SEARCH · Engineering Papers

Results for “Aircraft design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Development of a low risk augmentation system for an energy efficient transport having relaxed static stability

An augmentation system for a 230 passenger, twin engine aircraft designed with a relaxation of conventional longitudinal static stability was developed. The design criteria are established and candidate augmentation system control laws and hardware architectures are formulated and evaluated with respect to reliability, flying qualities, and flight path tracking performance. The selected systems are shown to satisfy the interpreted regulatory safety and reliability requirements while maintaining the present DC 10 (study baseline) level of maintainability and reliability for the total flight control system. The impact of certification of the relaxed static stability augmentation concept is also estimated with regard to affected federal regulations, system validation plan, and typical development/installation costs.

Sizlo, T. R.↗

NASA NTRS1981

Trends and pacing items in computational aerodynamics

A perspective is presented of trends in computational aerodynamics, and of important technology development items that pace future advanced applications. From a survey of AIAA Journal papers published during the past two decades, the growth trends and the progressively increasing emphasis on code development for viscous, compressible, turbulent flow are illustrated. These trends are reflected in the chronology of introduction by the aerospace industry of new computational methods in aircraft design. Key pacing items outlined are: automatic grid generation for nonlinear inviscid computations; advanced computers, improved efficiency of numerical methods, and improved turbulence models for Reynolds-averaged Navier-Stokes computations; advanced computers, time-dependent three-dimensional law-of-the-wall, code development, improved efficiency of numerical methods, and improved subgrid-scale turbulence modeling for large eddy simulations.

Chapman, D. R.↗

NASA NTRS1981

The phenomenon of dynamic stall

Dynamic stall and its consequences which are important to aircraft design and operation are discussed. A certain degree of unsteadyness always accompanies the flow over streamlined bodies at high angle of attack, however, the stall of lifting surface undergoing unsteady motion is more complex than static stall. Dynamic stall remains a major unsolved problem with a variety of applications in aeronautics, hydrodynamics and wind engineering.

Mccroskey, W. J.↗

NASA NTRS1983

Experimental Experience at Calspan

A partial list of controllers; multiple means of generating forces and moments available; control power requirements; new aircraft design vs existing configuration; critical technology areas; parameter identification; and types of failure or emergency for reconfiguration are considered.

Ryanski, E. G.↗

NASA NTRS1983

Investigation of air transportation technology at Princeton University

The Air Transportation Technology Program at Princeton University, a program emphasizing graduate and undergraduate student research, proceeded along six avenues during the past year: investigation of fuel use characteristics of general aviation aircraft, experimentation with an ultrasonic altimeter, single pilot instrument flight, application of fiber optics in flight control systems, voice recognition inputs for navigation/communication receiver tuning, and computer aided aircraft design.

Stengel, R. F.↗

NASA NTRS1983

Guidelines for composite materials research related to general aviation aircraft

Guidelines for research on composite materials directed toward the improvement of all aspects of their applicability for general aviation aircraft were developed from extensive studies of their performance, manufacturability, and cost effectiveness. Specific areas for research and for manufacturing development were identified and evaluated. Inputs developed from visits to manufacturers were used in part to guide these evaluations, particularly in the area of cost effectiveness. Throughout the emphasis was to direct the research toward the requirements of general aviation aircraft, for which relatively low load intensities are encountered, economy of production is a prime requirement, and yet performance still commands a premium. A number of implications regarding further directions for developments in composites to meet these requirements also emerged from the studies. Chief among these is the need for an integrated (computer program) aerodynamic/structures approach to aircraft design.

Dow, N. F.↗

NASA NTRS1984

Facilities for meteorological research at NASA Goddard/Wallops Flight Facility

The technical characteristics of the Atmospheric Sciences Research Facility, the improvements being made to the instrumentation there which will enhance its usefulness in atmospheric research, and several of the on-going research programs are described. Among the area of atmospheric research discussed are clouds and precipitation, lightning, ozone, wind, and storms. Meteorological instruments including Doppler radar, spectrophotometers, and ozone sensors are mentioned. Atmospheric research relevant to aircraft design and COMSTAR communication satellites is briefly discussed.

