Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cloud Implementation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Multistatic Aerosol Cloud Lidar in Space: A Theoretical Perspective

Accurate aerosol and cloud retrievals from space remain quite challenging and typically involve solving a severely ill-posed inverse scattering problem. In this Perspective, we formulate in general terms an aerosol and aerosol-cloud interaction space mission concept intended to provide detailed horizontal and vertical profiles of aerosol physical characteristics as well as identify mutually induced changes in the properties of aerosols and clouds. We argue that a natural and feasible way of addressing the ill-posedness of the inverse scattering problem while having an exquisite vertical-profiling capability is to fly a multistatic (including bistatic) lidar system. We analyze theoretically the capabilities of a formation-flying constellation of a primary satellite equipped with a conventional monostatic (backscattering) lidar and one or more additional platforms each hosting a receiver of the scattered laser light. If successfully implemented, this concept would combine the measurement capabilities of a passive multi-angle multi-spectral polarimeter with the vertical profiling capability of a lidar; address the ill-posedness of the inverse problem caused by the highly limited information content of monostatic lidar measurements; address the ill-posedness of the inverse problem caused by vertical integration and surface reflection in passive photopolarimetric measurements; relax polarization accuracy requirements; eliminate the need for exquisite radiative-transfer modeling of the atmosphere-surface system in data analyses; yield the day-and-night observation capability; provide direct characterization of ground-level aerosols as atmospheric pollutants; and yield direct measurements of polarized bidirectional surface reflectance. We demonstrate, in particular, that supplementing the conventional backscattering lidar with just one additional receiver flown in formation at a scattering angle close to 170deg can dramatically increase the information content of the measurements. Although the specific subject of this Perspective is the multistatic lidar concept, all our conclusions equally apply to a multistatic radar system intended to study from space the global distribution of cloud and precipitation characteristics.

aerosols↗
DOE OSTI2022

Incorporating the effects of objects in an approximate model of light transport in scattering media

A computationally efficient radiative transport model is presented that predicts a camera measurement and accounts for the light reflected and blocked by an object in a scattering medium. The model is in good agreement with experimental data acquired at the Sandia National Laboratory Fog Chamber Facility (SNLFC). The model is applicable in computational imaging to detect, localize, and image objects hidden in scattering media. Here, a statistical approach was implemented to study object detection limits in fog.

42 ENGINEERING↗
DOE OSTI2014

Quantifying the uncertainties of aerosol indirect effects and impacts on decadal-scale climate variability in NCAR CAM5 and CESM1

The main goal of this project is to systematically quantify the major uncertainties of aerosol indirect effects due to the treatment of moist turbulent processes that drive aerosol activation, cloud macrophysics and microphysics in response to anthropogenic aerosol perturbations using the CAM5/CESM1. To achieve this goal, the P.I. hired a postdoctoral research scientist (Dr. Anna Fitch) who started her work from the Nov.1st.2012. In order to achieve the project goal, the first task that the Postdoc. and the P.I. did was to quantify the role of subgrid vertical velocity variance on the activation and nucleation of cloud liquid droplets and ice crystals and its impact on the aerosol indirect effect in CAM5. First, we analyzed various LES cases (from dry stable to cloud-topped PBL) to check whether this isotropic turbulence assumption used in CAM5 is really valid. It turned out that this isotropic turbulence assumption is not universally valid. Consequently, from the analysis of LES, we derived an empirical formulation relaxing the isotropic turbulence assumption used for the CAM5 aerosol activation and ice nucleation, and implemented the empirical formulation into CAM5/CESM1, and tested in the single-column and global simulation modes, and examined how it changed aerosol indirect effects in the CAM5/CESM1. These results were reported in the poster section in the 18th Annual CESM workshop held in Breckenridge, CO during Jun.17-20.2013. While we derived an empirical formulation from the analysis of couple of LES from the first task, the general applicability of that empirical formulation was questionable, because it was obtained from the limited number of LES simulations. The second task we did was to derive a more fundamental analytical formulation relating vertical velocity variance to TKE using other information starting from basic physical principles. This was a somewhat challenging subject, but if this could be done in a successful way, it could be directly implemented into the CAM5 as a practical parameterization, and substantially contributes to achieving the project goal. Through an intensive research for about one year, we found appropriate mathematical formulation and tried to implement it into the CAM5 PBL and activation routine as a practical parameterized numerical code. During these processes, however, the Postdoc applied for another position in Sweden, Europe, and accepted a job offer there, and left NCAR in August 2014. In Sweden, Dr. Anna Fitch is still working on this subject in a part time, planning to finalize the research and to write the paper in a near future.

