Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bioenergy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Synergistic torrefaction of plastic polymers and biomass

This study explores the synergistic torrefaction of biomass and plastics, aimed at enhancing bioenergy production and promoting a circular economy. By leveraging the unique properties of both materials, we investigated the thermochemical transformations occurring during the torrefaction process, from material preparation to the final characteristics of the torrefied product. The biomass used included corn stover (CS) and loblolly pine (LP), while various plastics were categorized from #1 to #7. Torrefaction was conducted at temperatures of 200, 225, and 250 °C, with subsequent extrusion of the torrefied materials and raw materials to produce composite filaments. The results show a consistent decrease in mass yield with increased torrefaction temperature, with notable variations among different biomass-plastic combinations. Co-torrefaction of biomass with polyvinyl chloride and polypropylene resulted in accelerated reaction kinetics, with an observed mass loss rate increase of 15 % at 250 °C compared to the expected rates for individual components. This synergy was quantified, indicating a 20.3 % increase in mass loss for the loblolly pine-polypropylene combination and 23.9 % for corn stover-polypropylene. In contrast, other plastics, including polyethylene terephthalate, high-density polyethylene, low-density polyethylene, polystyrene, and polycarbonate, did not exhibit significant synergistic effects. Mechanical testing indicated that the torrefaction process alters the strength and brittleness of the resulting materials, with implications for their application in bioenergy production and bio-renewable materials. Overall, this research highlights the potential of synergistic torrefaction as a viable strategy for co-processing biomass and plastics, paving the way for innovative solutions in waste management and renewable energy resource development.

09 - BIOMASS FUELS↗

Economic Analysis of Wet Waste-to-Energy Resources in the United States

Waste-to-energy (WTE) technologies provide opportunities to use waste materials beneficially in producing power, transportation fuels, and chemicals. Using a suite of economic models, this study estimates prices of four WTE resources: food waste; fats, oils, and greases (FOG); animal manure; and sewage sludge. Some of these materials are commoditized (e.g. FOG) thus their price is determined by market demand. For the materials regarded as waste, the study relates price to the avoided cost of disposal through waste management alternatives such as landfilling. This study finds that significant amounts of these feedstocks could be available at negative prices, meaning that a potential bioenergy facility could receive these materials for free or be paid to accept them in some locations. It is estimated that about 61% of sewage sludge, 27% of manure, and 7% of food waste may be available at negative prices. These negative price feedstocks are not uniformly distributed and are most likely to occur in areas with organic waste disposal bans, high population densities, and high landfill tipping fees. This study intends to open an initial discussion into how stakeholders view and value these materials, and how this view is evolving as their potential as WTE feedstocks is realized.

09 BIOMASS FUELS↗

Airborne hyperspectral imaging of nitrogen deficiency on crop traits and yield of maize by machine learning and radiative transfer modeling

