Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “well data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Time-Resolved Line Shapes of Single Quantum Emitters via Machine Learned Photon Correlations

Solid-state single-photon emitters (SPEs) are quantum light sources that combine atomlike optical properties with solid-state integration and fabrication capabilities. SPEs are hindered by spectral diffusion, where the emitter’s surrounding environment induces random energy fluctuations. Timescales of spectral diffusion span nanoseconds to minutes and require probing single emitters to remove ensemble averaging. Photon correlation Fourier spectroscopy (PCFS) can be used to measure time-resolved single emitter line shapes, but is hindered by poor signal-to-noise ratio in the measured correlation functions at early times due to low photon counts. Here, we develop a framework to simulate PCFS correlation functions directly from diffusing spectra that match well with experimental data for single colloidal quantum dots. We use these simulated datasets to train a deep ensemble autoencoder machine learning model that outputs accurate, noiseless, and probabilistic reconstructions of the noisy correlations. Using this model, we obtain reconstructed time-resolved single dot emission line shapes at timescales as low as 10 ns, which are otherwise completely obscured by noise. This enables PCFS to extract optical coherence times on the same timescales as Hong-Ou-Mandel two-photon interference, but with the advantage of providing spectral information in addition to estimates of photon indistinguishability. Further, our machine learning approach is broadly applicable to different photon correlation spectroscopy techniques and SPE systems, offering an enhanced tool for probing single emitter line shapes on previously inaccessible timescales.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

PvaPy streaming framework for real-time data processing

User facility upgrades, new measurement techniques, advances in data analysis algorithms as well as advances in detector capabilities result in an increasing amount of data collected at X-ray beamlines. Some of these data must be analyzed and reconstructed on demand to help execute experiments dynamically and modify them in real time. In turn, this requires a computing framework for real-time processing capable of moving data quickly from the detector to local or remote computing resources, processing data, and returning results to users. In this paper, we discuss the streaming framework built on top of PvaPy, a Python API for the EPICS pvAccess protocol. We describe the framework architecture and capabilities, and discuss scientific use cases and applications that benefit from streaming workflows implemented on top of this framework. We also illustrate the framework's performance in terms of achievable data-processing rates for various detector image sizes.

EPICS pvAccess↗
DOE OSTI2020

Real Time Data Analysis With the ATLAS Trigger at the LHC in Run-2

The trigger selection capabilities of the ATLAS detector have been significantly enhanced for the LHC Run- 2 in order to cope with the higher event rates and with the large number of simultaneous interactions (pile-up) per protonproton bunch crossing. A new hardware system, designed to analyse real time event-topologies at Level-1 came to full use in 2017. A hardware-based track reconstruction system, expected to be used real-time in 2018, is designed to provide track information to the high-level software trigger at its full input rate. The high-level trigger selections are largely relying on offline-like reconstruction techniques, and in some cases multivariate analysis methods. Despite the sudden change in LHC operations during the second half of 2017, which caused an increase in pile-up and therefore also in CPU usage of the trigger algorithms, the set of triggers (so called trigger menu) running online has undergone only minor modifications thanks to the robustness and redundancy of the trigger system, and the use of a levelling luminosity scheme in agreement with LHC and other experiments. Here, this presentation gives a brief yet comprehensive review of the real-time performance of the ATLAS trigger system in 2017. Considerations will be presented on the most relevant parameters of the trigger (efficiency to collect signal and output data rate) as well as details on some aspects of the algorithms which are run real-time on the High Level Trigger CPU farm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Progress on Understanding Rayleigh–Taylor Flow and Mixing Using Synergy Between Simulation, Modeling, and Experiment

Simultaneous advances in numerical methods and computing, theoretical techniques, and experimental diagnostics have all led independently to better understanding of Rayleigh–Taylor (RT) instability, turbulence, and mixing. In particular, experiments have provided significant motivation for many simulation and modeling studies, as well as validation data. Numerical simulations have also provided data that is not currently measurable or very difficult to measure accurately in RT unstable flows. Thus, simulations have also motivated new measurements in this class of buoyancy-driven flows. This overview discusses simulation and modeling studies synergistic with experiments and examples of how experiments have motivated simulations and models of RT instability, flow, and mixing. First, a brief summary of measured experimental and calculated simulation quantities, of experimental approaches, and of issues and challenges in the simulation and modeling of RT experiments is presented. Implicit large-eddy, direct numerical, and large-eddy simulations validated using RT experimental data are then discussed. This is followed by a discussion of modeling using analytical, modal, buoyancy–drag, and turbulent transport models of RT mixing experiments. The discussion will focus on three-dimensional RT mixing arising from multimode perturbations. Finally, this focused review concludes with a perspective on future simulation, modeling, and experimental directions for further research. Research in simulation and modeling of RT unstable flows, coupled with experiments, has made significant progress over the past several decades. This overview serves as an opportunity to both discuss progress and to stimulate future research on simulation and modeling of this unique class of hydrodynamically unstable turbulent flows.

