Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Agree”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Evaluation of Nimbus 7 THIR/CLE and Air Force three-dimensional Nephanalysis estimates of cloud amount

Three different estimates of the percent of fixed geographical regions (160 x 160 km) either free of cloud (clear) or covered by low, middle, and high (opaque) cloud have been intercompared. The estimates were derived by analysts interpreting geosynchronous satellite images, with concurrent meteorological observations; from Nimbus 7 temperature humidity infrared radiometer (THIR) CLOUD ERB (CLE) data; and from Air Force three dimensional nephanalysis (3DN) data. Air Force 3DN agrees better with the analyst than THIR/CLE, except for high cloud amount; the CLE and 3DN results tend to overestimate clear amount when clear amount is large and underestimate it when clear amount is small, by 10-20 percent for CLE and by 5-10 percent for 3DN, and both agree well with the analyst in the mean. Systematic and random errors for 3DN and CLE are specified. CLE estimates of cloud amount over land at night should not be used for scientific purposes unless restricted to high cloud amount. It is believed that the CLR and 3DN are the only two digitized, global cloud type and amount data sets in existence.

Stowe, L. L.↗

Multiline Transfer and the Dynamics of Stellar Winds

A Monte Carlo technique for treating multiline transfer in stellar winds is described. With a line list containing many thousands of transitions and with fairly realistic treatments of ionization, excitation and line formation, the resulting code allows the dynamic effects of overlapping lines the investigation of and provides the means to directly synthesize the complete spectrum of a star and its wind. It is found that the computed mass loss rate for data Puppis agrees with the observed rate. The synthesized spectrum of zeta Puppis also agrees with observational data. This confirms that line driving is the dominant acceleration mechanism in this star's wind.

Abbott, D. C.↗

An Earth longwave radiation climate model

An Earth outgoing longwave radiation (OLWR) climate model was constructed for radiation budget study. Required information is provided by on empirical 100mb water vapor mixing ratio equation of the mixing ratio interpolation scheme. Cloud top temperature is adjusted so that the calculation would agree with NOAA scanning radiometer measurements. Both clear sky and cloudy sky cases are calculated and discussed for global average, zonal average and world-wide distributed cases. The results agree well with the satellite observations. The clear sky case shows that the OLWR field is highly modulated by water vapor, especially in the tropics. The strongest longitudinal variation occurs in the tropics. This variation can be mostly explained by the strong water vapor gradient. Although in the zonal average case the tropics have a minimum in OLWR, the minimum is essentially contributed by a few very low flux regions, such as the Amazon, Indonesian and the Congo.

Yang, S. K.↗

DC-10 winglet flight evaluation

The results of a flight evaluation of winglets on a DC-10 Series 10 aircraft are presented. For sensitive areas of comparison, effects of winglets were determined back to back with and without winglets. Basic and reduced span winglet configurations were tested. After initial encounter with low speed buffet, a number of acceptable configurations were developed. For maximum drag reduction at both cruise and low speeds, lower winglets were required, having leading edge devices on upper and lower winglets for the latter regime. The cruise benefits were enhanced by adding outboard aileron droop to the reduced span winglet aircraft. Winglets had no significant impact on stall speeds, high speed buffet boundary, and stability and control characteristics. Flutter test results agreed with predictions and ground vibration data. Flight loads measurement also agreed with predictions.

Source record↗

Stresses and deformations in cross-ply composite tubes subjected to a uniform temperature change: Elasticity and Approximate Solutions

The effects of a uniform temperature change on the stresses and deformations of composite tubes are investigated. The accuracy of an approximate solution based on the principle of complementary virtual work is determined. Interest centers on tube response away from the ends and so a planar elasticity approach is used. For the approximate solution a piecewise linear variation of stresses with the radial coordinate is assumed. The results from the approximate solution are compared with the elasticity solution. The stress predictions agree well, particularly peak interlaminar stresses. Surprisingly, the axial deformations also agree well. This, despite the fact that the deformations predicted by the approximate solution do not satisfy the interface displacement continuity conditions required by the elasticity solution. The study shows that the axial thermal expansion coefficient of tubes with a specific number of axial and circumferential layers depends on the stacking sequence. This is in contrast to classical lamination theory which predicts the expansion to be independent of the stacking arrangement. As expected, the sign and magnitude of the peak interlaminar stresses depends on stacking sequence.

