Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Global heliospheric termination shock strength in the solar–interstellar interaction

A heliospheric termination shock (HTS) surrounds our Solar System at approximately 100 astronomical units from the Sun, where the expanding solar wind (SW) is compressed and heated before encountering the interstellar medium. HTS-accelerated particles govern the pressure balance with the interstellar medium, but little is known about the global properties of the HTS beyond in situ measurements from Voyager in only two directions of the sky. Here we fill this gap by extracting the HTS strength using particle-in-cell, test particle and magnetohydrodynamic simulations, constrained by Interstellar Boundary Explorer observations of energetic neutral atoms produced from HTS-accelerated particles. Our results reveal there is a higher compression near the poles during solar minimum compared with solar maximum due to the higher Mach number flow. North–south asymmetries arise from the disparate evolution of the polar coronal holes, while minimum compression near the flanks is probably due to SW slowing from mass loading over a greater distance to the HTS. The results imply a strong connection between the HTS strength and the SW and interstellar medium dynamics.

Astrophysical plasmas↗
DOE OSTI2024

Twisted-layer boron nitride ceramic with high deformability and strength

Moiré superlattices formed by twisted stacking in van der Waals materials have emerged as a new platform for exploring the physics of strongly correlated materials and other emergent phenomena. However, there remains a lack of research on the mechanical properties of twisted-layer van der Waals materials, owing to a lack of suitable strategies for making three-dimensional bulk materials. Here we report the successful synthesis of a polycrystalline boron nitride bulk ceramic with high room-temperature deformability and strength. This ceramic, synthesized from an onion-like boron nitride nanoprecursor with conventional spark plasma sintering and hot-pressing sintering, consists of interlocked laminated nanoplates in which parallel laminae are stacked with varying twist angles. The compressive strain of this bulk ceramic can reach 14% before fracture, about one order of magnitude higher compared with traditional ceramics (less than 1% in general), whereas the compressive strength is about six times that of ordinary hexagonal boron nitride layered ceramics. The exceptional mechanical properties are due to a combination of the elevated intrinsic deformability of the twisted layering in the nanoplates and the three-dimensional interlocked architecture that restricts deformation from propagating across individual nanoplates. The advent of this twisted-layer boron nitride bulk ceramic opens a gate to the fabrication of highly deformable bulk ceramics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Investigation of interfacial strength in nacre-mimicking tungsten heavy alloys for nuclear fusion applications

Abstract Tungsten heavy alloys have been proposed as plasma facing material components in nuclear fusion reactors and require experimental investigation in their confirmation. For this purpose, a 90W–7Ni–3Fe alloy has been selected and microstructurally manipulated to present a multiphase brick-and-mortar structure of W-phase ‘bricks’ surrounded by a ductile ‘mortar’. This work draws inspiration from nature to artificially imitate the extraordinary combination of strength and stiffness exhibited by mollusks and produce a nacre-mimicking metal matrix composite capable of withstanding the extremely hostile environment of the reactor interior and maintaining structural integrity. The underlying mechanisms behind this integrity have been probed through high-resolution structural and chemical characterization techniques and have revealed chemically diffuse phase boundaries exhibiting unexpected lattice coherency. These features have been attributed to an increase in the energy required for interfacial decohesion in these systems and the simultaneous expression of high strength and toughness in tungsten heavy alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Yield strength of CeO 2 measured from static compression in a radial diamond anvil cell

Cerium oxide (ceria, CeO 2 ) is frequently used as a standard in applications such as synchrotron and x-ray free electron lasers for calibrating x-ray wavelengths and offers the potential for understanding the high pressure properties and deformation mechanisms in a wide range of similar face centered cubic (fcc) materials. In this study, the pressure dependence of the strength of ceria was investigated up to 38 GPa using angle dispersive x-ray diffraction in a radial geometry in a diamond anvil cell. In this experiment, the difference in the stress along the axis of compression and perpendicular to the direction of compression can be determined, giving a quantity known as the differential stress. It was found that the differential stress (t), a measure of the lower bound for yield strength, initially increases rapidly from 0.35 ± 0.06 GPa to 2.2 ± 0.4 GPa at pressures of 1.8 and 3.8 GPa, respectively. Above 4 GPa, t increases more slowly to 13.8 ± 2.6 GPa at a pressure of 38 GPa. The changes in the preferred orientation (texture) of CeO 2 with pressure were also measured, allowing for the determination of active deformation mechanisms using an elasto-viscoplastic self-consistent model (EVPSC). It was found that as pressure increased, the [001] direction had a slight preferred orientation along the axis of compression. Our EVPSC model of experimental fiber (cylindrically symmetric) textures and lattice strains were most consistent with dominant slip activity along ${111}$ $\langle$$1\bar10$$\rangle$.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Inference of strength and phase transition kinetics in dynamically-compressed tin