Gerlach, J. C.↗

NASA NTRS1984

An Analysis of Wave Interactions in Swept-Wing Flows

Crossflow instabilities dominate disturbance growth in the leading-edge region of swept wings. Streamwise vortices in a boundary layer strongly influence the behavior of other disturbances. Amplification of crossflow vortices near the leading edge produces a residual spanwise nonuniformity in the mid-chord regions where Tollmien-Schlichting (T-S) waves are strongly amplified. Should the T-S wave undergo double-exponential growth because of this effect, the usual transition prediction methods would fail. The crossflow/Tollmien-Schlichting wave interaction was modeled as a secondary instability. The effects of suction are included, and different stability criteria are examined. The results are applied to laminar flow control wings characteristic of energy-efficient aircraft designs.

Reed, H. L.↗

NASA NTRS1984

Acoustic excitation: A promising new means of controlling shear layers

Techniques have long been sought for the controlled modification of turbulent shear layers, such as in jets, wakes, boundary layers, and separated flows. Relatively recently published results of laboratory experiments have established that coherent structures exist within turbulent flows. These results indicate that even apparently chaotic flow fields can contain deterministic, nonrandom elements. Even more recently published results show that deliberate acoustic excitation of these coherent structures has a significant effect on the mixing characteristics of shear layers. Therefore, we have initiated a research effort to develop both an understanding of the interaction mechanisms and the ability to use it to favorably modify various shear layers. Acoustic excitation circumvents the need for pumping significant flow rates, as required by suction or blowing. Control of flows by intentional excitation of natural flow instabilities involves new and largely unexplored phenomena and offers considerable potential for improving component performance. Nonintrusive techniques for flow field control may permit much more efficient, flexible propulsion systems and aircraft designs, including means of stall avoidance and recovery. The techniques developed may also find application in many other areas where mixing is important, such as reactors, continuous lasers, rocket engines, and fluidic devices. It is the objective of this paper to examine some potential applications of the acoustic excitation technique to various shear layer flows of practical aerospace systems.

Stone, J. R.↗

NASA NTRS1983

Voice interactive electronic warning systems (VIEWS) - An applied approach to voice technology in the helicopter cockpit

The cockpit has been one of the most rapidly changing areas of new aircraft design over the past thirty years. In connection with these developments, a pilot can now be considered a decision maker/system manager as well as a vehicle controller. There is, however, a trend towards an information overload in the cockpit, and information processing problems begin to occur for the rotorcraft pilot. One approach to overcome the arising difficulties is based on the utilization of voice technology to improve the information transfer rate in the cockpit with respect to both input and output. Attention is given to the background of speech technology, the application of speech technology within the cockpit, voice interactive electronic warning system (VIEWS) simulation, and methodology. Information subsystems are considered along with a dynamic simulation study, and data collection.

Voorhees, J. W.↗

NASA NTRS1985

Retractable End Plates for Aircraft Lifting Surfaces

End plates and winglets improve aerodynamic characteristics of aircraft wings and other fixed lifting surfaces. Retractable end plates automatically actuated by same shaft that deflects lifting surface and require little or no extra power and absolutely no control input from cockpit. Besides being modular in construction, easily fitted to any existing aircraft design with only minor modifications.

Harvey, W. D.↗

NASA NTRS1985

Flight testing the fixed-wing configuration of the Rotor Systems Research Aircraft (RSRA)

The Rotor Systems Research Aircraft (RSRA) is a unique research aircraft designed to flight test advanced helicopter rotor system. Its principal flight test configuration is as a compound helicopter. The fixed wing configuration of the RSRA was primarily considered an energy fly-home mode in the event it became necessary to sever an unstable rotor system in flight. While it had always been planned to flight test the fixed wing configuration, the selection of the RSRA as the flight test bed for the X-wing rotor accelerated this schedule. This paper discusses the build-up to, and the test of, the RSRA fixed wing configuration. It is written primarily from the test pilot's perspective.

