Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vertical orientation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Numerical simulation of baroclinic Jovian vortices

We examine the evolution of baroclinic vortices in a time-dependent, nonlinear numerical model of a Jovian atmosphere. The model uses a normal-mode expansion in the vertical, using the barotropic and first two baroclinic modes. Results for the stability of baroclinic vortices on an f plane in the absence of a mean zonal flow are similar to results of Earth vortex models, although the presence of a fluid interior on the Jovian planets shifts the stability boundaries to smaller length scales. The presence of a barotropic mean zonal flow in the interior stabilizes vortices against instability and significantly modifies the finite amplitude form of baroclinic instabilities. The effect of a zonal flow on a form of barotropic instability produces periodic oscillations in the latitude and longitude of the vortex as observed at the level of the cloud tops. This instability may explain some, but not all, observations of longitudinal oscillations of vortices on the outer planets. Oscillations in aspect ratio and orientation of stable vortices in a zonal shear flow are observed in this baroclinic model, as in simpler two-dimensional models. Such oscillations are also observed in the atmospheres of Jupiter and Neptune. The meridional propagation and decay of vortices on a beta plane is inhibited by the presence of a mean zonal flow. The direction of propagation of a vortex relative to the mean zonal flow depends upon the sign of the meridional potential vorticity gradient; combined with observations of vortex drift rates, this may provide a constraint on model assumption for the flow in the deep interior of the Jovian planets.

Achterberg, Richard K.↗
NASA NTRS1985

Static internal performance of a single-engine onaxisymmetric-nozzle vaned-thrust-reverser design with thrust modulation capabilities

An investigation has been conducted at wind-off conditions in the stati-test facility of the Langley 16-Foot Transonic Tunnel. The tests were conducted on a single-engine reverser configuration with partial and full reverse-thrust modulation capabilities. The reverser design had four ports with equal areas. These ports were angled outboard 30 deg from the vertical impart of a splay angle to the reverse exhaust flow. This splaying of reverser flow was intended to prevent impingement of exhaust flow on empennage surfaces and to help avoid inlet reingestion of exhaust gas when the reverser is integrated into an actual airplane configuration. External vane boxes were located directly over each of the four ports to provide variation of reverser efflux angle from 140 deg to 26 deg (measured forward from the horizontal reference axis). The reverser model was tested with both a butterfly-type inner door and an internal slider door to provide area control for each individual port. In addition, main nozzle throat area and vector angle were varied to examine various methods of modulating thrust levels. Other model variables included vane box configuration (four or six vanes per box), orientation of external vane boxes with respect to internal port walls (splay angle shims), and vane box sideplates. Nozzle pressure ratio was varied from 2.0 approximately 7.0.

Leavitt, L. D.↗
NASA NTRS2019

TPSAS-NF1676L-32967-DND

The Stratospheric Aerosol and Gas Experiment III (SAGE III) was delivered to the International Space Station (ISS) on 23 February 2017. The SAGE III payload was robotically installed on Ex-PRESS Logistics Carrier-4 (ELC-4) on the S3 Truss and began acquiring science measurements on 17 March 2017. The SAGE III telescope and instrument assembly employs the methods of solar occultation and lunar occultation to retrieve near-global vertical profiles of atmospheric ozone, water vapor, nitrogen dioxide, multiwavelength aerosol extinctions, and other gaseous species and atmospheric state parameters. The activities on the ISS contribute to a dynamic operational environment. The attitude changes, EVAs, and the arrival and departure of vehicles require continual consideration when operating. After operating for two years, the SAGE III payload has planned over 20,000 occultation events and acquired approximately 17,000. A significant number of the missed events were because of visiting vehicles blocking the field of view. Using instrument data from these blocked events, the SAGE III team has mapped the structure of the ISS from the perspective of the instrument. Error Correction and Detection (EDAC) methods are necessary to preserve the functionality of the instrument software. On SAGE III the Hexapod Electrical Unit (HEU), which controls the orientation of the telescope, reports whenever an EDAC occurs. By analyzing the EDAC messages in the HEU telemetry, information concerning the orbital environment of the ISS can be obtained. To be presented is a summary of operational considerations when working on ISS along with how instrument data can be used to map the structural and electromagnetic environment of ISS.

