Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “specific power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Nanoparticles of spinel and perovskite ferromagnets and prospects for their application in medicine

In this work, nanoparticles of La{sub 0.75}Sr{sub 0.25}MnO{sub 3} compounds with perovskite structure and AFe{sub 2}O{sub 4} (A = Mn, Fe, Co, Ni, Zn) with spinel structure have been synthesized by precipitation from diethylene glycol and microemulsion using Triton X-100 surfactant. Comparative X-ray diffraction and magnetic studies of the synthesized nanoparticles have been carried out. Magnetic fluids prepared from synthesized nanopowders have been characterized by calorimetric measurements of specific loss power (SLP)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stress measurements of planar dielectric elastomer actuators

Dielectric elastomer actuator (DEA) micro- and nano-structures are referred to artificial muscles because of their specific continuous power and adequate time response. The bending measurement of an asymmetric, planar DEA is described. The asymmetric cantilevers consist of 1 or 5 μm-thin DEAs deposited on polyethylene naphthalate (PEN) substrates 16, 25, 38, or 50 μm thick. The application of a voltage to the DEA electrodes generates an electrostatic pressure in the sandwiched silicone elastomer layer, which causes the underlying PEN substrate to bend. Optical beam deflection enables the detection of the bending angle vs. applied voltage. Bending radii as large as 850 m were reproducibly detected. DEA tests with electric fields of up to 80 V/μm showed limitations in electrode’s conductivity and structure failures. The actuation measurement is essential for the quantitative characterization of nanometer-thin, low-voltage, single- and multi-layer DEAs, as foreseen for artificial sphincters to efficiently treat severe urinary and fecal incontinence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nuclear-pumped laser operating in the master oscillator-amplifier regime

The efficiency of a master oscillator-amplifier scheme and the possibility of its using in multichannel nuclear-pumped laser systems are studied. The small-signal gain and saturation parameter are measured for the He:Ar:Xe = 380:380:1 mixture at a pressure of 1 atm at a wavelength of 2.03 {mu}m. It is shown that the small-signal gain increases linearly with the specific pump power density and achieves 1.1-1.2 m{sup -1} at a pump density of 40 W cm{sup -3}. The saturation parameter is almost independent of the pump power and is equal to 70-90 W cm{sup -2}. It is found that at the pump-pulse maximum (40 W cm{sup -3}) the laser radiation power increases after amplification by 100%. (active media, lasers, and amplifiers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Amplification and generation of radiation at the 4{sup 2{Gamma}} {yields} 1,2{sup 2{Gamma}} transition of the Kr{sub 2}F molecule in an electron-beam-pumped wide-aperture laser

The radiation amplification and oscillation are obtained in an electron-beam-pumped Berdysh laser with an active volume of 10 L in the visible range from 430 to 470 nm at the broadband 4{sup 2{Gamma}} {yields} 1,2{sup 2{Gamma}} transition in the triatomic Kr{sub 2}F molecule of interest for amplification of ultrashort laser pulses. It is shown that, along with absorption of laser radiation in the active medium, the amplification dynamics is considerably determined by short-lived absorption induced in the amplifier windows by bremsstrahlung X-rays. For the specific pump power 0.6 - 0.7 MW cm{sup -3}, the gain, corrected for nonstationary absorption, was {approx}10{sup -3} cm{sup -1}. A scheme of a Kr{sub 2}F amplifier is proposed for amplification of ultrashort pulses up to multiterawatt peak powers in the active volume {approx}10 L. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly efficient pulse-periodic XeCl lasers

The parameters of electric-discharge pulse-periodic XeCl lasers with a pulse duration of 25 - 40 ns, an energy of 0.2 - 0.7 J, and a pulse repetition rate up to 100 Hz have been investigated. It is shown that the total laser efficiency of 2.6 % and the maximum efficiency with respect to the stored energy of 3.8 % are obtained at a specific pump power of 2.8 - 3.3 MW cm{sup -3} and a discharge circuit inductance of 3.5 - 4 nH. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical characteristics of a HgBr excilamp

Optical characteristics of a coaxial HgBr excilamp on multicomponent mercury dibromide vapour mixtures with helium, nitrogen and sulfur hexafluoride are investigated under pumping by a pulse-periodic barrier discharge. Stable excilamp operation was demonstrated at a pump pulse repetition rate of 3 – 9 kHz. The component composition of the working system was determined, which provides a maximal average and pulsed specific radiation power of 48.8 mW cm{sup -3} and 40.6 W cm{sup -3}, respectively, at the efficiency of 7.3 % in the blue-green spectral range with the maximal radiation intensity at the wavelength of 502 nm. The reduction in the radiation power after 2.5 × 10{sup 6} shots is 5 %. Interpretation is given for the results of optimisation of excilamp characteristics. (optical radiation sources)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optically pumped rare-gas lasers

