Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Data Validation Package November 2015 Groundwater and Surface Water Sampling at the Old and New Rifle, Colorado, Processing Sites February 2016

Water samples were collected from 36 locations at New Rifle and Old Rifle, Colorado, Processing Sites. Duplicate samples were collected from New Rifle locations 0659 and 0855, and Old Rifle location 0304. One equipment blank was collected after decontamination of non-dedicated equipment used to collect one surface water sample. Sampling and analyses were conducted as specified in the Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated). New Rifle Site Samples were collected at the New Rifle site from 16 monitoring wells and 7 surface locations in compliance with the December 2008 Groundwater Compliance Action Plan [GCAP] for the New Rifle, Colorado, Processing Site (LMS/RFN/S01920), with one exception: New Rifle location 0635 could not be sampled because it was inaccessible; a fence installed by the Colorado Department of Transportation prevents access to this location. DOE is currently negotiating access with the Colorado Department of Transportation. Analytes measured at the New Rifle site included contaminants of concern (COCs) (arsenic, molybdenum, nitrate + nitrite as nitrogen, selenium, uranium, and vanadium) ammonia as nitrogen, major cations, and major anions. Field measurements of total alkalinity, oxidation- reduction potential, pH, specific conductance, turbidity, and temperature were made at each location, and the water level was measured at each sampled well. A proposed alternate concentration limit (ACL) for vanadium of 50 milligrams per liter (mg/L), specific to the compliance (POC) wells (RFN-0217, -0659, -0664, and -0669) is included in the New Rifle GCAP. Vanadium concentrations in the POC wells were below the proposed ACL as shown in the time-concentration graphs in the Data Presentation section (Attachment 2). Time-concentration graphs from all other locations sampled are also included in Attachment 2. Sampling location RFN-0195 was misidentified for the June/August 2014 and November 2014 sampling events. (Well RFN-0609 was inadvertently sampled instead of RFN-0195 in 2014.) The results for RFN-0195 have been corrected, and are included in associated time-concentration graphs for this location. Recent results for RFN-0195 are consistent with established trends with the possible exception of vanadium. The most recent result for vanadium showed an increase over recent values. Vanadium concentrations at RFN-0195 and other locations will continue to be evaluated in the future to determine the potential for deviations from established trends. The surface water locations were sampled to monitor the impact of groundwater discharge. COC concentrations at Colorado River surface water locations RFN-0324 and RFN-0326, downgradient of the site, remained low and were consistent with historical results, as shown in the time-concentration graphs. COC concentrations did not indicate there are any impacts related to groundwater discharge to the river. In many cases, elevated COC concentrations at the New Rifle site pond locations were observed, as shown in the time-versus concentration graphs. As noted in the GCAP, this indicates impacts from groundwater discharge to the ponds. Old Rifle Site Samples were collected at the Old Rifle site from eight monitoring wells and five surface locations in compliance with the December 2001 Groundwater Compliance Action Plan for the Old Rifle, Colorado, UMTRA Project Site (GJ0-2000-177-TAR). Analytes measured at the Old Rifle site included COCs (selenium, uranium, and vanadium), major cations, and major anions. Field measurements of total alkalinity, oxidation-reduction potential, pH, specific conductance, turbidity, temperature, were made at each location, and the water level was measured at each sampled well. The monitoring strategy described in the GCAP is designed to determine progress of the natural flushing process in meeting compliance standards for site COCs. Standards for selenium and vanadium are the proposed ACLs of0.05 mg/L and 1.0 mg/L, respectively. For uranium the cleanup goal is the UMTRA standard of 0.044 mg/L or background, whichever is higher. As shown in the time concentration graphs, the uranium concentration exceeds the cleanup goal at groundwater monitoring locations RF0-0304, -0305, -0310, -0655, and -0656. The surface water locations were sampled to monitor the impact of groundwater discharge at Colorado River surface water locations adjacent to (RF0-0396) and downgradient of the site (RF0-0741). COC concentrations remain low and consistent with historical concentrations as shown in the time-concentration graphs (Attachment 2), which indicate no impacts from groundwater discharge to the river.

