Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

A chemical switch enabled autonomous two-stage crosslinking polymeric binder for high performance silicon anodes

Silicon (Si) is a promising high-capacity anode material for high-energy-density lithium-ion batteries. However, the drastic volumetric changes of Si upon lithiation/delithiation hinder the practical use of Si anodes. Although adhesive polymeric binders, such as poly(acrylic acid) (PAA), mitigate this issue, the cycling performance of the fabricated Si anodes is still far from meeting the criteria of practical applications. In this study, we present a novel polymeric binder system for Si anodes consisting of PAA, a chemical switch (ammonia, NH 3 ), and a crosslinker (branched polyethylenimine, PEI). The crosslinking between PAA and PEI is switched off in the slurry, which can then be turned on during electrode drying. Interestingly, the crosslinking reaction consists of two stages: ionic cross-linking (PAA-PEI-i) and covalent crosslinking (PAA-PEI-c) at a higher temperature (e.g., 130 °C). In half-cells, Si anodes fabricated using the PAA-PEI-c binder show a 67% increase in capacity retention compared to PAA anodes over 150 cycles at C/3 rate. The PAA-PEI-c binder also outperforms PAA in full cells. In addition, the chemical switch controlled crosslinking binder system also facilitates the slurry making process by avoiding early crosslinking. This system requires no additional steps compared to the conventional electrode lamination process, showing enormous potential for direct adoption in large-scale manufacturing.

25 ENERGY STORAGE↗

Revealing the structure and electronic characteristics of Te-rich threshold switching materials for high-density integration

Ovonic threshold switching (OTS) selectors play an important role in the integration of advanced three-dimensional memory. Selectors based on tellurium (Te)-containing materials exhibit significant promise due to their low threshold voltages and superior consistency. Here we have theoretically studied the structure and electronic properties of a typical OTS material, amorphous GeTe 6 , to explore the switching mechanisms using ab initio molecular dynamics simulations. The results indicate that Ge atoms tend to bond with Te atoms, forming stable chemical bonds. The Te-centered clusters are predominantly in the form of distorted octahedrons, while the Ge-centered clusters are in the form of both octahedrons and tetrahedrons. Notably, the proportion of tetrahedrons within the 4-coordinated Ge-centered clusters reaches an impressive 66.9%. These tetrahedrons are randomly dispersed throughout the simulated cell, leading to a stable amorphous configuration. The mid-gap state observed in the mobility bandgap originates from the atomic chain composed of both over-coordinated Ge and Te atoms. It is the inherent stability of the chemical environment within amorphous GeTe 6 that enables it to maintain its amorphous phase under a repeated threshold voltage, a characteristic that distinguishes it from non-OTS materials, such as amorphous tellurium. Furthermore, our findings provide an in-depth understanding of the structure and electronic characteristics of amorphous GeTe 6 , which can promote the design and application of the Te-rich threshold switching materials.

36 MATERIALS SCIENCE↗

In Vitro Validation of a Sector-Switching HIFU Device for Accelerated Treatment

A sector-switching method that increases the HIFU sequence duty-cycle and reduces the equivalent treatment time was tested in vitro. The MR-compatible HIFU device used consisted of 2 symmetric sectors arranged on a truncated spherical cap (focus = 45 mm, long diameter = 57.5 mm, short diameter = 35 mm). A MR-compatible, 2D positioning system provided 0.5 mm accuracy. Two sonication sequences were considered, each with the same pattern for the focal point trajectory and with identical on-state power. First, both sectors radiated simultaneously, with a power duty cycle of 60%. Second, the sectors radiated separately with balanced temporally-interleaved sonication and a power duty cycle of 87.5%. Numerical simulations were performed to predict the shape of the lesion for a given set of sequence parameters, according to a theoretical model. Fast MR thermometry (voxel size: 0.85x0.85x4.25 mm3; temporal resolution: 2 sec) was performed in two orthogonal planes (sagittal and transverse) while the 2D sonication pattern was contained in the coronal plane. Fresh samples of degassed porcine liver were used, and the macroscopic lesions were measured after HIFU. The 14400 s equivalent thermal dose isolevel was compared respectively for the two sonication sequences, both with numerical simulations and experimental MR data. No susceptibility or RF artifacts could be detected on MR data. The lesion's size ratio between reference versus the sector-switched sequence was 1.12 from simulations and 1.25 ({+-}3.2%) from MRI derived TD. Switching the device sectors reduced the treatment time by 20% while the shape and size of the lesions were maintained. In vivo studies are required for pre-clinical validation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Bipolar resistive switching performance of the nonvolatile memory cells based on (AgI){sub 0.2}(Ag{sub 2}MoO{sub 4}){sub 0.8} solid electrolyte films

Resistive switching memory cells with polycrystalline (AgI){sub 0.2}(Ag{sub 2}MoO{sub 4}){sub 0.8} (AIMO) solid electrolyte films as storage medium were fabricated on SiO{sub 2}/Pt/Ti/Si substrates by using pulse laser deposition technique and focused ion beam lithography. X-ray diffraction, scanning electron microscopy, and energy dispersive x-ray analysis have been employed to investigate the structure, the surface morphology, and the composition of AIMO thin films. The Ag/AIMO/Pt memory cells with sandwich structure exhibit stable, reproducible, and reliable resistive switching characteristics. The ratio of resistance between high resistance states and low resistance states can reach approx10{sup 5}. Moreover, the low resistance is approx500 OMEGA at a compliance current of 0.5 mA, which is favorable to reduce the power dissipation of the entire circuit. The switching-on mechanism has been discussed and the metallic conduction characteristic has also been verified. The fast response speed and the good retention properties further indicate that polycrystalline AIMO thin film is a potential candidate for the next generation nonvolatile memory.

36 MATERIALS SCIENCE↗

Resistive switching characteristics of ZnO thin film grown on stainless steel for flexible nonvolatile memory devices

This paper reports a resistive switching device of Au/ZnO/stainless steel (SS) and its applicability as a flexible resistive random access memory (ReRAM). The Au/ZnO/SS structure was fabricated by radio frequency sputtering deposition of a ZnO thin film on the SS substrate. The fabricated device showed stable unipolar and bipolar resistive switching behaviors with reliable switching responses over 100 cycles. The device performance was not degraded upon bending, which indicates high potential for flexible ReRAM applications.

36 MATERIALS SCIENCE↗

Switching surface polarization of atomic force microscopy probe utilizing photoisomerization of photochromic molecules

An attempt to develop an atomic force microscopy (AFM) probe with optically switchable polarization is described. Modification with a single molecular layer of photochromic molecules was attempted onto a Si substrate that is a prototype for a probe surface. Polarization switching caused by alternate irradiation of UV and visible lights were detected using the electrostatic force?>spectroscopy (EFS) technique. Si substrates modified with spiropyran and azobenzene exhibited reversible polarization switching that caused changes in CPD of about 100 and 50 mV, respectively. Modification with spiropyran was also attempted onto a Si probe and resulted in a CPD change of about 100 mV. It was confirmed that modification of an AFM probe or substrate with a single molecular layer of photochromic molecules can generate surface polarization switching of a mechanically detectable level.

74 ATOMIC AND MOLECULAR PHYSICS↗

Switching field distribution of planar-patterned CrPt{sub 3} nanodots fabricated by ion irradiation

Planar-patterned CrPt{sub 3} ordered L1{sub 2} nanodots with various bit sizes (D) from 220 to 55 nm were fabricated by the local irradiation of 30 keV of Kr{sup +} ions not by conventional physical etching. Patterned nanodots with bit size {<=} 65 nm show either dark or bright contrast, suggesting that they have single domain structure. Switching field distribution of nanodots was studied by taking magnetic force microcopy images, in the progress of the magnetization reversal. As-prepared CrPt{sub 3} film exhibited perpendicular hysteresis loop with the coercivity of 5.5 kOe. Compared with the as-prepared film, the average switching field (H{sub sf}) of the CrPt{sub 3} nanodots increased as 6.5, 8.5, and 9.2 kOe while the switching field distribution ({Delta}H{sub sf}) decreased as 6.8, 3.6, and 2.8 kOe, for the patterned nanodots with bit sizes of 220, 150, 65 nm, respectively. We found that the small {Delta}H{sub sf}/H{sub sf} is possible in the high density planar bit patterned media fabricated by ion irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nonlinear current-voltage behavior of the isolated resistive switching filamentary channels in CuC nanolayer

Copper-doped amorphous carbon film was prepared by radio frequency reactive magnetron sputtering and their resistive switching behaviors were studied under a conductive atomic force microscope (cAFM). The repetitive scanning over the same area using cAFM with various bias voltages revealed that most of the isolated conductive paths were involved in resistive switching with asymmetric nonlinear I-V characteristics. The observed I-V behavior of nanoscale filamentary channels indicates that electron transfer mechanism of resistive switching filamentary channel in Pt/CuC/Pt is a tunneling between Cu filamentary channel and electrode through the solid electrolyte rather than conduction through fully connected Cu filamentary channel.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Micromagnetic simulation of spin-transfer switching in a full-Heusler Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} alloy spin-valve nanopillar

We investigated the spin-transfer switching in a full-Heusler Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} alloy spin-valve nanopillar through micromagnetic simulation. A two-step switching hysteresis loop due to the fourfold in-plane magnetocrystalline anisotropy of Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} layers was obtained. The simulation explains the experimental result of the resistance versus current hysteresis loop and yields good agreement with the measured critical current. Furthermore, the magnetization trajectory and magnetization distribution were shown and analyzed to elucidate the different characters of two-step switching.

36 MATERIALS SCIENCE↗

Control of normal and abnormal bipolar resistive switching by interface junction on In/Nb:SrTiO{sub 3} interface

The resistive switching behaviors of indium (In)/Nb:SrTiO{sub 3} (NSTO) with different metal/semiconductor contacts are investigated. The In electrodes with the Schottky contacts are fabricated on NSTO surface using direct current reactive magnetron sputtering, and the fresh In is directly pressed to form the Ohmic contact. The device with one Schottky barrier displays a normal bipolar resistive switching (BRS) behavior, while the device with two Schottky barriers shows an abnormal BRS behavior. The results demonstrate that the injection and trapping or detrapping of carriers near the interface between the metal electrode and semiconductor are closely related to the resistive switching performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A reactive magnetron sputtering route for attaining a controlled core-rim phase partitioning in Cu{sub 2}O/CuO thin films with resistive switching potential

The achievement of a reproducible and controlled deposition of partitioned Cu{sub 2}O/CuO thin films by techniques compatible with ULSI processing like reactive magnetron sputtering has been reported as an outstanding challenge in the literature. This phase partitioning underlies their performance as reversible resistive memory switching devices in advanced microelectronic applications of the future. They are currently fabricated by thermal oxidation and chemical methods. We have used a combination of an understanding from plasma chemistry, thermo-kinetics of ions, and rf power variation during deposition to successfully identify a processing window for preparing partitioned Cu{sub 2}O/CuO films. The production of a core rich Cu{sub 2}O and surface rich Cu{sub 2}O/CuO mixture necessary for oxygen migration during resistive switching is confirmed by XRD peaks, Fourier transform infra red Cu (I)-O vibrational modes, XPS Cu 2P{sub 3/2} and O 1S peak fitting, and a comparison of satellite peak ratio's in Cu 2P{sub 3/2} fitted peaks. We are proposing based on the findings reported in this paper that an XPS satellite peak intensity(I{sub s}) to main peak intensity ratio (I{sub m}) {<=} 0.45 as an indicator of a core rich Cu{sub 2}O and surface rich Cu{sub 2}O/CuO formation in our prepared films. CuO is solely responsible for the satellite peaks. This is explained on the basis that plasma dissociation of oxygen will be limited to the predominant formation of Cu{sub 2}O under certain plasma deposition conditions we have identified in this paper, which also results in a core-rim phase partitioning. The deposited films also followed a Volmer-Weber columnar growth mode, which could facilitate oxygen vacancy migration and conductive filaments at the columnar interfaces. This is further confirmed by optical transmittance and band-gap measurements using spectrophotometry. This development is expected to impact on the early adoption of copper oxide based resistive memory electronic switching devices in advanced electronic devices of the future. The relative abundance of copper is another major complementary driver for the interest in copper oxide films.

36 MATERIALS SCIENCE↗

Fast high-temperature superconductor switch for high current applications

Reversible operation of a high current superconductor switch based on the quench of high-resistance second generation high temperature superconducting wire is demonstrated. The quench is induced by a burst of an ac field generated by an inductively coupled radio-frequency coil. The switch makes a superconducting-to-normal transition within 5 ms and also has a rapid recovery to the superconducting state. The device has potential applications as an active current limiter or as a storage switch for superconducting magnetic energy storage systems. Operation in a full flux penetration/flow regime can effectively minimize the detrimental effects of the intrinsic conductor non-uniformity. (C) 2013 AIP Publishing LLC.

Solovyov, VF↗

Multi-jump magnetic switching in ion-beam sputtered amorphous Co{sub 20}Fe{sub 60}B{sub 20} thin films

Unconventional multi-jump magnetization reversal and significant in-plane uniaxial magnetic anisotropy (UMA) in the ion-beam sputtered amorphous Co{sub 20}Fe{sub 60}B{sub 20}(5–75 nm) thin films grown on Si/amorphous SiO{sub 2} are reported. While such multi-jump behavior is observed in CoFeB(10 nm) film when the magnetic field is applied at 10°–20° away from the easy-axis, the same is observed in CoFeB(12.5 nm) film when the magnetic field is 45°–55° away from easy-axis. Unlike the previous reports of multi-jump switching in epitaxial films, their observance in the present case of amorphous CoFeB is remarkable. This multi-jump switching is found to disappear when the films are crystallized by annealing at 420 °C. The deposition geometry and the energy of the sputtered species appear to intrinsically induce a kind of bond orientation anisotropy in the films, which leads to the UMA in the as-grown amorphous CoFeB films. Exploitation of such multi-jump switching in amorphous CoFeB thin films could be of technological significance because of their applications in spintronic devices.

36 MATERIALS SCIENCE↗

Observation of rebirth of metallic paths during resistance switching of metal nanowire

To clarify the mechanism of resistance-switching phenomena, we have investigated the change in the electronic structure of a Ni nanowire device during resistance-switching operations using scanning photoelectron microscopy techniques. We directly observed the disappearance of density of state (DOS) at the Fermi level (E{sub F}) in a high-resistance state and recovery of a finite DOS at E{sub F} in a low-resistance state. These results are direct evidence that the Ni nanowire is fully oxidized after switching to the high-resistance state and that Ni-metal conductive paths in the oxidized nanowire are recovered in the low-resistance state.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multilevel and long retentive resistive switching in low temperature nanostructured Cu/SiO{sub x}-W-SiO{sub x}/Pt

Amorphous SiO{sub x}-based memory films are fabricated at room temperature, and study on their resistive switching characteristics and improvement approaches is performed. Multilevel resistive states with large ratio 1: ∼10{sup 2}: 3 × 10{sup 5} and long retention exceeding 2 × 10{sup 6} s at ambient temperature and humidity are observed in Cu/SiO{sub x} (9 nm)-W (∼2 nm)-SiO{sub x} (9 nm)/Pt ultrathin stack. Nonvolatile switching is consistently realized in microscopy. Based on investigations of microscopic conduction and microstructure, tungsten incorporation with copper as relay bridges for conducting filaments is proposed to attribute to the performance improvement and the multilevel switching mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Switching of localized surface plasmon resonance of gold nanoparticles on a GeSbTe film mediated by nanoscale phase change and modification of surface morphology

As a platform for active nanophotonics, localized surface plasmon resonance (LSPR) switching via interaction with a chalcogenide phase change material (GeSbTe) was investigated. We performed single-particle spectroscopy of gold nanoparticles placed on a GeSbTe thin film. By irradiation with a femtosecond pulsed laser for amorphization and a continuous wave laser for crystallization, significant switching behavior of the LSPR band due to the interaction of GeSbTe was observed. The switching mechanism was explained in terms of both a change in the refractive index and a modification of surface morphology accompanying volume expansion and reduction of GeSbTe.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Bimodal switching field distributions in all-perpendicular spin-valve nanopillars

Switching field measurements of the free layer element of 75 nm diameter spin-valve nanopillars reveal a bimodal distribution of switching fields at low temperatures (below 100 K). This result is inconsistent with a model of thermal activation over a single perpendicular anisotropy barrier. The correlation between antiparallel to parallel and parallel to antiparallel switching fields increases to nearly 50% at low temperatures. This reflects random fluctuation of the shift of the free layer hysteresis loop between two different magnitudes, which may originate from changes in the dipole field from the polarizing layer. The magnitude of the loop shift changes by 25% and is correlated to transitions of the spin-valve into an antiparallel configuration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Critical analysis and remedy of switching failures in straintronic logic using Bennett clocking in the presence of thermal fluctuations

Straintronic logic is a promising platform for beyond Moore's law computing. Using Bennett clocking mechanism, information can propagate through an array of strain-mediated multiferroic nanomagnets, exploiting the dipolar coupling between the magnets without having to physically interconnect them. Here, we perform a critical analysis of switching failures, i.e., error in information propagation due to thermal fluctuations through a chain of such straintronic devices. We solved stochastic Landau-Lifshitz-Gilbert equation considering room-temperature thermal perturbations and show that magnetization switching may fail due to inherent magnetization dynamics accompanied by thermally broadened switching delay distribution. Avenues available to circumvent such issue are proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