Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

High Thermoelectric Performance in Polycrystalline SnSe Via Dual-Doping with Ag/Na and Nanostructuring With Ag 8 SnSe 6

Single crystalline SnSe is one of the most intriguing new thermoelectric materials but the thermoelectric performance of polycrystalline SnSe seems to lag significantly compared to that of a single crystal. Here an effective strategy for enhancing the thermoelectric performance of p-type polycrystalline SnSe by Ag/Na dual-doping and Ag 8 SnSe 6 (STSe) nanoprecipitates is reported. The Ag/Na dual-doping leads to a two orders of magnitude increase in carrier concentration and a convergence of valence bands (VBM1 and VBM5), which in turn results in sharp enhancement of electrical conductivities and high Seebeck coefficients in the Ag/Na dual-doped samples. Additionally, the SnSe matrix becomes nanostructured with dispersed nanoprecipitates of the compound Ag 8 SnSe 6 , which further strengthens the scattering of phonons. Specifically, ≈20% reduction in the already ultralow lattice thermal conductivity is realized for the Sn 0.99 Na 0.01 Se–STSe sample at 773 K compared to the thermal conductivity of pure SnSe. Consequently, a peak thermoelectric figure of merit ZT of 1.33 at 773 K with a high average ZT (ZT ave ) value of 0.91 (423–823 K) is achieved for the Sn 0.99 Na 0.01 Se–STSe sample.

36 MATERIALS SCIENCE↗

Large-Area (Ag,Cu)(In,Ga)Se 2 Thin-Film Solar Cells with Increased Bandgap and Reduced Voltage Losses Realized with Bulk Defect Reduction and Front-Grading of the Absorber Bandgap

The 1.24 eV bandgap, 18.8% power conversion efficiency Ag-alloyed chalcopyrite (Ag,Cu)(In,Ga)Se 2 (ACIGS) solar cells are characterized to relate voltage and efficiency improvements to electro-optical (EO) characteristics. Shockley-Read-Hall recombination center defect density, identified and characterized through deep level transient spectroscopy and time-resolved photoluminescence (TRPL), is reduced through potassium and copper treatment optimization. Concomitantly, longer minority carrier lifetimes are achieved, which increases open-circuit voltage (V OC ). Near-conduction band defects associated in earlier studies with light-induced current instability are also mitigated. Analysis of charge-carrier dynamics after single- and two-photon excitation is used to separate recombination at the front interface and in the absorber bulk. From TRPL decay simulations, the authors estimate ranges of key solar cell material characteristics: bulk carrier lifetime T bulk = 110-210 ns, charge-carrier mobility u = 110-160 cm 2 V -1 s -1 , and front interface recombination velocity S front = 700-1050 cm s -1 . This lowest-reported S front for ACIGS absorbers originates from the notched conduction band grading, which also makes the impact of the back interface recombination negligible. It is suggested in the results that solar cell performance enhancements can be made most readily with two distinct strategies: improving device architecture and reducing semiconductor defect densities. Using these approaches, power conversion efficiency in large-area solar cells is improved by 1.1% absolute.

14 SOLAR ENERGY↗

Interstitial Atoms and the Frustrated and Allowed Structural Transitions Principle: Tunability in the Electronic Structure of AuCu 3 ‐type Frameworks in Dy 4 T 1− x Ga 12 (T = Ag, Ir)

In this Article, we explore how the chemical pressure (CP) features of an intermetallic phase may provide opportunities to couple perturbations in electron count with the stabilization of the underlying geometrical structure. AuCu 3 ‐type LnGa 3 (Ln = lanthanide or group 3 metal) phases contain octahedral cavities of negative CP held open by overly compressed Ln–Ga interactions, leading to a series of transition metal‐stuffed derivatives. We present new additions to this family with the synthesis and crystal structures of Dy 4 T 1−x Ga 12 with (T, x) = (Ag, 0.29) and (Ir, 0.15), adopting Y 4 PdGa 12 ‐type superstructures of the AuCu 3 ‐type. density functional Ttheory (DFT)‐CP calculations, when adjusted to avoid dipolar CP features, affirm that T atom incorporation provides a mechanism for the relief of packing tensions, while electronic density of states distributions illustrate that the T atoms serve largely as electron or hole donors to the band structure, as needed for them to attain d 10 configurations. The maximum obtainable value for x may be limited by a mismatch between the Fermi energy and pseudogap, in line with the balance of factors envisioned by the frustrated and allowed structural transitions principle. Furthermore, trends in resistivity measurements on T = Ir, Pd, and Ag compounds are interpretable in terms of the varying degrees of disorder arising from x < 1.0.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Giant Exchange Bias of Hysteresis Loops on Cr{sup 3+}-doped Ag Nanoparticles