2015 Old and New Rifle↗

Biokinetic models for Group VB elements

This paper reviews biokinetic data for the Group VB elements vanadium, niobium, and tantalum, and presents biokinetic models describing their systemic behaviour. The model for systemic niobium in adults was developed earlier and described in Publication 134 of the International Commission on Radiological Protection. The model for niobium is used as a starting point for the development of models for vanadium and tantalum. Published biokinetic data for vanadium, including comparisons with niobium, indicate that the initial distribution of vanadium is broadly similar to that of niobium but that vanadium is less firmly fixed in most tissues and is excreted more rapidly than niobium. Biokinetic data for tantalum are more limited but suggest that its systemic behaviour closely resembles that of niobium at early times after administration. The model for niobium is proposed for application to tantalum in view of the suggested biological similarities of tantalum and niobium, their generally strong coherence in nature due to similar ionic radii and identical valence states, and the difficulties in developing parameter values directly from available data for tantalum. In conclusion, the proposed model for vanadium relies largely on vanadium-specific information and varies considerably from the model for niobium.

61 RADIATION PROTECTION AND DOSIMETRY↗

Synthesis and structural, magnetic, thermal, and transport properties of several transition metal oxides and aresnides

Oxide compounds containing the transition metal vanadium (V) have attracted a lot of attention in the field of condensed matter physics owing to their exhibition of interesting properties including metal-insulator transitons, structural transitions, ferromagnetic and antiferromagnetic orderings, and heavy fermion behavior. Binary vanadium oxides VnO2n−1 where 2 ≤ n ≤ 9 have triclinic structures and exhibit metal-insulator and antiferromagnetic transitions.[1–6] The only exception is V7O13 which remains metallic down to 4 K.[7] The ternary vanadium oxide LiV2O4 has the normal spinel structure, is metallic, does not undergo magnetic ordering and exhibits heavy fermion behavior below 10 K.[8] CaV2O4 has an orthorhombic structure[9, 10] with the vanadium spins forming zigzag chains and has been suggested to be a model system to study the gapless chiral phase.[11, 12] These provide great motivation for further investigation of some known vanadium compounds as well as to explore new vanadium compounds in search of new physics. This thesis consists, in part, of experimental studies involving sample preparation and magnetic, transport, thermal, and xray measurements on some strongly correlated eletron systems containing the transition metal vanadium. The compounds studied are LiV2O4, YV4O8, and YbV4O8.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-Principles Integrated Adsorption Modeling for Selective Capture of Uranium from Seawater by Polyamidoxime Sorbent Materials

Nuclear power is a relatively carbon-free energy source that has the capacity to be utilized today in an effort to stem the tides of global warming. The growing demand for nuclear energy, however, could put significant strain on our uranium ore resources, and the mining activities utilized to extract that ore can leave behind long-term environmental damage. A potential solution to enhance the supply of uranium fuel is to recover uranium from seawater using amidoximated adsorbent fibers. This technology has been studied for decades but is currently plagued by the material’s relatively poor selectivity of uranium over its main competitor vanadium. In this work, we investigate the binding schemes between uranium, vanadium, and the amidoxime functional groups on the adsorbent surface. Using quantum chemical methods, binding strengths are approximated for a set of complexation reactions between uranium and vanadium with amidoxime functionalities. Those approximations are then coupled with a comprehensive aqueous adsorption model developed in this work to simulate the adsorption of uranium and vanadium under laboratory conditions. Experimental adsorption studies with uranium and vanadium over a wide pH range are performed, and the data collected are compared against simulation results to validate the model. It was found that coupling ab initio calculations with process level adsorption modeling provides accurate predictions of the adsorption capacity and selectivity of the sorbent materials. Furthermore, this work demonstrates that this multiscale modeling paradigm could be utilized to aid in the selection of superior ligands or ligand compositions for the selective capture of metal ions. Furthermore, this first-principles integrated modeling approach opens the door to the in silico design of next-generation adsorbents with potentially superior efficiency and selectivity for uranium over vanadium in seawater.