The modern state of the research of a new promising optically pumped laser system with an active medium formed by metastable rare-gas atoms is briefly reviewed. The kinetics of these media is similar to that of laser media based on alkali metal vapour; however, the gas medium is inert. Metastable atoms can be produced in an electric discharge. As in alkali lasers, the specific laser power output under atmospheric pressure can be several hundreds of watts per 1 cm{sup 3}. The lasing wavelengths lie in the near-IR range and fall in the transparency window of the terrestrial atmosphere. This new concept makes it possible to develop a closed-cycle cw laser with megawatt power levels and high beam quality. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Holographic patterning of high-performance on-chip 3D lithium-ion microbatteries

Significance Microscale batteries can deliver energy at the actual point of energy usage, providing capabilities for miniaturizing electronic devices and enhancing their performance. Here, we demonstrate a high-performance microbattery suitable for large-scale on-chip integration with both microelectromechanical and complementary metal-oxide–semiconductor (CMOS) devices. Enabled by a 3D holographic patterning technique, the battery possesses well-defined, periodically mesostructured porous electrodes. Such battery architectures offer both high energy and high power, and the 3D holographic patterning technique offers exceptional control of the electrode’s structural parameters, enabling customized energy and power for specific applications.

25 ENERGY STORAGE↗

An Acrobatic Substrate Metamorphosis Reveals a Requirement for Substrate Conformational Dynamics in Trypsin Proteolysis

The molecular basis of enzyme catalytic power and specificity derives from dynamic interactions between enzyme and substrate during catalysis. While considerable effort has been devoted to understanding how conformational dynamics within enzymes affect catalysis, the role of conformational dynamics within protein substrates has not been addressed. Here in this paper, we examine the importance of substrate dynamics in the cleavage of Kunitz-BPTI protease inhibitors by mesotrypsin, finding that the varied conformational dynamics of structurally similar substrates can profoundly impact the rate of catalysis. A 1.4 Å crystal structure of a mesotrypsin-product complex formed with a rapidly cleaved substrate reveals a dramatic conformational change in the substrate upon proteolysis. Using long all-atom molecular dynamics simulations of acyl-enzyme intermediates with proteolysis rates spanning three orders of magnitude, we identify global and local dynamic features of substrates on the ns-μs timescale that correlate with enzymatic rates and explain differential susceptibility to proteolysis. By integrating multiple enhanced sampling methods for molecular dynamics, we model a viable conformational pathway between substratelike and product-like states, linking substrate dynamics on the ns-μs timescale with large collective substrate motions on the much slower timescale of catalysis. Our findings implicate substrate flexibility as a critical determinant of catalysis.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluation of Phenylnaphthalenes as Heat Transfer Fluids for High Temperature Energy Applications

The thermodynamic properties of 1- and 2-phenyl substituted polyaromatic hydrocarbons have been measured and estimated under conditions relevant to heat transport applications almost to the critical point. Densities, vapor pressures, and heat capacity measurements were used to derive critical temperature, pressure and density for the phenylnaphthalenes. The thermal and radiolytic stability of 1-phenylnaphthalene was examined using thermogravimetric analysis, differential scanning calorimetery, and gamma irradiation. Low vapor pressure and resistance to thermal decomposition may make phenylnaphthalenes suitable for heat transfer applications involving parabolic solar collectors. In particular, 1-phenylnaphthalene has an advantage over high temperature inorganic salts for applications up to 800 K because it is a liquid at temperatures at or close to ambient. Thermal cycling would have to be restricted to temperatures below the critical point to avoid degradation of the fluid. Radiation stability was also tested by a 100 kGy irradiation of 1-phenylnaphthalene in a Co-60 irradiator. NMR analysis indicated 1.7 mol.% degradation, which although lower than observed for tributylphosphate/kerosene benchmark fluids for nuclear applications, is higher than that seen in imidazolium ionic liquids.

14 SOLAR ENERGY↗

Investigation of refractory black carbon-containing particle morphologies using the single-particle soot photometer (SP2)

An important source of uncertainty in radiative forcing by absorbing aerosol particles is the uncertainty in their morphologies (i.e., the location of the absorbing substance on/in the particles). To examine the effects of particle morphology on the response of an individual black carbon-containing particle in a Single-Particle Soot Photometer (SP2), a series of experiments was conducted to investigate black carbon-containing particles of known morphology using Regal black (RB), a proxy for collapsed soot, as the light-absorbing substance. Particles were formed by coagulation of RB with either a solid substance (sodium chloride or ammonium sulfate) or a liquid substance (dioctyl sebacate), and by condensation with dioctyl sebacate, the latter experiment forming particles in a core-shell configuration. Each particle type experienced fragmentation (observed as negative lagtimes), and each yielded similar lagtime responses in some instances, confounding attempts to differentiate particle morphology using current SP2 lagtime analysis. SP2 operating conditions, specifically laser power and sample flow rate, which in turn affect the particle heating and dissipation rates, play an important role in the behavior of particles in the SP2, including probability of fragmentation. This behavior also depended on the morphology of the particles and on the thermo-chemical properties of the non-RB substance. Although these influences cannot currently be unambiguously separated, the SP2 analysis may still provide useful information on particle mixing states and black carbon particle sources.

