Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “55”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Ab initio study on the electronic and mechanical properties of ReB and ReC

The structural, electronic, and mechanical properties of ReB and ReC have been studied by use of the density functional theory. For each compound, six structures are considered, i.e., hexagonal WC, NiAs, wurtzite, cubic NaCl, CsCl, and zinc-blende type structures. The results indicate that for ReB and ReC, WC type structure is energetically the most stable among the considered structures, followed by NiAs type structure. ReB-WC (i.e., ReB in WC type structure) and ReB-NiAs are both thermodynamically and mechanically stable. ReC-WC and ReC-NiAs are mechanically stable and becomes thermodynamically stable above 35 and 55 GPa, respectively. The estimated hardness from shear modulus is 34 GPa for ReB-WC, 28 GPa for ReB-NiAs, 35 GPa for ReC-WC and 37 GPa for ReC-NiAs, indicating that they are potential candidates to be ultra-incompressible and hard materials. - Graphical Abstract: The enthalpy-pressure diagram for ReC from the selected structures. ReC-WC and ReC-NiAs become thermodynamically stable above 35 and 55 GPa, respectively. ReC-WC is the most stable phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterisation of magnetic iron sulfide nanocrystals

Fe{sub 1-x}S and Fe{sub 3}S{sub 4} nanocrystals with a variety of morphologies and average sizes were synthesised by the reaction of iron(II) acetylacetonate (Fe(acac){sub 2}) and elemental sulfur in oleylamine. Reaction at 200 Degree-Sign C for 240 min produced extremely thin Fe{sub 3}S{sub 4} sheets, which displayed low coercivities (14 kA m{sup -1}) suggestive of pseudosingle-domain or multidomain particles. Reaction temperatures {>=}300 Degree-Sign C for 30 min produced 70 nm Fe{sub 1-x}S nanocrystals with hexagonal plate and hexagonal prism morphologies, which displayed high magnetic coercivities (110 kA m{sup -1}) characteristic of single magnetic domain particles. Rapid injection of sulfur solution at 280 Degree-Sign C followed by immediate cooling produced a mixture of Fe{sub 1-x}S nanocrystals and spherical, polydisperse {approx}5 nm Fe{sub 3}S{sub 4} nanocrystals, which displayed superparamagnetism above an average blocking temperature of 55 K. - Graphical abstract: Reaction of Fe(acac){sub 2} and sulfur in oleylamine produces Fe{sub 3}S{sub 4} nanocrystals at 200 Degree-Sign C and Fe{sub 1-x}S nanocrystals at 310 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer Synthesis of Fe{sub 1-x}S and Fe{sub 3}S{sub 4} nanocrystals from Fe(acac){sub 2} and sulfur. Black-Right-Pointing-Pointer Fe{sub 3}S{sub 4} sheets formed after 4 h at 200 Degree-Sign C. Black-Right-Pointing-Pointer Fe{sub 1-x}S nanocrystals formed above 200 Degree-Sign C. Black-Right-Pointing-Pointer Five nanometre Fe{sub 3}S{sub 4} formed by rapid injection. Black-Right-Pointing-Pointer Five nanometre Fe{sub 3}S{sub 4} nanocrystals superparamagnetic above blocking temperature of 55 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure and thermoelectric properties of clathrate, Ba{sub 8}Ni{sub 3.5}Si{sub 42.0}: Small cage volume and large disorder of the guest atom