Andrew J Peterson↗
DOE OSTI2024

Directing Charge Carriers and Ferroelectric Domains at Lateral Interfaces in van der Waals Heterostructures

Emergent phenomena in traditional ferroelectrics are frequently observed at heterointerfaces. Accessing such functionalities in van der Waals ferroelectrics requires the formation of layered heterostructures, either vertically stacked (similar to oxide ferroelectrics) or laterally stitched (without equivalent in 3D-crystals). Here, we investigate lateral heterostructures of the ferroelectric van der Waals semiconductors SnSe and SnS. A two-step process produces ultrathin crystals comprising an SnSe core laterally joined to an SnS edge-band, as confirmed by Raman spectroscopy, transmission electron microscopy (TEM) imaging, and electron diffraction. TEM shows a moiré pattern across the SnSe core due to coverage by an ultrathin SnS layer. The ability of the lateral interface (IF) to direct excited carriers, probed by cathodoluminescence, shows electron transfer over 560 nm diffusion length from the SnS edge-band. Large, thin flakes supporting ferroelectricity allow investigating domains and domain wall interactions in uniform crystals and lateral heterostructures. Polarized optical microscopy of sub-20 nm flakes consistently shows ⟨110⟩ oriented stripe domains with mirror-twin domain walls. Heterostructures adopt two domain configurations, with domains either constrained to the SnSe core or propagating across the entire SnSe–SnS flakes. Furthermore, the combined results demonstrate multifunctional van der Waals heterostructures with high-quality IFs presenting extraordinary opportunities for manipulating carrier flows and ferroelectric domain patterns.

2D ferroelectrics↗
NASA NTRS1997

A positively gravitropic mutant mirrors the wild-type protonemal response in the moss Ceratodon purpureus

Wild-type Ceratodon purpureus (Hedw.) Brid. protonemata grow up in the dark by negative gravitropism. When upright wild-type protonemata are reoriented 90 degrees, they temporarily grow down soon after reorientation ("initial reversal") and also prior to cytokinesis ("mitotic reversal"). A positively gravitropic mutant designated wrong- way response (wwr-1) has been isolated by screening ultraviolet light-mutagenized Ceratodon protonemata. Protonemata of wwr-l reoriented from the vertical to the horizontal grow down with kinetics comparable to those of the wild-type. Protonemata of wwr-1 also show initial and mitotic reversals where they temporarily grow up. Thus, the direction of gravitropism, initial reversal, and mitotic reversal are coordinated though each are opposite in wwr-1 compared to the wild-type. Normal plastid zonation is still maintained in dark-grown wwr-1 apical cells, but the plastids are more numerous and plastid sedimentation is more pronounced. In addition, wwr-1 apical cells are wider and the tips greener than in the wild-type. These data suggest that a functional WWR gene product is not necessary for the establishment of some gravitropic polarity, for gravitropism, or for the coordination of the reversals. Thus, the WWR protein may normally transduce information about cell orientation.

Non-NASA Center↗
DOE OSTI2020

Subdomain cryo-EM structure of nodaviral replication protein A crown complex provides mechanistic insights into RNA genome replication

