Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Facile synthesis of efficient photocatalytic tantalum nitride nanoparticles

Graphical abstract: Tantalum nitride nanoparticles as a visible-light-driven photocatalyst prepared by a novel homogeneously chemical reduction of tantalum pentachloride using sodium in liquid ammonia and the morphologies, visible-light photocatalytic properties and stability of tantalum nitride nanoparticles were investigated. Highlights: ► Tantalum nitride nanoparticles have been prepared by a homogeneously chemical reduction. ► The crystal structure of tantalum nitride was determined by Rietveld refinement and XRD patterns. ► The Tantalum nitride nanoparticle size was in the range of 20–50 nm. ► Much high photocatalytic activities of Ta{sub 3}N{sub 5} nanoparticles were obtained under visible-light irradiation. -- Abstract: Tantalum nitride nanoparticles, as visible-light photocatalysts were synthesized by a two-step homogeneously chemical reduction without any polymers and templates. The well-crystallized Ta{sub 3}N{sub 5} nanoparticles with a range of 20–50 nm in size have been characterized by a number of techniques, such as XRD, XPS, SEM, TEM, BET and UV–Vis spectrum. Most importantly, the Ta{sub 3}N{sub 5} nanoparticles with good stability exhibited higher photooxidation activities in the water splitting and degradation of methylene blue under visible light irradiation than bulk Ta{sub 3}N{sub 5} particles and commercial P25 TiO{sub 2}, demonstrating that Ta{sub 3}N{sub 5} nanoparticle is a promising candidate as a visible-light photocatalyst.

36 MATERIALS SCIENCE↗

An emerging class of carbon materials: Synthesis and applications of carbon flowers

Porous carbon materials are widely applied in energy storage, gas adsorption, and catalysis applications because of their advantageous properties, such as high surface areas, tunable surface properties, chemical stability, high conductivity, and low cost. Recently, a flower-shaped carbon material, referred to as carbon flowers (CFs), has received attention as an emerging porous carbon material because of its unique shape. In this review, we summarize the synthetic strategies, characterization techniques, and formation mechanisms of CFs from various precursors. We also review the applications of CFs and their pros and cons. Last, we discuss challenges and perspectives for future development of CFs.

36 MATERIALS SCIENCE↗

Radioactive waste immobilization of Hanford sludge in magnesium potassium phosphate ceramic forms

Here, this paper evaluates immobilization of Hanford K-Basin tank sludge in magnesium potassium phosphate ceramic forms. The waste forms were produced using two simulated non-radioactive sludge streams, each with distinct characteristics and composition. Ceramicrete with wollastonite as filler was used as the matrix for this purpose. The resulting waste forms were tested for their mechanical properties, radiation stability, and leaching resistance. In another series of tests, the samples were vitrified in borosilicate glass and glass waste forms were produced. The Product Consistency Test, the American Nuclear Society's ANS 16.1 test, and the Toxicity Characteristic Leaching Procedure, which are used to develop waste acceptance criteria in the United States for permanent storage of treated waste, were used for evaluation of the leaching resistance of all waste forms.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In situ TEM observation of FCC Ti formation at elevated temperatures

Pure Ti traditionally exhibits the hexagonal closed packed (HCP) crystallographic structure under ambient conditions and the body centered cubic (BCC) structure at elevated temperatures. In addition to these typical structures for Ti alloys, the presence of a face centered cubic (FCC) phase associated with thin films, interfaces, or high levels of plastic deformation has occasionally been reported. Here in this paper we show that small FCC precipitates form in freestanding thin foils during in situ transmission electron microscope (TEM) heating and we discuss the potential origins of the FCC phase in light of the in situ observations. This FCC phase was found to be stable upon cooling and under ambient conditions, which allowed us to explore its mechanical properties and stability via nanomechanical in situ TEM testing. It was found that FCC platelets within the HCP matrix phase were stable under mechanical deformation and exhibited similar mechanical deformation behavior as the parent HCP phase.