Samples with the type-I clathrate composition Ba{sub 8}Ni{sub x}Si{sub 46-x} have been synthesized and their structure and thermoelectric properties characterized. Microprobe analysis indicates the Ni incorporation to be 2.62{<=}x{<=}3.53. The x=3.5 phase crystallizes in the type-I clathrate structure (space group: Pm-3n) with a lattice parameter of 10.2813(3) A. The refined composition was Ba{sub 8}Ni{sub 3.5}Si{sub 42.0}, with small vacancies, 0.4 and 0.5 atoms per formula unit, at the 2a and 6c sites, respectively. The position of the Ba2 atom in the large cage was modeled using a 4-fold split position (24j site), displaced 0.18 A from the cage center (6d site). The volume of the large cage is calculated to be 146 A{sup 3}, smaller than other clathrates with similar cation displacement. The sample shows n-type behavior with a maximum of -50 {mu}V/K at 823 K above which the Seebeck coefficient decreases, suggesting mixed carriers. Lattice thermal conductivity, {kappa}{sub l}, is 55 mW/K above 600 K. - Graphical abstract: Seebeck coefficient and resistivity of the type-I clathrate Ba{sub 8}Ni{sub 3.5}Si{sub 41.0}. Structure show's large displacement of the Ba cation in the large cage (6c site). Highlights: Black-Right-Pointing-Pointer Crystal structure of the Ba{sub 8}Ni{sub 3.5}Si{sub 41.0} reported. Black-Right-Pointing-Pointer Vacancies at the 2a and 6c sites. Black-Right-Pointing-Pointer Large disorder of Ba guest atom, 0.18 A from cage center. Black-Right-Pointing-Pointer Structure is compared to Ba{sub 8}Si{sub 46} and other type-I clathrates. Black-Right-Pointing-Pointer Max Seebeck of -50.7 {mu}V/C at 798.4 K, thermal conductivity {approx}55 mW/K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid-state thermal behavior and stability studies of theophylline-citric acid cocrystals prepared by neat cogrinding or thermal treatment

To investigate the thermal behavior of cocrystal formed between anhydrous theophylline (TP) and anhydrous citric acid (CA) by neat manual cogrinding or thermal treatment, DSC and FTIR microspectroscopy with curve-fitting analysis were applied. The physical mixture and 60-min ground mixture were stored at 55{+-}0.5 Degree-Sign C/40{+-}2% RH condition to determine their stability behavior. Typical TP-CA cocrystals were prepared by slow solvent evaporation method. Results indicate that the cogrinding process could gradually induce the cocrystal formation between TP and CA. The IR spectral peak shift from 3495 to 3512 cm{sup -1} and the stepwise appearance of several new IR peaks at 1731, 1712, 1676, 1651, 1557 and 1265 cm{sup -1} with cogrinding time suggest that the mechanism of TP-CA cocrystal formation was evidenced by interacting TP with CA through the intermolecular O-H{center_dot}{center_dot}{center_dot}O hydrogen bonding. The stability of 60-min ground mixture of TP-CA was confirmed at 55{+-}0.5 Degree-Sign C/40{+-}2% RH condition over a storage time of 60 days. - Garphical abstract: Cogrinding, thermal and solvent-evaporation methods might easily induce the theophylline-citric acid cocrystal formation. Highlights: Black-Right-Pointing-Pointer Cogrinding process could gradually induce the cocrystal formation between TP and CA. Black-Right-Pointing-Pointer The TP-CA cocrystal was formed through the intermolecular O-H{center_dot}{center_dot}{center_dot}O hydrogen bonding. Black-Right-Pointing-Pointer The 60-min TP-CA ground mixture was similar to the solvent-evaporated cocrystal. Black-Right-Pointing-Pointer The thermal-induced TP-CA cocrystal formation was confirmed by pre-heating the physical mixture to 152 Degree-Sign C. Black-Right-Pointing-Pointer The 60-min TP-CA ground mixture was stable at accelerated condition over a storage time of 60 days.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of ultra-fine grained aluminium tubes by RTES technique