For positive-strand RNA [(+)RNA] viruses, the major target for antiviral therapies is genomic RNA replication, which occurs at poorly understood membrane-bound viral RNA replication complexes. Recent cryoelectron microscopy (cryo-EM) of nodavirus RNA replication complexes revealed that the viral double-stranded RNA replication template is coiled inside a 30- to 90-nm invagination of the outer mitochondrial membrane, whose necked aperture to the cytoplasm is gated by a 12-fold symmetric, 35-nm diameter “crown” complex that contains multifunctional viral RNA replication protein A. Here we report optimizing cryo-EM tomography and image processing to improve crown resolution from 33 to 8.5 Å. This resolves the crown into 12 distinct vertical segments, each with 3 major subdomains: A membrane-connected basal lobe and an apical lobe that together comprise the ~19-nm-diameter central turret, and a leg emerging from the basal lobe that connects to the membrane at ~35-nm diameter. Despite widely varying replication vesicle diameters, the resulting two rings of membrane interaction sites constrain the vesicle neck to a highly uniform shape. Labeling protein A with a His-tag that binds 5-nm Ni-nanogold allowed cryo-EM tomography mapping of the C terminus of protein A to the apical lobe, which correlates well with the predicted structure of the C-proximal polymerase domain of protein A. These and other results indicate that the crown contains 12 copies of protein A arranged basally to apically in an N-to-C orientation. Moreover, the apical polymerase localization has significant mechanistic implications for template RNA recruitment and (-) and (+)RNA synthesis.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2015

Second Annual Transformative Vertical Flight Concepts Workshop: Enabling New Flight Concepts Through Novel Propulsion and Energy Architectures

On August 3rd and 4th, 2015, a workshop was held at the NASA Ames Research Center, located at the Moffett Federal Airfield in California to explore the aviation communities interest in Transformative Vertical Flight (TVF) Concepts. The Workshop was sponsored by the AHS International (AHS), the American Institute of Aeronautics and Astronautics (AIAA), the National Aeronautics and Space Administration (NASA), and hosted by the NASA Aeronautics Research Institute (NARI). This second annual workshop built on the success and enthusiasm generated by the first TVF Workshop held in Washington, DC in August of 2014. The previous Workshop identified the existence of a multi-disciplinary community interested in this topic and established a consensus among the participants that opportunities to establish further collaborations in this area are warranted. The desire to conduct a series of annual workshops augmented by online virtual technical seminars to strengthen the TVF community and continue planning for advocacy and collaboration was a direct outcome of the first Workshop. The second Workshop organizers focused on four desired action-oriented outcomes. The first was to establish and document common stakeholder needs and areas of potential collaborations. This includes advocacy strategies to encourage the future success of unconventional vertiport capable flight concept solutions that are enabled by emerging technologies. The second was to assemble a community that can collaborate on new conceptual design and analysis tools to permit novel configuration paths with far greater multi-disciplinary coupling (i.e., aero-propulsive-control) to be investigated. The third was to establish a community to develop and deploy regulatory guidelines. This community would have the potential to initiate formation of an American Society for Testing and Materials (ASTM) F44 Committee Subgroup for the development of consensus-based certification standards for General Aviation scale vertiport capable flight systems. These standards need to accommodate novel fixed wing concepts that do not fit within the existing Federal Aviation Administration (FAA) rotorcraft certification framework (Code of Federal Regulations, Title 14, Chapter I, Subchapter C, Part 27). The fourth desired outcome was to launch an information campaign to ensure key U.S. Government agencies understand the potential benefits and industry interest in establishing new vertiport capable flight markets. This record of the Workshop proceedings documents Workshop activities and products including summaries of the video recorded technical presentations, overviews of three breakout sessions (Missions Operational Concepts, Prioritized Technical Challenges, Regulatory Roadmap), and a preliminary draft roadmap framework for TVF.

V/STOL↗
NASA NTRS2009

Adaptive Morphological Feature-Based Object Classifier for a Color Imaging System