Hyer, M. W.↗

Ablation of Galileo Probe heat-shield models in a ballistic range

Several 1/24-scale models of the Galileo Probe made of carbon-phenolic materials were flown in a ballistic range to test their ablation characteristics. Mostly radiative or all-convective heating environments were produced by using argon or air as the test gas, respectively, to simulate the Jovian entry heating environments. The experimental results were compared with the theoretical predictions made using the computer codes of radiating shock layer environment (RASLE) and charring materials ablation (CMA). The experimental data obtained in argon agreed approximately with the theoretical predictions. The data for air agreed approximately with the theory when turbulence and surface roughness effects were accounted for. The data imply that the Galileo Probe heat shield was adequately designed.

Park, C.↗

Atmospheric water distribution in a midlatitude cyclone observed by the Seasat Scanning Multichannel Microwave Radiometer

Patterns in the horizontal distribution of integrated water vapor, integrated liquid water and rainfall rate derived from the Seasat Scanning Multichannel Microwave Radiometer (SMMR) during a September 10-12, 1978 North Pacific cyclone are studied. These patterns are compared with surface analyses, ship reports, radiosonde data, and GOES-West infrared satellite imagery. The SMMR data give a unique view of the large mesoscale structure of a midlatitude cyclone. The water vapor distribution is found to have characteristic patterns related to the location of the surface fronts throughout the development of the cyclone. An example is given to illustrate that SMMR data could significantly improve frontal analysis over data-sparse oceanic regions. The distribution of integrated liquid water agrees qualitatively well with corresponding cloud patterns in satellite imagery and appears to provide a means to distinguish where liquid water clouds exist under a cirrus shield. Ship reports of rainfall intensity agree qualitatively very well with SMMR-derived rainrates. Areas of mesoscale rainfall, on the order of 50 km x 50 km or greater are detected using SMMR derived rainrates.

Mcmurdie, L. A.↗

Inference of high-latitude ionization and conductivity from AE-C measurements of auroral electron fluxes

Electron fluxes in the kilovolt energy range measured by the AE-C satellite have been used to infer the latitudinal distribution of ionization at high latitudes in the altitude range 90 to 200 km. These distributions are compared with simultaneous measurements of electron density by the Chatanika incoherent scatter radar. The study was based on more than 120 electron density profiles obtained on three different nights at magnetic local times between 0200 and 0400. The calculated distributions agree very well with the altitude and latitude distributions measured by the radar. The only obvious difference was the presence in the radar data of additional ionization produced by solar illumination. A comparison was also conducted of the height-integrated electrical conductivities computed from the measured profiles and those inferred from the satellite measurements. For Hall and Pedersen conductances greater than 5 mhos, the agreement is within 25 percent. The data were also used to deduce the altitude profile of the effective recombination coefficient. This profile agrees well with the results of previous studies.

Vondrak, R.↗

Computation of leading-edge vortex flows

The simulation of the leading edge vortex flow about a series of conical delta wings through solution of the Navier-Stokes and Euler equations is studied. The occurrence, the validity, and the usefulness of separated flow solutions to the Euler equations of particular interest. Central and upwind difference solutions to the governing equations are compared for a series of cross sectional shapes, including both rounded and sharp tip geometries. For the rounded leading edge and the flight condition considered, viscous solutions obtained with either central or upwind difference methods predict the classic structure of vortical flow over a highly swept delta wing. Predicted features include the primary vortex due to leading edge separation and the secondary vortex due to crossflow separation. Central difference solutions to the Euler equations show a marked sensitivity to grid refinement. On a coarse grid, the flow separates due to numerical error and a primary vortex which resembles that of the viscous solution is predicted. In contrast, the upwind difference solutions to the Euler equations predict attached flow even for first-order solutions on coarse grids. On a sufficiently fine grid, both methods agree closely and correctly predict a shock-curvature-induced inviscid separation near the leeward plane of symmetry. Upwind difference solutions to the Navier-Stokes and Euler equations are presented for two sharp leading edge geometries. The viscous solutions are quite similar to the rounded leading edge results with vortices of similar shape and size. The upwind Euler solutions predict attached flow with no separation for both geometries. However, with sufficient grid refinement near the tip or through the use of more accurate spatial differencing, leading edge separation results. Once the leading edge separation is established, the upwind solution agrees with recently published central difference solutions to the Euler equations.