Dynamic compression experiments in condensed matter are of interest in part because they provide opportunities to examine material response under extreme conditions; however, the inference of material behavior from dynamic experiments is challenging in the presence of phase transitions exhibiting kinetic processes. Demonstrating an approach to quantitative interpretation of such dynamic experiments, here we present a Bayesian model calibration of strength and phase transformation parameters to data drawn from pulsed power and gas gun shot experiments. The posterior predictions of the Bayesian model capture the experimental measurements and account for the various uncertainties in the experimental configurations. This holistic approach to model calibration utilizing multiple types of experimental data identifies important cross correlations among kinetics, strength, and the phase boundary. Improved insight into potential sources of current model form error is provided by comparing the differences between calibrations against different subsets of the experimental data.

42 ENGINEERING↗
DOE OSTI2023

Temperature-dependent solvent reorganization entropies, free energies, and transition dipole strengths for the photoexcitation of Reichardt’s dye B30

Absorption spectra of the solvatochromic dye 2,6-diphenyl-4-2,4,6-triphenyl-1-pyridinophenolate (B30) were measured in seven solvents of varying polarity over temperature ranging from each solvent’s freezing point to 300 K. The excitation energies and their variances allowed calculations of the solvent reorganization energies, reorganization free energies and reorganization entropies as functions of temperature. The entropies of solvent packing around the chromophore are found to make major contributions to the reorganization free energies. The variances of the excitation energies depend only weakly on temperature, in disagreement with an expression that is often used for solvent reorganization free energies. Polar solvents reduce the transition dipole strength of B30’s long-wavelength absorption band, probably because interactions with the solvent enhance the charge-transfer character of the transition. The dipole strength drops further at low temperatures.

Chemistry↗
DOE OSTI2024

Shock compression of cemented tungsten carbides to 100 GPa: Structure of shock waves, Hugoniot relations, and strength

Plate impact experiments are conducted on cemented tungsten carbides (WC) with a 3.7 and 6.0 wt. % cobalt binder to better understand their dynamic, high-pressure response to 100 GPa. The measured wave profiles show propagation of steady structured waves. Standard impedance matching procedures are used to determine the Hugoniot relations in the shock velocity–particle velocity (U s –v p ) and Hugoniot stress–specific volume (P–V/V o ) planes. The Hugoniot elastic limit of the samples is controlled by ductility of the Co binder and is determined to be 4.45 ± 0.29 GPa for cemented WC with 3.7 wt. % cobalt and 3.72 ± 0.24 GPa for a 6.0 wt. % cobalt binder. Both grades show a non-linear U s –v p relationship depending on whether the particle velocity is in the strength dominated or hydrodynamic regime. In the strength dominated regime, a non-linear decrease in U s is observed as v p increases from ambient to the material’s hydrodynamic limit. In the hydrodynamic regime, the U s –v p Hugoniot is linear and is determined to be U s = 4.97(±0.006)+1.446(±0.018)v p km/s for WC with 3.7 wt. % Co and U s = 4.93(±0.006)+1.463(±0.017)v p km/s for 6 wt. % Co. Both WC grades indicate shear-stress hardening with mean stress immediately after yield, followed by pressure softening, and then a sharp fall in stress carrying capacity as the mean stress is increased to ≈70 GPa (hydrodynamic limit) and beyond. This behavior is in contrast to pure WC ceramics, which show continued shear-stress hardening with mean stress to ≈80 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamic and quasi-static strength of additively repaired aluminum