Recently, repetitive tube expansion and shrinking have been exploited as a means for producing ultra-fine grained and nano-crystalline microstructures for magnesium alloy tubes. This method includes two different half-cycles and was based on pressing a tubular part through an angular channel die with two shear zones. Since the aluminium alloys are the most widely used materials in industries, in this study, repetitive tube expansion and shrinking as a new severe plastic deformation technique was applied to commercially pure aluminium for fabricating ultra-fine grained aluminium tubes for the first time and the ability of this process in significant grain refinement is determined even after single cycle. Transmission electron microscopy and X-ray diffraction were used to evaluate the microstructure of the repetitive tube expansion and shrinking processed materials and the examinations showed ultra-fine grains with the average grain size of 320 nm after one cycle of repetitive tube expansion and shrinking. The yield strength, ultimate tensile strength increased notably by the factor of 2.17 and 1.27 respectively, after one cycle of repetitive tube expansion and shrinking, whereas the elongation to failure as well as the uniform elongation decreased. Furthermore, micro-hardness distribution through the part's section proposed the hardness increasing to ~ 55 HV from the initial value of ~ 28 HV after one cycle of repetitive tube expansion and shrinking. - Highlights: • RTES was introduced for fabricating the UFGed AA1050 tubes for the first time. • Nano-grained AA1050 tube was obtained by RTES process. • Grain size of ~ 320 nm was obtained after two half-cycles of RTES process. • Yield and ultimate strength increased by the factor of 2.17 and 1.27 respectively. • The microhardness increased to ~ 55 HV from the initial value of ~ 28 HV.

36 MATERIALS SCIENCE↗

The growth of benzophenone crystals by Sankaranarayanan-Ramasamy (SR) method and slow evaporation solution technique (SEST): A comparative investigation

Highlights: Black-Right-Pointing-Pointer Benzophenone single crystal was grown by Sankaranarayanan-Ramasamy method which has the sizes of 1060 mm length and 55 mm diameter for the first time. Black-Right-Pointing-Pointer The conventional and SR-grown benzophenone crystals were characterized and compared using HRXRD, etching, laser damage threshold, microhardness, UV-transmittance, birefringence and dielectric analysis. Black-Right-Pointing-Pointer The SR-grown benzophenone crystal has higher LDT, microhardness, transparency, dielectric permittivity, birefringence and lower FWHM, EPD, dielectric loss than the crystal grown by conventional method. Black-Right-Pointing-Pointer The probable reason for higher crystalline perfection in SR-grown crystal was discussed. -- Abstract: Longest unidirectional Left-Pointing-Angle-Bracket 1 0 0 Right-Pointing-Angle-Bracket benzophenone (BP) crystal having dimension of 1060 mm length and 55 mm diameter was grown by Sankaranarayanan-Ramasamy method. The growth rate was measured by monitoring the elevation of the crystal-solution interface at different temperatures. The high resolution X-ray diffraction and etching measurements indicate that the unidirectional grown benzophenone crystal has good crystalline perfection and less density of defects. The optical damage threshold of SEST and SR grown BP crystals has been investigated and found that the SR grown benzophenone crystal has higher laser damage threshold value than the conventional method grown crystal. Microhardness measurement shows that crystals grown by SR method have a higher mechanical stability than the crystals grown by SEST method. Dielectric permittivity and birefringence are high in SR grown crystal compared to SEST grown BP crystal. The UV-vis-NIR results show that SR method grown crystal exhibits 7% higher transmittance as against crystals grown by conventional method.

36 MATERIALS SCIENCE↗

High energy storage properties of (Ni1/3Nb2/3)4+ complex-ion modified (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3 ceramics