In this study, we fabricate Cr-doped Ag nanoparticles (AgCrO{sub 2} and Ag{sub 0.5}Cr{sub 2.5}O{sub 4}) by flash autocombustion method. XRD confirmed that the samples have a single-phase spinel structure. The morphology is studied using high-resolution transmission electron microscopy (HRTEM) to confirm that the samples are on nanoscale. The magnetic properties are studied using a vibrating sample magnetometer (VSM) at room temperature (300 K) and at low temperatures (200 and 100 K). Exchange bias has occurred for the investigated samples below room temperatures. The shifts have occurred in the horizontal directions which may be ascribed to the frozen spins in the samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Electric and Magnetic Properties of Bi{sub 2}Sr{sub 2}Ag{sub 0.03}Ca{sub 1}Cu{sub 2}O{sub y} Ceramics Modified by Post-annealing

Polycrystalline Bi{sub 2}Sr{sub 2}Ag{sub 0.03}Ca{sub 1}Cu{sub 2}O{sub y} samples were fabricated using conventional solid-state reaction method. Then, post-annealing temperatures at 730, 780 and 830 {sup ∘}C were applied on samples while time was kept constant at 50 h. Both the x-ray diffraction (XRD) measurement and the scanning electron microscopy (SEM) showed that all samples have high amounts of Bi-2212 phase as the main phase, indicating that the selected starting composition is suitable to analyze the post-annealing effects on the flux pinning properties of Bi-2212 superconductors. In particular, flux pinning performance of Bi-2212 phase is observed from both the magnetic hysteresis loops and J{sub c} values calculated using Bean’s model. The highest J{sub c} value was obtained for sample which was not exposed to the post-annealing treatment. The results clearly show that post-annealing procedure in Bi{sub 2}Sr{sub 2}Ag{sub 0.03}Ca{sub 1}Cu{sub 2}O{sub y} system does not create artificial pinning centres, which lead to the improvements in J{sub c} at high magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Investigation of Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} Doping with Ag Nanoparticles and Its Application as Superconductor

Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} superconductors were prepared through a standard solid-state reaction and the structural properties of the samples were studied through XRD and the Rietveld refinement method. The effect of silver nanoparticles doping on the Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} superconductors was studied as well. It is known that the size of nanoparticles is increased during aging. Therefore, two batches of samples with 1 and 2 wt% of Ag nanoparticles and the size range of 30, 200, 500, 700, 800, and 1000 nm were prepared. After preparing the samples and observing the Meissner effect, the crystallography, critical current density, critical temperature, magnetic susceptibility, SEM, and EDX experiments of the samples were carried out. The results of the critical current density measurements showed that the sample with 2 wt% Ag nanoparticles and the size of 700 nm has the maximum current density. In both batches of samples, increasing the nanoparticle size to 700 nm led to an increase in the critical current density. The crystallography studies showed that silver nanoparticles do not insert into the superconductor’s frame. Actually, they are placed in the samples as a distinct phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of Transport Properties of Some Superconductor Nickel-Based Antiperovskite XNNi{sub 3} (X = Mg, Al, Cu, Zn, Ga, Ag, Cd, In, Sn, Sb, Pt and Pb)

We report, in this work, a theoretical study of electronic and transport (thermoelectric) properties of some superconductor nickel-based antiperovskite XNNi{sub 3} (X = Mg, Al, Cu, Zn, Ga, Ag, Cd, In, Sn, Sb, Pt and Pb) using first-principles calculations with the full-potential linearized augmented plane wave (FPLAPW) method based on the density functional theory (DFT) as implemented in the WIEN2k package. Electronic properties are calculated and show that the studied materials are of metallic type which is in good agreement with experimental data. The Seebeck coefficient, thermal conductivity, electrical conductivity and figure of merit were reported. The results obtained show that the zinc (Zn) and silver (Ag) materials are characterized by a high value of the figure of merit at room temperature (300 K) which is respectively 0.86 and 1.02 in a p-type region. In the case of the transition metals, the maximum values of S increase in going from the Pt atom to the Zn atom and then decrease for the Cd atom. Furthermore, the Wiedemann–Franz law which states that the ratio of thermal to electrical conductivity for metals is constant is well verified in this work. The electric conductivity values are almost invariant with the temperature except for the case of MgNNi{sub 3} and AgNNi{sub 3} compounds in which it increases with T slightly. So, the superconducting materials based on silver and zinc are the best for the thermoelectric applications at room temperature due to the very important value of the factor of merit and the Seebeck coefficient obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cryochemical synthesis and antibacterial activity of hybrid nanocomposites based on dioxidine containing Ag and Cu nanoparticles incorporated in biopolymer cryostructurates