58 GEOSCIENCES↗
DOE OSTI2023

Working with Multiple MPIs: Overcoming ABI Incompatibility

Scientific applications rely on third-party libraries, which may have multiple implementations. While sharing an application programming interface (API), many of these implementations do not have a shared application binary interface (ABI) and require recompiling. Recompiling can be a long and complex process and sometimes not even an option when the application is shipped binary only. ABI incompatibility strikes at the heart of portability, productivity, and performance by (1) impeding application execution across different HPC and Cloud systems; (2) adding developer hours rebuilding an application; and (3) not taking advantage of host-optimized libraries. This tutorial teaches attendees a portable way to address ABI incompatibility in MPI using the Wi4MPI library. Wi4MPI translates the ABI dynamically from the MPI library used to build the application to a different MPI library available at run time. With Wi4MPI, HPC practitioners can break the portability barrier imposed by ABI incompatibility, potentially increase performance, and increase user productivity. The tutorial is broken down in three components: (1) Understanding ABI compatibility in MPI; (2) Translating MPI libraries dynamically; and (3) Applying dynamic translation to key use cases in HPC, including Containers. If you use more than one MPI library or supercomputer, this tutorial is for you.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1976

A synthetic aperture processor using CCD signal processing techniques

Synthetic aperture radar (SAR) imaging was the most suitable technique for achieving high resolution imagery through atmospheric cloud cover. This feature was important for planetary as well as earth orbiting satellite systems, and for military aircraft applications. Such applications require onboard data processing or wide-band data transmission systems in order to handle the large amounts of raw data produced by such systems. A number of techniques were utilized in implementing SAR processors. Frequency filtering and Fourier transform operations using both optical and digital techniques were utilized in SAR processing.

Bailey, W. H.↗
NASA NTRSDate not supplied

Development of the GeoNEX Level 2G Products: Exploiting the Diurnal Variability of TOA Reflectance in Atmospheric Correction

This study develops a new atmospheric correction algorithm to generate the Level 2G products, in particular the gap-filled Surface Reflectance at 10-minute time steps, for the Geostationary-NASA Earth Exchange (GeoNEX) project. The algorithm is based on the MODIS MAIAC (Multi-Angle Implementation of Atmospheric Correction) framework but with significant modifications to exploit angular/temporal information from the diurnal variability of the GeoNEX L1G TOA (Top-of-Atmosphere) reflectance. The algorithm starts by evaluating the roughness/smoothness of the diurnal time series of the TOA reflectance. Because rapid changes in TOA reflectance are generally caused by passing clouds or shadows, rough segments of the time series are automatically filtered out while the smooth segments are further tested for brightness and temperature to identify clear-sky and snow-free observations. Next the algorithm runs the MAIAC RTM (Radiative Transfer Model) to retrieve the Ross-Thick-Li-Sparse (RTLS) BRDF model parameters and the daily-mean atmospheric optical depth (AOD) that allow the RTM to optimally simulate the observed diurnal variability of clear-sky TOA reflectance. Once the initial RTLS parameters are retrieved after the algorithm’s burn-in period, they are used as the prior information to predict the AOD level for the next days, while the subsequent clear-sky observations are used to make necessary adjustments to the RTLS parameters in an continuous fashion. This “prediction-analysis” cycle is then iterated to process the full time series of the L1G data, skipping only total-cloudy days or when surface snow is detected. We tested the algorithm over a list of selected AERONET sites. The retrieved results (the daily mean AOD and the RTLS parameters) reasonably agree with the ground-based measurements. Importantly, the results indicate that the diurnal cycles of surface reflectance are continuous functions of the illumination-view geometry. Thus we can use the retrieved RTLS model to accurately fill in data gaps on partial cloudy days. Also, our algorithm is totally independent from the traditional approaches based on the use of spectral band ratios between the shortwave infrared (e.g., 2.2µm) and the visible (e.g., 0.47µm and 0.64µm) bands. Our results thus demonstrate that the high-frequent diurnal geostationary observations contain unique information that helps us improve atmospheric correction of remote sensing data.