Nitrogen is an essential nutrient that directly affects plant photosynthesis, crop yield, and biomass production for bioenergy crops, but excessive application of nitrogen fertilizers can cause environmental degradation. To achieve sustainable nitrogen fertilizer management for precision agriculture, there is an urgent need for nondestructive and high spatial resolution monitoring of crop nitrogen and its allocation to photosynthetic proteins as that changes over time. Here, we used visible to shortwave infrared (400–2400 nm) airborne hyperspectral imaging with high spatial (0.5 m) and spectral (3–5 nm) resolutions to accurately estimate critical crop traits, i.e., nitrogen, chlorophyll, and photosynthetic capacity (CO 2 -saturated photosynthesis rate, V max,27 ), at leaf and canopy scales, and to assess nitrogen deficiency on crop yield. We conducted three airborne campaigns over a maize (Zea mays L.) field during the growing season of 2019. Physically based soil-canopy Radiative Transfer Modeling (RTM) and data-driven approaches i.e. Partial-Least Squares Regression (PLSR) were used to retrieve crop traits from hyperspectral reflectance, with ground truth of leaf nitrogen, chlorophyll, V max,27 , Leaf Area Index (LAI), and harvested grain yield. To improve computational efficiency of RTMs, Random Forest (RF) was used to mimic RTM simulations to generate machine learning surrogate models RTM-RF. The results show that prior knowledge of soil background and leaf angle distribution can significantly reduce the ill-posed RTM retrieval. RTM-RF achieved a high accuracy to predict leaf chlorophyll content (R 2 = 0.73) and LAI (R 2 = 0.75). Meanwhile, PLSR exhibited better accuracy to predict leaf chlorophyll content (R 2 = 0.79), nitrogen concentration (R 2 = 0.83), nitrogen content (R 2 = 0.77), and V max,27 (R 2 = 0.69) but required measured traits for model training. We also found that canopy structure signals can enhance the use of spectral data to predict nitrogen related photosynthetic traits, as combining RTM-RF LAI and PLSR leaf traits well predicted canopy-level traits (leaf traits × LAI) including canopy chlorophyll (R 2 = 0.80), nitrogen (R 2 = 0.85) and V max,27 (R 2 = 0.82). Compared to leaf traits, we further found that canopy-level photosynthetic traits, particularly canopy V max,27 , have higher correlation with maize grain yield. This study highlights the potential for synergistic use of process-based and data-driven approaches of hyperspectral imaging to quantify crop traits that facilitate precision agricultural management to secure food and bioenergy production.

54 ENVIRONMENTAL SCIENCES↗

Life-cycle impact and exergy based resource use assessment of torrefied and non-torrefied briquette use for heat and electricity generation

Forest residue biomass can be used as bioenergy feedstock, however, issues associated with its properties including low density and high moisture content constrains its valorization. Using mobile conversion technologies that can operate in remote areas and are capable of converting forest residues into high quality energy products can address the issues associated with its valorization for renewable energy production. This study evaluated environmental sustainability of using an integrated novel system of semi-mobile biomass conversion technologies (BCTs) to utilize low-value forest residue biomass as high value bioenergy products. A cradle-to-grave life cycle assessment (LCA) and resource use assessment on a unit-process level was conducted for two bio-products: nontorrefied briquettes (NTB) and torrefied briquettes (TOB). Their use for production of useful thermal energy in wood stoves for domestic heating and electricity at power plants were investigated along with their alternatives. The analyses were performed with SimaPro 8.5 using the DATASMART database. The impact assessment results showed a notable decrease in global warming (GW) impact when substituting fossil fuels with these two bio-products. Specifically, for domestic heating on an equivalent energy basis, a 50% substitution of propane with NTB and TOB showed GHG emission reductions of 46% and 41%, respectively. For electricity generation, 10% cofiring at coal power plant with NTB and TOB showed GHG emission reductions of 6% and 8%, respectively. For the TOB supply chain, a large portion of the GW impact of the came from the torrefaction process and followed by the drying process. This was due to the propane use in these processes. Comparative analysis showed that near-woods biomass conversion for TOB production instead of processing feedstock at an in-town facility with access to grid electricity found 48%–55% lower GW impact for both electricity and heat generation scenarios, respectively. Resourced footprint analysis showed that most exergy extraction from the natural environment came from the drying process for NTB supply chain. In the TOB product system, torrefaction was the major contributor.

09 BIOMASS FUELS↗

Evaluating the incentive for soil organic carbon sequestration from carinata production in the Southeast United States