36 MATERIALS SCIENCE↗

Additive manufacturing of highly dense anisotropic Nd–Fe–B bonded magnets

Extrusion based big area additive manufacturing process is utilized for fabrication of dense anisotropic bonded magnets. High loading fraction (≥70 vol%) of magnequench anisotropic Nd–Fe–B powder in nylon is used for preparing anisotropic bonded magnets. A higher energy product of ~143.2 kJ/m 3 is obtained for the post printed magnetic field aligned at 1 Tesla. These findings make an important step towards the fabrication of gap magnets with energy product between ferrite and Nd–Fe–B sintered magnets. Finally, printed bonded magnets exhibited better thermal stability, mechanical properties and superior magnetic properties compared to commercial injection molded magnets.

36 MATERIALS SCIENCE↗

Exploring Ca–Ce–M–O (M = 3d Transition Metal) Oxide Perovskites for Solar Thermochemical Applications

Solar thermochemical (STC) processes hold promise as efficient ways to generate renewable fuels, fuel precursors, or chemical feedstocks using concentrated sunlight. Specifically, one actively researched approach is the two-step STC cycle, which uses a redox-active, off-stoichiometric, transition-metal oxide material to split water and/or CO 2 , generating H 2 and/or CO, respectively, or syngas (a combination of H 2 and CO). Identifying novel metal oxides that yield larger reduction extents (practically achievable off-stoichiometries) than the state-of-the-art CeO 2 is critical. Here, we explore the chemical space of Ca–Ce–M–O (M = 3d transition metal, except Cu and Zn) metal oxide perovskites, with Ca and/or Ce occupying the A site and M occupying the B site within an ABO 3 framework, as potential STC candidates. We use density functional theory (DFT)-based calculations and systematically evaluate the oxygen vacancy (VaO) formation energy (≈ enthalpy of reduction in an STC cycle), electronic properties, thermodynamic stability of CaMO 3 , CeMO 3 , and Ca 0.5 Ce 0.5 MO 3 perovskites, and the VaO formation energy within Ca 0.5 Ce 0.5 Ti 0.5 Mg 0.5 O 3 perovskite. We consider only Ca and/or Ce on the A site because of their similar size and the potential redox activity of Ce 4+ . If both Ce and M exhibit simultaneous reduction with Va O formation, the resulting perovskite could exhibit a larger entropy of reduction than a single cation reduction. The increased entropy produces increased reduction for fixed temperature, partial pressure of oxygen, and reduction enthalpy, and therefore increased STC efficiency. Importantly, we identify Ca 0.5 Ce 0.5 MnO 3 , Ca 0.5 Ce 0.5 FeO 3 , and Ca 0.5 Ce 0.5 VO 3 to be promising candidates based on their Va O formation energy and thermodynamic (meta)stability. Moreover, based on our calculated on-site magnetic moments, electron density of states, and electron density differences between pristine and defective structures, we find Ca 0.5 Ce 0.5 MnO 3 to exhibit simultaneous reduction of both Ce 4+ (A-site) and Mn 3+ (B-site), highlighting a particularly promising candidate for STC applications with a predicted higher entropy of reduction than CeO 2 . Lastly, we extract metrics that govern the trends in Va O formation energies, such as standard reduction potentials, and provide pointers for further experimental and theoretical studies, which will enable the design of improved materials for the STC cycle.

14 SOLAR ENERGY↗

Thermally Evaporated Naphthalene Diimides as Electron Transport Layers for Perovskite Solar Cells

Thermally evaporated organic electron transport layers (ETLs) have the potential to enable high-performance and scalable perovskite solar cells (PSCs). Among these, naphthalene diimide (NDI)-based ETLs are a promising family of materials that exhibit the optoelectronic properties, ambient stability and versatility required of high-performance ETLs. Here, we synthesized five NDI derivatives with varying functional groups and identified the two most promising candidates for evaluating the impact of molecular structure on processability via thermal evaporation. While phosphonic acid functionalization was shown to introduce thermal instability, leading to chemical changes during evaporation, NDI-bis N-phenyl-bromide (NDI-(PhBr) 2 ) emerged as a promising ETL candidate. NDI-(PhBr) 2 demonstrated excellent compatibility with the thermal evaporation process and enabled PSCs with power conversion efficiencies (PCEs) of 15.6%, surpassing all previously reported PSCs containing thermally evaporated NDI ETLs. Furthermore, NDI-(PhBr) 2 exhibited excellent operational stability, retaining 75% of the initial PCE after 150 h of operation under continuous illumination at 65 °C. These results highlight the potential of NDI-based ETLs for advancing the scalability and performance of PSCs.