Additive manufacturing has the potential to repair high value components, saving significant time and resources; however, the level of reliability and performance of additive repairs is still relatively unknown. In this work, the structure–property and performance of laser wire additive manufacturing repairs in 1100 aluminum are investigated. Two types of intentional damage are inflicted on the samples and subsequently repaired with pulsed laser deposition additive manufacturing. Quasi-static (10 –3 s –1 ) and high strain-rate (10 –3 s –1 ) mechanical testing is carried out with in situ diagnostics and post-mortem imaging. The results show that while the quasi-static strength and ductility of samples with a repaired region are lower than a pristine sample, the dynamic strength under shock loading is comparable. This work highlights both the potential utility of additive manufacturing for repair purposes, the significant risk of compromised performance of additive parts under specific conditions, and the need to test at varying strain rates to fully characterize material performance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ramp-release experiments for strength measurements: Strain-rate dependence

This paper presents an enhanced analysis method for investigating material properties at high strain rates, extending the capability of established experimental techniques to gain more information. The ramp-release method has been applied to many experiments reported at high (≈10 5 − 10 6 s −1 ) strain-rates. More recent data gathered at the National Ignition Facility (NIF) has enabled higher (≈10 8 s −1 ) strain-rates to be studied. Here, we present an initial application of ramp-release analysis to NIF ramp-compression data, illustrating both the opportunities and the practical challenges of extending these methods to laser-driven platforms. The higher strain-rates accessed at the NIF mean that there is more strain-rate enhancement to strength, and the experimental configuration means that this enhancement is more readily seen in the data. This is enabled by the capability of avoiding peak-compression attenuation through the sample thickness with a designed hold period made possible by the pulse-shaping capability of NIF. We propose that this combination of experimental conditions and an enhanced analysis method enables the strain-rate enhancement to strength to be studied, and potentially for this to inform physics models at smaller scales than the continuum.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Shear Strength and Release of Large Cryogenic Pellets from the Barrel of a Shattered Pellet Injector for Disruption Mitigation

Shattered pellet injection (SPI) has been chosen as the baseline disruption mitigation system on ITER due to its ability to rapidly inject material deep into the plasma to greatly increase the plasma density and radiate the thermal energy. SPI utilizes a mechanical punch or high-pressure gas to release and accelerate a pellet that has been cryogenically desublimated in the barrel of a pipe gun. Various material injection combinations could possibly be implemented during different phases of a disruption event to radiate plasma energy, reduce electromagnetic loads on machine components, avoid the formation of runaway electrons, or to dissipate runaway electrons that form. Each injection phase could possibly utilize combinations of deuterium, neon, or argon. In this paper we outline experimental measurements of pellet material shear strength at SPI operating temperatures to understand the force needed to release SPI pellets. Deuterium, neon, argon, and deuterium-neon mixture pellets with diameters of 8.5, 12.5, and 15.7 mm are formed at a range of relevant gas pressures and temperatures and dislodged from the cold zone with a slow-moving piston driven by a motor. The slow-moving piston is kept above the triple point temperature of the material while the pellet is forming, then cooled to below the triple point temperature before contacting the pellet to minimize any thermal conduction to the pellet. The piston incorporates a load cell to measure the force applied when the pellet breaks away from the cold zone in the barrel.The ability of the gas and punch methods to exceed the shear strength of the studied pellet materials for release has been analyzed. High pressure gas delivered by fast opening valves produce pressure shock to the pellet due to supersonic expansion of the propellant gas. Pressure (and therefore, force) oscillations are present due to transverse density propagation throughout the breech volume. Mechanical punches deliver an impact force through a high-kinetic energy impact. The effect of the mechanical shock on the pellet has been explored and will be presented in this paper. Scaling to larger ITER size SPI pellets will be described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics

As-cast Al–20wt.% Si alloys were processed via laser rapid solidification (LRS) techniques to create eutectic microstructures with nanoscale interconnected, nanotwinned Si fibers. LRS morphologies exhibit higher flow stress, exceeding 800 MPa and uniform plastic deformation above 20% compared to as-cast alloy that fractures at strains below 8% at flow strength of approximately 200 MPa. The strengthening mechanisms of LRS morphologies are interpreted in terms of the interfacial constraints: increase in yield strength as well as strain hardening rate due to nanoscale confined slip in fibrous Al–Si eutectic, and load transfer and eventual plasticity in the nanoscale Si fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anisotropic strength behavior of single-crystal TATB