Soil organic carbon (SOC) can be increased by cultivating bioenergy crops to produce low-carbon fuels, improving soil quality and agricultural productivity. This study evaluates the incentives for farmers to sequester SOC by adopting a bioenergy crop, carinata. Two agricultural management scenarios – business as usual (BaU) and a climate-smart (no-till) practice – were simulated using an agent-based modeling approach to account for farmers’ carinata adoption rates within their context of traditional crop rotations, the associated profitability, influences of neighboring farmers, as well as their individual attitudes. Here, using the state of Georgia, US, as a case study, the results show that farmers allocated 1056 × 10 3 acres (23.8%; 2.47 acres is equivalent to 1 ha) of farmlands by 2050 at a contract price of $\$6.5$ per bushel of carinata seeds and with an incentive of $50Mg -1 CO2e SOC sequestered under the BaU scenario. In contrast, at the same contract price and SOC incentive rate, farmers allocated 1152 × 10 3 acres (25.9%) of land under the no-till scenario, while the SOC sequestration was 483.83 × 10 3 Mg CO2e, which is nearly four times the amount under the BaU scenario. Thus, this study demonstrated combinations of seed prices and SOC incentives that encourage farmers to adopt carinata with climate-smart practices to attain higher SOC sequestration benefits.

54 ENVIRONMENTAL SCIENCES↗

Heterologous Expression of Glycosyl Hydrolases in planta: A New Departure for Biofuels

The concept of expressing non-plant glycosyl hydrolase genes in plant tissue is less than two decades old, and yet little work in this field has been reported. However, the resurgent interest in technologies aimed at enabling biomass to sugars/fuels processes have again pointed to this intuitive solution. Research challenges in this regard include developing better and more specifically targeted delivery systems for hydrolytic genes, achieving successful folding and post-translational modification of heterologous proteins, and developing cost effective process strategies utilizing these transformed plants. Integration of these concepts, from the improvement of biomass production and conversion characteristics to heterologous production of glycosyl hydrolases in a high yielding bioenergy crop, holds considerable promise for improving the lignocellulosic biomass to ethanol/fuels process.

09 BIOMASS FUELS↗

Approaches for More Efficient Biological Conversion of Lignocellulosic Feedstocks to Biofuels and Bioproducts

The future bioeconomy promises drop-in or performance-advantaged biofuels and bioproducts derived from lignocellulosic biomass, substantial greenhouse gas emissions reductions in sectors with few or no alternatives, and increased domestic energy production in countries with sufficient biomass resources. Despite the slower than anticipated pace of commercializing next-generation biofuels, the research community continues to make dramatic improvements at every stage of production, from feedstock cultivation through conversion to final products. However, the interdisciplinary nature of bioenergy research, and the need for cross-coordination among biologists, chemists, agronomists, and engineers, make coordinating and optimizing these strategies challenging. This Perspective surveys recent advancements in bioenergy crop engineering, lignocellulosic biomass deconstruction and fractionation, catabolism of biomass-derived sugars and aromatics, and biological conversion to fuels and products. Here, we organize major research approaches into broad categories and comment on which strategies offer synergies or trade-offs in the context of four approaches to improving the economics and carbon-efficiency of advanced biofuels and bioproducts: (1) maximize sugar conversion to a single product, (2) utilize diverse carbon sources for producing a single product, (3) convert lignin to high-value products, and (4) fractionate the hydrolysate to derive maximum value from each component.

09 BIOMASS FUELS↗

Network-based integration of systems genetics data reveals pathways associated with lignocellulosic biomass accumulation and processing

As a consequence of their remarkable adaptability, fast growth, and superior wood properties, eucalypt tree plantations have emerged as key renewable feedstocks (over 20 million ha globally) for the production of pulp, paper, bioenergy, and other lignocellulosic products. However, most biomass properties such as growth, wood density, and wood chemistry are complex traits that are hard to improve in long-lived perennials. Systems genetics, a process of harnessing multiple levels of component trait information (e.g., transcript, protein, and metabolite variation) in populations that vary in complex traits, has proven effective for dissecting the genetics and biology of such traits. We have applied a network-based data integration (NBDI) method for a systems-level analysis of genes, processes and pathways underlying biomass and bioenergy-related traits using a segregating Eucalyptus hybrid population. We show that the integrative approach can link biologically meaningful sets of genes to complex traits and at the same time reveal the molecular basis of trait variation. Gene sets identified for related woody biomass traits were found to share regulatory loci, cluster in network neighborhoods, and exhibit enrichment for molecular functions such as xylan metabolism and cell wall development. These findings offer a framework for identifying the molecular underpinnings of complex biomass and bioprocessing-related traits. Furthermore, a more thorough understanding of the molecular basis of plant biomass traits should provide additional opportunities for the establishment of a sustainable bio-based economy.