GeoNEX↗
NASA NTRSDate not supplied

Lessons learned from replicating services for flood prediction and monitoring in Asia to the assessment of hurricane impacts in Central America

In October and November 2020, two dangerous back-to-back hurricanes, Eta and Iota, made landfall in Central America. The SERVIR program - a joint effort of NASA and the U.S. Agency for International Development, and whose motto is “connecting space to village” was able to leverage two tools originally developed for use in other regions for predicting and assessing the flood impacts of the hurricanes. The GEOGLoWS Streamflow Prediction tool - originally implemented in the Hindu Kush Himalayan region - was used for predicting potential flooding ahead of landfall by Eta and Iota. In conjunction, the Hydrologic Remote Sensing Analysis for Floods (HYDRAFloods) framework - originally developed along with SERVIR-Mekong - was used for post-event flood mapping, leveraging its ability to map floods in cloud-covered areas using synthetic aperture radar (SAR) imagery from the Copernicus program. Both tools were used in support of disaster coordination efforts being led by the Central American Regional Disaster Prevention Center (CEPREDENAC), in conjunction with its sister agency, the Regional Water Resources Committee (CRRH). The support provided to regional entities - and to their stakeholder national governments - served as an example of rapid generation of Earth observation products for disaster response. Feedback on those products was also provided, especially in terms of the implications of (i) calibration of predicted river volumes, and (ii) the latency of the input Earth observation imagery and attempts to map the floods’ maximum extents. An upcoming NASA DEVELOP project will also seek to strengthen the capability of CEPREDENAC and CRRH to apply HYDRAFloods for future extreme events. The application of the tools also provides a useful case study on capacity building, in terms of how Earth observation data and models can be replicated across regions.

Capacity building↗
DOE OSTI2018

Industrial Scale Demonstration of Smart Manufacturing, Achieving Transformational Energy Productivity Gains