Highlights: • BCZT-xNN ceramics showed single phase perovskite structure without an obvious second phase after adding NN, and exhibited both good temperature (−55 to 160 °C) and frequency (10{sup 2}–10{sup 7} Hz) stability. • The highest energy storage density can reach 0.66 J/cm{sup 3} and the energy efficiency is 88.1% was achieved in x = 0.3. • The environmental friendly (lead-free) BCZT-xNN ceramics are good candidate for application in energy storage devices. • This paper also developes a new method to obtain high energy storage density and efficiency of ceramic capacitor, which aims to adjust the T{sub c} of ceramics far below room temperature. - Abstract: In this study, paraelectric ceramics, (Ba{sub 0.85}Ca{sub 0.15})(Zr{sub 0.10}Ti{sub 0.90}){sub 1-x}(Ni{sub 1/3}Nb{sub 2/3}){sub x}O{sub 3,} abbreviated as BCZT-xNN (with x = 0.1, 0.2, 0.3, 0.4) were prepared via a solid-state reaction method. By introducing a B-site complex-ion, (Ni{sub 1/3}Nb{sub 2/3}){sup 4+}, the Curie temperature of the ceramic could be reduced to below room temperature. The effects of this B-site (Ni{sub 1/3}Nb{sub 2/3}){sup 4+} complex-ion substitution on the phase structure, surface microstructure as well as the dielectric, ferroelectric, and energy storage properties of the ceramic were systematically investigated. After adding NN, BCZT-xNN shows a single phase perovskite structure without evidence of a second phase . In addition, we observed high stability with respect to both temperature (−55 to 160 °C) and frequency (10{sup 2}–10{sup 7} Hz). Doping with NN produces slim polarization-electric field hysteresis loops and enhanced energy storage properties, while the efficiency decreases. When x = 0.3, the highest energy storage density reached 0.66 J/cm{sup 3} for a high electric field (20 kV/mm), and the respective energy efficiency was 88.1%. These properties indicate that the environmental friendly BCZT-xNN ceramics are promising candidates for commercial energy storage devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unusual magnetodielectric effects in La2CuMnO6 induced by a dynamic crossover in dielectric relaxation at TC

Highlights: • Ferromagnetic short-range correlations above T{sub C} = 72 K and a sign reversal of magnetoresistance around T{sub C}. • Dielectric relaxation in La{sub 2}CuMnO{sub 6}, with a dynamic (Arrhenius to Arrhenius) crossover at T{sub C}. • An unusual trend in the magnetodielectric coupling around T{sub C}. • A large magnetodielectric coupling of 55% at 68 K for 4 kHz and 61% at 105 K for 285.8 kHz under a magnetic field of 5 kOe. • Both the magnetic ordering and the external magnetic field control the electric dipole relaxation in the material. - Abstract: A series of fixed frequency dielectric measurements shows dielectric relaxation in La{sub 2}CuMnO{sub 6}, with a dynamic (Arrhenius to Arrhenius) crossover at T{sub C}. The external magnetic field alters the relaxation parameters in the vicinity of crossover and induces an unusual trend in the magnetodielectric coupling around T{sub C}. A large magnetodielectric coupling of 55% (at 68 K, 4 kHz) and 61% (at 105 K, 285.8 kHz) under a small magnetic field of 5 kOe is discovered. Presence of ferromagnetic short-range correlations above T{sub C} and a sign reversal of magnetoresistance around T{sub C} are observed. Specific heat analysis revealed the presence of ferromagnetic, variable range hopping active charge localized state. The presence of ferromagnetic short-range correlations and the influence of a core-grain dominated magnetoresistance on the Maxwell-Wagner interfacial polarization are responsible for the observed large magnetodielectric effect. Both the magnetic ordering and external magnetic field control the electric dipole relaxation in the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low vacuum annealing of polymer at low temperatures towards direct and scalable growth of graphene