42 ENGINEERING↗
DOE OSTI2020

Three-dimensional super line-localization in low signal-to-noise microscope images via prior-apprised unsupervised learning (PAUL)

Biological processes such as processive enzyme turnover and intracellular cargo tracking involve the dynamic motion of a small "article" along a curvilinear biopolymer track. To understand these processes that occur across multiple length and time scales, one must acquire both the trajectory of the particle and the position of the track along which it moves, possibly by combining high-resolution single-particle tracking with conventional microscopy. Yet, usually there is a significant resolution mismatch between these modalities: while the tracked particle is localized with a precision of 10 nm, the image of the surroundings is limited by optical difraction, with 200 nm lateral and 500 nm axial resolutions. Compared to the particle's trajectory, the surrounding curvilinear structure appears as a blurred and noisy image. This disparity in the spatial resolutions of the particle trajectory and the surrounding curvilinear structure image makes data reconstruction, as well as interpretation, particularly challenging. Analysis is further complicated when the curvilinear structures are oriented arbitrarily in 3D space. Here, we present a prior-apprised unsupervised learning (PAUL) approach to extract information from 3D images where the underlying features resemble a curved line such as a filament or microtubule. This three-stage framework starts with a Hessian-based feature enhancement, which is followed by feature registration, where local line segments are detected on repetitively sampled subimage tiles. In the final stage, statistical learning, segments are clustered based on their geometric relationships. Principal curves are then approximated from each segment group via statistical tools including principal component analysis, bootstrap and kernel transformation. This procedure is characterized on simulated images, where sub-voxel medium deviations from true curves have been achieved. The 3D PAUL approach has also been implemented for successful line localization in experimental 3D images of gold nanowires obtained using a multifocal microscope. Lastly, this work not only bridges the resolution gap between two microscopy modalities, but also allows us to conduct 3D super line-localization imaging experiments, without using super-resolution techniques.

42 ENGINEERING↗
DOE OSTI2024

Primordial nucleosynthesis with non-extensive statistics

The conventional Big Bang model successfully anticipates the initial abundances of 2 H(D), 3 He, and 4 He, aligning remarkably well with observational data. However, a persistent challenge arises in the case of 7 Li, where the predicted abundance exceeds observations by a factor of approximately three. Despite numerous efforts employing traditional nuclear physics to address this incongruity over the years, the enigma surrounding the lithium anomaly endures. In this context, we embark on an exploration of Big Bang nucleosynthesis (BBN) of light element abundances with the application of Tsallis non-extensive statistics. A comparison is made between the outcomes obtained by varying the non-extensive parameter q away from its unity value and both observational data and abundance predictions derived from the conventional big bang model. Here, a good agreement is found for the abundances of 4 He, 3 He and 7 Li, implying that the lithium abundance puzzle might be due to a subtle fine-tuning of the physics ingredients used to determine the BBN. However, the deuterium abundance deviates from observations.

Bertulani, Carlos A.↗
DOE OSTI2020

Orthotropic Viscoelastic Modeling of Polymeric Battery Separator

The separator is one of the most important components for battery safety since its failure can cause short-circuit that may lead to thermal runaway. As such, understanding the mechanical behaviors of separators is critical to improve battery safety. Nevertheless, modeling the mechanical behaviors of separators is challenging since they usually depend on multiple factors such as orientation, temperature and strain rate due to the microstructure of separators. Here we develop an orthotropic linear viscoelastic model for separators, which takes both anisotropy and strain rate effects into account. This model is the first step of a future model that considers more factors such as temperature and large deformation. The model has been implemented as a user material model in a finite element package, where a discretization algorithm is developed to evaluate the stiffness-based hereditary integral with a kernel of Prony series. The user model has been applied to a polypropylene (PP) separator Celgard ® 2400. The simulation results agree well with experimental data, which include the rate dependent uniaxial tensile behavior of the separator in the two in-plane material directions and in shear, and the strain contour patterns of every strain component during biaxial tension.