36 MATERIALS SCIENCE↗

Variable Surface Termination and Ligand Passivation of Lead Sulfide Nanocrystals Synthesized with Excess Lead Chloride

The surface termination and ligand passivation of semiconducting nanocrystals (NCs) impact the stability, optical properties, and self-assembly of NCs. In this work, we definitively characterize the surface of lead sulfide (PbS) NCs synthesized from excess PbCl 2 . With a combination of small-angle neutron scattering (SANS), photoluminescence, and 1D and 2D NMR experiments, we show that the surface termination of PbS NCs depends on the presence of PbCl 2 during ligand exchange. When excess PbCl 2 is removed prior to ligand exchange, PbS[RNH 3 + Cl – ] NCs are obtained, which are terminated by a monolayer of PbCl x on the {100} PbS facet and passivated by oleylammonium chloride ligands. On the other hand, when excess PbCl 2 remains in solution during ligand exchange, lead oleate forms and attaches to the {111} PbS facets of PbS[RNH 3 + Cl – ] NCs, creating PbS@PbCl x NCs. PbS@PbCl x NCs are coated in an epitaxial layer of PbCl x on both the {100} PbS and {111} PbS facets, making them 0.3–0.4 nm larger on average than PbS[RNH 3 + Cl – ] NCs with identical absorption wavelengths. Additionally, PbS@PbCl x NCs have a consistently higher photoluminescence quantum yield and longer photoluminescence lifetimes than PbS[RNH 3 + Cl – ] NCs. This study clarifies the surface structure of PbS NCs synthesized from excess PbCl 2 , highlighting ligand exchange strategies and reconciling observations from across the literature.

Anions↗

Iron Vacancies Accommodate Uranyl Incorporation into Hematite

Radiotoxic uranium contamination in natural systems and nuclear waste containment can be sequestered by incorporation into naturally abundant iron (oxyhydr)oxides such as hematite (-Fe2O3) during mineral growth. The stability and properties of the resulting uranium-doped material depend on the local coordination environment of incorporated uranium. While measurements of uranium coordination have been attempted using extended X-ray absorption fine structure (EXAFS) analysis, traditional shell-by-shell EXAFS fitting yields ambiguous results. We used hybrid functional ab initio molecular dynamics (AIMD) simulations for various defect configurations to generate EXAFS spectra which were fitted to experimental U L3-edge EXAFS for U6+-doped hematite. We discovered that the hematite lattice accommodates a trans-dioxo uranyl-like configuration for U6+ that substitutes for structural Fe3+, which requires two partially protonated Fe vacancies situated at opposing corner-sharing lattice sites. Surprisingly, the best match to experiment included significant proportions of vacancy configurations other than the minimum-energy configuration, pointing to the importance of incorporation mechanisms and kinetics over thermodynamics in determining the state of an impurity incorporated in a host phase under hydrothermal conditions.

McBriarty, Martin E.↗

Graphitic biocarbon from metal-catalyzed hydrothermal carbonization of lignin

Lignin is a high-volume byproduct from the pulp and paper industry and is currently burned to generate electricity and process heat. Moreover, the industry has been searching for high value-added uses of lignin to improve the process economics. In addition, battery manufacturers are seeking nonfossil sources of graphitic carbon for environmental sustainability. In our work, lignin (which is a cross-linked polymer of phenols, a component of biomass) is converted into graphitic porous carbon using a two-step conversion. Lignin is first carbonized in water at 300 °C and 1500 psi to produce biochar, which is then graphitized using a metal nitrate catalyst at 900–1100 °C in an inert gas at 15 psi. Graphitization effectiveness of three different catalysts—iron, cobalt, and manganese nitrates—is examined. The product is analyzed for morphology, thermal stability, surface properties, and electrical conductivity. Both temperature and catalyst type influenced the degree of graphitization. A good quality graphitic carbon was obtained using catalysis by Mn(NO 3 ) 2 at 900 °C and Co(NO 3 ) 2 at 1100 °C.