Highlights: • Low Temperature and pressure growth process. • Synthesis of transfer free single layer graphene in the absence of reducing gases. • Sandwich structure growth process. - Abstract: A transfer-free method is demonstrated for the synthesis of graphene flakes directly on insulating substrate (SiO{sub 2}/Si) by carbon decomposition and diffusion through a layer of nickel. The 100 nm nickel catalyst was deposited on the top of SiO{sub 2} (300 nm)/Si substrate. The sandwich structure was prepared wherein spin-coated polymer was used as a carbon source for the graphene formation. The carbon molecules decomposed and diffused into the nickel layer during annealing of sandwich structures in low vacuum (∼5 × 10{sup −1} Pa) at 600–750 °C for 10 min. When cooled to room temperature (25 °C), graphene is formed at the interface between Ni and SiO{sub 2}/Si, the nickel film was removed by chemical etching. The observed graphene on SiO{sub 2}/Si substrates is confirmed by optical microscopy, Raman spectroscopy and atomic force microscopy. The Raman spectroscopy mapping over a 55 × 55 μm{sup 2} area confirmed the good quality of graphene flakes obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Resolution Neutron Radiography and Tomography of Hydrided Zircaloy-4 Cladding Materials

Neutron radiography for hydrogen analysis was performed with several Zircaloy-4 cladding samples with controlled hydrogen concentrations up to 1100 ppm. Hydrogen charging was performed in a process tube that was heated to facilitate hydrogen absorption by the metal. A correlation between the hydrogen concentration in the hydrided tubes and the neutron intensity was established, by which hydrogen content can be determined precisely in a small area (55 m x 55 m). Radiography analysis was also performed to evaluate the heating rate and its correlation with the hydrogen distribution through hydrided materials. In addition to radiography analysis, tomography experiments were performed on Zircaloy-4 tube samples to study the local hydrogen distribution. Through tomography analysis a 3D reconstruction of the tube was evaluated in which an uneven hydrogen distribution in the circumferential direction can be observed.

hydride↗

Learning occupants’ indoor comfort temperature through a Bayesian inference approach for office buildings in United States

A carefully chosen indoor comfort temperature as the thermostat set-point is the key to optimizing building energy use and occupants’ comfort and well-being. ASHRAE Standard 55 or ISO Standard 7730 uses the PMV-PPD model or the adaptive comfort model that is based on small-sized or outdated sample data, which raises questions on whether and how ranges of occupant thermal comfort temperature should be revised using more recent larger-sized dataset. In this paper, a Bayesian inference approach has been used to derive new occupant comfort temperature ranges for U.S. office buildings using the ASHRAE Global Thermal Comfort Database. Bayesian inference can express uncertainty and incorporate prior knowledge. The comfort temperatures were found to be higher and less variable at cooling mode than at heating mode, and with significant overlapped variation ranges between the two modes. The comfort operative temperature of occupants varies between 21.9 and 25.4 °C for the cooling mode with a median of 23.7 °C, and between 20.5 and 24.9 °C for the heating mode with a median of 22.7 °C. These comfort temperature ranges are similar to the current ASHRAE standard 55 in the heating mode but 2–3 °C lower in the cooling mode. Finally, the results of this study could be adopted as more realistic thermostat set-points in building design, operation, control optimization, energy performance analysis, and policymaking.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Analysis of the origins of black carbon and carbon monoxide transported to Beijing, Tianjin, and Hebei in China

A novel back-trajectory approach was adopted to determine the origins of black carbon (BC) and carbon monoxide (CO) transported to Beijing, Tianjin and Hebei. Results showed that the transport efficiency was controlled mainly by mid-latitude westerlies in winter, the South Asian monsoon in summer and prevailing westerly and northwesterly winds in spring and autumn. Hebei was identified as the most important source region of both BC (respectively accounting for 55% and 49%) and CO (39% and 38%) transported to Beijing and Tianjin. Inner Mongolia contributed more to the effective emission intensity (EEI) in winter than in summer for both BC and CO transported to Beijing and Tianjin. Shandong was responsible for higher EEI in summer than in winter. The six provinces making the greatest contributions to BC transported to Hebei were Shandong (19%), Shanxi (19%), Inner Mongolia (17%), Beijing (11%), Henan (11%), and Tianjin (10%), whereas thosemaking the greatest contributions to CO transported to Hebei were Shandong (20%), Inner Mongolia (10%), Tianjin (9%), Henan (9%), Shanxi (9%), and Beijing (8%). In summary, Hebei, Inner Mongolia, Shandong, Tianjin and Shanxi were determined as the dominant source regions of not only BC but also CO transported to Beijing. Hebei, Shandong, Beijing, Inner Mongolia, Henan, Liaoning and Shanxi were relatively important source regions for Tianjin. Shandong, Shanxi, Inner Mongolia, Beijing, Henan, Tianjin, Liaoning, Jiangsu and Anhui were the main source regions for Hebei. Residential and industrial sectors were the dominant sectors for BC and CO transported to the receptors, respectively. These results are consistent with the results of previous studies. Finally, comparing the observed.BC/.CO ratiowith the enhancement ratio of the EEI of BCwith that of CO (Delta EEIBC/Delta EEICO) atMiyun site, we further confirmed that the EEI can be used to represent the amounts of BC and CO reaching receptors. (c) 2018 Published by Elsevier B.V.