Utilizing a Compact Color Microscope Imaging System (CCMIS), a unique algorithm has been developed that combines human intelligence along with machine vision techniques to produce an autonomous microscope tool for biomedical, industrial, and space applications. This technique is based on an adaptive, morphological, feature-based mapping function comprising 24 mutually inclusive feature metrics that are used to determine the metrics for complex cell/objects derived from color image analysis. Some of the features include: Area (total numbers of non-background pixels inside and including the perimeter), Bounding Box (smallest rectangle that bounds and object), centerX (x-coordinate of intensity-weighted, center-of-mass of an entire object or multi-object blob), centerY (y-coordinate of intensity-weighted, center-of-mass, of an entire object or multi-object blob), Circumference (a measure of circumference that takes into account whether neighboring pixels are diagonal, which is a longer distance than horizontally or vertically joined pixels), . Elongation (measure of particle elongation given as a number between 0 and 1. If equal to 1, the particle bounding box is square. As the elongation decreases from 1, the particle becomes more elongated), . Ext_vector (extremal vector), . Major Axis (the length of a major axis of a smallest ellipse encompassing an object), . Minor Axis (the length of a minor axis of a smallest ellipse encompassing an object), . Partial (indicates if the particle extends beyond the field of view), . Perimeter Points (points that make up a particle perimeter), . Roundness [(4(pi) x area)/perimeter(squared)) the result is a measure of object roundness, or compactness, given as a value between 0 and 1. The greater the ratio, the rounder the object.], . Thin in center (determines if an object becomes thin in the center, (figure-eight-shaped), . Theta (orientation of the major axis), . Smoothness and color metrics for each component (red, green, blue) the minimum, maximum, average, and standard deviation within the particle are tracked. These metrics can be used for autonomous analysis of color images from a microscope, video camera, or digital, still image. It can also automatically identify tumor morphology of stained images and has been used to detect stained cell phenomena (see figure).

McDowell, Mark↗
NASA NTRS2023

Reducing Aerosol Forcing Uncertainty by Combining Models With Satellite and Within-The-Atmosphere Observations: A Three-Way Street

Aerosol forcing uncertainty represents the largest climate forcing uncertainty overall. Its magnitude has remained virtually undiminished over the past 20 years despite considerable advances in understanding most of the key contributing elements. Recent work has produced modest increases only in the confidence of the uncertainty estimate itself. This review summarizes the contributions toward reducing the uncertainty in the aerosol forcing of climate made by satellite observations, measurements taken within the atmosphere, as well as modeling and data assimilation. We adopt a more measurement-oriented perspective than most reviews of the subject in assessing the strengths and limitations of each; gaps and possible ways to fill them are considered. Currently planned programs supporting advanced, global-scale satellite and surface-based aerosol, cloud, and precursor gas observations, climate modeling, and intensive field campaigns aimed at characterizing the underlying physical and chemical processes involved, are all essential. But in addition, new efforts are needed: (a) to obtain systematic aircraft in situ measurements capturing the multi-variate probability distribution functions of particle optical, microphysical, and chemical properties (and associated uncertainty estimates), as well as co-variability with meteorology, for the major aerosol airmass types; (b) to conceive, develop, and implement a suborbital (aircraft plus surface-based) program aimed at systematically quantifying the cloud-scale microphysics, cloud optical properties, and cloud-related vertical velocities associated with aerosol-cloud interactions; and (c) to focus much more research on integrating the unique contributions of satellite observations, suborbital measurements, and modeling, to reduce the persistent uncertainty in aerosol climate forcing.

aerosol climate forcing↗
NASA NTRS1990

Stability of an oscillated fluid with a uniform density gradient

Instabilities in a fluid with a constant density gradient that is subject to arbitrarily oriented oscillatory accelerations are considered. With the Boussinesq approximation and for the case of an unbounded fluid, transformation to Lagrangian coordinates allows the reduction of the problem to an ordinary differential equation for each three-dimensional wavenumber. The problem has three parameters: the nondimensional amplitude R of the base-state oscillation, the nondimensional level of background steady acceleration, which for some cases can be represented in terms of a local (in time) Richardson number Ri, and the Prandtl number Pr. Some general bounds on stability are derived. For Pr = 1 closed-form solutions are found for impulse (delta function) accelerations and a general asymptotic solution is constructed for large R and general imposed accelerations. The asymptotic solution takes advantage of the fact that at large R wave growth is concentrated at 'zero points'. These are times when the effective vertical wavenumber passes through zero. Kelvin-Helmholtz instabilities are found to dominate at low R, while Rayleigh-Taylor instabilities dominate at high R. At high R, the uniform shear of the Kelvin-Helmholtz case tends to distort and weaken instability waves. With unsteady flows, Ri = 1/4 is no longer an instability limit. Significant instabilities have been found for sinusoidal forcing for Ri up to 0.6.