36 MATERIALS SCIENCE↗

Synthesis of Layered Gold Tellurides AuSbTe and Au 2 Te 3 and Their Semiconducting and Metallic Behavior

Previous studies on natural samples of pampaloite (AuSbTe) revealed the crystal structure of a potentially cleavable and/or exfoliable material, while studies on natural and synthetic montbrayite (Sb-containing Au 2 Te 3 ) claimed various chemical compositions for this low-symmetry compound. Few investigations of synthetic samples have been reported for both materials, leaving much of their chemical, thermal, and electronic characteristics unknown. Here, in this study, we investigate the stability, electronic properties, and synthesis of the gold antimony tellurides AuSbTe and Au 1.9 Sb 0.46 Te 2.64 (montbrayite). Differential thermal analysis and in situ powder X-ray diffraction revealed that AuSbTe is incongruently melting, while Au 1.9 Sb 0.46 Te 2.64 is congruently melting. Calculations of the band structures and four-point resistivity measurements showed that AuSbTe is a semiconductor and Au 1.9 Sb 0.46 Te 2.64 a metal. Various synthesis attempts confirmed the limited stable chemical composition of Au 1.9 Sb 0.46 Te 2.64 , identified successful methods to synthesize both compounds, and highlighted the challenges associated with single-crystal synthesis of AuSbTe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Uranium Redox Chemistry in Asymmetric Polyoxometalate Complexes: Access to U(IV), U(V), and Transient U(VI)

We report the synthesis and characterization of asymmetric sandwich-type complexes [TpU IV EW 11 O 39 ] x– (E = P; x = 4, E = Si; x = 5, Tp = trispyrazolylborate). These complexes represent rare examples of the selective formation of asymmetric actinide-polyoxometalate (An-POM) complexes. Oxidation studies show that the U V analogues are stable and accessible, with both complexes isolated. Attempts to access U VI with this framework yield mixed results. Attempts to produce [TpU VI PW 11 O 39 ] 2– only led to decomposition, while electrochemical oxidation experiments gave evidence of transient formation of [TpU VI SiW 11 O 39 ] 3– in solution. Rapid decomposition of [TpU VI SiW 11 O 39 ] 3– inhibits full characterization. These studies indicate that the redox properties and stability of An-POM complexes containing actinides in higher valencies are dependent on the anionic charge of the assembly.

Actinides↗

Viability of Lead-Free Perovskites with Mixed Chalcogen and Halogen Anions for Photovoltaic Applications

We assess the viability for photovoltaic applications of proposed Pb-free perovskites with mixed chalcogen and halogen anions, AB(Ch,X) 3 (A = Cs or Ba; B = Sb or Bi; Ch = chalcogen; X = halogen), by examining critical issues such as the structural, electronic/optical properties, and stability through the combination of density-functional theory calculations and solid state reactions. The calculations show that these quaternary Pb-free perovskites are thermodynamically unstable--they are prone to decompose into ternary and/or binary secondary phases or form phases with nonperovskite structures. Solid-state synthesis efforts confirm the theoretically predicted difficulty for preparing these compounds; all attempted reactions do not form the desired perovskite phases with mixed chalcogen and halogen anions under conditions examined. Instead, they form separate binary and ternary compounds. Despite earlier predictions of promising characteristics for these prospective perovskites for photovoltaics, our results suggest that, due to their instability, the Pb-free perovskites with mixed chalcogen and halogen anions may be challenging to form under equilibrium synthetic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Silico Prediction of Structural Properties of a Racemic Porous Organic Cage Crystal

Porous organic cage (POC) solids are porous materials made up of individual porous molecules held together by noncovalent forces. While many examples of POCs have been made in homochiral forms (i.e., crystals in which every molecule has the same chirality), crystallization of POCs that contain mixtures of chiral molecules can also yield useful properties. For example, our previous work has demonstrated that a POC crystal [cage crystal 3 (CC3)-racemic] synthesized using a racemic mixture of diaminocyclohexane has improved sorption properties and stability than a similar POC crystal synthesized with homochiral diaminocyclohexane. The main purpose of this paper is to predict the structure of CC3-racemic with atomic detail because it is challenging to fully resolve the structure of this racemic crystal experimentally since only subtle differences exist between the racemic structure and the known crystal structure of homochiral CC3. Here, we introduce an in silico prediction method that combines electronic structure calculations and atomistic calculations to predict the structure of CC3-racemic. We first enumerate types of cage molecules that can be present in this material and establish their concentrations. A key observation from these calculations is that CC3-racemic is not made up of only CC3-R and CC3-S molecules and that an additional class of heterochiral cages is also present. By studying the packing energy of cage pairs in CC3-racemic, a lattice model representation of the racemic crystal is developed and used in MC simulations to assess the structure of extended crystals. By expanding the lattice model into atomic detail, fully detailed CC3-racemic crystal models are obtained. These models provide the most thorough description available to date of the composition and cage packing of this interesting material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deuteration as a Means to Tune Crystallinity of Conducting Polymers