black carbon↗

Paraoxonase-1 genetic polymorphisms and susceptibility to DNA damage in workers occupationally exposed to organophosphate pesticides

Human paraoxonase 1 (PON1) is a lipoprotein-associated enzyme involved in the detoxification of organophosphate pesticides (OPs) by hydrolyzing the bioactive oxons. Polymorphisms of the PON1 gene are responsible for variation in the expression and catalytic activity of PON1 enzyme. In the present study, we have determined (a) the prevalence of two common PON1 polymorphisms, (b) the activity of PON1 and acetylcholinesterase enzymes, and (c) the influence of PON1 genotypes and phenotypes variation on DNA damage in workers exposed to OPs. We examined 230 subjects including 115 workers exposed to OPs and an equal number of normal healthy controls. The results revealed that PON1 activity toward paraoxon (179.19 {+-} 39.36 vs. 241.52 {+-} 42.32 nmol/min/ml in controls) and phenylacetate (112.74 {+-} 17.37 vs. 134.28 {+-} 25.49 {mu}mol/min/ml in controls) was significantly lower in workers than in control subjects (p < 0.001). No significant difference was observed in the distribution of genotypes and allelic frequencies of PON1{sub 192}QR (Gln/Arg) and PON1{sub 55}LM (Leu/Met) in workers and control subjects (p > 0.05). The PON1 activity toward paraoxonase was found to be significantly higher in the R/R (Arg/Arg) genotypes than Q/R (Gln/Arg) and lowest in Q/Q (Gln/Gln) genotypes in both workers and control subjects (p < 0.001). For PON1{sub 55}LM (Leu/Met), PON1 activity toward paraoxonase was observed to be higher in individuals with L/L (Leu/Leu) genotypes and lowest in individuals with M/M (Met/Met) genotypes in both groups (p < 0.001). No influence of PON1 genotypes and phenotypes was seen on the activity of acetylcholinesterase and arylesterase. The DNA damage was observed to be significantly higher in workers than in control subjects (p < 0.05). Further, the individuals who showed least paraoxonase activity i.e., those with (Q/Q [Gln/Gln] and M/M [Met/Met]) genotypes showed significantly higher DNA damage compared to other isoforms in workers exposed to OPs (p < 0.05). The results indicate that the individuals with PON1 Q/Q and M/M genotypes are more susceptible toward genotoxicity. In conclusion, the study suggests wide variation in enzyme activities and DNA damage due to polymorphisms in PON1 gene, which might have an important role in the identification of individual risk factors in workers occupationally exposed to OPs.