Hall, G. W.↗

NASA NTRS1984

Computer study of a jet flap ASTVOL 'Harrier'

A study of the costs/benefits trade-off was conducted for an Advanced Supersonic Short Takeoff and Vertical Landing (ASTOVL) aircraft incorporating a jet flap. The data used were the theory of jet flaps and high aspect ratio nozzles, experience with a V/STOL aircraft study performed for NASA Ames Research Center in February 1982, and a high performance aircraft-synthesis program (ACSYNT). The methodology was to accurately model the supersonic Harrier V/STOL aircraft design on ACSYNT, and then modify the design by both adding high aspect-ratio nozzles in place of the rear (core-flow) nozzles on the Pegasus-type turbofan engine, and integrating these nozzles on each wing's trailing edge, thus creating a jet flap. The predicted performance advantages (increase in maximum lift coefficient with flap deflection and horizontal thrust recovery) were traded off against the disadvantages (additional weight and thrust loss due to ducting) on two representative missions.

Wilson, S. B., III↗

NASA NTRS1986

Five-Parameter Bivariate Probability Distribution

NASA technical memorandum presents four papers about five-parameter bivariate gamma class of probability distributions. With some overlap of subject matter, papers address different aspects of theories of these distributions and use in forming statistical models of such phenomena as wind gusts. Provides acceptable results for defining constraints in problems designing aircraft and spacecraft to withstand large wind-gust loads.

Tubbs, J.↗

NASA NTRS1986

Three-dimensional boundary layer analysis program Blay and its application

The boundary layer calculation program (BLAY) is a program code which accurately analyzes the three-dimensional boundary layer of a wing with an undefined plane. In comparison with other preexisting programs, the BLAY is characterized by the following: (1) the time required for computation is shorter than any other; (2) the program is adaptable to a parallel processing computer; and (3) the program is associated with a secondary accuracy in the z-direction. As a boundary layer modification to transonic nonviscous flow analysis programs, it is used to adjust viscous and nonviscous interference problems repeatedly. Its efficiency is an important factor in cost reduction in aircraft designing.

Matsuno, K. I.↗

NASA NTRS1986

Aerodynamic Characteristics of a Supersonic Fighter Aircraft Model at Mach 0.40 to 2.47

The aerodynamic characteristics of an advanced twin-engine fighter aircraft designed for supersonic cruise have been studied in the Langley 16-Foot Transonic Tunnel and the Lewis 10- by 10-Foot Supersonic Tunnel. The objective of this investigation was to establish an aerodynamic data base for the configuration with flow-through nacelles and representative inlets. The use of a canard for trim and the effects of fairing over the inlets were assessed. Comparisons between experimental and theoretical results were also made. The theoretical results were determined by using a potential vortex lift code for subsonic speeds and a linear aerodynamic code for supersonic speeds. This investigation was conducted at Mach numbers from 0.40 to 2.47, at angles of attack from 0 deg to about 20 deg, and at inlet capture ratios of about 0.5 to 1.4.

Capone, F. J.↗

NASA NTRS1985

A parametric evaluation of supersonic STOVL

This paper describes the results of a study to evaluate parametric variations to a single engine short-takeoff vertical-landing fighter/attack aircraft design. The variables considered involved thrust vectoring, thrust degradation, maximum lift, and other changes to determine the impact on short-takeoff performance, but subject to a vertical-landing capability. The results indicate that there are certain parameters that have a significant effect on short-field performance. Also, the optimal control strategies for transitions from a short-takeoff to forward flight and from forward flight to hover are determined. The results have applicability beyond the configuration evaluated.

Kidwell, G. H.↗

NASA NTRS1984

Flight testing the fixed wing configuration of the Rotor Systems Research Aircraft (RSRA)

The Rotor Systems Research Aircraft (RSRA) is a unique research aircraft designed to flight test advanced helicopter rotor system. Its principal flight test configuration is as a compound helicopter. The fixed wing configuration of the RSRA was primarily considered an energy fly-home mode in the event it became necessary to sever an unstable rotor system in flight. While it had always been planned to flight test the fixed wing configuraion, the selection of the RSRA as the flight test bed for the x-wing rotor accelerated this schedule. This paper discusses the build-up to, and the test of, the RSRA fixed wing configuration. It is written primarily from the test pilot's perspective.

Hall, G. W.↗