Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Vapor‐ and liquid‐phase adsorption of alcohol and water in silicalite‐1 synthesized in fluoride media

Abstract In this work, batch‐adsorption experiments and molecular simulations are employed to probe the adsorption of binary mixtures containing ethanol or a linear alkane‐1, n ‐diol solvated in water or ethanol onto silicalite‐1. Since the batch‐adsorption experiments require an additional relationship to determine the amount of solute (and solvent) adsorbed, as only the bulk liquid reservoir can be probed directly, molecular simulations are used to provide a relationship between solute and solvent adsorption for input to the experimental bulk measurements. The combination of bulk experimental measurements and simulated solute–solvent relationship yields solvent and solute loadings that are self‐consistent with simulation alone, and allow for an assessment of the various assumptions made in the literature. At low solution concentrations, the solute loading calculated is independent of the assumption made. At high concentrations, a negligent choice of assumption can lead to systematic overestimation or underestimation of calculated solute loading.

DeJaco, Robert F.↗

Molecular Origin of the Selectivity Differences between Palladium and Gold-Palladium in Benzyl Alcohol Oxidation: Different Oxygen Adsorption Properties

The same mechanism and microkinetic model used for benzyl alcohol oxidation over Pd/C was shown to apply to benzyl alcohol oxidation over AuPd/C. Almost all of the selectivity differences could be explained by a decrease in oxygen adsorption on AuPd. After isolating oxygen adsorption as being the origin of the selectivity differences, density functional theory was used to investigate the oxygen adsorption properties of a pure Pd surface, a pure Au surface, and an alloyed AuPd surface. Finally, the calculations showed that Au–Pd alloying decreased the oxygen adsorption properties relative to pure Pd, which explained the selectivity differences, consistent with the microkinetic modeling.

36 MATERIALS SCIENCE↗

2D Ising Model for Adsorption–induced Enantiopurification of Racemates

Mechanisms for the spontaneous transformation of achiral chemical systems into states of enantiomeric purity have important ramifications in modern pharmacology and potential relevance to the origins of homochirality in life on Earth. Such mechanisms for enantiopurification are needed for production of chiral pharmaceuticals and other bioactive compounds. Previously proposed chemical mechanisms leading from achiral systems to near homochirality are initiated by a symmetry–breaking step resulting in a minor excess of one enantiomer via statistical fluctuations in enantiomer concentrations. Subsequent irreversible processes then amplify the majority enantiomer concentration while simultaneously suppressing minority enantiomer production. Herein, equilibrium adsorption of amino acid enantiomer mixtures onto chiral and achiral surfaces reveals amplification of surface enantiomeric excess relative to the gas phase; i. e. enantiopurification of chiral adsorbates by adsorption. Furthermore, this adsorption–induced amplification of enantiomeric excess is shown to be well–describe by the 2D Ising model. More importantly, the 2D–Ising model predicts formation of homochiral monolayers from adsorption of racemic mixtures or prochiral molecules on achiral surfaces; i.e. enantiopurification with no apparent chiral driving force.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High‐efficiency adsorption of various heavy metals by tea residue biochar loaded with nanoscale zero‐valent iron

Abstract Nanoscale zero‐valent iron (nZVI) loaded on tea residue biochar activated with phosphoric acid composites was synthesized. This adsorbent can efficiently adsorb multiple heavy metal ions such as Pb (II), Cr (III), Cu (II), and Ni (II) simultaneously. The adsorption process was found to follow the pseudo‐second‐order kinetic model. Equilibrium adsorption capacities reached 288.18, 162.34, 242.72, and 267.22 mg·g −1 for Pb(II), Cr(III), Cu(II), and Ni(II), respectively. The common interfering ions exhibited lower influence on its adsorption capacity. The adsorption mechanism includes reduction, ion exchange, surface complexation and precipitation. Furthermore, the waste adsorbent was converted into a catalyst in situ, which could catalyze the degradation of Congo red by establishing an electron transfer pathway. This research provides a new concept for the sustainable utilization of industrial tea residues and the harmless treatment of waste nZVI composite adsorbents.