36 MATERIALS SCIENCE↗

Uranium Resource Recovery from Desalination Plant Feed and Reject Water Using Amidoxime Functionalized Adsorbent

With global demand for nuclear power expected to rise, new nuclear fuel resources must be explored to ensure the viability and sustainability of nuclear power. Uranium recovery from seawater is one potential source, though the low concentration of uranium in seawater is a significant obstacle. As a concentrate of seawater, desalination brine reject would have a significantly higher uranyl concentration. In this work, the adsorption of uranium and competing ions in brine reject is investigated. Adsorption experiments were performed over 84 days in 5-gallon batch tanks with amidoxime adsorbents and samples taken from the feed seawater and reverse osmosis brine reject of the Tampa Bay Desalination Plant. The aqueous concentration and adsorbed mass of uranium, zinc, copper, iron, vanadium, calcium, and magnesium were determined through inductively coupled plasma mass spectroscopy. Aqueous adsorption modeling was used to simulate speciation and adsorption of these ions under the experimental conditions. The adsorbed mass of uranium in seawater was 6.22 mg/g adsorbent which declined to 3.95 mg/g in brine. This is a result of increased competition from iron and vanadium whose adsorbed masses increased from 1.06 to 3.00 mg/g and 1.05 to 2.67 mg/g, respectively. Good agreement between experimental and predicted results was obtained for all ions in seawater. Uranium adsorption was overpredicted in brine which may be attributed to the presence of other competing ions and the system not being at equilibrium. Furthermore, results demonstrate that the influence of competing ions, such as those of iron and vanadium, on uranium adsorption would need to be reduced for brine reject to become a significant uranium resource.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Successful Coupling of a Bis-Amidoxime Uranophile with a Hydrophilic Backbone for Selective Uranium Sequestration

The amidoxime group (-RNH2NOH) has long been used to extract uranium from seawater on account of its high affinity toward uranium. The development of tunable sorbent materials for uranium sequestration remains a research priority as well as a significant challenge. Herein, we report the design, synthesis, and uranium sorption properties of bis-amidoxime-functionalized polymeric materials (BAP 1–3). Bifunctional amidoxime monomers were copolymerized with an acrylamide cross-linker to obtain bis-amidoxime incorporation as high as 2 mmol g–1 after five synthetic steps. The resulting sorbents were able to uptake nearly 600 mg of uranium per gram of polymer after 37 days of contact with a seawater simulant containing 8 ppm uranium. Moreover, the polymeric materials exhibited low vanadium uptake with a maximum capacity of 128 mg of vanadium per gram of polymer. This computationally predicted and experimentally realized selectivity of uranium over vanadium, nearly 5 to 1 w/w, is one of the highest reported to date and represents an advancement in the rational design of sorbent materials with high uptake capacity and selectivity.

36 MATERIALS SCIENCE↗

Synthesis and Exploratory Catalysis of 3d Metals: Group-Transfer Reactions, and the Activation and Functionalization of Small Molecules Including Greenhouse Gases

Our work over the past three years has resulted in the development of electron rich and low-coordinate vanadium fragments, molecular nitrides of vanadium and parent imide systems of titanium, and the synthesis of phosphorus containing molecules of the 3d transition metal series. Likewise, with financial support from BES Division in DOE (DE-FG02-07ER15893), we now completed the full characterization of the first single molecular magnet (SMM) of Fe(III). We demonstrated that this monomeric form of Fe(III) has an unusual slow relaxation of the magnetization under zero applied field. To make matters more interesting, this system also undergoes a rare example of an intermediate to high-spin transition (an S = 3/2 to S = 5/2 transition). In 2010 we reported the synthesis of the first neutral and low-coordinate vanadium complexes having the terminal nitride functionality. We have now completed a full study to understand formation of the nitride ligand from the metastable azide precursor, and have also explored the reactivity of the nitride ligand in the context of incomplete and complete N-atom transfer. During the 2010-2013 period we also discovered a facile approach to assemble low-coordinate and low-valent vanadium(II) complexes and exploit their multielectron chemistry ranging from 1-3 electrons. Consequently, we can now access 3d ligand frameworks such as cyclo-P3 (and its corresponding radical anion), nitride radical anions and cations, low-coordinate vanadium oxo’s, and the first example of a vanadium thionitrosyl complex. A cis-divacant iron(IV) imido having some ligand centered radical has been also discovered, and we are in the process of elucidating its electronic structure (in particular the sign of zero field splitting and the origin of its magnitude), bonding and reactivity. We have also revisited some paramagnetic and classic metallocene compounds with S >1/2 ground states in order to understand their reactivity patterns and electronic structure. Lastly, we are completing the synthesis and characterization of a titanium nitride anion and formation of the first example of boryl and aluminyl imido titanium complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding and Controlling Conductivity Transitions in Correlated Solids: Spectroscopic Studies of Electronic Structure in Vanadates (Final Report)