25 ENERGY STORAGE↗
DOE OSTI2025

Degradation of Fuel Cell Membrane Electrode Assemblies from Buses Operated More than 25,000 h

This study investigates the performance losses and degradation of proton-exchange-membrane fuel-cell stacks taken from the Alameda Contra Costa Transit District (AC Transit) bus system (Alameda and Contra Costa counties, California, United States) that were operated for over 25,000 h. Here, we focus on the origin of differences in electrochemical performance between beginning-of-life (BOL) and end-of-life states as well as diagnostic data acquired during the lifetime of the buses. In doing so, we employ in- and ex- situ characterization methods such as polarization curves, electrochemical impedance spectroscopy, electron microscopy, and X-ray characterization. Uniform degradation of the catalyst layer including Pt agglomeration/migration and electrode thinning was observed in all of the post-teardown measurements compared to BOL materials resulting from years of field operation. Despite these changes, the measured post-teardown performance suggests a sufficient output for the expected load, which indicate factors other than degradation of the membrane-electrode assemblies (MEAs) are likely responsible for the decommissioning of the stacks. The findings indicate that these MEA materials can enable long lifetime in fuel-cell vehicles, if the MEAs are not subjected to adverse operating conditions. The results also highlight the need for more in-vehicle diagnostics to maximize the lifetime of fuel cell vehicle (FCV) powerplants.

25 ENERGY STORAGE↗
DOE OSTI2022

GraphSAGE-Sparse v.0.2.0

SAND2022-12899 O GraphSAGE-Sparse is an implementation of the GraphSAGE Graph Neural Network that adds support for sparse data structures, as well as improved functionality through the Tensorflow 2 functional API. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

SciDAC↗
DOE OSTI2020

GridOPTICS/GridPACK

GridPACK is a software framework consisting of a set of modules designed to simplify the development of programs that model the power grid and run on parallel, high performance computing platforms. It also contains several fully developed applications, including powerflow, dynamic simulation, state estimation, Kalman filter analysis (dynamic state estimation), contingency analysis and real time path rating. These applications can be used either standalone or as components in more complicated workflows that combine several different types of application together. The framework modules are available as a combination of libraries and software templates and consist of components for setting up and distributing power grid networks, support for modeling the behavior of individual buses and branches in the network, converting the network models to the corresponding algebraic equations, and parallel routines for manipulating and solving large algebraic systems. The framework also contains a module for distributing tasks evenly amongst computing resources, even if individual tasks vary widely in their execution times. Additional modules support input and output, basic statistical analysis of contingency based calculations, distributed data structures, as well as basic profiling and error management.

Palmer, Bruce↗
DOE OSTI2025

Deep Design Data Portal (D3P) v0.01

The Deep Design Data Portal (D3P) tool was developed to demonstrate how readily accessible data sources, such as building energy model reports for design and baseline energy performance data for projects, can provide the data required for reporting to an industry initiative (AIA 2030 commitment), as well as more detailed data that makes the industry dataset more valuable to all stakeholders, enabling project level analysis and analysis of BEM industry trends. D3P provides an easier and less time-consuming way for firms to auto-extract data from this data source, compared to the current reporting workflows of the firms. The BEM reports are the first of several data sources that D3P could integrate. D3P also provides the ability for firms to review, compare, and evaluate the performance of their projects to not only their portfolio, but also to the larger anonymized industry dataset created each time a project is added to D3P. The intent of D3P is to become part of a data-sharing ecosystem to assist creating large anonymized industry datasets that are accessible to industry.

Regnier, Cynthia [Lawrence Berkeley National Labor↗
DOE OSTI2020

Scaling Behavior of a Turbulent Kinetic Energy Closure Scheme for the Stably Stratified Atmosphere: A Steady-State Analysis

Abstract We present a turbulent kinetic energy (TKE) closure scheme for the stably stratified atmosphere in which the mixing lengths for momentum and heat are not parameterized in the same manner. The key difference is that, while the mixing length for heat tends toward the stability independent mixing length for momentum in neutrally stratified conditions, it tends toward one based on the Brunt–Väisälä time scale and square root of the TKE in the limit of large stability. This enables a unique steady-state solution for TKE to be obtained, which we demonstrate would otherwise be impossible if the mixing lengths were the same. Despite the model’s relative simplicity, it is shown to perform reasonably well with observational data from the 1999 Cooperative Atmosphere–Surface Exchange Study (CASES-99) using commonly employed model constants. Analyzing the scaling behavior of the nondimensional velocity and potential temperature gradients, or of the stability (correction) functions, reveals that for large stability the present model scales in the same manner as the first-order operational scheme of Viterbo et al. Alternatively, it appears as a blend of two cases of the TKE closure scheme of Baas et al. Critically, because a unique steady-state TKE can be obtained, the present model avoids the nonphysical behavior identified in one of the cases of Baas et al.