09 BIOMASS FUELS↗

Genotype, development and tissue-derived variation of cell-wall properties in the lignocellulosic energy crop Miscanthus

Species and hybrids of the genus Miscanthus contain attributes that make them front-runners among current selections of dedicated bioenergy crops. A key trait for plant biomass conversion to biofuels and biomaterials is cell-wall quality; however, knowledge of cell-wall composition and biology in Miscanthus species is limited. This study presents data on cell-wall compositional changes as a function of development and tissue type across selected genotypes, and considers implications for the development of miscanthus as a sustainable and renewable bioenergy feedstock. Cell-wall biomass was analysed for 25 genotypes, considering different developmental stages and stem vs. leaf compositional variability, by Fourier transform mid-infrared spectroscopy and lignin determination. In addition, a Clostridium phytofermentans bioassay was used to assess cell-wall digestibility and conversion to ethanol. Important cell-wall compositional differences between miscanthus stem and leaf samples were found to be predominantly associated with structural carbohydrates. Lignin content increased as plants matured and was higher in stem tissues. Although stem lignin concentration correlated inversely with ethanol production, no such correlation was observed for leaves. Leaf tissue contributed significantly to total above-ground biomass at all stages, although the extent of this contribution was genotype-dependent. In conclusion, it is hypothesized that divergent carbohydrate compositions and modifications in stem and leaf tissues are major determinants for observed differences in cell-wall quality. The findings indicate that improvement of lignocellulosic feedstocks should encompass tissue-dependent variation as it affects amenability to biological conversion. For gene-trait associations relating to cell-wall quality, the data support the separate examination of leaf and stem composition, as tissue-specific traits may be masked by considering only total above-ground biomass samples, and sample variability could be mostly due to varying tissue contributions to total biomass.

59 BASIC BIOLOGICAL SCIENCES↗

Unique contributions of chlorophyll and nitrogen to predict crop photosynthetic capacity from leaf spectroscopy

The photosynthetic capacity or the CO 2 -saturated photosynthetic rate (Vmax), chlorophyll, and nitrogen are closely linked leaf traits that determine C 4 crop photosynthesis and yield. Accurate, timely, rapid, and non-destructive approaches to predict leaf photosynthetic traits from hyperspectral reflectance are urgently needed for high-throughput crop monitoring to ensure food and bioenergy security. Therefore, this study thoroughly evaluated the state-of-the-art physically based radiative transfer models (RTMs), data-driven partial least squares regression (PLSR), and generalized PLSR (gPLSR) models to estimate leaf traits from leaf-clip hyperspectral reflectance, which was collected from maize (Zea mays L.) bioenergy plots with diverse genotypes, growth stages, treatments with nitrogen fertilizers, and ozone stresses in three growing seasons. The results show that leaf RTMs considering bidirectional effects can give accurate estimates of chlorophyll content (Pearson correlation r=0.95), while gPLSR enabled retrieval of leaf nitrogen concentration (r=0.85). Using PLSR with field measurements for training, the cross-validation indicates that V max can be well predicted from spectra (r=0.81). Here, the integration of chlorophyll content (strongly related to visible spectra) and nitrogen concentration (linked to shortwave infrared signals) can provide better predictions of V max (r=0.71) than only using either chlorophyll or nitrogen individually. This study highlights that leaf chlorophyll content and nitrogen concentration have key and unique contributions to V max prediction.