Newsome, R. W.↗

Upwind Navier-Stokes solutions for separated periodic flows

The application of an upwind implicit approximate factorization Navier-Stokes algorithm to highly separated flow is described. Using both the thin-layer and complete forms of the Navier-Stokes equations, the low Reynolds number laminar flow around a circular cylinder with periodic shedding is solved. The effect of grid density, grid extent, and time step on the Strouhal number is shown. Results from both sets of equations agree within the experimental data band. Unsteady, laminar flow computations around inclined plates and separated airfoils are also described. Strouhal numbers agree to within 5 percent of experiments for inclined plates. Differences between the complete equations and the thin-layer approximation for separated periodic flows are discussed. Computations of an impulsively started circular cylinder and airfoil yield time-accurate flowfield shapes in good agreement with experimental flow visualizations. The turbulent computation of an airfoil at a high angle-of-attack is massively separated, but shows no evidence of periodicity.

Rumsey, C. L.↗

Comparison of regional clear-sky albedos inferred from satellite observations and model computations

A comparison of model- and satellite-inferred clear sky top-of-atmosphere (TOA) albedos is presented. The clear sky albedos were inferred from GOES-2 observations for November 1978 over South America and most of North America and adjacent ocean regions. The model albedos were computed on a 1 deg X 1 deg latitude-longitude grid, allowing for variations in surface vegetation type, solar zenith angle, orography, and spectral absorption/scattering. Over the ocean areas, the observed and calculated TOA albedos agree within + or - 1 percent, while the albedos over land mostly agree within + or - 2 percent for the entire range of significant geographical variation of albedo from 13 percent over the Amazon Basin to 24 percent over mountains of western North America. Both the ocean and land agreements lie within the theoretical and observational uncertainties.

Briegleb, B. P.↗

Stresses and deformations in cross-ply composite tubes subjected to a uniform temperature change

This study investigates the effects of a uniform temperature change on the stresses and deformations of composite tubes and determines the accuracy of an approximate solution based on the principle of complementary virtual work. Interest centers on tube response away from the ends and so a planar elasticity approach is used. For the approximate solution a piecewise linear variation of stresses with the radial coordinate is assumed. The results from the approximate solution are compared with the elasticity solution. The stress predictions agree well, particularly peak interlaminar stresses. Surprisingly, the axial deformations also agree well, despite the fact that the deformations predicted by the approximate solution do not satisfy the interface displacement continuity conditions required by the elasticity solution. The study shows that the axial thermal expansion coefficient of tubes with a specific number of axial and circumferential layers depends on the stacking sequence. This is in contrast to classical lamination theory, which predicts that the expansion will be independent of the stacking arrangement. As expected, the sign and magnitude of the peak interlaminar stresses depend on stacking sequence. For tubes with a specific number of axial and circumferential layers, thermally induced interlaminar stresses can be controlled by altering stacking arrangement.

Hyer, M. W.↗

Assimilation of scatterometer winds into surface pressure fields using a variational method

A variational formulation was used to assimilate Seasat-A scatterometer (SASS) surface wind measurements near and during a severe storm in the North Atlantic into conventional National Meteorological Center sea level pressure fields. An estimate of the relative vorticity at every point on a grid was calculated using each of these two data sets. A solution to a modified geostrophic stream function is found subject to the constraints that (1) the relative vorticities calculated from the data agree as closely as possible with the relative vorticities from the variational solution, and that (2) the average kinetic energy is a minimum. Results are obtained which support the idea that averaged satellite data can be treated as synoptic data. Direct substitution rather than a time-weighted insertion made from SASS winds generally resulted in more accurate pressure analyses. In addition, this relatively simple model provides surface pressure fields which agree extremely well with surface truth and the results of other investigators who required additional sources of input data into more complex models. It will be possible to obtain improved wind field maps from future scatterometer pressure fields in mid-latitudes.