Liu, Shuang↗

Adsorption of methylene blue by bismuth impregnated biochar of different biomass materials: pore structure and surface chemistry characteristics

Abstract In this study, three different types of biochar (biomass materials were beech wood, corncob, and bamboo) were loaded with bismuth to form bismuth impregnated biochars (named respectively as Bi@WBC, Bi@CBC, and Bi@BBC) to investigate their properties (pore structure and surface chemistry characteristics) on methylene blue (MB) removal capacities. Three bismuth impregnated biochars made from different biomass materials were ranked for their adsorption capacity of MB as follows: Bi@WBC > Bi@CBC > Bi@BBC, in which Bi@WBC showed the largest Langmuir adsorption capacity of 178.59 mg g −1 . While the specific surface area (SSA) and pore volume of Bi@WBC were the largest (accounting for 477.74 m 2 g −1 and 0.15 cm 3 g −1 , respectively), according to the FTIR and XPS results, Bi@WBC (72.3%) exhibited a higher proportion of BiO bonds than the Bi@CBC (52.3%) and Bi@BBC (48.4%) did. Conclusively, the rich porous structure and surface functional groups of Bi@WBC affected the adsorption capacity of MB, and the chemical adsorption provided the main contribution. © 2022 Society of Chemical Industry (SCI).

Li, Peiyi↗

A Review on Adsorption Technologies for Mercury Emission Control

This study summarized existing adsorption technologies for the removal of elemental mercury in the flue gas. Both carriers (e.g., active carbon (AC), pyrolyzed char, inorganic adsorbents and fly ash) and various modification methods (pore structure improvement, oxygen-containing functional groups addition and new active reagents impregnation) were compared to shed light on the development of future adsorption technology. AC and char possibly performed more mercury adsorption capacity (MAC) compared with fly ash and inorganic adsorbents since carbon atom existence was easier to form the active halogen groups (C–X) and oxygen containing groups. Though both pore structure improvement and chemical group formation improved the MAC of adsorbents, the chemical modification methods (oxygen-containing functional groups addition and new active reagents impregnation) were more effective. The impregnation of halogen, sulfur and metal chloride could distinctly form lots of active sites on the adsorbents and developed high effective mercury adsorbents. In the future, the adsorption researches possibly focus on SO{sub 2} and H{sub 2}O resistance of adsorbents, separable adsorbents, low-cost chemical modification methods, and utilization potential of fly ash.

54 ENVIRONMENTAL SCIENCES↗

A reference high-pressure CH4 adsorption isotherm for zeolite Y: results of an interlaboratory study

Abstract This paper reports the results of an international interlaboratory study led by the National Institute of Standards and Technology (NIST) on the measurement of high-pressure surface excess methane adsorption isotherms on NIST Reference Material RM 8850 (Zeolite Y), at 25 °C up to 7.5 MPa. Twenty laboratories participated in the study and contributed over one-hundred adsorption isotherms of methane on Zeolite Y. From these data, an empirical reference equation was determined, along with a 95% uncertainty interval ( U k =2 ). By requiring participants to replicate a high-pressure reference isotherm for carbon dioxide adsorption on NIST Reference Material RM 8852 (ZSM-5), this interlaboratory study also demonstrated the usefulness of reference isotherms in evaluating the performance of high-pressure adsorption experiments.

Nguyen, H. G. T. (ORCID:0000000210527565)↗

Modelling and Optimization of Uranium (VI) Ions Adsorption Onto Nano-ZnO/Chitosan Bio-composite Beads with Response Surface Methodology (RSM)

Nano-ZnO-chitosan bio-composite beads were prepared for the sorption of UO{sub 2}{sup 2+} from aqueous media. The resulting nano-ZnO/CTS bio-composite beads were characterized by TEM, XRD etc. The sorption of UO{sub 2}{sup 2+} by bio-composite beads was optimized using RSM. The correlation between four variables was modelled and studied. According to RSM data, correlation coefficients (R{sup 2} = 0.99) and probability F-values (F = 2.24 × 10{sup − 10}) show that the model fits the experimental data well. Adsorption capacity for nano-ZnO/CTS bio-composite beads was obtained at 148.7 mg/g under optimum conditions. The results indicate that nano-ZnO/CTS bio-composite beads are appropriate for the adsorption of UO{sub 2}{sup 2+} ions from aqueous media. Also, the suitability of adsorption values to adsorption isotherms was researched and thermodynamic data were calculated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adsorption of Ammonium by Graphene Oxide-Based Composites Prepared by UV Irradiation and Using as Slow-Release Fertilizer