Jacqmin, David↗
NASA NTRS2010

Verify MesoNAM Performance

The AMU conducted an objective analysis of the MesoNAM forecasts compared to observed values from sensors at specified KSC/CCAFS wind towers by calculating the following statistics to verify the performance of the model: 1) Bias (mean difference), 2) Standard deviation of Bias, 3) Root Mean Square Error (RMSE), and 4) Hypothesis test for Bias = O. The 45 WS LWOs use the MesoNAM to support launch weather operations. However, the actual performance of the model at KSC and CCAFS had not been measured objectively. The analysis compared the MesoNAM forecast winds, temperature and dew point to the observed values from the sensors on wind towers. The data were stratified by tower sensor, month and onshore/offshore wind direction based on the orientation of the coastline to each tower's location. The model's performance statistics were then calculated for each wind tower based on sensor height and model initialization time. The period of record for the data used in this task was based on the operational start of the current MesoNAM in mid-August 2006 and so the task began with the first full month of data, September 2006, through May 2010. The analysis of model performance indicated: a) The accuracy decreased as the forecast valid time from the model initialization increased, b) There was a diurnal signal in T with a cool bias during the late night and a warm bias during the afternoon, c) There was a diurnal signal in Td with a low bias during the afternoon and a high bias during the late night, and d) The model parameters at each vertical level most closely matched the observed parameters at heights closest to those vertical levels. The AMU developed a GUI that consists of a multi-level drop-down menu written in JavaScript embedded within the HTML code. This tool allows the LWO to easily and efficiently navigate among the charts and spreadsheet files containing the model performance statistics. The objective statistics give the LWOs knowledge of the model's strengths and weaknesses and the GUI allows quick access to the data which will result in improved forecasts for operations.

Bauman, William H., III↗
NASA NTRS1995

Method and apparatus for weaving curved material preforms

A method and apparatus for fabricating straight or curved planar or three-dimensional (C channel, for example) fabric for fabrication into composite structures is presented. In the first embodiment, the fill yarns are inserted between layers of warp yarns, and a canted or curved reed, depending on the desired orientation of the fill yarns, is used to compact or 'beat-up' the fill yarns. In the second embodiment, the warp yarns of the fabric are curved using a conical or a combination of conical and cylindrical rollers to effect differential fabric take-up of the warp yarns for obtaining a constant radius of curvature of the warp yarns. In a third embodiment, a clamping bar fabric take-up device is used to effect the differential fabric take-up of the warp yarns for obtaining straight warp yarns, curved warp yarns with a constant radius of curvature, curved warp yarns with a non-contant radius of curvature, or some combinations of straight and curved warp yarns. In a fourth embodiment, for forming the flanges of the curved C channel, the warp yarns are alternately inserted through adjacent dent wires of the reed to permit vertical weaving of the flanges.

Farley, Gary L.↗
DOE OSTI2021

The Role of Stratigraphy and Loading History in Generating Complex Compaction Bands in Idealized Field-Scale Settings