Cryochemical synthesis of hybrid nanocomposites based on the antibacterial drug, dioxidine, and metals (Ag, Cu) was performed. According to the data of H{sup 1} NMR, UV, and IR spectroscopy, low-temperature argon sorption, and transmission electron microscopy, met-als in these systems exist as Ag nanoparticles (with dimensions of 2—30 nm) or Cu nanoparti-cles (10—40 nm) involved in the bigger-sized particles of dioxidine with dimensions of 50—350 nm. These hybrid nanocomposites show the enhanced antibacterial activity towards the microbial cells Escherichia coli 52, Staphylococcus aureus 144, Mycobacterium cyaneum 98. The as-prepared drug nanocomposites are incorporated into spongy alginate cryostructurates. The feasibility of drug release from the biopolymer alginate carrier is proved and the related antibacterial activity is demonstrated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Binding of gold(III) with silver(I) dipropyldithiocarbamate: supramolecular self-assembly (role of secondary Au…S and Ag…S bonds) and thermal behavior of the ionic-polymer complex ([Au(S{sub 2}CNPr{sub 2}){sub 2}][AgCl{sub 2}]){sub n}

The double ionic-polymer complex ([Au(S{sub 2}CNPr{sub 2}){sub 2}][AgCl{sub 2}]){sub n} (1) was prepared as an individual fixation form of gold(III) from NaCl solutions with silver(I) dipropyldithiocarbamate and was characterized by single-crystal X-ray diffraction and {sup 13}C magic-angle spinning (MAS) NMR spectroscopy. The structure of 1 comprises two nonequivalent centrosymmetric complex cations [Au(S{sub 2}CNPr{sub 2}){sub 2}]{sup +} (A and B) and the discrete linear anion [AgCl{sub 2}]{sup –}. Gold(III) cations are linked by pairs of unsymmetrical secondary Au…S bonds to form linear supramolecular chains (…A…B…)n. Neighboring cations are additionally linked by [AgCl{sub 2}]{sup –} anions via secondary Ag…S and Cl…S bonds, the anions being involved in the overall stabilization of the supramolecular structure. The cation–anion interactions lead to a distortion of the linear configuration of the [AgCl{sub 2}]{sup –} anion. The character of thermolysis of 1 accompanied by quantitative regeneration of bound Au and Ag was established by simultaneous thermal analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Sn-Ag-Cu-X Solders for Electronic Assembly by Micro-Alloying with Al

Of Pb-free solder choices, an array of solder alloys based on the Sn-Ag-Cu (SAC) ternary eutectic (T eut = 217°C) composition have emerged with potential for broad use, including ball grid array (BGA) joints that cool slowly. This work investigated minor substitutional additions of Al (<0.25 wt.%) to Sn-3.5Ag-0.95Cu (SAC3595) solders to promote more consistent solder joint microstructures and to avoid deleterious product phases, e.g., Ag3Sn “blades,” for BGA cooling rates, since such Al additions to SAC had already demonstrated excellent thermal aging stability. Consistent with past work, blade formation was suppressed for increased Al content (>0.05Al), but the suppression effect faded for >0.20Al. Undercooling suppression did not correlate specifically with blade suppression since it became significant at 0.10Al and increased continuously with greater Al to 0.25Al. Surprisingly, an intermediate range of Al content (0.10 wt.% to 0.20 wt.% Al) promoted formation of significant populations of 2-μm to 5-μm faceted Cu-Al particles, identified as Cu33Al17, that clustered at the top of the solder joint matrix and exhibited extraordinary hardness. Clustering of Cu33Al17 was attributed to its buoyancy, from a lower density than Sn liquid, and its early position in the nucleation sequence within the solder matrix, permitting unrestricted migration to the top interface. Joint microstructures and implications for the full nucleation sequence for these SAC + Al solder joints are discussed, along with possible benefits from the clustered particles for improved thermal cycling resistance.