59 BASIC BIOLOGICAL SCIENCES↗

A single amino acid change led to structural and functional differentiation of PvHd1 to control flowering in switchgrass

Abstract Switchgrass, a forage and bioenergy crop, occurs as two main ecotypes with different but overlapping ranges of adaptation. The two ecotypes differ in a range of characteristics, including flowering time. Flowering time determines the duration of vegetative development and therefore biomass accumulation, a key trait in bioenergy crops. No causal variants for flowering time differences between switchgrass ecotypes have, as yet, been identified. In this study, we mapped a robust flowering time quantitative trait locus (QTL) on chromosome 4K in a biparental F2 population and characterized the flowering-associated transcription factor gene PvHd1, an ortholog of CONSTANS in Arabidopsis and Heading date 1 in rice, as the underlying causal gene. Protein modeling predicted that a serine to glycine substitution at position 35 (p.S35G) in B-Box domain 1 greatly altered the global structure of the PvHd1 protein. The predicted variation in protein compactness was supported in vitro by a 4 °C shift in denaturation temperature. Overexpressing the PvHd1-p.35S allele in a late-flowering CONSTANS-null Arabidopsis mutant rescued earlier flowering, whereas PvHd1-p.35G had a reduced ability to promote flowering, demonstrating that the structural variation led to functional divergence. Our findings provide us with a tool to manipulate the timing of floral transition in switchgrass cultivars and, potentially, expand their cultivation range.

59 BASIC BIOLOGICAL SCIENCES↗

Abiotic Stress Reorganizes Rhizosphere and Endosphere Network Structure of Sorghum bicolor

Sorghum bicolor is a promising bioenergy feedstock with high biomass production and unusual tolerance for stresses, such as water and nutrient limitation. Although the membership of the sorghum microbiome in response to stress has been explored, relatively little is known about how microbe–microbe networks change under water- or nutrient-limited conditions. This is important because network changes can indicate impacts on the functionality and stability of microbial communities. We performed network-based analysis on the core bacterial and archaeal community of an agronomically promising high biomass bioenergy genotype, Grassl, grown under nitrogen and water stress. Stress caused relatively minor changes in bacterial abundances within soil, rhizosphere, and endosphere communities but led to significant changes in bacterial network structure and modularity. We found a complete reorganization of network roles in all plant compartments, as well as an increase in the modularity and proportion of positive associations, which potentially could represent coexistence and cooperation in the sorghum bacterial/archaeal community under stress. Although stressors are often believed to be destabilizing, we found stressed networks were as or more stable than non-stressed networks, likely due to their redundancy and compartmentalization. Together, these findings support the idea that both sorghum and its bacterial/archaeal community can be resilient to future environmental stressors.

09 BIOMASS FUELS↗

The Switchgrass Microbiome: A Review of Structure, Function, and Taxonomic Distribution

Switchgrass (Panicum virgatum L.) has been championed as a promising bioenergy crop due to its high productivity across a wide environmental range. The switchgrass microbiome—including bacteria, archaea, fungi, and other microbiota inhabiting soil and plant tissues—can influence plant function substantially. We conducted a review of the literature investigating switchgrass microbiome structure, key functional roles, and taxa isolated from field-grown plants. Although site conditions and plant compartment (i.e., location within shoots, roots, or root-influenced soil) appear to be the strongest drivers of switchgrass microbiome structure, the microbiome is also shaped by climate, season, and host genotype. Studies comparing across plant species show that the switchgrass microbiome is more similar to the microbiomes of other perennial plants than to the microbiomes of annual plants. Members of the switchgrass microbiome confer several benefits to their host. Most notably, mycorrhizal fungi can increase plant biomass many-fold, associative nitrogen-fixing bacteria can provide a substantial portion of the plant’s nitrogen demand, and fungal endophytes can improve plant tolerance to drought. Although the fungi and bacteria cultured from switchgrass represent only a portion of the microbiome, these serve as a valuable resource for researchers interested in investigating functional outcomes of the switchgrass microbiome. We highlight areas where additional research is necessary for a more comprehensive understanding of switchgrass microbiome structure, function, and potential to enhance sustainable bioenergy production. Key gaps include the role of understudied organisms (e.g., viruses, microeukaryotes, and nonmycorrhizal fungi), multitrophic relationships, mechanisms underpinning switchgrass–microbiome interactions, and field-scale validation of experimental findings.