This research project is focused on synchrotron radiation based x-ray spectroscopic studies of the metal to insulator transition in vanadium oxides. In doing so, we developed a fundamental understanding of the origins of conductivity transitions in correlated electron materials. Conductivity transitions can be driven by external and internal mechanisms, including electric and magnetic fields, chemical doping, defects, disorder, pressure, dimensionality, and temperature. Vanadium oxides, and vanadium dioxide in particular, display particularly complex electronic phenomena. Binary vanadium oxides, and ternary oxides with substituted metal cations, exhibit a broad range of complex conductivity transitions, as well as charge ordering transitions, structural phase transitions, frustrated spin structures, superconductivity, and unusual magnetic properties. As such, vanadates are a prototypical class of correlated material, where fundamentally important physical themes can be explored, both experimentally and theoretically. The experimental tools used were soft x-ray emission spectroscopy (XES), soft x-ray absorption spectroscopy (XAS), resonant inelastic soft x ray scattering (RIXS), x-ray photoemission spectroscopy (XPS), angle resolved photoemission spectroscopy (ARPES), and spectroscopic photoemission low energy electron microscopy (SPELEEM). This broad range of techniques delivered data that was used to understand the electronic structure in these oxides. Vanadium oxides as single crystals, thin films, polycrystalline powders, and nanoparticles were studied to determine the influence of the physical structure the materials properties. A rich and varied selection of experiments were performed, and by combining the information gathered by our x-ray spectroscopic techniques, we developed a comprehensive understanding of electronic structure in vanadium oxides. We measured band structures and Fermi surfaces, studied the coupling between collective excitations and quasi-particles, measured the local, site and element specific electronic structure, as well as the cation charge state, measured orbital hybridization, and measured element specific low energy valence excitations such as dd* and charge transfer excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A study of microstructure of Fe-Cu-Ni-Sn and Fe-Cu-Ni-Sn-VN metal matrix for diamond containing composites

Highlights: • A nanocrystalline sample of coarse-grained powders of iron, copper, nickel, tin was obtained. • The structure of the sample consists of a supersaturated solid solution of nitrogen and vanadium in α-Fe. • Grain refinement occurs as a result of the decomposition of supersaturated solid solution of nitrogen and vanadium in α-Fe. To obtain bulk of 51Fe–32Cu–9Ni–8Sn and 49.47Fe–31.04Cu–8.73Ni–7.76Sn–3VN nanocomposites, a pressing method at room temperature and subsequent hot pressing in a vacuum was used. The microstructure of the sintered composites by X-ray diffraction and transmission electron microscopy was investigated. It is shown that in the 49.47Fe–31.04Cu–8.73Ni–7.76Sn–3VN composite there was a dissolution of vanadium nitride in γ‑iron and formation of a supersaturated solid solution of nitrogen and vanadium in the α‑iron. As a result, there was a substantial grinding of ferrite grains (from 5 to 50 μm to 20–400 nm) as compared to a sample without vanadium nitride (from 5 to 50 μm to 400–800 nm). Nanocomposites are considered as promising materials to create a new generation of diamond containing composites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Correlation of Structural Differences between Nafion/Polyaniline and Nafion/Polypyrrole Composite Membranes and Observed Transport Properties

Polyaniline/Nafion and polypyrrole/Nafion composite membranes, prepared by chemical polymerization, are studied by infrared and nuclear magnetic resonance spectroscopy, and scanning electron microscopy. Differences in vanadium ion diffusion through the membranes and in the membranes’ area specific resistance are linked to analytical observations that polyaniline and polypyrrole interact differently with Nafion. Polypyrrole, a weakly basic polymer, binds less strongly to the sulfonic acid groups of the Nafion membrane, and thus the hydrophobic polymer aggregates in the center of the Nafion channel rather than on the hydrophilic side chains of Nafion that contain sulfonic acid groups. This results in a drastically elevated membrane resistance and an only slightly decreased vanadium ion permeation compared to a Nafion membrane. Polyaniline on the other hand is a strongly basic polymer, which forms along the sidewalls of the Nafion pores and on the membrane surface, binding tightly to the sulfonic acid groups of Nafion. This leads to a more effective reduction in vanadium ion transport across the polyaniline/Nafion membranes and the increase in membrane resistance is less severe. The performance of selected polypyrrole/Nafion composite membranes is tested in a static vanadium redox cell. Increased coulombic efficiency, compared to a cell employing Nafion, further confirms the reduced vanadium ion transport through the composite membranes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Field emission of vertically aligned V{sub 2}O{sub 5} nanowires on an ITO surface prepared with gaseous transport

