SEARCH · Engineering Papers

Results for “three phase modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Prediction of s ± -Wave Superconductivity Enhanced by Electronic Doping in Trilayer Nickelates La 4 Ni 3 O 10 under Pressure

Motivated by the recently reported signatures of superconductivity in trilayer La 4 ⁢Ni 3 ⁢O 10 under pressure, here we comprehensively study this system using ab initio and random-phase approximation techniques. Without electronic interactions, the Ni d 3z 2 –r 2 orbitals show a bonding-antibonding and nonbonding splitting behavior via the O p z orbitals inducing a “trimer” lattice in La 4⁢ Ni 3 ⁢O 10 , analogous to the dimers of La 3 ⁢Ni 2 ⁢O 7 . The Fermi surface consists of three electron sheets with mixed e g orbitals, and a hole and an electron pocket made up of the d 3⁢z 2 –r 2 orbital, suggesting a Ni two-orbital minimum model. In addition, we find that superconducting pairing is induced in the s ± -wave channel due to partial nesting between the M = (π,π) centered pockets and portions of the Fermi surface centered at the Γ = (0,0) point. With changing electronic density n, the s ± instability remains leading and its pairing strength shows a domelike behavior with a maximum around n = 4.2 ( ~6.7% electron doping). The superconducting instability disappears at the same electronic density as that in the new 1313 stacking La 3 ⁢Ni 2 ⁢O 7 , correlated with the vanishing of the hole pocket that arises from the trilayer sublattice, suggesting that the high-T c superconductivity of La 3⁢ Ni 2 ⁢O 7 does not originate from a trilayer and monolayer structure. Furthermore, we confirm the experimentally proposed spin state in La 4 ⁢Ni 3 ⁢O 10 with an in-plane (π, π) order and antiferromagnetic coupling between the top and bottom Ni layers, and spin zero in the middle layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Microstructure Experiments-Enabled MARMOT Simulations of SiC/SiC-based Accident Tolerant Nuclear Fuel System

We have undertaken an experimental-computational project that addresses a few key technology gaps associated with the use of SiC/SiC composites for light water reactor fuel cladding. Two principal endeavors in this project are to assess the irradiation-induced microstructural changes and swelling in SiC/SiC composites, and to characterize and model the porous oxide surface layer (when exposed to steam) along SiC recession that is detrimental to the clad integrity under accident conditions. The project tasks are: (i) ion irradiation and characterization (University of Tennessee, Knoxville), (ii) mechanical tests and analysis (University of South Carolina), (iii) steam exposure tests (Oak Ridge National Laboratory), (iv) electron microscopy and spectroscopic characterization (NC State University), (v) x-ray microscopy and reconstruction (University of South Carolina and NC State University), (vi) phase field modeling and simulations (NC State University and Idaho National Laboratory). The effects of 10 MeV Au ion irradiation at 350°C on the microstructure evolution in SiC/SiC composites are investigated at doses up to 400 displacements per atom (dpa) at the University of Tennessee, Knoxville. Atomic force microscopy and optical profilometry reveal irradiation induced axial and radial shrinkage of the fibers for doses greater than 10 dpa. Based on detailed electron microscopy characterization, the primary cause of the fiber shrinkage is attributed to irradiation-induced loss of carbon packets. Additionally, the multilayer PyC interface is observed to portray high resistance to irradiation damage. The mechanical response and failure mechanisms of un-irradiated samples is also assessed through loading tests and X-ray imaging at the University of South Carolina. Steam exposure tests are performed at the Oak Ridge National Laboratory in a facility that represents a reactor pressure vessel under a loss-of-coolant-accident scenario. The samples that are analyzed methodically in this report are tested for 32/31 hours at 1200°C with a velocity of 0.25 cm/s for the pressures: 0.1 MPa, 0.45 MPa, 0.92 MPa and 1.38 MPa. Scanning/transmission electron microscopy analysis conducted at the NC State University (NCSU) shows that the oxide layer thickness increases with the steam pressure. While the oxide layer is crystalline (α- cristobalite) for the pressures 0.45 MPa, 0.92 MPa and 1.38 MPa, the layer is amorphous at 0.1 MPa. Results from Raman spectroscopy have also confirmed the formation of α-cristobalite phase of SiO₂. The abrupt increase in the integrated Raman intensity ratio between steam pressures 0.1 and 0.45 MPa suggests the onset of accelerated crystallization. Non-destructive three dimensional X-ray microscopy/tomography (XCT) and computational image processing techniques are employed by the University of South Carolina to probe the porous oxidation features on SiC samples at varying pressures. Interestingly, most pores are observed to be located away from the surface as well as the oxide-SiC interface. The average oxide layer thickness assessed from the XCT analysis is seen to be in excellent agreement with the values determined through scanning electron microscopy analysis for the highest pressures where the oxide layer is relatively more uniform. A phase-field model developed by the NC State University and Idaho National Laboratory for simulating oxidation of SiC by steam captures the paralinear kinetics of SiC oxidation with a high degree of fidelity. Results from quasi-one-dimensional and two dimensional simulations show that the pores with oxidizing species lead to a higher volatilization rate. These simulations indicate that the enhanced apparent volatilization rates at higher pressures observed in experiments can be rationalized by the increased volatilization from the pores. The project team has also successfully developed the capability to import images from experiments for realistic evolution of the oxidizing microstructure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Predicting phase transitions in PbTi⁢O 3 using zentropy through quasiharmonic phonon calculations

According to x-ray diffraction (XRD) measurements, PbTi⁢O 3 undergoes a phase transition from a tetragonal ferroelectric (FE) phase to a cubic paraelectric phase at 763 K. However, x-ray absorption fine-structure (XAFS) measurements indicate that PbTi⁢O 3 is locally tetragonal even after the phase transition. The difference in these results is because XAFS measurements can probe local features of a structure, while XRD averages over such local features. For both measurements to be consistent, PbTi⁢O 3 is macroscopically cubic but locally tetragonal after the phase transition. Despite this, most models, such as the Landau-Ginsburg-Devonshire theory and effective Hamiltonians, are still unable to explain this phenomenon. Moreover, these methods involve model parameters fitted to experimental or theoretical data and do not consider other tetragonal configurations, such as domain walls, to predict the phase transition. In our previous study, we used our zentropy approach to predict the phase transition by considering the tetragonal FE ground-state configuration and the tetragonal 90° and 180° domain wall configurations with their total energies at 0 K. Here, in this paper, the Helmholtz energies of the three configurations are obtained from density functional theory calculations through energy-volume curves and phonon calculations. The predicted phase transition temperature using the meta-GGA 𝑟 2⁢ SCAN and revised multiplicities of configurations is 716 K, showing good agreement with the experimental value of 763 K.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Materials Characterization, Prediction, and Control Project: Summary Report on Material Characterization, Part 2

The Pacific Northwest National Laboratory (PNNL) undertook the Materials Characterization, Prediction, and Control (MCPC) Laboratory Directed Research and Development Project to advance understanding of nuclear material processing and enable multifold acceleration in the development and qualification of new material systems in national security and advanced energy applications (Smith 2021). The MCPC Project executed research across three scientific vertices—material characterization, predictive modeling, and data analytics—with extensive support by a data curation and management team. The central technical objective in the MCPC Project was to improve the prediction and characterization of the process-structure-property relationships within the microstructurally refined region of stainless-steel samples prepared utilizing friction stir processing (FSP). Application of the FSP technique is well established at PNNL within the Solid Phase Processing capability through many years of investment across a range of materials and applications (PNNL 2024).

36 MATERIALS SCIENCE↗

DOE OSTI2024

Materials Characterization, Prediction, and Control Project: Summary Report on Material Characterization, Part 3

36 MATERIALS SCIENCE↗

DOE OSTI2024

Materials Characterization, Prediction, and Control Project: Summary Report on Material Characterization, Part 4

36 MATERIALS SCIENCE↗

DOE OSTI2024

Development & Experimental Validation of a Generalized Resistance-Capacitance Model for Numerical Simulation of Phase-Change Material Embedded Heat Exchangers

Latent heat thermal energy storage (LHTES) using phase change material (PCM) has attracted increased attention as a viable solution for overcoming the mismatch between energy supply and demand for renewable energy-based systems. PCM-embedded heat exchangers (PCM-HX) have the potential to significantly improve thermal performance due to high storage capacity and low temperature variation during the phase change process. Most models for simulating LHTES heat transfer use Computational Fluid Dynamics (CFD) simulations, which have high computational costs resulting from considering the complex and time-dependent physics relevant to PCM-HXs. In this paper, a Generalized Resistance Capacitance-based Model (GRCM) was developed to predict the thermal performance of arbitrary PCM-HXs in a computationally efficient manner without compromising modeling accuracy. The GRCM is exercised for three case studies: (i) verification for a single-slabbed finned PCM-HX, (ii) verification and validation for a copper foam/paraffin composite PCM-HX, and (iii) validation for a straight tube annular finned PCM-HX. The copper foam PCM-HX uses an electric heater at the top of HX, while the other two configurations utilize water as heat transfer fluid. For the single-slabbed finned PCM-HX melting case, the mean deviation in average PCM temperature predicted by the GRCM compared to the CFD model was between 0.56 – 0.73 K, with maximum temperature deviation of 2.68 K. For the HTF outlet temperature, the validation results showed that GRCM prediction matches very well with experimental data, with mean temperature deviation of 0.24 K during melting case, while for solidification case was 0.34 K. These results showcase the GRCM’s capability for accurately reproducing the thermal characteristics of PCM-HXs with considerably lower computational effort.

42 ENGINEERING↗

DOE OSTI2021

Shaker-structure interaction modeling and analysis for nonlinear force appropriation testing

Nonlinear force appropriation is an extension of its linear counterpart where sinusoidal excitation is applied to a structure with a modal shaker and phase quadrature is achieved between the excitation and response. While a standard practice in modal testing, modal shaker excitation has the potential to alter the dynamics of the structure under test. Previous studies have been conducted to address several concerns, but this work specifically focuses on a shaker-structure interaction phenomenon which arises during the force appropriation testing of a nonlinear structure. Under pure-tone sinusoidal forcing, a nonlinear structure may respond not only at the fundamental harmonic but also potentially at sub- or superharmonics, or it can even produce aperiodic and chaotic motion in certain cases. Shaker-structure interaction occurs when the response physically pushes back against the shaker attachment, producing non-fundamental harmonic content in the force measured by the load cell, even for pure tone voltage input to the shaker. This work develops a model to replicate these physics and investigates their influence on the response of a nonlinear normal mode of the structure. Experimental evidence is first provided that demonstrates the generation of harmonic content in the measured load cell force during a force appropriation test. This interaction is replicated by developing an electromechanical model of a modal shaker attached to a nonlinear, three-mass dynamical system. Several simulated experiments are conducted both with and without the shaker model in order to identify which effects are specifically due to the presence of the shaker. Finally, the results of these simulations are then compared to the undamped nonlinear normal modes of the structure under test to evaluate the influence of shaker-structure interaction on the identified system’s dynamics.

42 ENGINEERING↗

DOE OSTI2024

Ultrafast jet classification at the HL-LHC

Abstract Three machine learning models are used to perform jet origin classification. These models are optimized for deployment on a field-programmable gate array device. In this context, we demonstrate how latency and resource consumption scale with the input size and choice of algorithm. Moreover, the models proposed here are designed to work on the type of data and under the foreseen conditions at the CERN large hadron collider during its high-luminosity phase. Through quantization-aware training and efficient synthetization for a specific field programmable gate array, we show that O ( 100 ) ns inference of complex architectures such as Deep Sets and Interaction Networks is feasible at a relatively low computational resource cost.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Nitrogen availability and summer drought, but not N:P imbalance, drive carbon use efficiency of a Mediterranean tree-grass ecosystem

All ecosystems contain both sources and sinks for atmospheric carbon (C). A change in their balance of net and gross ecosystem carbon uptake, ecosystem-scale carbon use efficiency (CUE ECO ), is a change in their ability to buffer climate change. However, anthropogenic nitrogen (N) deposition is increasing N availability, potentially shifting terrestrial ecosystem stoichiometry towards phosphorus (P) limitation. Depending on how gross primary production (GPP, plants alone) and ecosystem respiration (R ECO , plants and heterotrophs) are limited by N, P or associated changes in other biogeochemical cycles, CUE ECO may change. Seasonally, CUE ECO also varies as the multiple processes that control GPP and respiration and their limitations shift in time. We worked in a Mediterranean tree-grass ecosystem (locally called ‘dehesa’) characterized by mild, wet winters and summer droughts. We examined CUE ECO from eddy covariance fluxes over 6 years under control, +N and + NP fertilized treatments on three timescales: annual, seasonal (determined by vegetation phenological phases) and 14-day aggregations. Finer aggregation allowed consideration of responses to specific patterns in vegetation activity and meteorological conditions. We predicted that CUE ECO should be increased by wetter conditions, and successively by N and NP fertilization. Milder and wetter years with proportionally longer growing seasons increased CUE ECO , as did N fertilization, regardless of whether P was added. Using a generalized additive model, whole ecosystem phenological status and water deficit indicators, which both varied with treatment, were the main determinants of 14-day differences in CUE ECO . The direction of water effects depended on the timescale considered and occurred alongside treatment-dependent water depletion. Overall, future regional trends of longer dry summers may push these systems towards lower CUE ECO .

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Colloidal Behavior of Plutonium Oxide in Concentrated Electrolyte Solutions

The Hanford Site in Washington State manages legacy high-level radioactive waste streams that display major chemistry and engineering challenges, including the high salt levels and pH values that correspond to conditions under which many classical concepts describing chemical reactivity cannot be applied. One particular challenge that needs to be tackled at Hanford is that Pu concentrations, [Pu], in the soluble phases of the tank wastes are higher than expected based on the solubility of crystalline PuO2, which is widely accepted to be caused by the formation of PuO2 colloid, consisting of nano- to submicron-sized particles (PuO2 NPs). Fundamental research underpinning the behavior of PuO2 NPs under conditions not only relevant to the Hanford tank waste but at high ionic strength in general is needed to reliably predict the chemical reactivity of PuO2 NPs and develop engineering solutions to safely and efficiently process high-level radioactive waste into forms suitable for long-term storage. In this work, we study the behavior of PuO2 NPs (particle size ~100 nm) under high ionic strength conditions by reacting it with highly concentrated (up to 5 M) salt solutions. We explore different electrolyte compositions to elucidate the impact of different anions (NO3-, Cl-, ClO4-, SO42-, C2O42-, CO32-) on the stability of PuO2 NP in the acidic and alkaline pH regime. PuO2 NP aggregation and precipitation as function electrolyte concentration is tracked by a combination of liquid scintillation counting, dynamic light scattering for determination of particle size distributions, and zeta potentials as a proxy for particle charge. At acidic pH, electrolytes containing non-coordinating anions, such as NaNO3, NaCl, and NaClO4 mostly stabilize PuO2 NPs over a large electrolyte concentration range, showing only subtle differences in their reactivity. Other electrolyte anions show a more pronounced effect on the PuO2 NP stability: SO42-, binds directly to the particles’ surface, reverses the particle charge, and precipitates the PuO2 NPs efficiently even at intermediate sulfate concentrations (>0.1 M). In contrast, C2O42- is found to lead to high [Pu] in solution, in the milli-molar range, even at mildly acidic pH (~4). Thermodynamic modeling of the dissolved Pu concentrations using PHREEQC is unable to predict the observed [Pu] in the acidic pH regime, supporting the influence of colloids in maintaining elevated [Pu]. It is noteworthy that the current thermodynamic databases do not include constants for colloidal Pu phases and cannot accurately predict many of the high ionic strength solutions relevant to this work. The mechanisms and models responsible for these observations will need further investigation in the future. At high pH values (~12), PuO2 NPs exhibits classical sol-gel chemistry, meaning that upon destabilization of the colloidal sol, for example by addition of concentrated NaOH, highly porous and viscid PuO2 coagulates are formed that consist of a three-dimensional network likely held together by physical interactions. The PuO2 NP coagulate shows no significant reversibility of the aggregation when contacted with concentrated brines; however, PuO2 NPs can be efficiently resuspended in solution by addition of diluted electrolytes, alkaline solutions containing high amounts of carbonate, or simple addition of water. Especially carbonate is shown to stabilize PuO2 NPs in solution at high pH, characterized by stable colloidal suspensions that are resistant against sedimentation during centrifugation. Thermodynamic modeling of the carbonate system was able to predict an increasing dissolved Pu concentration with increasing carbonate concentration. However, the model was profoundly sensitive to the fixed redox potential and does not include any thermodynamic constants for colloidal Pu species.

Neumann, Julia↗

DOE OSTI2021

Effects of growth substrate on the nucleation of monolayer MoTe 2

The discovery and characterization of two-dimensional (2D) materials beyond graphene has increased dramatically over the past decade with increasingly fine control over the growth dynamics of these materials. MoTe 2 represents a model material for studying phase change properties of 2D materials due to small energy differences between its 2H semiconducting phase and 1T' semimetallic phase. Although some substrates are demonstrated to be better than others for the wafer-scale growth of high quality MoTe 2 films, substrate effects on the nucleation and growth of MoTe 2 are still not well understood. Here, we grow monolayer MoTe 2 by converting MoO x thin films deposited on three different substrates: sapphire Al 2 O 3 (0001), amorphous SiO 2 , and amorphous AlO x , and examine the early stages of the conversion reaction to elucidate the substrate effects on the nucleation of MoTe 2 . We observe that the chemical composition of the substrate is more important than the surface topography and crystallinity of the substrate, with high quality monolayer 2H MoTe 2 formed on both Al 2 O 3 (0001) and AlO x in contrast to mixed phase 2H/1T' MoTe 2 formed on SiO 2 , as determined by Raman spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy.

36 MATERIALS SCIENCE↗

DOE OSTI2025

3D pattern formation of a protein–membrane suspension

Many essential cellular processes, including cell division and the establishment of cell polarity during embryogenesis, are regulated by pattern-forming proteins. These proteins often need to bind to a substrate, such as the cell membrane, onto which they interact and form two-dimensional (2D) patterns. It is unclear how the membrane’s continuity and dimensionality impact pattern formation. Here, we address this gap using the MinDE system, a prototypical example of pattern-forming membrane proteins. We show that when the lipid substrate is fragmented into submicrometer-sized diffusive liposomes, adenosine triphosphate-driven protein–protein interactions generate three-dimensional (3D) spatially extended patterns, despite the complete loss of membrane continuity. Remarkably, these 3D patterns emerge at scales four orders of magnitude larger than the individual liposomes. By systematically varying protein concentration, liposome size, and density, we observed and characterized a variety of 3D dynamical patterns not seen on continuous 2D membranes, including traveling waves, dynamical spirals, and a coexistence phase. Simulations and linear stability analysis of a coarse-grained model revealed that the physical properties of the dispersed membrane effectively rescale both the protein–membrane binding rates and diffusion, two key parameters governing pattern formation and wavelength selection. These findings highlight the robustness of Min’s pattern-forming ability, suggesting that protein–membrane suspensions could serve as an adaptable template for studying out-of-equilibrium self-organization in 3D, beyond in vivo contexts.

36 MATERIALS SCIENCE↗

DOE OSTI2023

SILCC – VII. Gas kinematics and multiphase outflows of the simulated ISM at high gas surface densities

ABSTRACT We present magnetohydrodynamic (MHD) simulations of the star-forming multiphase interstellar medium (ISM) in stratified galactic patches with gas surface densities Σgas = 10, 30, 50, and 100 $\mathrm{M_\odot \, pc^{-2}}$. The silcc project simulation framework accounts for non-equilibrium thermal and chemical processes in the warm and cold ISM. The sink-based star formation and feedback model includes stellar winds, hydrogen-ionizing UV radiation, core-collapse supernovae, and cosmic ray (CR) injection and diffusion. The simulations follow the observed relation between Σgas and the star formation rate surface density ΣSFR. CRs qualitatively change the outflow phase structure. Without CRs, the outflows transition from a two-phase (warm and hot at 1 kpc) to a single-phase (hot at 2 kpc) structure. With CRs, the outflow always has three phases (cold, warm, and hot), dominated in mass by the warm phase. The impact of CRs on mass loading decreases for higher Σgas and the mass loading factors of the CR-supported outflows are of order unity independent of ΣSFR. Similar to observations, vertical velocity dispersions of the warm ionized medium (WIM) and the cold neutral medium (CNM) correlate with the star formation rate as $\sigma _\mathrm{z} \propto \Sigma _\mathrm{SFR}^a$, with a ∼ 0.20. In the absence of stellar feedback, we find no correlation. The velocity dispersion of the WIM is a factor ∼2.2 higher than that of the CNM, in agreement with local observations. For $\Sigma _\mathrm{SFR} \gtrsim 1.5 \times 10^{-2}\, \mathrm{M}_\odot \, \mathrm{yr}^{-1}\, \mathrm{kpc}^{-2}$ the WIM motions become supersonic.

Astronomy & Astrophysics↗

DOE OSTI2020

Confinement Controls the Bend Instability of Three-Dimensional Active Liquid Crystals

Spontaneous growth of long-wavelength deformations is a defining feature of active liquid crystals. We investigate the effect of confinement on the instability of 3D active liquid crystals in the isotropic phase composed of extensile microtubule bundles and kinesin molecular motors. When shear aligned, such fluids exhibit finite-wavelength self-amplifying bend deformations. By systematically changing the channel size we elucidate how the instability wavelength and its growth rate depend on the channel dimensions. Experimental findings are qualitatively consistent with a minimal hydrodynamic model, where the fastest growing deformation is set by a balance of active driving and elastic relaxation. Furthermore, our results demonstrate that confinement determines the structure and dynamics of active fluids on all experimentally accessible length scales.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Assessment of Borehole Gravity (Density) Monitoring for CO 2 Injection into the Dover 33 Reef

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. This report presents the results of BHG surveys conducted in the Lawnichak-Myskier 1-33 well in the Dover 33 reef by Tellus Gravity and Micro-g LaCoste in 2013, 2016, and 2018. A comparison of the data from the three surveys was performed to determine the feasibility of BHG to detect and monitor the location of the injected CO 2 in the reef over time. In addition, modeling was performed to compare the field data with the modeled data. Applying time-lapse BHG monitoring to a carbon sequestration site consists of determining temporal gravity anomalies related to the injection of CO 2 , and exclusively associated to the redistribution of the fluids in the pore space.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2021

Optical follow-up observation for GW event S190510g using Subaru/Hyper Suprime-Cam

Abstract A gravitational wave event, S190510g, which was classified as a binary-neutron-star coalescence at the time of preliminary alert, was detected by LIGO/Virgo collaboration on 2019 May 10. At 1.7 hours after the issue of its preliminary alert, we started a target-of-opportunity imaging observation in the Y band to search for its optical counterpart using the Hyper Suprime-Cam (HSC) on the Subaru Telescope. The observation covers a 118.8 deg2 sky area corresponding to $11.6\%$ confidence in the localization skymap released in the preliminary alert and $1.2\%$ in the updated skymap. We divided the observed area into two fields based on the availability of HSC reference images. For the fields with the HSC reference images, we applied an image subtraction technique; for the fields without the HSC reference images, we sought individual HSC images by matching a catalog of observed objects with the PS1 catalog. The search depth is 22.28 mag in the former method and the limit of search depth is 21.3 mag in the latter method. Subsequently, we performed visual inspection and obtained 83 candidates using the former method and 50 candidates using the latter method. Since we only have the one-day photometric data, we evaluated the probability of candidates being located inside the 3D skymap by estimating their distances with photometry of associated extended objects. We found three candidates are likely located inside the 3D skymap and concluded they could be a counterpart of S190510g, while most of the 133 candidates were likely to be supernovae because the number density of candidates was consistent with the expected number of supernova detections. By comparing our observational depth with a light-curve model of such a kilonova reproducing AT2017gfo, we show that early deep observations with the Subaru/HSC can capture the rising phase of the blue component of a kilonova at the estimated distance of S190510g (∼230 Mpc).

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Noise-Resilient and Reduced Depth Approximate Adders for NISQ Quantum Computing

The "Noisy intermediate-scale quantum" NISQ machine era primarily focuses on mitigating noise, controlling errors, and executing high-fidelity operations, hence requiring shallow circuit depth and noise robustness. Approximate computing is a novel computing paradigm that produces imprecise results by relaxing the need for fully precise output for error-tolerant applications including multimedia, data mining, and image processing. We investigate how approximate computing can improve the noise resilience of quantum adder circuits in NISQ quantum computing. We propose five designs of approximate quantum adders to reduce depth while making them noise-resilient, in which three designs are with carryout, while two are without carryout. We have used novel design approaches that include approximating the Sum only from the inputs (pass-through designs) and having zero depth, as they need no quantum gates. The second design style uses a single CNOT gate to approximate the SUM with a constant depth of O(1). We performed our experimentation on IBM Qiskit on noise models including thermal, depolarizing, amplitude damping, phase damping, and bitflip: (i) Compared to exact quantum ripple carry adder without carryout the proposed approximate adders without carryout have improved fidelity ranging from 8.34% to 219.22%, and (ii) Compared to exact quantum ripple carry adder with carryout the proposed approximate adders with carryout have improved fidelity ranging from 8.23% to 371%. Further, the proposed approximate quantum adders are evaluated in terms of various error metrics.

Gaur, Bhaskar↗