36 MATERIALS SCIENCE↗

Microstructure and Sn crystal orientation evolution in Sn-3.5Ag lead-free solders in high temperature packaging applications

Understanding the reliability of eutectic Sn-3.5Ag lead-free solders in high temperature packaging applications is of significant interest in power electronics for the next generation electric grid. Large area (2.5mm 2.5mm) Sn-3.5Ag solder joints between silicon dies and direct bonded copper substrates were thermally cycled between 5 C and 200 C. Sn crystal orientation and microstructure evolution during thermal cycling were characterized by electron backscatter diffraction (EBSD) in scanning electron microscope (SEM). Comparisons are made between observed initial texture and microstructure and its evolution during thermal cycling. Gradual lattice rotation and grain boundary misorientation evolution suggested the continuous recrystallization mechanism. Recrystallization behavior was correlated with dislocation slip activities.

high temperature packaging↗

Effect of Chemical Composition on the Microstructure and Properties of the Ag-Ga-Ge Alloys

This study presents a comparison of thermodynamically calculated phase compositions of Ag-Ga-Ge alloys at fixed temperatures with phase analysis results of alloys annealed at respective temperatures. Three isothermal sections of the Ag-Ga-Ge system at 25, 100 and 300 °C have been extrapolated using optimized thermodynamic parameters from the literature. An experimental analysis of the microstructure was carried out using optical microscopy, scanning electron microscopy and energy-dispersive spectrometry. Results obtained by x-ray powder diffraction methods (identified phases and lattice parameters) were compared with the results of the predicted phase equilibria. Good overall agreement between experimental and calculated values was obtained. The Brinell hardness and electrical conductivity of selected alloys were measured and obtained results were analyzed with respect to their overall compositions and phase constituents.

36 MATERIALS SCIENCE↗

A Time-Dependent Density Functional Theory Study of the Impact of Ligand Passivation on the Plasmonic Behavior of Ag Nanoclusters

We present a detailed study of the impact of ligand passivation on the electronic structures and optical properties of plasmonic Ag nanoclusters using density functional theory (DFT) and time-dependent density functional theory (TD-DFT). The clusters studied are A g 13 5 + , A g 25 S H 18 - , A g 25 N H 2 18 - , A g 32 14 + , and A g 44 S H 30 4 - . We find that the highest occupied ligand orbitals from S (3p) and N (2p) appear just above the conduction band, and this leads to significant ligand-to-metal charge transfer transitions at high energies. Dielectric screening associated with ligand passivation results in reduced HOMO–LUMO gaps and in an increased gap between the HOMO and the valence band associated with the Ag 4d orbitals. Ligand field effects result in splitting of plasmonic peaks, leading to reduced mixing between nearby single-particle excitations. The magnitude of these effects is found to decrease when thiolate ligands are replaced with amine ligands. We also find that, in the case of the A g 44 S H 30 4 - cluster, the ligands localize plasmonic excitations into the core of the cluster.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Co-aromatization of olefin and methane over Ag-Ga/ZSM-5 catalyst at low temperature

The massive exploitation of shale gas in the past decade has boosted the production of natural gas and reduced its price dramatically. The methane activation and following conversion into more valuable fuels and chemicals have thus become more and more attractive, while the introduction of hydrocarbons to enhance the methane activation at mild conditions represents a promising approach. In the present work, the co-aromatization of methane with propylene has been studied at 400 °C. The presence of methane would increase the toluene to benzene ratio as well as the average carbon number of the formed liquid aromatic products compared to its propylene alone counterpart. Among the gas products, the formations of C 3 H 8 , C 4 H 8 and C 4 H 10 also get promoted when methane is present. The incorporation of methane into the product molecules is also directly evidenced by the 1 H, 2 D and 13 C NMR spectroscopy of the liquid products obtained from the reaction between propylene (or styrene) and isotope labelled methane. Hydrogen from methane would contribute a large portion of the hydrogen in the product molecules, while the benzylic and aromatic hydrogen sites are favored compared with those on the alkyl side chains. The activation of methane is also observed in the DRIFT spectra when deuterium enriched methane is engaged as the methane source and evidenced by the escalated exothermic feature when olefin aromatization takes place under methane environment. The excellent catalytic performance of Ag-Ga/ZSM-5 might be because of the better dispersion of Ag and Ga on the ZSM-5 surface and moderate amount of strong Brosted and Lewis surface acid sites. All the observations suggest that methane might be activated nonoxidatively and converted into aromatics if suitable catalyst is charged under the assistance of co-existing olefin. In conclusion, the reported synergetic effect could potentially lead to the more economic utilization of abundant natural gas and petrochemical intermediates.