54 ENVIRONMENTAL SCIENCES↗

Constraining primordial magnetic fields with future cosmic shear surveys

The origin of astrophysical magnetic fields observed in galaxies and clusters of galaxies is still unclear. One possibility is that primordial magnetic fields generated in the early Universe provide seeds that grow through compression and turbulence during structure formation. A cosmological magnetic field present prior to recombination would produce substantial matter clustering at intermediate/small scales, on top of the standard inflationary power spectrum. In this work we study the effect of this alteration on one particular cosmological observable, cosmic shear. We adopt the semi-analytic halo model in order to describe the non-linear clustering of matter, and feed it with the altered mass variance induced by primordial magnetic fields. We find that the convergence power spectrum is, as expected, substantially enhanced at intermediate/small angular scales, with the exact amplitude of the enhancement depending on the magnitude and power-law index of the magnetic field power spectrum. Specifically, for a fixed amplitude, the effect of magnetic fields is larger for larger spectral indices. We use the predicted statistical errors for a future wide-field cosmic shear survey, on the model of the ESA Cosmic Vision mission Euclid, in order to forecast constraints on the amplitude of primordial magnetic fields as a function of the spectral index. We find that the amplitude will be constrained at the level of ∼ 0.1 nG for n{sub B} ∼ −3, and at the level of ∼ 10{sup −7} nG for n{sub B} ∼ 3. The latter is at the same level of lower bounds coming from the secondary emission of gamma-ray sources, implying that for high spectral indices Euclid will certainly be able to detect primordial magnetic fields, if they exist. The present study shows how large-scale structure surveys can be used for both understanding the origins of astrophysical magnetic fields and shedding new light on the physics of the pre-recombination Universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Reduced model for direct induction startup scenario development on MAST-U and NSTX-U

A reduced semi-empirical model using time-dependent axisymmetric vacuum field calculations is used to develop the prefill and feed-forward coil current targets required for reliable direct induction (DI) startup on the new MA-class spherical tokamaks, MAST-U and NSTX-U. The calculations are constrained by operational limits unique to each device, such as the geometry of the conductive elements and active coils, power supply specifications and coil heating and stress limits. The calculations are also constrained by semi-empirical models for sufficient breakdown, current drive, equilibrium and stability of the plasma developed from a shared database. A large database of DI startup on NSTX and NSTX-U is leveraged to quantify the requirements for achieving a reliable breakdown (I p ~ 20 kA). It is observed that without pre-ionization, STs access the large E/P regime at modest loop voltage (V loop ) where the electrons in the weakly ionized plasma are continually accelerating along the open field lines. This ensures a rapid (order millisecond) breakdown of the neutral gas, even without pre-ionization or high-quality field nulls. The timescale of the initial increase in I p on NSTX is reproduced in the reduced model provided a mechanism for impeding the applied electric field is included. Most discharges that fail in the startup phase are due to an inconsistency in the evolution of the plasma current (I p ) and equilibrium field or loss of vertical stability during the burn-through phase. Here, the requirements for the self-consistent evolution of the fields in the weakly and fully-ionized plasma states are derived from demonstrated DI startup on NSTX, NSTX-U and MAST. The predictive calculations completed for MAST-U and NSTX-U illustrate that the maximum I p ramp rate (dI p /dt) in the early startup phase is limited by the voltage limits on the poloidal field coils on MAST-U and passive vertical stability on NSTX-U.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Noise propagation issues in Belle II pixel detector power cable

The vertex detector used in the upgrade of High-Energy physics experiment Belle II includes DEPFET pixel detector (PXD) technology. In this complex topology the power supply units and the front-end electronics are connected through a PXD power cable bundle which may propagate the output noise from the power supplies to the vertex area. This article presents a study of the propagation of noise caused by power converters in the PXD cable bundle based on Multi-conductor Transmission Line (MTL) theory. The work exposes the effect of the complex cable topology and shield connections on the noise propagation, which has an impact on the requirements of the power supplies. This analysis is part of the electromagnetic compatibility based design focused on functional safety to define the shield connections and power supply specifications required to ensure the successful integration of the detector and, specifically, to achieve the designed performance of the front-end electronics.