Meteorology & Atmospheric Sciences↗
DOE OSTI2024

Stanford Thermal Earth Model for the Conterminous United States

Provided here are various forms of the Stanford Thermal Earth Model, as well as the data and methods used for its creation. The predictions produced by this model were visualized in two-dimensional spatial maps across the modeled depths (0-7 km) for the conterminous United States. The thermal earth model is made available as an application programming interface (API) and as feature layers on ArcGIS, which are both provided via links below. A data-driven spatial interpolation algorithm based on physics-informed graph neural networks was used to develop these national temperature-at-depth maps. The model satisfied the three-dimensional heat conduction law by predicting subsurface temperature, surface heat flow, and rock thermal conductivity. Many physical quantities, including bottomhole temperature, depth, geographic coordinates, elevation, sediment thickness, magnetic anomaly, gravity anomaly, gamma-ray flux of radioactive elements, seismicity, and electric conductivity were used as model inputs. Surface heat flow, temperature, and thermal conductivity predictions were constructed for depths of 0-7 km at an interval of 1 km with spatial resolution of 18 km2 per grid cell. The model showed superior temperature, surface heat flow and thermal conductivity mean absolute errors of 4.8C, 8.1 mW/m2 and 0.07 W/(C-m), respectively..

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

Soil Environmental Conditions in the East River Watershed, CO

This dataset contains depth-resolved soil environmental variables collected between June 2016 and October 2018 from the Bradley Meadow site in the East River watershed. Datalogger output from 7 Campbell CS655 12 cm Soil Moisture and Temperature Sensors including depth, temperature, volumetric water content, and electrical conductivity are included in ‘BM_Merged_T_VWC_0616_10_18.csv’. Sensors were installed in June 2016. Data have been processed to merge raw sensor data and to remove additional variables. No additional QA/QC was performed. Measured pCO2 and depth are contained in ‘BM_EGM_WELL_CO2.csv’. These data represent gas well samples measured via injection using a PP Systems EGM-5 infra-red gas analyzer as described in the methods section. Measured CO2 surface flux values are contained in 'BM_EGM_Surface_Flux.csv'. These were measured using the PP Systems EGM-5 with the Soil Respiration Chamber attachment. Multiple reps are reported for each measurement including CO2 flux rate calculations using built-in linear and quadratic function methods, and average and standard deviations are taken across all reps and calculation methods.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Patterns and controls on island-wide aboveground biomass accumulation in second-growth forests of Puerto Rico

This dataset includes two products from Martinuzzi et al. (2022): "biomass.tif" is a 26-m resolution forest biomass (AGB) map for Puerto Rico derived from NASA G-LiHT lidar data and forest inventory data (FIA plots), in raster format. "input_multivariate_v2.shp" is a point shapefile with information on forest age, substrate, past land use, topographic wetness, slope, and precipitation, for each forest pixel. These two datasets can be used to evaluate spatial patterns of AGB in second-growth forests across transects of lidar data in humid forests of Puerto Rico, and to analyze relationship(s) between AGB and environmental variables. Additional information on these products can be found on the supporting file called "Readme.txt" included within the data archive, as well as in the original manuscript by Martinuzzi et al (2022).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Co-op at Sandia National Laboratories (July - December 2019, Final Report)

This co-op was performed at Sandia National Laboratories (SNL) within the Weapon Surety Engineering 11 Department (9435), which is a customer-focused organization that provides engineering and system analysis expertise to ensure a safe deterrent throughout the entire weapon lifecycle. Engineers in 9435 develop a deep knowledge in both component and system function to support rigorous evaluation and mitigation of potential failure modes. They operate across multiple engineering disciplines (mechanical, electrical, computer, materials and systems engineering) with opportunities to develop crossdisciplinary capability. The team supports a variety of stockpile systems and is part of the product teams during development, design and production, as well as advanced concept and exploratory efforts. 9435 engineers use their extensive component and system knowledge, as well as experimental data and modeling, to ensure products function as intended with assured safety. Members of the department learn the function of multiple components, how those components integrate within the system and apply surety principles and processes to ensure a safe, secure, reliable, and effective U.S. nuclear deterrent.

42 ENGINEERING↗
DOE OSTI2020

Supernova Cosmology with the Dark Energy Survey

This proposal requests supplemental funds to addresses our continued effort to carry out a Type Ia supernova (SN Ia) cosmology analysis with the Dark Energy Survey (DES) data. DES is well underway to discovering and identifying thousands of SN Ia out to a cosmological redshift of z =1.2 over its 5-year survey, and will obtain the best constraints on dark energy and its possible evolution with redshift. We propose to develop two key analysis algorithms and tools that are critical for this achieving the goals: 1) a final photometry pipeline that uses novel techniques to extract unbiased SN fluxes from the images and 2) a robust statistical framework for measuring cosmological parameters from SN Ia light curves with well-characterized systematic uncertainties.

79 ASTRONOMY AND ASTROPHYSICS↗