Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “traffic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Preliminary Benefits Assessment of Traffic Aware Strategic Aircrew Requests (TASAR)

While en route, aircrews submit trajectory change requests to air traffic control (ATC) to better meet their objectives including reduced delays, reduced fuel burn, and passenger comfort. Aircrew requests are currently made with limited to no information on surrounding traffic. Consequently, these requests are uninformed about a key ATC objective, ensuring traffic separation, and therefore less likely to be accepted than requests informed by surrounding traffic and that avoids creating conflicts. This paper studies the benefits of providing aircrews with on-board decision support to generate optimized trajectory requests that are probed and cleared of known separation violations prior to issuing the request to ATC. These informed requests are referred to as traffic aware strategic aircrew requests (TASAR) and leverage traffic surveillance information available through Automatic Dependent Surveillance Broadcast (ADS-B) In capability. Preliminary fast-time simulation results show increased benefits with longer stage lengths since beneficial trajectory changes can be applied over a longer distance. Also, larger benefits were experienced between large hub airports as compared to other airport sizes. On average, an aircraft equipped with TASAR reduced its travel time by about one to four minutes per operation and fuel burn by about 50 to 550 lbs per operation depending on the objective of the aircrew (time, fuel, or weighted combination of time and fuel), class of airspace user, and aircraft type. These preliminary results are based on analysis of approximately one week of traffic in July 2012 and additional analysis is planned on a larger data set to confirm these initial findings.

Henderson, Jeff↗
NASA NTRSDate not supplied

An Investigation Into Transecting Satellites in Future Space Traffic Management Scenarios

The number of satellites expected to populate the near-Earth space environment is set to dramatically increase in the coming decade as new large constellations are approved and deployed. Current strategies for deploying new batches of these satellites often involve launching into an initial orbit, and then performing apogee raising maneuvers to reach a target altitude. Similarly, end-of-life planning for these constellation satellites can consist of de-orbit burns that lower perigee to permit disposal via re-entry. Both the raising and de-orbiting maneuvers can result in the individual satellites traveling in transecting orbits that have the potential to cross other spacecraft trajectories. While individual large constellations may be able to coexist in separate altitude and inclination bands, having thousands of satellites moving between these bands as new satellites are added and old satellites are removed could pose additional collision risks. Similar concerns have been raised regarding the impact that large numbers of university-class CubeSats might have in terms of their overall collision risk, especially as these satellites typically do not have propulsion systems for active maneuvering. To assess the impact that transecting satellites might have on future space traffic management strategies, this study explored a variety of realistic future scenarios using a high-fidelity simulation tool. The model can simulate the orbit of tens of thousands of resident space objects (RSOs) simultaneously, to include active satellites, debris, rocket bodies, or even future hypothetical satellite constellations, using a realistic force model that incorporates non-spherical gravity, atmospheric drag, and solar radiation pressure, as well as station-keeping. The simulation can be customized to accommodate different methods of calculating the probability of collision, as well as the process for determining probability ellipsoids and screening volumes. This makes it possible to replicate, and compare, different processes used by different spacecraft operators and space situational awareness (SSA) providers. As the model is run forward in time, each conjunction event is recorded, allowing for the analysis of statistics and meta-data related to these events, providing insight into the nature and frequency of potential collisions, such as whether are they active or passive objects, what size are the two objects, and who owns the objects (if known). This information makes it possible to characterize how changes to the status quo affect the number and type of conjunctions that occur, as well as the distributional effects on various types of satellite operators. To assess the general risks that transecting satellites might pose for hypothetical future space object environments, approximately 60,000 new large constellation satellites were considered, in addition to the existing catalog of approximately 7800 known resident space objects (RSOs), over a simulation period of one year. The results indicate that the future space environment will introduce a non-linear increase in conjunction events as the number of RSOs also increase. This will require adjustments to spacecraft fuel budgets in order to conduct the avoidance maneuvers necessary to minimize collision risk, both for existing and new satellites. This increase is due in large part to the higher density of RSOs and the overlap between some constellation orbits. Current catalog objects were shown to require three times more ∆V for collision avoidance (CA) maneuvers in the simulated future environment, and some constellation spacecraft were estimated to devote the majority of their annual ∆V to CA. The impact of small satellites was found to be proportional for the current space environment, and actually decreased in terms of percentage for the future scenario, suggesting that small satellites do not pose an outsized collision risk. Lastly, transecting satellites were found to contribute thousands of additional conjunctions outside of their operational orbit, and may require up to an additional 5% in CA maneuver fuel allocation.

conjunction assessment↗
NASA NTRS2018

Required Time of Arrival as a Control Mechanism to Mitigate Uncertainty in Arrival Traffic Demand Management

The objective of this study is to explore the use of Required Time of Arrival (RTA) capability on the flight deck as a control mechanism on arrival traffic management to improve traffic delivery accuracy by mitigating the effect of traffic demand uncertainty. The uncertainties are caused by various factors, such as departure error due to the difference between scheduled departure and the actual take-off time. A simulation study was conducted using the Multi Aircraft Control System (MACS) software, a comprehensive research platform developed in the Airspace Operations Laboratory (AOL) at NASA Ames Research Center. The Crossing Time (CT) performance (i.e. the difference between target crossing time and actual crossing time) of the RTA for uncertainty mitigation during cruise phase was evaluated under the influence of varying two main factors: wind severity (heavy wind vs. mild wind), and wind error (1 hour, 2 hours, and 5 hours wind forecast errors). To examine the CT performance improvement made by the RTA, the comparison to the CT of the aircraft that were not assigned with RTA (Non-RTA) under the influence of the selected factors was also made. The Newark Liberty International Airport (EWR) was chosen for this study. A total 66 inbound traffic to the EWR (34 of them were airborne when the simulation was initiated, 32 were pre-departures at that time) was simulated, where the pre-scripted departure error was assigned to each pre-departure (61 conform to their Expected Departure Clearance Time, which is +-300 seconds of their scheduled departure time). The results of the study show that the delivery accuracy improvement can be achieved by assigning RTA, regardless of the influence of the selected two factors (the wind severity and the wind information inaccuracy). Across all wind variances, 66.9 (265 out of 396) of the CT performance of the RTA assigned aircraft was within +- 60 seconds (i.e. target tolerance range) and 88.9 (352 out of 396) aircraft met +-300 seconds marginal tolerance range, while only 33.6 (133 out of 396) of the Non-RTA assigned aircrafts CT performance achieved the target tolerance range and 75.5 (299 out of 396) stayed within the marginal. Examination of the impact of different error sources i.e. departure error, wind severity, and wind error suggest that although large departure errors can significantly impact the CT performance, the impacts of wind severity and errors were modest relative the targeted +- 60 second conformance range.

required time of arrival (RTA)↗
NASA NTRS2010

Ground-Ground Data Communication-Assisted Planning and Coordination: Shorter Verbal Communications

A human-in-the-loop simulation was conducted to investigate the operational feasibility, technical requirements, and potential improvement in airspace efficiency of adding a Multi-Sector Planner position. A subset of the data from that simulation is analyzed here to determine the impact, if any, of ground-ground data communication (Data Comm) on verbal communication and coordination for multi-sector air traffic management. The results suggest that the use of Data Comm significantly decreases the duration of individual verbal communications. The results also suggest that the use of Data Comm, as instantiated in the current simulation, does not obviate the need for accompanying voice calls.

Kessell, Angela Mary↗
DOE OSTI2025

Optimizing Traffic Signal Control to Enhance Transportation Efficiency and Maximize Pedestrian Benefits in the Road Network

Increasing urban mobility requirements demand efficient transportation system strategies for both vehicular and pedestrian movement. This study enhances the Decentralized Graph-based Multi-Agent Reinforcement Learning (DGMARL) approach, originally tailored for vehicular traffic signal timing, to incorporate pedestrian traffic dynamics. The improved algorithm considers crucial metrics such as Eco_PI, assesses vehicle fuel consumption by factoring in stops and delays, and addresses pedestrian waiting time, crucial for system efficiency while acknowledging driver waiting time impact. Utilizing Digital Twin simulation along the MLK Smart Corridor in Chattanooga, Tennessee, the algorithm's performance is compared for various pedestrian control scenarios. To evaluate the effectiveness of DGMARL, this study compared DGMARL-enabled signal management with automated pedestrian traffic detection and an actuated signal management system (real-word baseline) with pedestrian recall, which predetermingly enforces a pedestrian phase every cycle. Findings indicate substantial improvements with DGMARL, showing a 28.29% enhancement in vehicle Eco_PI, a 60.55 % reduction in pedestrian waiting time, and a 55.74% decrease in driver stop delay, on average, compared to the baseline actuated signal timing plan.

Kumarasamy, Vijayalakshmi K [The University of Ten↗
NASA NTRS2015

Pilot Evaluation of a UAS Detect-and-Avoid System's Effectiveness in Remaining Well Clear

Unmanned aircraft will equip with a detect-and-avoid (DAA) system that allows them to comply with the requirement to see and avoid other aircraft, an important layer in the overall set of procedural, strategic and tactical separation methods designed to prevent mid-air collisions. Although the effectiveness of the DAA system will be set to a minimum threshold by regulators, different combinations of algorithms, displays and procedures could be used to meet that minimum. The research presented in this paper indicates the effectiveness of the combined pilot-DAA system as a function of the DAA design requirements and provides data that may be used to model the behavior of pilots when employing such systems. Over the course of two simulations 21 professional UAS pilots evaluated eight different DAA system designs and metrics were collected on their ability to maintain the well clear separation standard. The independent variables were the time horizon at which pilots were alerted to potential losses of well clear, the location of the traffic display, and the tools and informational elements available on the display to aid the pilot in detecting and resolving those potential losses. In the second experiment the UAS encountered two categories of aircraft: those equipped with simulated transponders that could be seen dozens of miles away and those without that were only detectable by a simulated radar within a range of six nautical miles. The data indicate that integrating the traffic display with the primary mission map directly in front of the pilot reduced the frequency of losses of well clear. Improved detection and resolution tools, including explicit maneuver guidance and a trial planning capability, had less of an effect in reducing the frequency of losses but significantly reduced the time in loss when they occurred. The amount of warning time provided to the pilot had a strong effect on their ability to remain well clear: when alerts were first presented with less than about 15 seconds to a predicted loss of well clear pilots were able to maneuver successfully in only 26 percent of encounters, whereas they were about 83 percent successful when they had more than 15 seconds. Pilots' ability to separate from the two categories of aircraft was nearly the same after accounting for the amount of alert time provided in each encounter, although the limited surveillance volume for the non-transponder equipped aircraft meant alerts tended to occur later and therefore were more difficult to resolve.

loss of well clear↗
NASA NTRS1988

Landing-Time-Controlled Management Of Air Traffic

Conceptual system controls aircraft with old and new guidance equipment. Report begins with overview of concept, then reviews controller-interactive simulations. Describes fuel-conservative-trajectory algorithm, based on equations of motion for controlling landing time. Finally, presents results of piloted simulations.

Erzberger, Heinz↗
NASA NTRSDate not supplied

DANTi: A Tool for Assistive Detect and Avoid Research

This paper presents DANTi, a research tool developed at NASA Langley Research Center to support the validation of Assistive Detect and Avoid (ADAA) requirements for General Aviation (GA). ADAA is a future on-board aircraft technology intended to augment a pilot’s see-and-avoid capability by helping them identify and resolve traffic conflicts earlier and more efficiently. DANTi includes a realistic Electronic Flight Bag (EFB) display and a fast-time simulation environment that can be fully customized to meet different research requirements. DANTi is currently used within NASA efforts such as the Air Mobility Pathfinders project on future air transportation systems and a joint NASA/FAA Laboratory Integrated Test Environment (NFLITE) on next-generation airspace operations in urban environments. These efforts investigate ADAA requirements in advanced urban air mobility settings where new aircraft types, new services, and new traffic patterns will be integrated in an overall crowded airspace.

Detect and Avoid↗
NASA NTRS2022

Evaluation and Improvement of System-of-Systems Resilience in a Simulation of Wildfire Emergency Response

Because of the increasing threat that wildfires pose, there is interest in leveraging new technologies to improve firefighting. Specifically, Unmanned Aerial Systems (UAS) and UAS Traffic Management (UTM) promise to improve firefighters’ situational awareness, coordination, communications, safety, and strategy. While these technologies could be beneficial, there has been little formal investigation into how much benefit would occur and whether these benefits would outweigh hazards introduced by these systems. To better understand the impacts of these technologies, this paper presents a high-level dynamic simulation for evaluating wildfire response performance and resilience incorporating fire propagation, surveillance and communication, response planning, and the resulting mitigation actions. This simulation is then used to study the impact of communications and surveillance improvement, considering (1) the effect on fire containment and ground crew injuries and (2) the effect of introduced and existing disruptive fault scenarios. Simulating this model over a large number of scenarios finds that these changes can improve containment and reduce ground crew injuries. While these improvements generalize over both existing and introduced single-fault scenarios and thus result in a more resilient system, they could be negated if the introduced communications infrastructure is prone to full-scale outages.

modeling↗
NASA NTRS1984

Conceptual design and simulator implementation of an automatic terminal approach system

The pilot-machine interface with aircraft automation to increase the safety and utility of single-pilot IFR (instrument flight rules) operations is addressed. An automatic terminal approach system (ATAS), that uses stored instrument approach data to automatically tune aircraft radios and control the aircraft autopilot, was conceived as a means of improving this critical interface. The ATAS automatically flies instrument approach procedures, including the missed approach, and provides for easy pilot interaction to accommodate air traffic control radar vectors and altitude assignments. A research prototype of an ATAS was developed to the extent necessary for a simulation implementation and piloted evaluation. The development of the ATAS concept and the software algorithms is described.

Hinton, D. A.↗
NASA NTRS2018

Air Traffic Management-eXploration Testbed for Urban Air Mobility Research and Development

The presentation will describe the architecture, current capabilities and some future enhancements of the testbed that is being developed at the National Aeronautics and Space Administration (NASA) to enable benefit, impact, safety and cost assessments for accelerating the deployment of air traffic management concept and technologies in the national airspace system. The testbed will support analysis of operational feasibility of urban air mobility operations, a part of NASA's Air Traffic Management eXploration project, and provide the data needed by regulatory agencies charged with public safety. Introduction of concepts and technologies, especially new concepts and technologies, is difficult and often takes decades because of the inability to assess the operational impact of the interaction between the proposed concept and technology and operationally deployed systems in terms of system-wide safety, traffic flow efficiency, roles and workload of controllers and traffic managers, and impact on airlines and other operators. To overcome these limitations, the testbed is developing infrastructure to enable mathematical modeling, human-in-the-loop evaluations and testing with operational systems in a simulated environment. In addition to the difficulty of establishing communications between geographically distributed systems, downloading/installing software, and management of startup, error-handling and shutdown, a major impediment for conducting simulations and human-in-the-loop testing with operational systems is the tedious manual scenario generation process. Several of these difficulties have been addressed in the current state of the testbed. The testbed can be described in terms of the following elements (1) web-based frontend and backend, (2) Testbed Builder, (3) Data Distribution Service, (4) Component Library, (5) Simulation Management, and (6) Scenario Generation. The web-based frontend and backend enable the user to interact with the testbed for tasks such as composing a simulation, running a simulation and retrieving output data. The Testbed Builder application launched from the web frontend is a graphical user interface for the user to drag-and-drop and connect predefined blocks for composing a simulation/scenario generation task. The Builder writes a set of instructions for Simulation Management based on the links between the blocks and the block properties such as the component (executable) associated with a particular block. Management of the distributed simulation is accomplished by Execution and Component Managers. Execution Manager interprets the instructions provided by the Builder to instruct the Component Managers to download components from the Component Library to specified computers and to start them up. Once started, the components communicate with each other by publishing messages and subscribing to messages that are delivered by the Data Distribution Service. The Scenario Generation capability can be used for creating traffic scenarios for Multi-Aircraft Control System, which has been used extensively at NASA for human-in-the-loop-based concept evaluations. The presentation will provide a testbed enabled example scenario of Multi-Aircraft Control System based simulation in which the urban air mobility pilot using the conflict detection and resolution system would interact with the air traffic controllers for resolving conflicts with other aircraft during terminal area operations.

Testbed↗
NASA NTRS1980

Evaluation of the potential format and content of a cockpit display of traffic information

The types and formats of information most suitable to be displayed in a cockpit display of traffic information (CDTI) are investigated. Twenty three airline pilots and 13 instrumentated general aviation pilots were asked to select from sets of symbols of various complexities incorporating various levels of information that would contain all information necessary for monitoring the traffic situation, detecting errors, maintaining separation and merging. Display features selected by a significant number of pilots were then evaluated for their capabilities in helping pilots to assess the lateral or vertical separation between their own and another aircraft in a dynamic simulation. It is found that while some of the features initially chosen by the pilots, such as flightpath predictors, aided the pilots in perceiving the traffic situation correctly, others, such as ground speed and climb/descend arrows and relative altitude encoding of symbols for other aircraft, did not contribute to improved performance speed or accuracy.

Hart, S. G.↗
DOE OSTI2026

Autonomie Simulation Datasets in Support of U.S. DOT-NHTSA Advanced Vehicle Technology Research

Understanding how new vehicle technologies affect fuel economy and energy use is critical to the regulatory work performed by the U.S. Department of Transportation’s National Highway Traffic Safety Administration (NHTSA), which sets Corporate Average Fuel Economy (CAFE) standards under the Energy Policy and Conservation Act of 1975. In order to support this work, Argonne National Laboratory uses Autonomie, a full-vehicle simulation tool, to evaluate advanced powertrain architectures and their effects on vehicle energy consumption and performance. A wide range of vehicle classes has been assessed (i.e., internal combustion engine vehicles, hybrid electric vehicles, plug-in hybrid electric vehicles, battery-electric vehicles, and fuel cell electric vehicles), as well as the effects of various technology improvements such as lightweighting, aerodynamic refinements, and low-rolling-resistance tires. Simulations have been run across multiple drive cycles to capture fuel and electricity use under realistic operating conditions. The resulting datasets include detailed vehicle-level results, model assumptions, and validation reports, all of which have been made publicly available through NHTSA in support of the 2023 notice of proposed rulemaking covering light-duty vehicles for model years 2027 to 2035. These data are critical to stakeholders working in fuel economy regulation, vehicle technology assessment, and energy policy analysis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1998

FPGA Based Reconfigurable ATM Switch Test Bed

Various issues associated with "FPGA Based Reconfigurable ATM Switch Test Bed" are presented in viewgraph form. Specific topics include: 1) Network performance evaluation; 2) traditional approaches; 3) software simulation; 4) hardware emulation; 5) test bed highlights; 6) design environment; 7) test bed architecture; 8) abstract sheared-memory switch; 9) detailed switch diagram; 10) traffic generator; 11) data collection circuit and user interface; 12) initial results; and 13) the following conclusions: Advances in FPGA make hardware emulation feasible for performance evaluation, hardware emulation can provide several orders of magnitude speed-up over software simulation; due to the complexity of hardware synthesis process, development in emulation is much more difficult than simulation and requires knowledge in both networks and digital design.

Chu, Pong P.↗
NASA NTRS2015

Characteristics of a Well Clear Definition and Alerting Criteria for Encounters Between UAS and Manned Aircraft in Class E Airspace

Unmanned aircraft systems (UAS) will be required to equip with a detect-and-avoid (DAA) system in order to satisfy the federal aviation regulations to remain well clear of other aircraft. For a DAA system to satisfy the requirement to stay well clear of other airborne traffic, a quantitative definition of well clear needs to be defined and evaluated. This study investigates the implications of UAS using proposed well clear definitions as a separation standard for conducting operations in the National Airspace System (NAS). The first analysis considers three well clear definitions and presents the relative state conditions of intruder aircraft as they encroach upon the well clear boundary. The second analysis focuses on the definition of the alerting criteria needed to inform the UAS operator of a potential loss of well clear. All analyses are conducted in a NAS-wide fast-time simulation environment using UAS aircraft models, proposed UAS missions, and historical air defense radar data to populate the background traffic operating under visual flight rules. The results presented in this study inform the safety case, requirements development, and the operational environment for DAA minimum operational performance standards.

Safety↗
NASA NTRS1972

A dynamic response and eye scanning data base useful in the development of theories and methods for the description of control/display relationships

A set of specially prepared digital tapes is reported which contain synchronized measurements of pilot scanning behavior, control response, and vehicle response obtained during instrument landing system approaches made in a fixed-base DC-8 transport simulator. The objective of the master tape is to provide a common data base which can be used by the research community to test theories, models, and methods for describing and analyzing control/display relations and interactions. The experimental conditions and tasks used to obtain the data and the detailed format of the tapes are described. Conventional instrument panel and controls were used, with simulated vertical gust and glide slope beam bend forcing functions. Continuous pilot eye fixations and scan traffic on the panel were measured. Both flight director and standard localizer/glide slope types of approaches were made, with both fixed and variable instrument range sensitivities.

Klein, R.↗
NASA NTRS1981

A flight investigation of simulated data-link communications during single-pilot IFR flight. Volume 1: Experimental design and initial test

A Flight Data Console simulation of a digital communication link to replace the current voice communication system used in air traffic control (ATC) was developed. The study determined how a digital communications system reduces cockpit workload, improve, flight proficiency, and is acceptable to general aviation pilots. It is shown that instrument flight, including approach and landing, can be accomplished by using a digital data link system for ATC communication.

Parker, J. F., Jr.↗
NASA NTRS1982

A flight investigation of simulated data-link communications during single-pilot IFR flight. Volume 2: Flight evaluations

Key problems in single pilot instrument flight operations are in the management of flight data and the processing of cockpit information during conditions of heavy workload. A flight data console was developed to allow simulation of a digital data link to replace the current voice communications stem used in air traffic control. This is a human factors evaluation of a data link communications system to determine how such a system might reduce cockpit workload, improve flight proficiency, and be accepted by general aviation pilots. The need for a voice channel as backup to a digital link is examined. The evaluations cover both airport terminal area operations and full mission instrument flight. Results show that general aviation pilots operate well with a digital data link communications system. The findings indicate that a data link system for pilot/ATC communications, with a backup voice channel, is well accepted by general aviation pilots and is considered to be safer, more efficient, and result in less workload than the current voice system.

Parker, J. F., Jr.↗