A novel sodium alginate-grafted poly(acrylic acid)/graphene oxide (NaAlg-g-PAA/GO) composite hydrogel was prepared via ultraviolet irradiation, and characterized by infrared spectroscopy spectrometer. X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. It was employed to adsorb NH{sub 4}{sup +} from aqueous solution and used as slow-release nitrogen fertilizers (SNFs). Result indicated that the adsorption process for NH{sub 4}{sup +} reached equilibrium within 50 min, with the adsorption capacity of 6.6 mmol g{sup −1} even if 30 wt% GO was incorporated. The results of adsorption kinetic and isotherm were well described by the pseudo-second-order and Freundlich model. The thermodynamics analysis showed the adsorption process was spontaneous. The study indicated excellent water-holding ratio of soil with 2 wt% SNFs was 81.2%, and nitrogen release was up to 55.1% within 40 days in soil. Overall, NaAlg-g-PAA/GO could be considered as an efficient adsorbent for the recovery of nitrogen with the agronomic reuse as a fertilizer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, Characterization and Experimental Studies of Nano Zn–Al–Fe{sub 3}O{sub 4} Blended Alginate/Ca Beads for the Adsorption of Rhodamin B

In the present study, adsorptive removal of rhodamin-B (RMN-B) from aqueous solution was investigated by using nano Zn–Al–Fe{sub 3}O{sub 4} incorporated sodium alginate (SA) beads. SA is a natural polysaccharide, non toxic and biodegradable material. The incorporation of Zn–Al–Fe{sub 3}O{sub 4} into SA was done by ionic polymerization method using CaCl{sub 2}. A batch mode study was used for the adsorption of RMN-B onto Zn–Al–Fe{sub 3}O{sub 4}/ alginate beads. The adsorption efficiency of RMN-B was investigated by the following modeling equations like Freundlich, Langmuir, Pseudo-first order, Pseudo-second order, Intraparticle diffusion, Gibbs free energy, Enthalpy and Entropy. The predicted experimental results of various modeling equations were implied that the process follow Langmuir and pseudo-second order equations. The intraparticle diffusion parameters indicate that the diffusion between RMN-B and nano beads were predominant in throughout of process. The surface morphology of nano beads of before and after adsorption were show that RMN-B is strongly adhered on whole surface of the nano material. The FTIR spectrum indicates that the RMN-B strongly adsorbed on the surface and TGA study reveals that the alginate/Zn–Al–Fe{sub 3}O{sub 4}/Ca material has an excellent temperature withstand capacity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Amine Functionalized Electrospun Cellulose Nanofibers for Fluoride Adsorption from Drinking Water

In this study, we synthesized amine functionalized cellulose nanofiber based adsorbent for effective removal of dissolved fluoride ions from groundwater samples. Cellulose acetate was electrospun into nanofibers followed by deacetylation to yield cellulose nanofibers which were then treated with ethylenediamine to prepare amine functionalized cellulose fabric to be used as an adsorbent. As- synthesized adsorbent was first characterized by scanning electron microscopy and Fourier transform infrared spectroscopy for physiochemical characteristics. Fluoride adsorption studies were then carried out under batch mode to study the influence of various parameters on adsorption process. Amine functionalized cellulose nanofibrous mat was found to be effective with high adsorption efficiency for removal of fluoride ions from aqueous solution, even at low fluoride concentrations (< 5 mg L{sup −1}). Adsorption mechanism of fluoride onto prepared cellulose nanofibers based adsorbent was explained from the studies of isotherms, kinetic and thermodynamic parameters. Field studies conducted using this amine functionalized cellulose nanofibrous mat revealed the suitability and effectiveness of adsorbent for fluoride removal from contaminated groundwater.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

SO2 Adsorption on CeO2(100) and CeO2(111)

