Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Antennas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

The mechanical design of the horn-reflector antenna and radome

This paper describes the mechanical design of the horn-reflector antenna and the associated radome. The mechanical considerations dictating the final configuration of the antenna structure are discussed, along with the engineering aspects of the design, fabrication, and erection of the structure. The mechanical features of the data take-off and antenna drive systems are given in detail. The final section presents an account of the requirements, manufacture, and installation of the radome and its accessory equipment.

HORN ANTENNA↗

On the cross-polarization characteristics of crooked wire antennas designed by genetic-algorithms

In many modern communication applications there is a need for simple circularly polarized antennas for hemispherical coverage with good axial ratio or low value of cross polarization. We revisited the crooked wire antenna because of its simplicity. This paper presents results of our investigation on the crooked wire antennas and other elements.

genetic algorithms communications crooked wire ant↗

Architectural study of active membrane antennas

One method to dramatically reduce the weight, volume and associated cost of space-based SyntheticAperture Radars (SAR) is to replace the conventional rigid manifold antenna architecture with a flexible thin-film membrane. This has been successfully demonstrated as a passive array. To further reduce the cost and weight and provide 2D scanning required by space-based applications we also need to integrate the Transmit/Receive (TR) function into the inflatable antenna elements. This paper explores the constraints that must be placed on the active electronics of a flexible antenna array as well as some of the preliminary work in this area.

active membrane antenna SAR Synthetic Aperture Rad↗

Effect of Aperture Averaging Upon Tropospheric Phase Fluctuations Seen with a Radio Antenna

The spectrum of tropospheric phase fluctuations expected for a radio antenna at timescales < 100s on a space to ground link has been calculated. A new feature included in these calculations is the effect of aperture averaging, which causes a reduction in delay fluctuations on timescales less that the antenna windspeed crossing time, ~D/(8m/s) (D is the antenna diameter).

radio antenna phase fluctuations aperture averagin↗

A New Technique for Vernier Pointing of a Beam-Waveguide Antenna

This paper presents a new and simple approach for the Ka-band vernier pointing of a 34m beam-waveguide (BWG) antenna (also applicable to a 70m antenna. In this study, rotation of a BWG flat mirror, located at the elevation axis, is used to scan the beam instead of using the very large tipping structure of the antenna.

antenna pointing vernier pointing beam-waveguide K↗

Low Cost Antennas for Direct Broadcast Satellite Radio

This paper describes the low cost antennas developed at JPL. They are the drooping dipole and the TM subscript 21 mode cicular patch antennas for mobile platforms as well as the medium gain antenna for indoor environments.

drooping dipole circular patch antennas mobile pla↗

Lower-cost architectures for large arays of small antennas

Future plans for NASA's Deep Space Network (DSN) call for the construction of arrays of small antennas to compliment and eventually replace the existing network of large single antennas. The motivation for this transformation is the need to support much higher downlink data rates in the future, along with the realization that the most cost-effective way to do this is though a large increase in total collecting area on the ground. As currently designed, the DSN arrays will consist of approximately four hundred 12-m diameter antennas at each of three longitudes, operating at X and Ka bands (8 and 32 GHz).

small antennas↗

New Algorithms for Estimating Spacecraft Position Using Scanning Techniques for Deep Space Network Antennas

As more and more nonlinear estimation techniques become available, our interest is in finding out what performance improvement, if any, they can provide for practical nonlinear problems that have been traditionally solved using linear methods. In this paper we examine the problem of estimating spacecraft position using conical scan (conscan) for NASA's Deep Space Network antennas. We show that for additive disturbances on antenna power measurement, the problem can be transformed into a linear one, and we present a general solution to this problem, with the least square solution reported in literature as a special case. We also show that for additive disturbances on antenna position, the problem is a truly nonlinear one, and we present two approximate solutions based on linearization and Unscented Transformation respectively, and one 'exact' solution based on Markov Chain Monte Carlo (MCMC) method. Simulations show that, with the amount of data collected in practice, linear methods perform almost the same as MCMC methods. It is only when we artificially reduce the amount of collected data and increase the level of noise that nonlinear methods show significantly better accuracy than that achieved by linear methods, at the expense of more computation.