The effects of deuterium isotope substitution on conjugated polymer chain stacking of poly(3-hexylthiophene) is studied in this paper experimentally by X-ray diffraction (XRD) in combination with gel permeation chromatography and theoretically using density functional theory and quantum molecular dynamics. For four P3HT materials with different levels of deuteration (pristine, main-chain deuterated, side-chain deuterated, and fully deuterated), the XRD measurements show that main-chain thiophene deuteration significantly reduces crystallinity, regardless of the side-chain deuteration. The reduction of crystallinity due to the main-chain deuteration is a quantum nuclear effect resulting from a static zero-point vibrational energy combined with a dynamic correlation of the dipole fluctuations. The quantum molecular dynamics simulations confirm the interchain correlation of the proton–proton and deuteron–deuteron motions but not of the proton–deuteron motion. Thus and finally, isotopic purity is an important factor affecting stability and properties of conjugated polymer crystals, which should be considered in the design of electronic and spintronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Versatile Graphitized Carbon Nanofibers in Energy Applications

Graphitized carbon nanofibers (CNFs) are the allotropic forms of carbon that offer exceptional electrical conductivity, high aspect ratio, large surface-to-volume ratio, flexibility, mechanical robustness, and structural stability. These properties render CNFs as useful materials in energy applications, including water electrocatalysis and electrochemical energy storage devices (EESDs). Graphitized CNFs manifest huge versatility in EESDs and have been employed as electrode materials, as supports for other electrode materials, and conductive additives. This perspective summarizes the production methods, structural aspects, and energy applications of graphitized CNFs. Different design strategies have been employed to produce CNFs with diverse and distinct morphologies and structures. Their fabrication methods, along with precursors and dopants or cocatalysts, impact the overall structural, functional, and topographical properties. Recent developments on the state-of-the-art interests of graphitic CNFs in lithium-ion batteries (LIBs), lithium–sulfur (Li–S) batteries, vanadium redox flow batteries (VRFBs), supercapacitors, and water splitting have explored the many possibilities in energy sectors. Finally, the assembly and functioning of CNFs in water splitting and EESDs as well as primary challenges are discussed in this perspective.

36 MATERIALS SCIENCE↗

Ligand Desorption and Fragmentation in Oleate-Capped CdSe Nanocrystals under High-Intensity Photoexcitation

Semiconductor nanocrystals (NCs) offer prospective use as active optical elements in photovoltaics, light-emitting diodes, lasers, and photocatalysts due to their tunable optical absorption and emission properties, high stability, and scalable solution processing, as well as compatibility with additive manufacturing routes. Over the course of experiments, during device fabrication, or while in use commercially, these materials are often subjected to intense or prolonged electronic excitation and high carrier densities. The influence of such conditions on ligand integrity and binding remains underexplored. Here, in this study, we expose CdSe NCs to laser excitation and monitor changes in oleate that is covalently attached to the NC surface using nuclear magnetic resonance as a function of time and laser intensity. Higher photon doses cause increased rates of ligand loss from the particles, with upward of 50% total ligand desorption measured for the longest, most intense excitation. Surprisingly, for a range of excitation intensities, fragmentation of the oleate is detected and occurs concomitantly with formation of aldehydes, terminal alkenes, H 2 , and water. After illumination, NC size, shape, and bandgap remain constant although low-energy absorption features (Urbach tails) develop in some samples, indicating formation of substantial trap states. The observed reaction chemistry, which here occurs with low photon to chemical conversion efficiency, suggests that ligand reactivity may require examination for improved NC dispersion stability but can also be manipulated to yield desired photocatalytically accessed chemical species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