The Buckskin Gulch locality in Utah is a landmark example of compaction localization. The outcrop of this locality involves distinct stratigraphic heterogeneity and was exposed to complex loading history. It features multiple sets of deformation bands with different kinematics and orientation. Similar formations were seen in the Valley of Fire, Nevada, and the Orange quarry, France, among other localities. The formation of such complex structures, their propagation mechanisms, and frequency is affected by numerous local and ambient factors whose impacts are not yet fully understood. The simulation of the above-mentioned localities is not feasible because of the limited amount of available information. This work, instead, investigates from a geomechanics standpoint how the interplay among material nonlinearity, outcrop stratigraphy, and loading history interconnects with specific spatiotemporal patterns of compaction band propagation. Our study shows that the system stratigraphy can be responsible for the emergence of coexisting compaction bands with different inclination and kinematics. Specifically, we show that stiffness contrasts induce nonlocal stress changes which may favor the initiation of secondary structures with different compaction localization characteristics. Furthermore, systems of inclined compaction bands induced by burial increase display secondary, noncontemporaneous sets of vertical compaction bands under the effects of postburial shortening. Our results indicate that stages of intermediate burial decrease prior to tectonic shortening can promote the formation of such complex systems. Despite the simplifications involved in our analyses, these findings show how geomechanics computations complement field observations and could provide a mechanics-based validation of site-specific reconstruction hypothesis.

58 GEOSCIENCES↗
NASA NTRS2005

Influence of Nucleation Mechanisms on the Radiative Properties of Deep Convective Clouds and Subvisible Cirrus in CRYSTAL/FACE

During the past few years we have conducted work on several different topics, as reflected by our publications. As one of the Co-Project scientists for The Cirrus Regional Study of Tropical Anvils and Cirrus Layers - Florida Area Cirrus Experiment (CRYSTAL FACE) we worked to help design the mission and then conduct it in the field. Another major activity during the past two years has been to pull together various groups to formulate plans for follow on missions to CRYSTAL FACE. We organized a workshop at the University of Colorado during the summer of 2003 to assess the best locations for future missions. Working with a group of about 10 scientists from around the country we prepared a science-planning document (Tropical Composition, Cloud and Climate Coupling Experiment (TC(sup 4)) that outlined the rationale, locations, strategy to accomplish the goals, and possible payloads for a set of three tropical missions. We also prepared background materials for various NRAs being prepared at NASA Headquarters for missions in Costa Rica, Darwin and Guam. In conjunction with the group at NASA Ames we have helped build a new numerical model for deep convection and have applied that model to simulate the CRYSTAL data. Our goal in particular has been to better understand how convection distributes water vapor isotopes. CRYSTAL observations of water isotopes are very different from those suggested by previous workers who assumed the isotopes would obey Rayleigh fractionation. The water isotope study has several implications. First it is a check on the realism of the deep convection model. Second, the isotopes are a measure of the precipitation removal in the atmosphere. Hence they provide a constraint on a parameter that is difficult to otherwise measure. Finally it has been suggested that isotopes may be the key to unraveling the water transport into the stratosphere and upper troposphere. Such transport is critical both for the radiation balance and for stratospheric chemistry. Ours is the first model that is able to treat this transport. Our initial results have just been submitted to Geophys. Res. Lett (Smith et al., 2005). Essentially we are able to explain the vertical profiles of isotopes in the tropical tropopause transition layer. We are also able to account for stratospheric humidity and isotope abundances with this model. We have also been heavily involved in trying to improve our understanding of nitric acid condensation on ice. Gao et al (2004) have shown that water supersaturations above ice occur when the atmosphere is supersaturated with respect to nitric acid trihydrate. As one of the co-authors of that work, we suggested the mechanism that may explain why this is occurring. Essentially, ice does not like to grow near unit supersaturation, but does so because the water molecules can find sites on the ice surface to attach themselves to before they fly off the ice surface. This phenomena was well known in the 1960s when it was a source of debate about whether condensation and evaporation coefficients for ice would be the same. Evaporation does not require any molecular orientation, while condensation does, so it was possible that the coefficients would differ. They don't differ because the water molecules rapidly move across the surface and find places to attach. Nitric acid may be occupying these preferred sites and therefore the water molecules can't find a desirable place to attach. We anticipate that this research will be the subject of laboratory work during the coming few years. Another possibility that has been suggested is that cubic ice is forming in clouds. We have measured the vapor pressure of cubic ice, and plan to publish that result in the next few months. We have also been working on additional aspects of the condensation of nitric acid on ice. With Y. Kondo we studied the condensation of NOy on ice using the SOLVE data. Gamblin et al. have continued this work. The CRYSTAL NOy and HNO, groups have shown th their data can be fit using standard Langmuir isotherms as suggested in some, but not all, laboratory studies. We have found in the SOLVE data set that this is not the case. Moreover some laboratory studies show there are important kinetic effects that may be occurring in the atmosphere limiting the transfer of nitric acid to the ice. The SOLVE data seem consistent with these studies. We are currently re-analyzing the CRYSTAL data to look for these kinetic effects. There are a number of implications of these studies. One of the more interesting is that the nitric acid coating on ice can be used as a cloud clock to determine how long the cloud parcel has been in existence. We have also been involved with several laboratory studies. We have worked to improve the database on ice optical constants, which are critical for remote sensing. We have also studied the ways in which ice nucleates on clays. We suspect now that the standard theories used for depositional ice nucleation are completely incorrect. Further work will be needed to develop a new theory.