Growing V{sub 2}O{sub 5} nanowires (NWs) on a conducting glass substrate combines gaseous transport and pyrolytic deposition of vanadium polyoxometalate anions, and yields vertically aligned vanadium-oxide nanowires. Scanning electron and transmission electron microscopy, selected-area electron diffraction, Raman spectra and powder X-ray analyses indicate that V{sub 2}O{sub 5} nanowires as synthesized were single-crystalline and grew anisotropically among direction [010]. NH{sub 2}OH.HCl served not only as a reducing agent to produce vanadium polyoxometalate clusters but also as a source of NH{sub 3} gas to facilitate the vapor pyrolysis and deposition. The optical properties of V{sub 2}O{sub 5} nanowires exhibit a character dependent on structure. Field emission (FE) measurements show a small turn-on field voltage approx8.3 V/{mu}m, maximum current density 1.8 mA/cm{sup 2}, and a linear Fowler-Nordheim behavior. - Graphical abstract: Growing V{sub 2}O{sub 5} nanowires on a conducting glass substrate combines gaseous transport and pyrolytic deposition of vanadium polyoxometalate anions, and yields vertically aligned vanadium-oxide nanowires.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A tantalum strength model using a multiscale approach: version 2

A continuum strength model for tantalum was developed in 2007 using a multiscale approach. This was our first attempt at connecting simulation results from atomistic to continuum length scales, and much was learned that we were not able to incorporate into the model at that time. The tantalum model described in this report represents a second cut at pulling together multiscale simulation results into a continuum model. Insight gained in creating previous multiscale models for tantalum and vanadium was used to guide the model construction and functional relations for the present model. While the basic approach follows that of the vanadium model, there are significant departures. Some of the recommendations from the vanadium report were followed, but not all. Results from several new analysis techniques have not yet been incorporated due to technical difficulties. Molecular dynamics simulations of single dislocation motion at several temperatures suggested that the thermal activation barrier was temperature dependent. This dependency required additional temperature functions be included within the assumed Arrhenius relation. The combination of temperature dependent functions created a complex model with a non unique parameterization and extra model constants. The added complexity had no tangible benefits. The recommendation was to abandon the strict Arrhenius form and create a simpler curve fit to the molecular dynamics data for shear stress versus dislocation velocity. Functions relating dislocation velocity and applied shear stress were constructed vor vanadium for both edge and screw dislocations. However, an attempt to formulate a robust continuum constitutive model for vanadium using both dislocation populations was unsuccessful; the level of coupling achieved was inadequate to constrain the dislocation evolution properly. Since the behavior of BCC materials is typically assumed to be dominated by screw dislocations, the constitutive relations were ultimately built using only the screw relations. In light of this, the screw dislocation mobility relation is chosen as the starting point for the present tantalum model. Edge dislocations are not included explicitly in the current model. A significant change from the previous models is in the functional dependence of the dislocation evolution equations. The prior multiscale models assumed that the dislocation evolution rate depended on stress as well dislocation velocity. This crated an implicit dependence on the kinetic relation and required an iterative solution for the dislocation density. In the present model the integration scheme is simplified by casting the dislocation evolution terms of strain rate and current dislocation density. The final notable change was in the transition relation from the thermally activated regime to phonon drag. Historically, and in the prior models, this transition had been through a harmonic average on the strain rates making it impossible to determine the stress directly when given the plastic strain rate. After considering alternative transition relations, it was determined that an equally suitable fit to the molecular dynamics simulation data in the transition region could be constructed by averaging stresses rather than strain rates. The end result of these enhancements is a simpler (fewer parameters) and more straight forward model formulation where the material strength can be evaluated directly when given the plastic strain rate, temperature, pressure and the dislocation density at the beginning of the time step. This greatly improves the computational efficiency and robustness over the prior models where additional iteration loops were required.