Harlan, J., Jr.↗

DC-10 winglet flight evaluation

Results of a flight evaluation of winglets on a DC-10 Series 10 aircraft are presented. For sensitive areas of comparison, effects of winglets were determined back-to-back with and without winglets. Basic and reduced-span winglet configurations were tested. After initial encounter with low-speed buffet, a number of acceptable configurations were developed. For maximum drag reduction at both cruise and low speeds, lower winglets were required, having leading edge devices on upper and lower winglets for the latter regime. The cruise benefits were enhanced by adding outboard aileron droop to the reduced-span winglet aircraft. Winglets had no significant impact on stall speeds, high-speed buffet boundary, and stability and control. Flutter test results agreed with predictions and ground vibration data. Flight loads measurement, provided in a concurrent program, also agreed with predictions. It was estimated that a production version of the aircraft, using the reduced-span winglet and aileron droop, would yield a 3-percent reduction in fuel burned with capacity payload. This range was 2% greater than with winglets. A 5% reduction in takeoff distance at maximum takeoff weight would also result.

Taylor, A. B.↗

On the direct and dissociative excitation of the O(3s 3S0) state by electron impact on atomic and molecular oxygen

The ratio of the cross sections for the direct and dissociative excitation of the OI(3s 3S0-2p 3P; 1304 A wavelength) transition, sigma A/sigma D, are accurately determined, and the sigma A/sigma D ratio is directly normalized to the ratio of the O(+) and O2(+) ionization cross sections using a high-density diffuse gas source, an electrostatically focused electron gun, a vacuum-ultraviolet monochromater, and a quadrupole mass spectrometer for simultaneous optical and composition measurements. Using revised sigma A(1304 A) values calculated with new calibration standards, the shape of the cross section for the excitation of the O(3s 3S0) state agrees well with previous results, though the absolute magnitude of sigma A(1304 A) is smaller than the results of Stone and Zipf (1974) by a factor of 2.8. The revised cross sections agree well with recent quantum calculations when cascade excitation of the 3s 3S0 state is taken into account.

Zipf, E. C.↗

Strake-generated vortex interactions for a fighter-like configuration

A combination of the Euler, and thin-layer Navier-Stokes equations were solved for the flowfield around a wing-strake-fuselage configuration similar to the F-16A aircraft. The flowfield was divided into multiple blocks using a zoning program, and the TNSWF solution program, based on an implicit solution algorithm, updates each subregion of the flowfield sequentially. The total grid contained approximately 300,000 grid points, and clustering was effected normal to all aircraft surfaces. The computed solutions agreed well quantitatively with wind-tunnel pressure distribution data, and they agreed well qualitatively with flow visualization from wind- and water-tunnel tests.

Reznick, Steven G.↗

A full CI treatment of the 1A1, 1B1, and 3B1 states of SiH2

Full CI calculations are presented for the 1A1, 3B1, and 1B1 states of SiH2 at their respective equilibrium geometries and at geometries with the SiH bonds stretched. These results are compared with those obtained from single-reference and multireference CI calculations. The computed Te values agree well with the full CI results, provided that the effects of higher-than-double excitations are accounted for either by the Davidson correction or by a multireference approach. When the SiH bonds are stretched, the single-reference methods are not sufficiently flexible, and only CASSCF/MRCI achieves chemical accuracy (i.e., agrees with the full CI to 1 kcal/mol). Overall, the accuracy of the various approximate methods is very similar to that found for H2O, NH2, and CH2.

Bauschlicher, Charles W., Jr.↗

An assessment of the small-crack effect for 2024-T3 aluminum alloy

Data on small-crack behavior were obtained for a single-edge-notched tensile specimen made of 2024-T3 Al alloy and used to evaluate the capability of a semiempirical crack-growth and closure model to predict the fatigue life of notched specimens. Fatigue tests were conducted under either constant-amplitude loading (with stress ratios of 0.5, 0, -1, and -2) or spectrum loading, using a replication technique to record growth. It was found that small cracks exhibited the 'small-crack' effect in that they grew faster than large cracks when subjected to the same stress intensity factor range. Experimental small-crack growth rates agreed well with the model predictions. For making predictions of fatigue life, an initial surface defect void size of 3 x 12 x 0.4 microns was used in all calculations; predicted fatigue lives agreed well with experimentally determined values obtained in all tests. The crack-closure model indicated that the 'small-crack' effect on fatigue life was greatest in tests involving significant compressive loads.

Newman, J. C., Jr.↗