Toon, Owen B.↗
NASA NTRS2003

A Numerical Study of Hurricane Erin (2001): Model Verification and Storm Evolution - Part 1

The Pennsylvania State University-National Center for Atmospheric Research mesoscale model MM5 is used to simulate Hurricane Erin (2001) at high resolution (4-km spacing) from its early development as a tropical depression on 7 September 2001, through a period of rapid intensification into a strong hurricane (8-9 September), and finally into a stage during which it maintains its intensity on 10 September. These three stages of development, intensification, and maintenance in the simulation are in good agreement with the observed evolution of Erin. The simulation shows that during the development and early portions of the intensification stages, intensification is favored because the environmental wind shear is weak and the system moves over a warm tongue of water. As Erin intensifies, the wind'shear gradually increases with the approach of an upper-level trough and strengthening of a low-level high pressure system. By 10 September, the wind shear peaks and begins to decrease, the storm moves over slightly cooler waters, and the intensification ends. Important structural changes occur at this time as the outer precipitation shift from the northeastern and eastern sides to the western side of the eye and precipitation begins to surround the entire eye to initiate the development of a secondary wind maximum and an outer eyewall. The simulation is used to investigate the role of vertical wind shear in the changes of the precipitation structure that took place between 9-10 September by examining the effects of both storm-relative flow changes and changes in the shear-induced tilt. Qualitative agreement is found between the divergence pattern and advection of vorticity by the relative flow with convergence (divergence) generally associated with asymmetric inflow (outflow) in the eyewall region. The shift in the outer precipitation is consistent with a shift in the low-level relative inflow from the northeastern to the northwestern side of the storm. The changes in the relative flow are associated with changes in the winds as the hurricane moves relative to the upper tough and the low-level high pressure system. Examination of the shear-induced tilt of the vortex shows that the change in the tilt direction is greater than that of the shear direction as the tilt shifts from a northerly orientation to northwesterly. Consistent with theory for adiabatic vortices, the maximum low-level convergence and upper-level divergence (and the maximum upward motion) occurs in the direction of tilt. Consequently, both mechanisms may play roles in the changes in the precipitation pattern.

Wu, Liquang↗
DOE OSTI2025

Unsteady- and Steady-State Relative Permeability Study with X-ray and Acoustic Monitoring for CO 2 Storage in Deep Saline Aquifers