36 MATERIALS SCIENCE↗

Crosslinked Polyethyleneimine Gel Polymer Interface to Improve Cycling Stability of RFBs

Redox flow batteries are considered a promising technology for grid energy storage. However, capacity decay caused by crossover of active materials is a universal challenge for many flow battery systems, which are based on various chemistries. In this paper, using the vanadium redox flow battery as an example, we demonstrate a new gel polymer interface (GPI) consisting of crosslinked polyethyleneimine with a large amount of amino and carboxylic acid groups introduced between the positive electrode and the membrane. The GPI functions as a key component to prevent vanadium ions from crossing the membrane, thus supporting stable long-term cycling. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were conducted to investigate the effect of GPI on the electrochemical properties of graphitic carbon electrodes (GCFs) and redox reaction of catholyte. X-ray photoelectron spectroscopy (XPS) and 1 H nuclear magnetic resonance (NMR) spectra demonstrated that the crosslinked GPI is chemically stable for 100 cycles without dissolution of polymers and swelling in the strong acidic electrolytes. Results from inductively coupled plasma mass spectrometry (ICP-MS), Fourier-transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray (EDX) spectroscopy proved that the GPI is effective in maintaining the concentration of vanadium species in their respective half-cells, resulting in improved cycling stability because of it prevents active species from crossing the membrane and stabilizes the oxidation states of active species.

Lim, Hyung-Seok↗

Freestanding Ammonium Vanadate Composite Cathodes with Lattice Self-Regulation and Ion Exchange for Long-Lasting Ca-Ion Batteries

Calcium-ion batteries (CIBs) have emerged as a promising alternative for electrochemical energy storage. The lack of high-performance cathode materials severely limits the development of CIBs. Vanadium oxides are particularly attractive as cathode materials for CIBs, and preinsertion chemistry is often used to improve their calcium storage performance. However, the room temperature cycling lifespan of vanadium oxides in organic electrolytes still falls short of 1000 cycles. Here, based on preinsertion chemistry, the cycling life of vanadium oxides is further improved by integrated electrode and electrolyte engineering. Utilizing a tailored Ca electrolyte, the constructed freestanding (NH 4 ) 2 V 6 O 16 ·1.35H 2 O@graphene oxide@carbon nanotube (NHVO-H@GO@CNT) composite cathode achieves a 305 mAh g -1 high capacity and 10 000 cycles record-long life. Additionally, for the first time, a Ca-ion hybrid capacitor full cell is assembled and delivers a capacity of 62.8 mAh g -1 . The calcium storage mechanism of NHVO-H@GO@CNT based on a two-phase reaction and the exchange of NH 4 + and Ca 2+ during cycling are revealed. The lattice self-regulation of V—O layers is observed and the layered vanadium oxides with Ca 2+ pillars formed by ion exchange exhibit higher capacity. This work provides novel strategies to enhance the calcium storage performance of vanadium oxides via integrated structural design of electrodes and electrolyte modification.

25 ENERGY STORAGE↗

High temperature (1200 C) ceramic-to-metal seal development

Two phases have been completed, of a program whose ultimate objective is the development of an alkali metal resistant, thermal shock resistant, leak-tight, and neutron radiation resistant ceramic-to-metal seal capable of operation at 1200 C for three to five years. The first phase involved the screening of platinum-base, vanadium-base and vanadium-niobium base brazes for the joining of Cb-1Zr or T-111 alloys to high purity alumina. The second phase involved studies of the performance of sealed capsule samples during 5000-hour aging tests at 800, 1000, and 1200 C in high vacuum. Sealed capsules which were made using pure vanadium braze, and were brazed at 1850 C for one minute, survived 64 thermal cycles to 1200 C at the heating/cooling rate of 100 C/minute. Vanadium braze samples survived 5000-hour aging tests at 800, 1000, and 1200 C. One thermally cycled sample survived a subsequent 5000-hour aging period at 1000 C, but another, at 1200 C, did not survive. It was concluded that a pure vanadium braze used to bond high purity alumina to Cb-1Zr alloy is the best of the systems studied, but that additional studies must be performed to establish its service temperature limitations for the desired three to five years' service.

