are predicted to be orders of magnitude slower than the other reactions considered and their equilibrium is strongly shifted toward the reactants, making propargyl an inefficient H abstractor from the aromatics. The calculations showed strong similarity of the reaction energetics in different H abstraction positions of benzo[a]pyrene and chrysene within armchair and zigzag edges in these molecules, but clear distinction between the armchair and zigzag sites. The zigzag sites appear to be more reactive, with H abstraction rate constants by H, CH 3 , and OH being respectively 37–42%, a factor of 2.1, and factors of 8–9 higher than the corresponding rate constants for the H abstraction reactions from armchair sites. Although the barrier heights for the two types of edges are similar, the entropic factor makes zigzag sites more favorable for H abstraction. Rate expressions have been generated for all studied reactions with the goal to rectify current combustion kinetics mechanisms.

Semenikhin, A. S.↗

A combinatorial droplet microfluidic device integrated with mass spectrometry for enzyme screening

Mass spectrometry (MS) enables detection of different chemical species with a very high specificity; however, it can be limited by its throughput. Integrating MS with microfluidics has a tremendous potential to improve throughput and accelerate biochemical research. In this work, we introduce Drop-NIMS, a combination of a passive droplet loading microfluidic device and a matrix-free MS laser desorption ionization technique called nanostructure-initiator mass spectrometry (NIMS). This platform combines different droplets at random to generate a combinatorial library of enzymatic reactions that are deposited directly on the NIMS surface without requiring additional sample handling. The enzyme reaction products are then detected with MS. Drop-NIMS was used to rapidly screen enzymatic reactions containing low (on the order of nL) volumes of glycoside reactants and glycoside hydrolase enzymes per reaction. MS “barcodes” (small compounds with unique masses) were added to the droplets to identify different combinations of substrates and enzymes created by the device. We assigned xylanase activities to several putative glycoside hydrolases, making them relevant to food and biofuel industrial applications. Overall, Drop-NIMS is simple to fabricate, assemble, and operate and it has potential to be used with many other small molecule metabolites.

47 OTHER INSTRUMENTATION↗