Metropolis-Hastings (MH)↗

Dynamic Analysis of Large In-Space Deployable Membrane Antennas

This paper presents a vibration analysis of an eight-meter diameter membrane reflectarray antenna, which is composed of a thin membrane and a deployable frame. This analysis process has two main steps. In the first step, a two-variable-parameter (2-VP) membrane model is developed to determine the in-plane stress distribution of the membrane due to pre-tensioning, which eventually yields the differential stiffness of the membrane. In the second step, the obtained differential stiffness is incorporated in a dynamic equation governing the transverse vibration of the membrane-frame assembly. This dynamic equation is then solved by a semi-analytical method, called the Distributed Transfer Function Method (DTFM), which produces the natural frequencies and mode shapes of the antenna. The combination of the 2-VP model and the DTFM provides an accurate prediction of the in-plane stress distribution and modes of vibration for the antenna.

vibrations↗

Compact, Lightweight Dual-Frequency Microstrip Antenna Feed for Future Soil Moisture and Sea Surface Salinity Missions

The development of a compact, lightweight, dual-frequency antenna feed for future soil moisture and sea surface salinity (SSS) missions is described. The design is based on the microstrip stacked-patch array (MSPA) to be used to feed a large lightweight deployable rotating mesh antenna for spaceborne L-band (approx.1 GHz) passive and active sensing systems. The design features will also enable applications to airborne soil moisture and salinity remote sensing sensors operating on small aircrafts. This paper describes the design of stacked patch elements and 16-element array configuration. The results from the return loss, antenna pattern measurements and sky tests are also described.

microstrip antennas↗

Optical Links and RF Distribution for Antenna Arrays

An array of three antennas has recently been developed at the NASA Jet Propulsion Laboratory capable of detecting signals at X and Ka band. The array requires a common frequency reference and high precision phase alignment to correlate received signals. Frequency and timing references are presently provided from a remotely located hydrogen maser and clock through a combination of commercially and custom developed optical links. The selected laser, photodetector, and fiber components have been tested under anticipated thermal and simulated antenna rotation conditions. The resulting stability limitations due to thermal perturbations or induced stress on the optical fiber have been characterized. Distribution of the X band local oscillator includes a loop back and precision phase monitor to enable correlation of signals received from each antenna.

antenna array↗

Antenna Linear-Quadratic-Gaussian (LQG) Ccontrollers: Properties, Limits of Performance, and Tuning

The LQG controllers significantly improve antenna tracking precision, but their tuning is a trial-and-error process. A control engineer has two tools to tune an LQG controller: the choice of coordinate system of the controller, and the selection of weights of the LQG performance index. The paper selects the coordinates of the open-loop model that simplify the shaping of the closed-loop performance. and analyzes the impact of thc weights on the antenna closed-loop bandwidth, disturbance rejection properties, and antenna acceleration. Finally, it presents the LQG controller tuning procedure that rationally shapes the closed-loop performance.

control technology↗

Antenna and Electronics Cost Tradeoffs For Large Arrays

This viewgraph presentation describes the cost tradeoffs for large antenna arrays. The contents include: 1) Cost modeling for large arrays; 2) Antenna mechanical cost over a wide range of sizes; and 3) Cost of per-antenna electronics.

antenna mechanical costs↗

Distributed Antenna-Coupled TES for FIR Detectors Arrays

We describe a new architecture for a superconducting detector for the submillimeter and far-infrared. This detector uses a distributed hot-electron transition edge sensor (TES) to collect the power from a focal-plane-filling slot antenna array. The sensors lay directly across the slots of the antenna and match the antenna impedance of about 30 ohms. Each pixel contains many sensors that are wired in parallel as a single distributed TES, which results in a low impedance that readily matches to a multiplexed SQUID readout These detectors are inherently polarization sensitive, with very low cross-polarization response, but can also be configured to sum both polarizations. The dual-polarization design can have a bandwidth of 50The use of electron-phonon decoupling eliminates the need for micro-machining, making the focal plane much easier to fabricate than with absorber-coupled, mechanically isolated pixels. We discuss applications of these detectors and a hybridization scheme compatible with arrays of tens of thousands of pixels.

antenna↗