Mckisson, R. L.↗

Ceramic oxide reactions with V2O5 and SO3

Ceramic oxides are not inert in combustion environments, but can react with, inter alia, SO3, and Na2SO4 to yield low melting mixed sulfate eutectics, and with vanadium compounds to produce vanadates. Assuming ceramic degradation to become severe only when molten phases are generated in the surface salt (as found for metallic hot corrosion), the reactivity of ceramic oxides can be quantified by determining the SO3 partial pressure necessary for molten mixed sulfate formation with Na2SO3. Vanadium pentoxide is an acidic oxide that reacts with Na2O, SO3, and the different ceramic oxides in a series of Lux-Flood type of acid-base displacement reactions. To elucidate the various possible vanadium compound-ceramic oxide interactions, a study was made of the reactions of a matrix involving, on the one axis, ceramix oxides of increasing acidity, and on the other axis, vanadium compounds of increasing acidity. Resistance to vanadium compound reaction increased as the oxide acidity increased. Oxides more acidic than ZrO2 displaced V2O5. Examination of Y2O3- and CeO2-stabilized ZrO2 sintered ceramics which were degraded in 700 C NaVO3 has shown good agreement with the reactions predicted above, except that the CeO2-ZrO2 ceramic appears to be inexplicably degraded by NaVO3.

Jones, R. L.↗

Experimental Study on the Formation of V-Rich Spinel Phase in CaO-SiO{sub 2}-MgO-FeO{sub t}-Al{sub 2}O{sub 3}-V{sub 2}O{sub 3}-P{sub 2}O{sub 5} Slags at 1573 K (1300 °C)

To concentrate vanadium dissolved in steelmaking slag and to separate the obtained vanadium (V)-concentrating phase by a magnetic method, the mineral phases in a CaO-SiO{sub 2}-MgO-FeO{sub t}-Al{sub 2}O{sub 3}-V{sub 2}O{sub 3}-P{sub 2}O{sub 5} system at 1573 K (1300 °C) were characterized by scanning-electron microscopy-energy-dispersive spectroscopy and X-ray diffractometry. When the samples were equilibrated in a pure iron crucible and argon atmosphere, four phases were identified, namely, orthosilicate, V-bearing spinel, wüstite, and a glass phase. The orthosilicate, V-bearing spinel, and glass phase occurred in all samples, whereas wüstite appeared only in samples with a higher basicity or high FeO{sub t} content. The results indicate that the V-bearing spinel phase, which is analogous to Fe{sub 3}O{sub 4}, is a thermodynamically stable phase that is suitable for the enrichment of vanadium dissolved in slags. Further analysis reveals that the increases in contents of FeO{sub t} and MgO in slag favor spinel-phase formation. When the slags are saturated by the wüstite phase, almost all dissolved vanadium can be concentrated in the spinel phase.

36 MATERIALS SCIENCE↗

Novel building units with bimetallic rings in inorganic/organic hybrid chains and layers

Hydrothermal synthesis has produced three new compounds constructed from novel building units containing vanadium-oxide (or oxyfluoride) subunits linked together via covalently bound cationic copper complexes. Each new compound exhibits novel structural features: [Cu(dipa)][VOF{sub 4}] (1) incorporates a corner-sharing octahedral vanadium(IV) oxyfluoride chain decorated by copper-(2,2'-dipyridyl amine) complexes which form intra-chain bridges. Within a similar reactant system [Cu(dipa)]{sub 2}[V{sub 6}O{sub 17}] (2) is produced, the structure of which exhibits edge-sharing trigonal bipyramidal vanadium(V) 'ladder-like' double chains which are bridged into layers by tetrahedral pyrovanadate dimers together with the copper-(2,2'-dipyridyl amine) complexes. [Cu(py){sub 4}]{sub 2}[V{sub 4}O{sub 12}] (3), is a 2-D structure featuring exclusively tetrahedral vanadium(V) in four-membered ring building blocks, linked through octahedral copper-pyridine complexes to form two crystallographically different bimetallic layers. - Graphical abstract: Hydrothermal synthesis is used to prepare hybrid mixed metal oxides and oxyfluorides with novel extended connectivities

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