Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “soiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Computer simulation of a space SAR using a range-sequential processor for soil moisture mapping

The ability of a spaceborne synthetic aperture radar (SAR) to detect soil moisture was evaluated by means of a computer simulation technique. The computer simulation package includes coherent processing of the SAR data using a range-sequential processor, which can be set up through hardware implementations, thereby reducing the amount of telemetry involved. With such a processing approach, it is possible to monitor the earth's surface on a continuous basis, since data storage requirements can be easily met through the use of currently available technology. The Development of the simulation package is described, followed by an examination of the application of the technique to actual environments. The results indicate that in estimating soil moisture content with a four-look processor, the difference between the assumed and estimated values of soil moisture is within + or - 20% of field capacity for 62% of the pixels for agricultural terrain and for 53% of the pixels for hilly terrain. The estimation accuracy for soil moisture may be improved by reducing the effect of fading through non-coherent averaging.

Fujita, M.↗

Aircraft radar response to soil moisture

An analysis is presented of aircraft response to soil moisture in the upper surface layer of agricultural fields. Measurements (taken at 1.6 GHz and 4.75 GHz using HH and HV polarizations, and at 13.3 GHz using VV polarization from an experiment conducted in 1978 at Colby, Kansas) are used to derive the radar soil moisture sensitivities and correlations. It is shown that the aircraft response to soil moisture is optimum at C-band frequencies and incidence angles of 10-20 deg. confirming previous truck-radar results. Like-polarization radar response is unaffected by vegetation but is dependent on row-tillage patterns; cross-polarization response also is unaffected by vegetation but is approximately independent of tillage patterns. These results show that remote sensing radars can be used effectively for the detection and estimation of near-surface soil moisture in agricultural fields.

Bradley, G. A.↗

A multi-frequency radiometric measurement of soil moisture content over bare and vegetated fields

An experiment on soil moisture remote sensing was conducted during July to September 1981 on bare, grass, and alfalfa fields at frequencies of 0.6, 1.4, 5.0, and 10.6 GHz with radiometers mounted on mobile towers. The results confirm the frequency dependence of sensitivity reduction due to the presence of vegetation cover. For the type of vegetated fields reported here, the vegetation effect is appreciable even at 0.6 GHz. Measurements over bare soil show that when the soil is wet, the measured brightness temperature is lowest at 5.0 GHz and highest at 0.6 GHz, a result contrary to the expectation based on the estimated dielectric permittivity of soil-water mixtures and the current radiative transfer model in that frequency range.

Wang, J. R.↗

Petrology of Apollo 15 station 9A surface and drive tube soils

Modal analysis data are presented for six samples from the upper part of the Apollo 15 lunar core 15010/011 in order to further investigate the maturation profile of the core and to estimate the source rock contribution. The core data are compared with those of the adjacent soils 15531 and 15601. The soils analyzed are relatively immature and remarkably homogeneous. Surface soil 15531 is the most immature one, which is attributed to the fact that it was sampled from the rim of a relatively recent 3 m-diameter crater and thus contains an admixture of fresh bedrock material ejected by this cratering event. The major source of rock contribution to the soils is from petrographically identifiable mare basalts (about 89% to the core and to 15601 and about 87% to 15531). Olivine basalts and quartz normative basalts occur in an approximate ratio of 3:1; contributions of KREEP basalts and the Front are relatively minor.

Griffiths, S. A.↗

Compositional trends in Apollo 16 soils

Data on the bulk chemical composition of the soils collected at and under the surface of the Apollo 16 landing site are synthesized and reviewed, with emphasis placed on the way in which the compositional trends within the soils relate to the site geology. Two distinct compositional mixing trends are discerned. One involves addition to this surface Cayley component of a material such as that ejected by North Ray Crater. The other is thought to be a segment of a mixing line between the average melt fraction of the local Cayley component and pure or nearly pure anorthosite. Grain size fractions of Apollo 16 soils exhibit a general trend of higher concentrations of large ion lithophile (LIL) elements associated with plagioclase in the finest fraction compared with the coarse fractions. The suite of pristine nonmare rocks (as currently recognized) is found to be insufficient to model the Apollo 16 soils.

Korotev, R. L.↗

On compositional modeling of lunar highlands soils, including application to the orbiting gamma-ray experimental data

The compositions of remotely sensed highlands soils are compared with those of acquired highlands soils through the use of a compositional model. This model previously demonstrated its ability to describe compositions of acquired highlands soils with an accuracy approximating the present knowledge of the compositions. The principal question addressed here is whether the compositional end-members used to describe the acquired highlands soils are adequate to describe the remotely sensed ones or whether in some remotely sensed regions volumetrically significant components of different composition are required. Owing to the large analytical uncertainties in the gamma-ray data, only the presence of substantial proportions of significantly different components would be detectable by this (or any other) analysis of those data.

Haskin, L. A.↗

On the location of acid-hydrolysable carbon in lunar soil fines

Soil fines exposed on the lunar surface accumulate small metallic iron particles and solar wind-derived carbon. In previous work, it has been suggested that an intimate association exists between one particular carbon phase, hydrolysable carbon, and very fine iron droplets, where the carbon is in solid solution in the iron. The earlier hypothesis of a constant carbon in iron concentration across a broad range of droplet sizes is testable by combining hydrolysable carbon determinations with a variety of magnetic measurements sensitive to different droplet diameters. New measurements of ferromagnetic resonance response on density and magnetic separates from size fractions of soil 12023 are interpreted as evidence that hydrolysable carbon is preferentially associated with the larger, magnetically stable single-domain iron particles rather than with the smaller superparamagnetic droplets. For the former, there is a quite uniform ratio of iron to carbon both within a series of separates from a single soil, and among soils of widely varying FeO content.

Fallick, A. E.↗

Digital overlay of cartographic information on Landsat MSS data for soil surveys

Cartographic soils data were digitized, spatially registered, and merged with processed Landsat image data. The Landsat Multispectral Scanner Subsystem (MSS) image data were used to generate a thematic map representing different soil surface characteristics and an enhanced image. The thematic map was generated using supervised and unsupervised classification procedures. The enhanced image was generated by performing a linear contrast stretch on data altered by a principal components transformation. Although both procedures yielded images useful for soil unit delineation, image enhancement was determined to be more suitable because it was more expedient and inexpensive. Enhanced images cost $0.06 per hectare, spectral classifications cost $0.08 per hectare. The overlay of cartographic data on Landsat data facilitates comparisons between the various processing methods used for soil unit boundary determination, delineation, and verification. This technique also provides for accurate and expedient spatial referencing for field observations and cartographic correlation.

Imhoff, M. L.↗

Ecological optimality in water-limited natural soil-vegetation systems. II - Tests and applications

The long-term optimal climatic climax soil-vegetation system is defined for several climates according to previous hypotheses in terms of two free parameters, effective porosity and plant water use coefficient. The free parameters are chosen by matching the predicted and observed average annual water yield. The resulting climax soil and vegetation properties are tested by comparison with independent observations of canopy density and average annual surface runoff. The climax properties are shown also to satisfy a previous hypothesis for short-term optimization of canopy density and water use coefficient. Using these hypotheses, a relationship between average evapotranspiration and optimum vegetation canopy density is derived and is compared with additional field observations. An algorithm is suggested by which the climax soil and vegetation properties can be calculated given only the climate parameters and the soil effective porosity. Sensitivity of the climax properties to the effective porosity is explored.

Eagleson, P. S.↗

Assessment of radar resolution requirements for soil moisture estimation from simulated satellite imagery

Radar simulations were performed at five-day intervals over a twenty-day period and used to estimate soil moisture from a generalized algorithm requiring only received power and the mean elevation of a test site near Lawrence, Kansas. The results demonstrate that the soil moisture of about 90% of the 20-m by 20-m pixel elements can be predicted with an accuracy of + or - 20% of field capacity within relatively flat agricultural portions of the test site. Radar resolutions of 93 m by 100 m with 23 looks or coarser gave the best results, largely because of the effects of signal fading. For the distribution of land cover categories, soils, and elevation in the test site, very coarse radar resolutions of 1 km by 1 km and 2.6 km by 3.1 km gave the best results for wet moisture conditions while a finer resolution of 93 m by 100 m was found to yield superior results for dry to moist soil conditions.

Ulaby, F. T.↗

A model for estimating time-variant rainfall infiltration as a function of antecedent surface moisture and hydrologic soil type

Recent research indicates that the use of remote sensing techniques for the measurement of near surface soil moisture could be practical in the not too distant future. Other research shows that infiltration rates, especially for average or frequent rainfall events, are extremely sensitive to the proper definition and consideration of the role of the soil moisture at the beginning of the rainfall. Thus, it is important that an easy to use, but theoretically sound, rainfall infiltration model be available if the anticipated remotely sensed soil moisture data is to be optimally utilized for hydrologic simulation. A series of numerical experiments with the Richards' equation for an array of conditions anticipated in watershed hydrology were used to develop functional relationships that describe temporal infiltration rates as a function of soil type and initial moisture conditions.

Wilkening, H. A.↗

Advanced microwave soil moisture studies

Comparisons of low level L-band brightness temperature (TB) and thermal infrared (TIR) data as well as the following data sets: soil map and land cover data; direct soil moisture measurement; and a computer generated contour map were statistically evaluated using regression analysis and linear discriminant analysis. Regression analysis of footprint data shows that statistical groupings of ground variables (soil features and land cover) hold promise for qualitative assessment of soil moisture and for reducing variance within the sampling space. