Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Solving complex nanostructures with ptychographic atomic electron tomography

Abstract Transmission electron microscopy (TEM) is essential for determining atomic scale structures in structural biology and materials science. In structural biology, three-dimensional structures of proteins are routinely determined from thousands of identical particles using phase-contrast TEM. In materials science, three-dimensional atomic structures of complex nanomaterials have been determined using atomic electron tomography (AET). However, neither of these methods can determine the three-dimensional atomic structure of heterogeneous nanomaterials containing light elements. Here, we perform ptychographic electron tomography from 34.5 million diffraction patterns to reconstruct an atomic resolution tilt series of a double wall-carbon nanotube (DW-CNT) encapsulating a complex ZrTe sandwich structure. Class averaging the resulting tilt series images and subpixel localization of the atomic peaks reveals a Zr 11 Te 50 structure containing a previously unobserved ZrTe 2 phase in the core. The experimental realization of atomic resolution ptychographic electron tomography will allow for the structural determination of a wide range of beam-sensitive nanomaterials containing light elements.

36 MATERIALS SCIENCE↗
DOE OSTI2026

New developments in structure-property and amorphous materials research at the upgraded 16-BM-B Paris-Edinburgh press station at HPCAT

Beamline 16-BM-B of the High-Pressure Collaborative Access Team (HPCAT) at the Advanced Photon Source (APS) provides a Paris-Edinburgh press program to probe the structure and properties of crystalline and amorphous materials up to 12 GPa at room temperature or 7 GPa at 2000°C. During the recent APS upgrade, 16-BM-B undertook major improvements to its instrumentation and measurement techniques. The upgrade includes the addition of a 1.2 m horizontal “condenser” mirror and a new variable-sized collimation system, the combination of which decreases the acquisition time for energy dispersive X-ray diffraction measurements by a factor of 10 when compared to pre-upgrade measurements. The addition of a new Ge energy-sensitive detector and DANTE (XGLab) digital pulse processor allows for processing the increased diffraction counts with minimal deadtime. In addition to upgraded beamline components, new techniques are being developed for eventual release to the user community, including electrical resistivity and tomography measurements.

APS upgrade↗
DOE OSTI2026

Gaunt and Breit two-electron contributions to mean-field transformations and fine structure splitting

Materials utilized by novel energy systems are often studied using weakly correlated mean-field theories. However, if these systems incorporate heavy elements, relativistic effects must be included. Therefore, a Kramers unrestricted coupled cluster with singles and doubles excitation formalism within a molecular mean-field exact two-component framework (X2C mmf ) using a four-component Dirac–Hartree–Fock (DHF) reference state is presented. The exact X2C mmf transformed normal-order Hamiltonian incorporates all one-electron and two-electron (2e) contributions from the Coulomb, Gaunt, and Breit operators and is used with the equation of motion method to calculate the excitation energies of the alkali group of elements. Using this framework, the effects of 2e Gaunt and Breit integrals are studied. Results demonstrate growing contributions from these integrals to the generated X2C mmf mean-fields and electronic fine structure calculations with increasing atomic number. Overall, this paper outlines the method, its effect within the X2C mmf approach, and lays the foundation for future theoretical development of relativistic calculations within this framework.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Computed Tomography (CT) Analysis of 3D Printed Lattice Structures

LATTICE structures are increasingly used in product design across different industries, including the Department of Energy (DOE), due to their high strength and lightweight properties. These structures possess qualities such as high stiffness, energy absorption, large surface area, and structural support. To ensure lattice structures' quality and symmetry, it is crucial to have defect-free structures. However, in some cases, traditional non-destructive evaluation methods may not be practical due to encasing lattice structures in material. To analyze the lattice structures' quality, this project will employ CT imaging to gain access to the encased structures and perform a detailed analysis of each section. Three 3D printed complex lattice cubes were created, with two exposed and one encased in material, for this project. The CT X-ray cabinet will be used to scan all three cubes, and the data collected will be reconstructed and evaluated using complex interpretation software. This analysis will allow for a detailed examination of the structure's porosity, inclusions, cracks, wall thickness, and symmetry in each section.

36 MATERIALS SCIENCE↗
DOE OSTI2022

An IIPG-based finite element framework in MOOSE for modeling fiber reinforced composite failure governed by extrinsic cohesive laws

Fiber reinforced composites (FRC) are widely applied to many important engineering structures such as silicon carbide ceramic matrix composite (SiC CMC) of nuclear fuel claddings. Many material and structure failures are initiated at the interface between two distinctive materials, such as the debonding of interfaces of matrix/fiber of composites or bulk matrix/inclusion in metals at micro-scales. Accurate and robust modeling of these interface failures is critical to the development of novel material and structure with improved functionality. This paper presents a discontinuous Galerkin (DG) finite element method based on the Incomplete Interior Penalty scheme and its implementation in MOOSE for modeling material interface behaviors. The proposed method naturally accommodates important extrinsic cohesive zone material models and is capable of modeling the failures of material interfaces across which material properties are highly distinctive. We demonstrate a good performance of the proposed method using single fiber and multiple fiber debonding problems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Laser-based ultrasound interrogation of surface and sub-surface features in advanced manufacturing materials

Abstract Structures formed by advanced manufacturing methods increasingly require nondestructive characterization to enable efficient fabrication and to ensure performance targets are met. This is especially important for aerospace, military, and high precision applications. Surface acoustic waves (SAW) generated by laser-based ultrasound can detect surface and sub-surface defects relevant for a broad range of advanced manufacturing processes, including laser powder bed fusion (LPBF). In particular, an all-optical SAW generation and detection configuration can effectively interrogate laser melt lines. Here we report on scattered acoustic energy from melt lines, voids, and surface features. Sub-surface voids are also characterized using X-ray Computed Tomography (CT). High resolution CT results are presented and compared with SAW measurements. Finite difference simulations inform experimental measurements and analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Local structure study on magnetostrictive material Tb 1–x Dy x Fe 2

Tb 1–x Dy x Fe 2 system has attracted more research interest due to the large magnetostrictive effect. The crystal structures and physical properties have been well studied, but research studies on their local structures are still rare. As such, in this work, the local structure of Tb 1–x Dy x Fe 2 samples was studied using the pair distribution function and x-ray absorption spectroscopy techniques. The results demonstrate that the system owns the same local crystal symmetry with its average structure in the ferromagnetic phase, and the crystal lattice of the system is more ordered with increasing Dy content, indicating that the Dy-rich tetragonal phase is more stable than the Tb-rich rhombohedral phase. The different roles of metallic bonds in affecting the crystal lattice are presented. The weak Fe 1 –Fe 2 bonds influenced by the local environment such as local stress from randomly distributed nanodomains could originate the anomalies in the lattice, resulting in the more ordered and stable Dy-rich phase than the Tb-rich phase.

36 MATERIALS SCIENCE↗
DOE OSTI2022

MENUS—Materials engineering by neutron scattering

Materials engineering by neutron scattering (MENUS) at the second target station will be a transformational high-flux, versatile, multiscale materials engineering diffraction beamline with unprecedented new capabilities for the study of complex materials and structures. It will support both fundamental and applied materials research in a broad range of fields. MENUS will combine unprecedented long-wavelength neutron flux and unique detector coverage to enable real-time studies of complex structural and functional materials under external stimuli. The incorporated small angle neutron scattering and transmission/imaging capabilities will extend its sensitivity to larger length scales and higher spatial resolution. Multimodal MENUS will provide crystallographic and microstructure data to the materials science and engineering community to understand lattice strain/phase transition/microstructure/texture evolution in three orthogonal directions in complex material systems under combined extreme applied conditions. Finally, the capabilities of MENUS will open new scientific opportunities and meet the research needs for science challenges to enable studies of a range of phenomena and answer the key questions in material design/exploration, advanced material processing, transformative manufacturing, and material operations of national impacts in our daily life.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Design of functional composite and all-inorganic nanostructured materials via infiltration of polymer templates with inorganic precursors

Robust and efficient approaches for the synthesis of materials with structure, porosity, and composition controlled at the nanoscale are highly important for a wide range of applications. Polymer templates are promising platforms to achieve such control. The self-assembly process of polymers provides access to diverse structures that can serve as templates for the deposition of inorganic materials. By infiltrating metal precursors from gas or liquid phases, using sequential infiltration synthesis (SIS) or swelling-based infiltration (SBI), respectively, into the polymer templates, one can create finely-tuned texturing of the surface films and bulk materials. In this review, we outline the specifics and dynamics of the polymer infiltration process and characterize the structure and properties of the synthesized materials. Finally, we highlight recent progress in implementing polymer infiltration-based nanoporous ceramics for many applications, including sensors, antireflective coatings, oil-absorbing foams, nanolithographic patterns, and catalytic materials.

Berman, Diana↗
DOE OSTI2023

Thermodynamic controls on the synthesis, structure and reactivity of materials for energy (Final Report)

The major objectives have been: a) to advance and use unique calorimetric capabilities to determine the energetics of oxide and other materials having possible energy applications, with an emphasis on new materials for batteries, fuel cells and solar energy conversion, b) to understand, in terms of both macroscopic energetics and microscopic structure and bonding, the interplay of defect chemistry, oxidation-reduction, and size effects at the bulk and nanoscale in determining materials properties. This project emphasizes mixed ionic-electronic conduction materials containing transition metals of variable valence, especially perovskites and lithium containing phases, with M = Mn, Fe, Co, Ni. The thermochemistry of new families of complex halide, chalcogenide, nitride and hybrid (organic-inorganic) perovskite materials were explored. The major and unique technique employed is high temperature oxide melt solution calorimetry, with careful attention given to materials synthesis and characterization. The thermochemical studies will be coupled with structural studies, especially to characterize order-disorder phenomena by in situ high temperature diffraction techniques.

14 SOLAR ENERGY↗
DOE OSTI2021

The status of the Japanese material properties handbook and the challenge to facilitate structural design criteria for DEMO in-vessel components

This work summarizes the current status of the material properties handbook for a structural design using Japanese reduced-activation ferritic/martensitic steel F82H. Specifically, the key structural parameters, e.g. time-independent/dependent design stresses and fatigue design curves, were determined by following the French structural design code RCC-MRx. Moreover, under the Japan–U.S. collaboration, tensile data were newly added to the benchmark heavy irradiation data up to 80 dpa, as critical input information in the intermediate check and review in Japan. Furthermore, the status of structural material data and the near-term and long-term issues were clarified by the evaluation using the attribute guides. In parallel, the structural design approaches, which were newly introduced and extended to cope with the structural design issues under the complex environmental conditions peculiar to the DEMO reactor, were noted with the initial R&D results. Of the many design issues, the multi-axial loading conditions due to the complexity of the DEMO reactor as well as the coolant compatibility and the irradiation effect are mentioned. For example, in the paper, multi-axial fatigue–creep testing and evaluation using the modified universal slope method and brittle/ductile fracture testing and evaluation using the local approach are explained toward DEMO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Characterizing material transitions in large-scale Additive Manufacturing

Integrating Multiple Materials (MM) into large-scale Additive Manufacturing (AM) is a key for various industrial applications wishing to incorporate site-specific properties into geometrically complex designs that are difficult to manufacture with traditional techniques. Printing with multiple materials is typically accomplished by using layers as natural material boundaries, but having the capability to switch between materials within a single layer without pausing would further expand MM possibilities. This study used Cincinnati Incorporated’s Big Area Additive Manufacturing (BAAM) system to explore material transitions with a novel dual-hopper that enables in-situ material blending of a pelletized feedstock. Constructing MM and functionally graded material (FGM) structures requires depositing a specific material composition at a specific geometric location to achieve a desired performance. Furthermore, accurately implementing this with the BAAM’s blended extrusion system requires a thorough understanding of the transition between distinct material compositions. This study characterizes a step-change transition between neat acrylonitrile butadiene styrene (ABS) and carbon fiber-reinforced ABS. Three distinct techniques were compared for analyzing the fiber content, and the transition zone between materials was characterized as a function of transition direction. The transition process was consistent to within 0.7 wt% carbon fiber variation between different layers and prints. The transition between materials was found to be directionally dependent, with ABS to CF/ABS having a transition length of 3.5 m compared to 3.2 m for CF/ABS to ABS. Furthermore, the transition from Material A to Material B was found to be repeatable with a possible variance in transition length of 0.3 m.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Artifact identification in X-ray diffraction data using machine learning methods

In situ synchrotron high-energy X-ray powder diffraction (XRD) is highly utilized by researchers to analyze the crystallographic structures of materials in functional devices ( e.g. battery materials) or in complex sample environments ( e.g. diamond anvil cells or syntheses reactors). An atomic structure of a material can be identified by its diffraction pattern along with a detailed analysis of the Rietveld refinement which yields rich information on the structure and the material, such as crystallite size, microstrain and defects. For in situ experiments, a series of XRD images is usually collected on the same sample under different conditions ( e.g. adiabatic conditions) yielding different states of matter, or is simply collected continuously as a function of time to track the change of a sample during a chemical or physical process. In situ experiments are usually performed with area detectors and collect images composed of diffraction patterns. For an ideal powder, the diffraction pattern should be a series of concentric Debye–Scherrer rings with evenly distributed intensities in each ring. For a realistic sample, one may observe different characteristics other than the typical ring pattern, such as textures or preferred orientations and single-crystal diffraction spots. Textures or preferred orientations usually have several parts of a ring that are more intense than the rest, whereas single-crystal diffraction spots are localized intense spots owing to diffraction of large crystals, typically >10 µm. In this work, an investigation of machine learning methods is presented for fast and reliable identification and separation of the single-crystal diffraction spots in XRD images. The exclusion of artifacts during an XRD image integration process allows a precise analysis of the powder diffraction rings of interest. When it is trained with small subsets of highly diverse datasets, the gradient boosting method can consistently produce high-accuracy results. The method dramatically decreases the amount of time spent identifying and separating single-crystal diffraction spots in comparison with the conventional method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Geometry-aware framework for deep energy method: An application to structural mechanics with hyperelastic materials

Here, in this work, we introduce a novel physics-informed framework named the Geometry-Aware Deep Energy Method (GADEM) for solving structural mechanics problems on different geometries. As the weak form of the physical system equation (or the energy-based approach) has demonstrated clear advantages compared to the strong form for solving solid mechanics problems, GADEM employs the weak form and aims to infer the solution on multiple shapes of geometries. Integrating a geometry-aware framework into an energy-based method results in an effective physics-informed deep learning model in terms of accuracy and computational cost. Different ways to represent the geometric information and to encode the geometric latent vectors are investigated in this work. We introduce a loss function of GADEM which is minimized based on the potential energy of all considered geometries. An adaptive learning method is also employed for the sampling of collocation points to enhance the performance of GADEM. We present some applications of GADEM to solve solid mechanics problems, including a loading simulation of a toy tire involving contact mechanics and large deformation hyperelasticity. The numerical results of this work demonstrate the remarkable capability of GADEM to infer the solution on various and new shapes of geometries using only one trained model.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Carbon doping in GeTe drives differences in local structure and properties

Advances in low-power, energy-efficient information storage and computing require understanding and controlling the atomic and nanoscale structures of functional materials, such as phase-change materials. Phase-change memory technology enables nonvolatile, low-power memory in devices by storing information through reversible changes in a phase-change material's atomic structure (i.e., transformations between amorphous and crystalline phases) that have corresponding changes in properties, including electronic resistivity and optical reflectivity. Here, we apply complementary X-ray absorption spectroscopy and X-ray pair distribution function analyses to experimentally identify the local- and medium-range atomic structure differences of GeTe and C-doped GeTe thin films. Upon controlled heating, composition- and temperature-dependent atomic structure evolution in GeTe and C-doped GeTe films shows differences in bonding behavior and local structure that directly influence crystallization onset temperature. We find that the introduction of C interrupts Ge–Ge bonds in amorphous GeTe, altering the as-deposited structure to be more similar to the distorted rocksalt structure of crystalline α–GeTe. The change alters the response of the amorphous atomic structure to heating and also lowers the crystallization onset temperature, from 230 °C in GeTe to 220 °C in the C-doped film. The combined insights from both X-ray techniques provide understanding of structural transformations that enables the development and optimization of next-generation memory and computing materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Materials and methods used in the ice making process

A detailed survey of ice mold and evaporator metal surfaces, physical structures, operational conditions, materials of construction, design of different equipment was reviewed and analyzed. The key objective was to identify different ice related processes’ materials, structures, and operating conditions for designing, optimizing, and applying advance materials to lower ice adhesion strength.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Crystalline materials for quantum computing: Semiconductor heterostructures and topological insulators exemplars

Abstract High-purity crystalline solid-state materials play an essential role in various technologies for quantum information processing, from qubits based on spins to topological states. New and improved crystalline materials emerge each year and continue to drive new results in experimental quantum science. This article summarizes the opportunities for a selected class of crystalline materials for qubit technologies based on spins and topological states and the challenges associated with their fabrication. We start by describing semiconductor heterostructures for spin qubits in gate-defined quantum dots and benchmark GaAs, Si, and Ge, the three platforms that demonstrated two-qubit logic. We then examine novel topologically nontrivial materials and structures that might be incorporated into superconducting devices to create topological qubits. We review topological insulator thin films and move onto topological crystalline materials, such as PbSnTe, and its integration with Josephson junctions. We discuss advances in novel and specialized fabrication and characterization techniques to enable these. We conclude by identifying the most promising directions where advances in these material systems will enable progress in qubit technology.

Scappucci, G. (ORCID:0000000325120079)↗
DOE OSTI2021

Dynamic structural views in solar energy materials by femtosecond electron diffraction

Solar materials convert light into other forms of energy through excited state processes occurring on ultrafast time and atomic length scales. Understanding and controlling such nonequilibrium processes is essential for applications ranging from photovoltaics to photocatalysis. These processes are commonly studied by transient optical techniques, which resolve charge carrier dynamics. However, optical spectroscopy does not directly probe the atomic-scale motions that play a central role in the ultimate functionality of these materials. Filling this missing gap, ultrafast electron and x-ray scattering techniques enable monitoring of structural dynamics in materials with femtosecond time resolution. In this work, we focus on the use of ultrafast electron diffraction (UED) techniques to probe photoinduced energy conversion dynamics in solar energy materials. First, we discuss the use of UED as an ultrafast lattice thermometer allowing a direct probe of nonradiative relaxations such as hot carrier cooling and Auger recombination. Second, we present a time-resolved atomic pair distribution function analysis enabled by UED, which uncovers lattice deformations arising from excitation localization in materials. Finally, we provide an outlook looking toward new approaches for resolving in situ energy conversion dynamics and uncovering structure–property relationships in solar energy materials.

36 MATERIALS SCIENCE↗