09 BIOMASS FUELS↗

Product-promoted acetylene cyclotrimerization to benzene on Ag(111)

Acetylene cyclotrimerization to benzene on Ag(111) has recently been found to be 100% selective. However, it requires monolayer coverages, limiting its practical application due to the high pressure required to attain this surface coverage of acetylene near room temperature. Here, we show that co-adsorbed benzene, the reaction product, promotes cyclotrimerization at submonolayer acetylene coverages without compromising the 100% selectivity of Ag(111) via temperature-programmed desorption experiments. Scanning tunneling microscopy and density functional theory (DFT) calculations elucidate the origin of this effect whereby attractive acetylene–benzene interactions locally compress acetylene domains. DFT calculations further illustrate how co-adsorbed benzene reduces the transition-state energy for formation of the key C 4 intermediate, making cyclotrimerization competitive with desorption. Together, these findings reveal how product-reactant interactions can enhance C–C coupling.

Acetylene cyclotrimerization↗

Effects of Ag and Zr solutes on dislocation emission from Σ11(332)[110] symmetric tilt grain boundaries in Cu: Bigger is not always better

Solute additions are commonly used to stabilize nanocrystalline materials against grain growth, and can simultaneously enhance the strength of the material by impeding dislocation emission from the grain boundaries. In this study we demonstrate using molecular dynamics (MD) simulations that the effect of solutes on dislocation nucleation depends on the distribution of solutes at the grain boundary, and can vary dramatically depending on the solute type. Solutes with a smaller positive size mismatch to the host can be more effective in suppressing dislocation emission from grain boundaries than others that have larger mismatch. In particular, although Ag solutes have a smaller misfit with Cu than Zr solutes, the effect of Ag on the dislocation nucleation from grain boundaries in Cu can be larger than the corresponding effect of Zr. Furthermore, these findings are relevant to the search for optimal solute additions, which can strengthen a nanocrytalline material by suppressing the nucleation of dislocation slip from grain boundaries, while stabilizing it against grain growth.

36 MATERIALS SCIENCE↗

Observations of Ag diffusion in ion implanted SiC

The nature and magnitude of Ag diffusion in SiC has been a topic of interest in connection with the performance of tristructural isotropic (TRISO) coated particle fuel for high temperature gas-cooled nuclear reactors. Ion implantation diffusion couples have been revisited to continue developing a more complete understanding of Ag fission product diffusion in SiC. Ion implantation diffusion couples fabricated from single crystal 4H-SiC and polycrystalline 3C-SiC substrates and exposed to 1500–1625°C, were investigated in this study by transmission electron microscopy and secondary ion mass spectrometry (SIMS). The high dynamic range of SIMS allowed for multiple diffusion régimes to be investigated, including enhanced diffusion by implantation-induced defects and grain boundary (GB) diffusion in undamaged SiC. Lastly, estimated diffusion coefficients suggest GB diffusion in bulk SiC does not properly describe the release observed from TRISO fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Crystal chemistry in the Ag{sub 2}O-Nb{sub 2}O{sub 5} system

The investigation of the AgNbO{sub 3}-Nb{sub 2}O{sub 5} system is carried out using solid-state routes. This investigation allows to confirm the existence of four compounds with structure related to the Na-based homologous. A new form of AgNb{sub 3}O{sub 8} is evidenced and its structure is determined on the basis of single-crystal X-ray diffraction investigations. This compound crystallizes in the orthorhombic system (SG Pbam) with cell parameters a=12.453(4) A; b=12.416(1) A; c=3.9700(4) A. It presents a TTB type host network in which triangular tunnels remain empty, square ones are fully filled with Ag{sup +} and pentagonal ones show mixed occupancy with Ag{sup +} and [NbO]{sup 3+} entities. Crystal-chemistry investigations show that despite a complex and more or less disordered structure, no evidence for solid solution domain is observed. - Graphical abstract: The investigation via conventional solid-state route allows to settle the different compounds of the AgNbO{sub 3}-Nb{sub 2}O{sub 5} system. The structure of a new form of AgNb{sub 3}O{sub 8} is detailed. It is related to the TTB type network with a specific mixed Ag/Nb occupancy of pentagonal tunnel driving to possible but not observed ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