54 ENVIRONMENTAL SCIENCES↗

Switchgrass nitrogen response and estimated production costs on diverse sites

Switchgrass ( Panicum virgatum L.) has been the principal perennial herbaceous crop investigated for bioenergy production in North America given its high production potential, relatively low input requirements, and potential suitability for use on marginal lands. Few large trials have determined switchgrass yields at field scale on marginal lands, including analysis of production costs. Thus, a field–scale study was conducted to develop realistic yield and cost estimates for diverse regions of the USA. Objectives included measuring switchgrass response to fertility treatments (0, 56, and 112 kg N ha –1 ) and generating corresponding estimates of production costs for sites with diverse soil and climatic conditions. Trials occurred in Iowa, New York, Oklahoma, South Dakota, and Virginia, USA. Cultivars and management practices were site specific, and field–scale equipment was used for all management practices. Input costs were estimated using final harvest–year (2015) prices, and equipment operation costs were estimated with the MachData model (2015). Switchgrass yields generally were below those reported elsewhere, averaging 6.3 Mg ha –1 across sites and treatments. Establishment stand percent ranged from 28% to 76% and was linked to initial year production. No response to N was observed at any site in the first production year. In subsequent seasons, N generally increased yields on well–drained soils; however, responses to N were nil or negative on less well–drained soils. Greatest percent increases in response to 112 kg N ha –1 were 57% and 76% on well–drained South Dakota and Virginia sites, where breakeven prices to justify N applications were over 70 and 63 Mg –1 , respectively. For some sites, typically promoted N application rates may be economically unjustified; it remains unknown whether a bioenergy industry can support the breakeven prices estimated for sites where N inputs had positive effects on switchgrass yield.

09 BIOMASS FUELS↗

Key environmental and production factors for understanding variation in switchgrass chemical attributes

Abstract Switchgrass ( Panicum virgatum L.) is a promising feedstock for bioenergy and bioproducts; however, its inherent variability in chemical attributes creates challenges for uniform conversion efficiencies and product quality. It is necessary to understand the range of variation and factors (i.e., field management, environmental) influencing chemical attributes for process improvement and risk assessment. The objectives of this study were to (1) examine the impact of nitrogen fertilizer application rate, year, and location on switchgrass chemical attributes, (2) examine the relationships among chemical attributes, weather and soil data, and (3) develop models to predict chemical attributes using environmental factors. Switchgrass samples from a field study spanning four locations including upland cultivars, one location including a lowland cultivar, and between three and six harvest years were assessed for glucan, xylan, lignin, volatiles, carbon, nitrogen, and ash concentrations. Using variance estimation, location/cultivar, nitrogen application rate, and year explained 65%–96% of the variation for switchgrass chemical attributes. Location/cultivar × year interaction was a significant factor for all chemical attributes indicating environmental‐based influences. Nitrogen rate was less influential. Production variables and environmental conditions occurring during the switchgrass field trials were used to successfully predict chemical attributes using linear regression models. Upland switchgrass results highlight the complexity in plant responses to growing conditions because all production and environmental variables had strong relationships with one or more chemical attributes. Lowland switchgrass was limited to observations of year‐to‐year environmental variability and nitrogen application rate. All explanatory variable categories were important for lowland switchgrass models but stand age and precipitation relationships were particularly strong. The relationships found in this study can be used to understand spatial and temporal variation in switchgrass chemical attributes. The ability to predict chemical attributes critical for conversion processes in a geospatial/temporal manner would provide state‐of‐the‐art knowledge for risk assessment in the bioenergy and bioproducts industry.

09 BIOMASS FUELS↗

Comparisons of biomass, water use efficiency and water use strategies across five genomic groups of Populus and its hybrids

Abstract Genetic improvement and hybridization in the Populus genus have led to the development of genotypes exhibiting fast growth, high rooting ability and disease resistance. However, while large biomass production is important for bioenergy crops, efficient use of resources including water is also important in sites lacking irrigation and for maintaining ecosystem water availability. In addition, comparison of water use strategies across a range of growth rates and genetic variability can elucidate whether certain strategies are shared among the fastest growing and/or most water use efficient genotypes. We estimated tree water use throughout the second growing season via sapflow sensors of 48 genotypes from five Populus taxa; P. deltoides W. Bartram ex Marshall × P. deltoides (D × D), P. deltoides × P. maximowiczii A. Henry (D × M), P. deltoides × P. nigra L. (D × N), P. deltoides × P. trichocarpa Torr. & Gray (D × T) and P. trichocarpa × P. deltoides (T × D) and calculated average canopy stomatal conductance ( G S ). We regressed G S and atmospheric vapor pressure deficit (VPD) wherein the slope of the relationship represents stomatal sensitivity to VPD. At the end of the second growing season, trees were harvested, and their dry woody biomass was used to calculate whole tree water use efficiency (WUE T ). We found that D × D and D × M genotypes exhibited differing water use strategies with D × D genotypes exhibiting high stomatal sensitivity while retaining leaves while D × M genotypes lost leaf area throughout the growing season but exhibited low stomatal sensitivity. Across measured taxa, biomass growth was positively correlated with WUE T , and genotypes representing each measured taxa except D × N and T × D had high 2‐year dry biomass of above 6 kg/tree. Overall, these data can be used to select Populus genotypes that combine high biomass growth with stomatal sensitivity and WUE T to limit the negative impacts of bioenergy plantations on ecosystem water resources.

09 BIOMASS FUELS↗

Lipid–enhanced Oilcane does not impact soil carbon dynamics compared with wild–type Sugarcane

The carbon neutral potential of bioenergy relies in part on the ability of feedstocks to sequester carbon (C) in the soil. Sugarcane is one of the most widely used bioenergy crops, yet there remain unknowns about how it impacts soil C dynamics. In addition, Oilcane, a genetically modified version of Sugarcane has been produced to accumulate more energy-dense oils and less soluble lignin, which enhances conversion efficiency but may also impact soil C cycling. Thus, our objectives were to examine the impact of Sugarcane litter decomposition on soil C formation and losses and determine if the genetic modifications to produce Oilcane alter these dynamics. To do this, we incubated bagasse (processed stem litter) and leaf litter from Sugarcane and Oilcane in microcosms with forest soil for 11 weeks. We used differences in natural abundance δ 13 C between C 3 forest soil and C 4 litter to trace the fate of the litter into respiratory losses as well as stable and unstable soil C pools. Our results show that genetic modifications to Oilcane did not substantially alter soil C dynamics. Sugarcane and Oilcane litter both led to net soil C gains dominated by an accumulation of the added litter as unstable, particulate organic C (POC). Oilcane litter led to small but significantly greater net soil C gains than Sugarcane litter due to greater POC formation, but the formation of stable, mineral associated organic matter (MAOC) did not differ between crop types. Sugarcane and Oilcane had opposing effects on tissue type where Sugarcane bagasse formed more MAOC, while Oilcane leaves preferentially remained as POC which may have important management implications. These results suggest that genetic modifications to Sugarcane will not significantly impact soil C dynamics; however, this may not be universal to other crops particularly if modifications lead to greater differences in litter chemistry.

09 BIOMASS FUELS↗

Introduction: Integrative Approaches for Estimating Current and Future Feedstock Availability

Biomass that is used to generate energy, through conversion processes or direct combustion, is referred to as a bioenergy feedstock. Establishment of bioenergy feedstocks as an agricultural commodity has the potential to alter land management, carbon stocks, water quality, and greenhouse gas emissions over large geographic areas. Estimation of current and future feedstock availability is an essential step in assessing potential environmental and economic impacts of feedstock production. The purpose of this special issue is to communicate integrative approaches that combine data and modeling capabilities for estimation of current and future feedstock availability.

09 BIOMASS FUELS↗