42 ENGINEERING↗

Spin freezing into a disordered state in CaFeT i 2 O 6 synthesized under high pressure

Double perovskites exhibit a variety of interesting phenomena due to numerous combinations of cation orderings and distortions. CaMnTi 2 O 6 and CaFeTi 2 O 6 are the only two discovered double perovskites that have the columnar type A-site ordering associated with the a + a + c – titling system. The former perovskite, synthesized recently, has a polar structure below T c and shows an unusual ferroelectricity. The latter, while synthesized decades ago, received less investigation. Here, we have synthesized CaFeTi 2 O 6 under high pressure and carried out thorough characterizations through measurements of x-ray powder diffraction (XRD), second harmonic generation (SHG), dc and ac magnetization, Mössbauer spectra, resistivity, thermoelectric power, and specific heat. Although the structural refinement of the XRD pattern cannot distinguish two possible tetragonal phases, SHG measurements help to rule out the possibility of a polar structure observed in CaMnTi 2 O 6 . Fitting the paramagnetic susceptibility to a Curie-Weiss law gives a negligible Weiss constant. The weak exchange interaction gives way to a dipole-dipole interaction and single-ion anisotropy. An anomaly at 1.2 K in the specific heat is too broad for a magnetic transition, but suggestive of a spin-ice-like state as in the pyrochlores. Mössbauer spectroscopy shows two distinct iron sites, as expected for the crystal structure. Both sites are occupied by high-spin Fe 2+ as indicated by the isomer shift. The sharply different temperature dependence of the quadrupole splitting at the two iron sites can be well explained based on the local structural distortions from the refinement of XRD patterns. In conclusion, the line broadening associated with long spin-relaxation times is observed at 6 K as the spin freezing transition is approached from high temperatures.

36 MATERIALS SCIENCE↗

Irradiation Experiments on High Efficiency Nanowire Solar Cells Including Tilted Incidence Angle

Nanowire based solar cells have promising potential to become the next generation of space solar cells. In this study we corroborate their high radiation tolerance by irradiating high efficiency GaAs (efficiency > 15 %) nanowire solar cells with 1 MeV electrons at a fluence of 10 16 e - /cm 2 . Additionally, we theoretically show that the damage in nanowire solar cells is expected to be slightly dependent on the incidence angle and the geometry of the nanowire array. However, experimentally, two sets of GaAs nanowire solar cells have been irradiated with 1 MeV electrons at normal incidence and with a 25° tilted angle exhibiting a similar degradation.

high specific power↗

Energy absorption by a magnetic nanoparticle suspension in a rotating field

Heat generation by viscous dissipation in a dilute suspension of single-domain ferromagnetic particles in a rotating magnetic field is analyzed by assuming that the suspended particles have a high magnetic rigidity. The problem is solved by using a kinetic approach based on a rotational diffusion equation. Behavior of specific loss power (SLP) as a function of field strength H and frequency {omega} is examined at constant temperature. SLP increases as either of these parameters squared when the other is constant, eventually approaching a saturation value. The function SLP(H, {omega}) can be used to determine optimal and admissible ranges of magnetically induced heating.

36 MATERIALS SCIENCE↗

Analysis of applicability of triplet-state emission of molecular hydrogen for spectral diagnostics of a DC discharge

The applicability of emission of the N{sup 3}Λ{sub σ} triplet states of molecular hydrogen for spectral diagnostics of the positive column of a dc glow discharge in hydrogen at translational gas temperatures of 360–600 K, specific absorbed powers of 0.8–4.25 W/cm, gas pressures of p = 0.3–15.0 Torr, reduced fields of E/N = 30–130 Td, and electron densities of n{sub e} = 4.0 × 10{sup 9}–6.5 × 10{sup 10} cm{sup –3} is analyzed by using an advanced level-based semi-empirical collisional−radiative model. It is found that secondary processes make the main contribution to the population and decay of the N{sup 3}Λ{sub σ} = a{sup 3}Σ{sup +}{sub g}, c{sup 3}Π{sub u}, g{sup 3}Σ{sup +}{sub g}, h{sup 3}Σ{sup +}{sub g}, and i{sup 3}Π{sub g} triplet states. The dipole-allowed transitions e{sup 3}Σ{sup +}{sub g} → a{sup 3}Σ{sup +}{sub g}, f{sup 3}Σ{sup +}{sub g} → a{sup 3}Σ{sup +}{sub g}, g{sup 3}Σ{sup +}{sub g} and k{sup 3}Π{sub u} → a{sup 3}Σ{sup +}{sub g} can be used for spectral diagnostics of a dc discharge within a simplified coronal model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