While many U.S. manufacturing operations utilize optimization for individual unit processes, smart manufacturing (SM) systems that integrate manufacturing intelligence in real time across an entire production operation are rare in large companies and virtually nonexistent in smaller organizations. One example of an area where SM systems can be applied is in the management of waste heat. A smart system that not only seeks to recover waste heat, but also to use energy more efficiently, is a more cost-effective approach because energy use, waste energy loss and product output are optimized together. The overall objective of this project was to develop an industry-accepted SM Platform that enables smart systems by accelerating and lowering the cost of development and implementation scales for use in diverse sets of manufacturing industry sectors, manufacturing operations and company sizes. Specifically, the project (1) designed and demonstrated the application of a prototype SM Platform for two diverse commercial test beds, (2) demonstrated at one and estimated for the other test bed the potential reduction in waste heat generation, and (3) worked with leading automation vendors to catalyze low-cost commercialization of the technology developed. The Smart Manufacturing Application and Data Platform (SM Platform) developed during this project is an innovative approach that marries IT virtualization technologies with operational data and modeling system requirements to construct a ready-to-go platform for enabling sensor – data – modeling – actuation systems, driven by real-time plant data and performance metrics. This SM Platform allows manufacturing organizations, regardless of their industry or size, to assemble new operational systems at a much lower cost, optimizing process knowledge and improving energy productivity by integrating with existing process control and automation systems. Also developed during this project is a methodology for developing energy productivity metrics that use real-time process information and provide comparisons for potential, practical, and actual performance, as well as examples and the methodology for provisioning of an Energy Dashboard that displays alternatives to optimize energy use within specific business contexts aimed at helping improve energy productivity and reduce emissions in U.S. manufacturing. The SM Platform designed utilizes current manufacturing, operational and IT industry standards. The platform can be used to expedite sensor – data – model – actuation system development and deployment in a cloud-based environment using a novel end-to-end workflow as a service capability that is already integrated with data connection, ingestion, and contextualization services. In addition, the methodology for development of energy productivity metrics and reusable application templates called Toolkits have been defined so that they can be tailored to a specific business situation. The project’s two test beds, one in a hydrogen production plant and the other in a forging, heat treatment, and machining operation, utilize sensor-driven modeling, measurement, and simulation systems. In these two test beds, the implementation of these as a comprehensive system has made it possible for energy productivity to be managed in real-time throughout the plant and enterprise using an energy dashboard. The development pathway to direct machine actuation was articulated. During the first year, the project team developed the most highly instrumented steam-methane reformer (SMR) in the U.S. using infrared cameras and thermocouples. Real-time data are streamed to high fidelity and reduced-order models for analysis. A high fidelity CFD model, parallelized in the SM Platform cloud environment, was demonstrated for operational use. This is the first real-time operational productivity system of a steam methane reformer using both high fidelity and data-driven models together in a real time situation to balance natural gas flow to the reformer tubes. An infrared camera system was developed and shown to outperform thermocouples in coverage, accuracy, reliability, and cost effectiveness for use in a high temperature, harsh environment. A forging, heat-treating, machining line operation test bed includes new instrumentation for data capture analysis, modeling, and simulation and will be integrated into SM Platform workflows so that business performance can be managed in real-time. Composable metrics were developed using the SM Platform to drive improvements in energy productivity, environmental performance, safety, asset management, costs, and overall operations. A major focus of the SM systems developed was optimization of energy productivity at the enterprise level, which resulted in reductions in waste heat generation for the two project test beds. Reductions in the waste heat generated will result in greater energy savings than will waste heat recovery due to inefficiencies in the heat transfer process. For the SMR test bed an efficiency improvement of 1 – 2% with a corresponding waste heat reduction of 5% were demonstrated. It should be noted that the test bed SMR unit had an efficiency of more than 90% as compared to 70 to 80% efficiencies of most SMR units. So implementation of similar SM systems at typical SMR units could yield more than 15 to 25% waste heat reductions. Similarly the forging, heat-treating, machining line operation test bed is a DOE AMO Platinum Level Superior Energy Performance plant with a much higher than typical overall operating efficiency. For this test bed heat integration using recuperators is estimated to result in fuel savings of 15.9% due to waste heat recovery compared to the base case without recuperators with negligible changes in part exit conditions. This results in an 18.9% energy efficiency improvement. The project team estimates that broad multi-sector adoption of the developed technology could reduce waste heat generation by an amount equivalent to 1.3% of total U.S. energy use. This waste heat reduction is associated with 69 million tons reduction in annual carbon dioxide emissions. Other potential benefits include reducing process times, solid and liquid wastes, environmental impacts, and water use. It is estimated that this investment has an anticipated payback period of less than one year in energy-intensive applications. The SM Platform could also reduce the costs of deploying SM systems by 50% in manufacturing operations. Commercialization of the SM Platform will require significant cross-industry collaboration and technology provider market changes. Steps taken toward commercialization included 1) analyzing savings from deployment of the SM Platform and 2) holding SM Platform workshops, webinars, and conferences with targeted individual industry segments, with a focus on small and medium-sized organizations. An upgraded community website has been established as a portal for accessing and distributing information. Most importantly, the SM platform enabling technology developed during this project and its commercialization will continue, evolve and expand under the Clean Energy Smart Manufacturing Innovation Institute (CESMII).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

SpaRC: scalable sequence clustering using Apache Spark

MOTIVATION: Whole genome shotgun based next-generation transcriptomics and metagenomics studies often generate 100-1000 GB sequence data derived from tens of thousands of different genes or microbial species. Assembly of these data sets requires tradeoffs between scalability and accuracy. Current assembly methods optimized for scalability often sacrifice accuracy and vice versa. An ideal solution would both scale and produce optimal accuracy for individual genes or genomes. RESULTS: In this work we describe an Apache Spark-based scalable sequence clustering application, SparkReadClust (SpaRC), that partitions reads based on their molecule of origin to enable downstream assembly optimization. SpaRC produces high clustering performance on transcriptomes and metagenomes from both short and long read sequencing technologies. It reaches near-linear scalability with input data size and number of compute nodes. SpaRC can run on both cloud computing and HPC environments without modification while delivering similar performance. Our findings demonstrate that SpaRC provides a scalable solution for clustering billions of reads from next-generation sequencing experiments, and Apache Spark represents a cost-effective solution with rapid development/deployment cycles for similar large-scale sequence data analysis problems. AVAILABILITY AND IMPLEMENTATION: https://bitbucket.org/berkeleylab/jgi-sparc.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2001

HALOE Algorithm Improvements for Upper Tropospheric Sounding

This report details the ongoing efforts by GATS, Inc., in conjunction with Hampton University and University of Wyoming, in NASA's Mission to Planet Earth Upper Atmospheric Research Satellite (UARS) Science Investigator Program entitled 'HALOE Algorithm Improvements for Upper Tropospheric Sounding.' The goal of this effort is to develop and implement major inversion and processing improvements that will extend Halogen Occultation Experiment (HALOE) measurements further into the troposphere. In particular, O3, H2O, and CH4 retrievals may be extended into the middle troposphere, and NO, HCl and possibly HF into the upper troposphere. Key areas of research being carried out to accomplish this include: pointing/tracking analysis; cloud identification and modeling; simultaneous multichannel retrieval capability; forward model improvements; high vertical-resolution gas filter channel retrievals; a refined temperature retrieval; robust error analyses; long-term trend reliability studies; and data validation. The current (first year) effort concentrates on the pointer/tracker correction algorithms, cloud filtering and validation, and multichannel retrieval development. However, these areas are all highly coupled, so progress in one area benefits from and sometimes depends on work in others.

Thompson, Robert Earl↗
NASA NTRSDate not supplied

Improving “Domain-Relevant Metadata Requirements” for Supporting Open-Source Science Initiative

Implementation of the NASA Open-Source Science Initiative (OSSI) requires sharing of all relevant information to ensure “open reproducible science” [1]. However, there are several challenges in applying the OSSI to airborne field campaigns focused on atmospheric composition, which often involve a wide variety of in-situ measurements for trace gases, aerosol and cloud properties, meteorological parameters, and radiation fields. To ensure open reproducibility from airborne field campaigns, it is essential to obtain detailed measurement descriptions, which include the detection principle, sample procedure and treatment, and data processing and correction method. The challenge is that some information, e.g., sampling procedure and treatment, may be instrument-specific and campaign or platform-dependent. The data processing may also involve empirical corrections which may evolve over time. In addition, these details (especially operation- or campaign-specific ones) are often not given in journal publications. Given these issues, there is a need to leverage and improve the current “domain-relevant metadata requirements” to represent the measurement description in standardized metadata. These requirements can then facilitate systematic collection of measurement specific metadata and serve as a foundation to develop tools for making the information accessible and data more interoperable and usable or reusable. Here we show a review of existing metadata collections, use cases, and needs for new standards.

Sean Leavor↗
DOE OSTI2022

A scalable, open-source implementation of a large-scale mechanistic model for single cell proliferation and death signaling

Mechanistic models of how single cells respond to different perturbations can help integrate disparate big data sets or predict response to varied drug combinations. However, the construction and simulation of such models have proved challenging. Here, we developed a python-based model creation and simulation pipeline that converts a few structured text files into an SBML standard and is high-performance- and cloud-computing ready. We applied this pipeline to our large-scale, mechanistic pan-cancer signaling model (named SPARCED) and demonstrate it by adding an IFNγ pathway submodel. We then investigated whether a putative crosstalk mechanism could be consistent with experimental observations from the LINCS MCF10A Data Cube that IFNγ acts as an anti-proliferative factor. The analyses suggested this observation can be explained by IFNγ-induced SOCS1 sequestering activated EGF receptors. This work forms a foundational recipe for increased mechanistic model-based data integration on a single-cell level, an important building block for clinically-predictive mechanistic models.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Experience with dynamic resource provisioning of the CMS online cluster using a cloud overlay