In this study, we link the multiphase flow measurements with controls of sedimentary structures (e.g., heterogeneity and anisotropy) on relative permeability to variations in ultrasonic velocities for two deep saline aquifer formations (Entrada and Bluff Sandstones) in the San Juan Basin of the Southwestern USA. The rock specimens were extracted from outcrop sites near Durango, CO, USA. They have distinct differences in grain size, cementation composition, and individual chemical amounts, despite both formations being eolian sandstones. We performed a series of unsteady- and steady-state CO 2 -brine relative permeability experiments under capillary-controlled displacement rates. Unsteady-state experiments were conducted at 71 °C and 9.65 MPa; steady-state experiments were conducted at 85 °C and 22.8 MPa and 89 °C and 24.1 MPa for the Bluff and Entrada Sandstones, respectively. During the unsteady experiments, X-ray computed tomography was used to visualize multiphase flow in porous media and quantify saturations during brine drainage under various flow rates. Scan images and saturation profiles indicate that the CO 2 distribution in the pore volume was strongly impacted by the presence of high-angle cross-laminations, heterogeneous rock structure, and direction of bedding orientation. Those factors contribute to dramatic and quick initial breakthroughs and affect the overall saturation dynamics. Steady-state relative permeability tests were conducted at net flow rates of 1 mL/min for both brine drainage and imbibition. During the experimental steps, the CO 2 fractional flow was increased and decreased for both drainage and imbibition scenarios to mimic the front when CO 2 contacts brine and behind the front when brine enters space previously occupied by CO 2 . It was found that compressional velocity decreased, while shear waves slightly increased as brine saturation decreased. The hysteresis effects for the relative permeability and acoustic velocities were distinct. Furthermore, the CO 2 /brine front stability is quantified by applying a mobility ratio approach to spot saturations at which the boundary line between fluids becomes uneven. The results presented in this work can potentially boost the quality and precision of forecasts for the CO 2 storage projects in which the vertical and horizontal core-scale heterogeneity and anisotropy impact the plume migration within host reservoirs.

carbon dioxide (CO2)↗
NASA NTRS1997

Stereological analysis of gravitropism in protonemata of the moss Ceratodon

Apical cells of dark-grown protonemata of the moss Cerotodon purpureus are negatively gravitropic. Previous light microscopy has shown that reorientation to the horizontal induces amyloplast sedimentation and redistribution of microtubules. To determine whether other components become redistributed laterally or axially, the apical 35 micrometers of both vertical and horizontal apical cells were compared stereologically using transmission electron microscopy. Reorientation to the horizontal changed the longitudinal distributions of tubular ER, Golgi stacks, and vesicles but not cisternal ER, mitochondria, and plastids. Only plastids showed a statistically significant lateral redistribution after horizontal placement. Qualitative examination of the sedimentation zone showed plastids sedimented close to peripherally located ER with vacuoles displaced above plastids. These results argue against a model where differential tip growth results from a redistribution of Golgi stacks or exocytic vesicles.

Non-NASA Center↗
NASA NTRS1990

Diurnal variation in the turbulent structure of the cloudy marine boundary layer during FIRE 1987

During the 1987 FIRE marine stratocumulus experiment the U.K. Meteorological Office operated a set of turbulence probes attached to the tether cable of a balloon based on San Nicolas Island. Typically six probes were used; each probe is fitted with Gill propeller anemometers, a platinum resistance thermometer and wet and dry thermistors, to permit measurements of the fluxes of momentum, heat, and humidity. The orientation of each probe is determined from a pair of inclinometers and a three-axis magnetometer. Sufficient information is available to allow the measured wind velocities to be corrected for the motion of the balloon. On the 14 to 15 July measurements were made over the period 1530 to 1200 UTC and again, after a short break for battery recharging and topping-up the balloon, between 0400 to 0900 UTC. Data were therefore recorded from morning to early evening, and again for a period overnight. Six probes were available for the daytime measurements, five for the night. Data were recorded at 4 Hz for individual periods of a little over an hour. The intention was to keep a minimum of one probe at or just above cloud top; small changes in balloon height were necessary to accommodate changes in inversion height. The ability of the balloon system to make simultaneous measurements at several levels allows the vertical structure of the boundary layer to be displayed without resort to composites. Turbulent statistics were calculated from 2 hour periods, one straddling local noon and one at night. These were subdivided into half-hour averaging intervals for the evaluation of variances and fluxes.

Hignett, Phillip↗