High-rate strength behavior plays an important role in the shock initiation of high explosives, with plastic deformation serving to localize heat into hot spots and as a mechanochemical means to enhance reactivity. Recent simulations predict that detonation-like shocks produce highly reactive nanoscale shear bands in the layered crystalline explosive TATB (1,3,5-triamino-2,4,6-trinitrobenzene), but the thresholds leading to this response are poorly understood. We utilize molecular dynamics to simulate the high-rate compressive stress–strain response of TATB, with a focus on understanding flow behavior. Here, the dependence of strength on pressure and loading axis (crystal orientation) is explored. The deformation mechanisms fall broadly into two categories, with compression along crystal layers activating a buckling/twinning mode and compression normal to the layers producing nanoscale shear bands. Despite the complexity of the underlying mechanisms, the crystal exhibits relatively straightforward stress–strain curves. Most of the crystal orientations studied show rapid strain softening following the onset of yielding, which settles to a steady flow state. Trajectories are analyzed using five metrics for local states and structural order, but most of these metrics yield similar distributions for these deformation mechanisms. On the other hand, a recently proposed measure of intramolecular strain energy is found to most cleanly distinguish between these mechanisms, while also providing a plausible connection with mechanochemically accelerated decomposition kinetics. Localization of intramolecular strain energy is found to depend strongly on crystal orientation and pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Non-intrusive measurement of magnetic field strengths in a low-pressure argon plasma using quantum beat spectroscopy

Abstract Accurate measurement of magnetic field strengths is critical in many plasma environments, ranging from astrophysical systems to fusion energy research. In this work, a non-perturbative laser-based optical diagnostic known as quantum beat spectroscopy is demonstrated to be good alternative for measuring the magnetic field strength in low-pressure laboratory plasmas. The technique is investigated using both ns and fs pulsed lasers in an argon plasma. Preliminary results for a helium plasma are also given. Zeeman-split J = 1 electron states with transitions from metastable states were identified and tested for neutral argon ( 2 P 1 / 2 o ) 4 p 2 [ 1 / 2 ] and neutral helium 1 s 3 p 1 P 1 o . Magnetic fields are measured with sub-Gauss precision at near single laser pulse acquisition rates.

Gilbert, Tyler J. (ORCID:0000000160400119)↗
DOE OSTI2026

Selective electron-phonon coupling strength from nonequilibrium optical spectroscopy: The case of MgB 2

The coupling between quasiparticles and bosonic excitations rules the energy transfer pathways in condensed matter systems. The possibility of inferring the strength of specific coupling channels from their characteristic timescales measured in nonequilibrium experiments is still an open question. Here, in this study, we investigate MgB 2 , in which conventional superconductivity at temperatures as high as 39 K is mediated by the strong coupling between the conduction electrons and the 𝐸 2⁢𝑔 phonon mode. By means of broadband time-resolved optical spectroscopy, we show that this selective electron-phonon coupling dictates the nonequilibrium optical response of MgB 2 at early times (<100 fs) after photoexcitation. Furthermore, based on an effective temperature model analysis, we estimate its contribution to the total electron-boson coupling function extracted from complementary equilibrium spectroscopy approaches, namely, optical reflectivity and angle-resolved photoemission spectroscopy. The coupling strength with the 𝐸 2⁢𝑔 phonon modes is thus estimated to be 𝜆 ≃ 0.56, which is approximately half of the total coupling constant, in agreement with 𝑎𝑏 initio calculations from the literature. As a benchmark, broadband time-resolved optical spectroscopy is performed also on the isostructural and nonsuperconducting compound AlB 2 , showing that the nonequilibrium optical response relaxes on a slower timescale due to the lack of strongly coupled phonon modes. Our findings demonstrate the possibility to resolve and quantify selective electron-phonon coupling from nonequilibrium optical spectroscopy.