The primary goal of the online cluster of the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC) is to build event data from the detector and to select interesting collisions in the High Level Trigger (HLT) farm for offline storage. With more than 1500 nodes and a capacity of about 850 kHEPSpecInt06, the HLT machines represent similar computing capacity of all the CMS Tier1 Grid sites together. Moreover, it is currently connected to the CERN IT datacenter via a dedicated 160 Gbps network connection and hence can access the remote EOS based storage with a high bandwidth. In the last few years, a cloud overlay based on OpenStack has been commissioned to use these resources for the WLCG when they are not needed for data taking. This online cloud facility was designed for parasitic use of the HLT, which must never interfere with its primary function as part of the DAQ system. It also allows to abstract from the different types of machines and their underlying segmented networks. During the LHC technical stop periods, the HLT cloud is set to its static mode of operation where it acts like other grid facilities. The online cloud was also extended to make dynamic use of resources during periods between LHC fills. These periods are a-priori unscheduled and of undetermined length, typically of several hours, once or more a day. For that, it dynamically follows LHC beam states and hibernates Virtual Machines (VM) accordingly. Finally, this work presents the design and implementation of a mechanism to dynamically ramp up VMs when the DAQ load on the HLT reduces towards the end of the fill.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1987

Spectral radiometry and tropospheric aerosols: Report of panel

The term aerosols, as used here, refers to the haze, smoke, and dust that appear in the troposphere. The term does not refer to the hydrometeors in cumulus and stratus clouds but does include the sulfuric acid-water droplets which are assumed to predominate in the stratospheric aerosol layer. The aerosol properties that were measured from satellites and those which can be made in the near term (up to 1992) will be reviewed. The capabilities that will exist in the years 1992 to 2000, with implementation of EOS, are then discussed. Finally, a few words will be said concerning the potential for aerosol measurements for the decade after 2000.

Fraser, Robert S.↗
NASA NTRS2012

Constraints on the Profiles of Total Water PDF in AGCMs from AIRS and a High-Resolution Model

Atmospheric general circulation model (AGCM) cloud parameterizations generally include an assumption about the subgrid-scale probability distribution function (PDF) of total water and its vertical profile. In the present study, the Atmospheric Infrared Sounder (AIRS) monthly-mean cloud amount and relative humidity fields are used to compute a proxy for the second moment of an AGCM total water PDF called the RH01 diagnostic, which is the AIRS mean relative humidity for cloud fractions of 0.1 or less. The dependence of the second moment on horizontal grid resolution is analyzed using results from a high-resolution global model simulation.The AIRS-derived RH01 diagnostic is generally larger near the surface than aloft, indicating a narrower PDF near the surface, and varies with the type of underlying surface. High-resolution model results show that the vertical structure of profiles of the AGCM PDF second moment is unchanged as the grid resolution changes from 200 to 100 to 50 km, and that the second-moment profiles shift toward higher values with decreasing grid spacing.Several Goddard Earth Observing System, version 5 (GEOS-5), AGCM simulations were performed with several choices for the profile of the PDF second moment. The resulting cloud and relative humidity fields were shown to be quite sensitive to the prescribed profile, and the use of a profile based on the AIRS-derived proxy results in improvements relative to observational estimates. The AIRS-guided total water PDF profiles, including their dependence on underlying surface type and on horizontal resolution, have been implemented in the version of the GEOS-5 AGCM used for publicly released simulations.