The adsorption and reaction of sulfur dioxide, SO2, was studied on oxidized and reduced CeOX(100) and compared to previous results on CeOX(111). SO2 adsorbs on oxidized CeO2(100) as sulfite, SO32-, at 200 K and sulfite is the only adsorbate observed on the surface at any temperature. The sulfite desorbs monotonically from 200 to 700 K. The adsorption and desorption of SO2 does not result in any change in the Ce4+ oxidation state. SO2 also adsorbs as sulfite on reduced CeO1.7(100) at 200 K. There is also a small amount of elemental sulfur, S0, formed. As the sample is heated the sulfite decomposes into sulfide, S2-. Roughly 25 % of the adsorbed S either desorbs or diffuses into the bulk of the reduced ceria. The decomposition, and resulting formation of S2- and O2-, re-oxidize some of the Ce3+ to Ce4+. Unlike what has been observed following the adsorption and reaction of many other molecules, the adsorption and reaction of SO2 is virtually identical on CeOX(100) and CeOX(111).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature effects on adsorption and capillarity water retention mechanisms in constrained unsaturated soils

Abstract This paper focuses on the impact of elevated temperatures on the adsorptive and capillarity water retention mechanisms of unsaturated soils under constrained (constant volume) conditions. This topic is critical for simulating the thermo-hydraulic behavior of soils in hydrogeological or geotechnical applications, including climate change effects on near surface soils, energy piles or soil borehole thermal energy storage systems in unsaturated soil layers, and buffers for geological nuclear waste repositories. A nonisothermal soil water retention curve (SWRC) that separately considers the temperature-dependency of the key parameters governing adsorptive and capillarity water retention mechanisms and soil physical parameters (e.g., surface tension, contact angle, adsorption capacity, cation exchange capacity, mean cavitation suction, air entry value and equilibrium film thickness) was developed to provide insights into the impact of temperature on water retention over the full suction range. The nonisothermal SWRC was validated using experimental data on high plasticity clays, with a good prediction of temperature effects on adsorption and capillarity water retention mechanisms in constrained unsaturated soils.

Lu, Yu↗

Adsorption and Surface Diffusion of Metals on α-Al2O3 for Advanced Manufacturing Applications

Abstract The adsorption and diffusion of Mo and Nb adatoms on the $$\alpha$$ α -Al 2 O 3 (0001) surface were explored using density functional theory-based methods. Adsorption energies of Mo and Nb adatoms at minima sites on the surface were determined. Mo and Nb adatoms prefer to adsorb to the same locations on the surface, and larger adsorption energies calculated for Nb compared to Mo indicate that Nb adatom-surface interactions are stronger than Mo. Using minima adsorption sites as initial and final locations for surface diffusion, energy barriers for diffusion were calculated using the nudged elastic band method. Overall, Mo and Nb follow roughly the same diffusion paths. The diffusion pre-factors for Mo and Nb are similar; however, Mo diffusion has a lower energy barrier and thus a larger diffusion coefficient compared with Nb. These results provide insight into the role of surface diffusion of Mo and Nb adatoms during advanced manufacturing processes.

Biaggne, Austin (ORCID:0000000328074960)↗

Determining the hydration energetics on carbon-supported Ru catalysts: An adsorption calorimetry and density functional theory study

Fundamental knowledge on the energetics at the interface between a water layer and a metal catalyst is essential so as to understand the roles that water can play in the synthesis, activation and regeneration of noble metal-based catalysts. Here, we report the direct measurement of the enthalpy of water adsorption (Δh ads ) on activated carbon (C) and activated C-supported Ru nanoparticles, which are promising catalyst as applied to the hydrogenation/hydrodeoxygenation (HDO) of oxygenates (phenolics, aldehydes, etc.). Specifically, the near-zero coverage enthalpy of water adsorption on a C-supported Ru catalyst is -75.3 ± 0.4 kJ/(mol water), suggesting favorable water–metal binding. This is much more exothermic than that on C, which has an enthalpy of adsorption of -50.3 ± 1.3 kJ/(mol water). Despite the favorable initial binding, the magnitudes of enthalpies of water condensation on C and Ru-C indicate that overall, their surfaces are both hydrophobic. Moreover, the experimentally-measured near-zero coverage water adsorption enthalpy at the Ru sites is in very good agreement with our density functional theory based calculations. At low coverages, we obtain a water binding energy of -61.7 kJ/(mol water), which increases to -78.1 kJ/(mol water) at saturation. Complementary results are also obtained from a thermal analysis, which employed a thermogravimetric analysis–differential scanning calorimetry–mass spectrometry (TG-DSC-MS), a spectroscopic investigation using ex situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and a morphological evaluation with transmission electron microscopy (TEM). We point out that in carbon-supported metal catalysts, such as Ru-C, a strong hydration at near-zero coverage and relative weak water-surface interactions occurs upon saturation. Such heterogeneity is essential and crucial for catalytic hydrogenation/HDO reactions that involve balanced interactions among the water-rich reactant mixture and nonpolar organic products.