Mor, Selene [Università Cattolica del Sacro Cuore,↗
DOE OSTI2020

Correlation strength and orbital differentiation across the phase diagram of plutonium metal

We compare the trends on the strength of electronic correlations across the different phases of elemental Pu focusing on its site and orbital dependence, using a combination of density functional theory (DFT) and dynamical mean-field theory (DMFT) calculations within the vertex corrected one crossing approximation. We find that Pu-5f states are more correlated in δ -Pu, followed by some crystallographic sites in α and β phases. In addition, we observe that Pu-5f 5/2 and Pu-5f 7/2 orbital differentiation is a general feature of this material, as is site differentiation in the low-symmetry phases. The Pu-5f 5/2 states show Fermi liquid like behavior, whereas the Pu-5f 7/2 states remaining incoherent down to very low temperatures. We correlate the correlation strength in the different phases to their structure and the Pu-5 f occupancy of their crystallographic sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Intermediate scattering potential strength in electron-irradiated YBa 2 Cu 3 O 7-δ from London penetration depth measurements

Temperature-dependent London penetration depth, λ(T), of a high quality optimally-doped YBa 2 Cu 3 O 7-δ single crystal was measured using tunnel-diode-resonator technique. Controlled artificial disorder was induced by low-temperature 20 K irradiation by 2.5 MeV electrons at two large doses of 3.8 x 10 19 and 5.3 x 10 19 electrons per cm 2 . The irradiation caused significant suppression of the superconductor's critical temperature, T c , from 94.6 K to 90.0 K, and to 78.7 K, respectively. The low-temperature behavior of λ(T) evolves from a T-linear in pristine state to a T 2 behavior after irradiation, expected for a line-nodal d-wave superconductor. However, the original theory that explained such behavior assumed a unitary limit of the scattering potential, whereas usually in normal metals and semiconductors, Born scattering is sufficient to describe the experiment. To estimate the scattering potential strength, we calculated the superfluid density, ρ s (t = T/T c ) = λ 2 (0)/λ 2 (T), varying the amount and strength of non-magnetic scattering using a self-consistent t-matrix theory. Fitting the obtained curves to a power law, ρ s = 1 - Rt n , and to a polynomial, ρ s = 1 - At - Bt 2 , and comparing the coefficients n in one set and A and B in another with the experimental values, we estimate the phase shift to be around 70 and 65°, respectively. We correlate this result with the evolution of the density of states with nonmagnetic disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Ab initio estimation of E 2 strengths in Li 8 and its neighbors by normalization to the measured quadrupole moment

For electric quadrupole (E2) observables, which depend on the large-distance tails of the nuclear wave function, ab initio no-core configuration interaction (NCCI) calculations converge slowly, making meaningful predictions challenging to obtain. Nonetheless, the calculated values for different E2 matrix elements, particularly those involving levels with closely-related structure (e.g., within the same rotational band) are found to be robustly proportional. This observation suggests that a known value for one observable may be used to determine the overall scale of E2 strengths, and thereby provide predictions for others. In particular, we demonstrate that meaningful predictions for E2 transitions may be obtained by calibration to the ground-state quadrupole moment. Here, we test this approach for well-measured low-lying E2 transitions in 7 Li and 9 Be, then provide predictions for transitions in 8 Li and 9 Li. In particular, we address the 2 + → 1 + transition in 8 Li, for which the reported measured strength exceeds ab initio Green's function Monte Carlo (GFMC) predictions by over an order of magnitude.

6 ≤ A ≤ 19↗
DOE OSTI2024

Effects of quasiparticle-vibration coupling on Gamow-Teller strength and 𝛽 decay with the Skyrme proton-neutron finite-amplitude method

We adapt the proton-neutron finite-amplitude method, which in its original form is an efficient implementation of the Skyrme quasiparticle random phase approximation, to include the coupling of quasiparticles to like-particle phonons. The approach allows us to add beyond-quasiparticle random-phase approximation correlations to computations of Gamow-Teller strength and 𝛽-decay rates in deformed nuclei for the first time. We test the approach in several deformed isotopes for which measured strength distributions are available. Furthermore, the additional correlations dramatically improve agreement with the data, and will lead to improved global 𝛽-decay rates.

Beta decay↗