Molod, Andrea↗
DOE OSTI2025

Urban weather modeling using WRF: linking physical assumptions, code implementation, and observational needs

The Weather Research and Forecasting (WRF) model includes urban schemes that simulate the influence of urban surfaces on the atmosphere using parameterizations for flux, and radiative exchanges. Three core schemes – the Bulk urban parameterization, Single-Layer Urban Canopy Model (SLUCM), and Multi-Layer Urban Canopy Model (MLUCM) – represent increasing levels of complexity. Although the parameterizations within these urban schemes are described in the literature, their specific implementation remains poorly documented, thus slowing down model development efforts. This manuscript provides a roadmap to the three urban schemes in WRF version 4.5.2, presenting equations using the same symbols as in the model code, along with references to code lines, and including graphics and explanations that connect the code to its physical foundations. Our thorough review of the urban parameterizations implemented in WRF version 4.5.2 highlighted a handful of parameters that may introduce discontinuities in simulations: (i) in the SLUCM, a 1 mm h −1 rain rate threshold is employed to switch between two minimum moisture availability parameterizations, thus impacting latent heat flux calculations; (ii) in the SLUCM a threshold is used to partition shortwave radiation into direct and diffuse components; (iii) in all three urban schemes, the bulk Richardson number is employed to select the similarity function, which influences the vertical distribution of heat and momentum. We also identified a highly simplified treatment of the radiative balance on roof surfaces. The implications of these simplifications can be assessed through targeted observations across relevant conditions, including varying precipitation rates, cloud cover, and transitions between stability regimes. Furthermore, the widespread application of the Monin-Obukhov similarity theory in these urban schemes warrants model evaluation under highly stable and unstable conditions and in heterogeneous urban settings with variable land cover and building heights on scales finer than model resolution. To address these challenges, we offer guidance on observational strategies, emphasizing the need for multi-parametric measurements to capture potential compensating biases and multi-height measurements that align with the levels where quantities are diagnostic and prognosed in the model (i.e., the lowest atmospheric level of the WRF model). Finally, our inspection of the code revealed implementation bugs that have now been corrected in WRF versions 4.6.0 and 4.6.1. Sensitivity tests over the Atlanta urban area show that these corrections affect surface temperatures, underscoring the importance of performing rigorous documentation and verification of the implementation of parameterizations in model code.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2016

WRF-Chem Simulations of Lightning-NOx Production and Transport in Oklahoma and Colorado Thunderstorms Observed During DC3

The focus of this analysis is on lightning-generated nitrogen oxides (LNOx) and their distribution for two thunderstorms observed during the Deep Convective Clouds and Chemistry (DC3) field campaign in May-June 2012. The Weather Research and Forecasting Chemistry (WRF-Chem) model is used to perform cloud-resolved simulations for the May 29-30 Oklahoma severe convection, which contained one supercell, and the June 6-7 Colorado squall line. Aircraft and ground-based observations (e.g., trace gases, lightning and radar) collected during DC3 are used in comparisons against the model-simulated lightning flashes generated by the flash rate parameterization schemes (FRPSs) incorporated into the model, as well as the model-simulated LNOx predicted in the anvil outflow. Newly generated FRPSs based on DC3 radar observations and Lightning Mapping Array data are implemented in the model, along with previously developed schemes from the literature. The results of these analyses will also be compared between storms to investigate which FRPSs were most appropriate for the two types of convection and to examine the variation in the LNOx production. The simulated LNOx results from WRF-Chem will also be compared against other previously studied mid-latitude thunderstorms.

Lightning↗
DOE OSTI2024

Cybersecurity Considerations for Emerging Energy Technologies

AI, cloud computing, post-quantum cryptography, zero-trust architectures, microgrids, and virtual power plants. What do these things have in common? They are all emerging technologies in the clean energy space that will be a critical part of grid modernization efforts. As we work towards clean energy and decarbonization targets, these technologies, developed to solve real-world problems, will help us reach goals and achieve new efficiencies as the paradigm of grid operation shifts. However, there are growing concerns about the cybersecurity risks associated with these trending topics as they are used in critical infrastructure applications. This talk will cover gaps, challenges, and opportunities for the secure implementation of grid modernization solutions and novel energy applications of state-of-the-art networking and communications. Proactive risk mitigation strategies, including the application of cyber-informed engineering, will be discussed. Practical applications of these techniques will help provide countermeasures to the impact of cyberattacks on critical infrastructure technologies in a new, digitized grid landscape.

14 SOLAR ENERGY↗