09 BIOMASS FUELS↗

New Method for Evaluating Irreversible Adsorption and Stationary Phase Bleed in Gas Chromatographic Capillary Columns

A novel method for the evaluation of gas chromatographic (GC) column inertness has been developed using a tandem GC approach. Typically column inertness is measured by analyte peak shape evaluation. In general, silica, glass, and metal surfaces are chemically reactive and can cause analyte adsorption, which typically is observed as chromatographic peak tailing. Adsorption processes produce broad, short chromatographic peaks that confound peak area determinations because a significant portion can reside in the noise. In addition, chromatographic surfaces and stationary phases can irreversibly adsorb certain analytes without obvious degradation of peak shape. The inertness measurements described in this work specifically determine the degree of irreversible adsorption behavior of specific target compounds at levels ranging from approximately 50 picograms to 1 nanogram on selected gas chromatographic columns. Chromatographic columns with 5% phenylmethylsiloxane, polyethylene glycol (wax), trifluoropropylsiloxane, and 78% cyanopropylsiloxane stationary phases were evaluated with a variety of phosphorus- and sulfur- containing compounds selected as test compounds due to their ease of adsorption and importance in trace analytical detection. In addition, the method was shown effective for characterizing column bleed.

bleed↗

Adsorption and intracellular uptake of mercuric mercury and methylmercury by methanotrophs and methylating bacteria

The cell surface adsorption and intracellular uptake of mercuric mercury Hg(II) and methylmercury (MeHg) are important in determining the fate and transformation of Hg in the environment. However, current information is limited about their interactions with two important groups of microorganisms, i.e., methanotrophs and Hg(II)-methylating bacteria, in aquatic systems. This study investigated the adsorption and uptake dynamics of Hg(II) and MeHg by three strains of methanotrophs, Methylomonas sp. strain EFPC3, Methylosinus trichosporium OB3b, and Methylococcus capsulatus Bath, and two Hg(II)-methylating bacteria, Pseudodesulfovibrio mercurii ND132 and Geobacter sulfurreducens PCA. Distinctive behaviors of these microorganisms towards Hg(II) and MeHg adsorption and intracellular uptake were observed. The methanotrophs took up 55–80% of inorganic Hg(II) inside cells after 24 h incubation, lower than methylating bacteria (>90%). Approximately 80–95% of MeHg was rapidly taken up by all the tested methanotrophs within 24 h. In contrast, after the same time, G. sulfurreducens PCA adsorbed 70% but took up <20% of MeHg, while P. mercurii ND132 adsorbed <20% but took up negligible amounts of MeHg. These results suggest that microbial surface adsorption and intracellular uptake of Hg(II) and MeHg depend on the specific types of microbes and appear to be related to microbial physiology that requires further detailed investigation. Despite being incapable of methylating Hg(II), methanotrophs play important roles in immobilizing both Hg(II) and MeHg, potentially influencing their bioavailability and trophic transfer. Furthermore, methanotrophs are not only important sinks for methane but also for Hg(II) and MeHg and can influence the global cycling of C and Hg.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular simulations of competitive adsorption of carbon dioxide – methane mixture on illitic clay surfaces

Molecular dynamics and Monte Carlo simulation studies were carried out here to investigate adsorption behavior of carbon dioxide and methane mixtures on illitic clay surfaces under dry conditions. Various compositions of the mixtures and distributions of isomorphic substitutions in clay layers were chosen to explore competitive adsorption depending on component concentration and charge localization. The simulations show that carbon dioxide is preferentially sorbed on the illitic surface and is capable to promote methane desorption. Density distributions of the molecular species in pore space reveal formation of multilayers on the clay surfaces at elevated pressures. Finally, mixed adsorption isotherms were compared with adsorption isotherms of pure compounds and thermodynamic quantities were reported to characterize the interaction of the carbon dioxide and methane with the clay surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