60 APPLIED LIFE SCIENCES↗

Increasing the structural coverage of tuberculosis drug targets

High-resolution three-dimensional structures of essential Mycobacterium tuberculosis (Mtb) proteins provide templates for TB drug design, but are available for only a small fraction of the Mtb proteome. Here we evaluate an intra-genus “homolog-rescue” strategy to increase the structural information available for TB drug discovery by using mycobacterial homologs with conserved active sites. We found that of 179 potential TB drug targets selected for x-ray structure determination, only 16 yielded a crystal structure. By adding 1675 homologs from nine other mycobacterial species to the pipeline, structures representing an additional 52 otherwise intractable targets were solved. To determine whether these homolog structures would be useful surrogates in TB drug design, we compared the active sites of 106 pairs of Mtb and non-TB mycobacterial (NTM) enzyme homologs with experimentally determined structures, using three metrics of active site similarity, including superposition of continuous pharmacophoric property distributions. Pair-wise structural comparisons revealed that 19/22 pairs with >55% overall sequence identity had active site Cα RMSD <1 Å, >85% side chain identity, and ≥80% PS APF (similarity based on pharmacophoric properties) indicating highly conserved active site shape and chemistry. Applying these results to the 52 NTM structures described above, 41 shared >55% sequence identity with the Mtb target, thus increasing the effective structural coverage of the 179 Mtb targets over three-fold (from 9% to 32%). The utility of these structures in TB drug design can be tested by designing inhibitors using the homolog structure and assaying the cognate Mtb enzyme; a promising test case, Mtb cytidylate kinase, is described. The homolog-rescue strategy evaluated here for TB is also generalizable to drug targets for other diseases.

59 BASIC BIOLOGICAL SCIENCES↗

Fate of metals contained in waste electrical and electronic equipment in a municipal waste treatment process

Highlights: Black-Right-Pointing-Pointer The fate of 55 metals during shredding and separation of WEEE was investigated. Black-Right-Pointing-Pointer Most metals were mainly distributed to the small-grain fraction. Black-Right-Pointing-Pointer Much of metals in WEEE being treated as municipal waste in Japan end up in landfills. Black-Right-Pointing-Pointer Pre-sorting of small digital products reduces metals to be landfilled at some level. Black-Right-Pointing-Pointer Consideration of metal recovery from other middle-sized WEEE is still important. - Abstract: In Japan, waste electrical and electronic equipment (WEEE) that is not covered by the recycling laws are treated as municipal solid waste. A part of common metals are recovered during the treatment; however, other metals are rarely recovered and their destinations are not clear. This study investigated the distribution ratios and substance flows of 55 metals contained in WEEE during municipal waste treatment using shredding and separation techniques at a Japanese municipal waste treatment plant. The results revealed that more than half of Cu and most of Al contained in WEEE end up in landfills or dissipate under the current municipal waste treatment system. Among the other metals contained in WEEE, at least 70% of the mass was distributed to the small-grain fraction through the shredding and separation and is to be landfilled. Most kinds of metals were concentrated several fold in the small-grain fraction through the process and therefore the small-grain fraction may be a next target for recovery of metals in terms of both metal content and amount. Separate collection and pre-sorting of small digital products can work as effective way for reducing precious metals and less common metals to be landfilled to some extent; however, much of the total masses of those metals would still end up in landfills and it is also important to consider how to recover and utilize metals contained in other WEEE such as audio/video equipment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Pyrolysis of polyolefins for increasing the yield of monomers' recovery

Highlights: Black-Right-Pointing-Pointer Thermal and catalytic pyrolysis of mixed polyolefins in fluidized bed has been studied. Black-Right-Pointing-Pointer We tested applicability of a commercial Ziegler-Natta catalyst (Z-N: TiCl{sub 4}/MgCl{sub 2}). Black-Right-Pointing-Pointer The catalyst has a strong influence on product distribution, increasing gas fraction. Black-Right-Pointing-Pointer At 650 Degree-Sign C the monomer generation increased by 55% when the catalyst was used. Black-Right-Pointing-Pointer We showed the concept of treatment of mixed polyolefins without a need of separation. - Abstract: Pyrolysis of plastic waste is an alternative way of plastic recovery and could be a potential solution for the increasing stream of solid waste. The objective of this work was to increase the yield the gaseous olefins (monomers) as feedstock for polymerization process and to test the applicability of a commercial Ziegler-Natta (Z-N): TiCl{sub 4}/MgCl{sub 2} for cracking a mixture of polyolefins consisted of 46% wt. of low density polyethylene (LDPE), 30% wt. of high density polyethylene (HDPE) and 24% wt. of polypropylene (PP). Two sets of experiments have been carried out at 500 and 650 Degree-Sign C via catalytic pyrolysis (1% of Z-N catalyst) and at 650 and 730 Degree-Sign C via only-thermal pyrolysis. These experiments have been conducted in a lab-scale, fluidized quartz-bed reactor of a capacity of 1-3 kg/h at Hamburg University. The results revealed a strong influence of temperature and presence of catalyst on the product distribution. The ratios of gas/liquid/solid mass fractions via thermal pyrolysis were: 36.9/48.4/15.7% wt. and 42.4/44.7/13.9% wt. at 650 and 730 Degree-Sign C while via catalytic pyrolysis were: 6.5/89.0/4.5% wt. and 54.3/41.9/3.8% wt. at 500 and 650 Degree-Sign C, respectively. At 650 Degree-Sign C the monomer generation increased by 55% up to 23.6% wt. of total pyrolysis products distribution while the catalyst was added. Obtained yields of olefins were compared with the naphtha steam cracking process and other potentially attractive processes for feedstock generation. The concept of closed cycle material flow for polyolefins has been discussed, showing the potential benefits of feedstock recycling in a plastic waste management.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Fixation and partitioning of heavy metals in slag after incineration of sewage sludge

Highlights: Black-Right-Pointing-Pointer The contents and partitioning of HMs in slag of sludge incineration were examined. Black-Right-Pointing-Pointer The fixation rate decreases with residential time and finally keeps a constant. Black-Right-Pointing-Pointer Water mass fraction of 55% is optimal for the sediment for Ni, Mn, Zn, Cu and Cr. Black-Right-Pointing-Pointer Water mass fraction of 75% is optimal for the sediment for Pb. Black-Right-Pointing-Pointer We found higher temperature versus lower non-residual fraction except that of Pb. - Abstract: Fixation of heavy metals in the slag produced during incineration of sewage sludge will reduce emission of the metals to the atmosphere and make the incineration process more environmentally friendly. The effects of incineration conditions (incineration temperature 500-1100 Degree-Sign C, furnace residence time 0-60 min, mass fraction of water in the sludge 0-75%) on the fixation rates and species partitioning of Cd, Pb, Cr, Cu, Zn, Mn and Ni in slag were investigated. When the incineration temperature was increased from 500 to 1100 Degree-Sign C, the fixation rate of Cd decreased from 87% to 49%, while the fixation rates of Cu and Mn were stable. The maximum fixation rates for Pb and Zn and for Ni and Cr were reached at 900 and 1100 Degree-Sign C, respectively. The fixation rates of Cu, Ni, Cd, Cr and Zn decreased as the residence time increased. With a 20 min residence time, the fixation rates of Pb and Mn were low. The maximum fixation rates of Ni, Mn, Zn, Cu and Cr were achieved when the mass fraction of water in the sludge was 55%. The fixation rate of Cd decreased as the water mass fraction increased, while the fixation rate of Pb increased. Partitioning analysis of the metals contained in the slag showed that increasing the incineration temperature and residence time promoted complete oxidation of the metals. This reduced the non-residual fractions of the metals, which would lower the bioavailability of the metals. The mass fraction of water in the sludge had little effect on the partitioning of the metals. Correlation analysis indicated that the fixation rates of heavy metals in the sludge and the forms of heavy metals in the incinerator slag could be controlled by optimization of the incineration conditions. These results show how the bioavailability of the metals can be reduced for environmentally friendly disposal of the incinerator slag.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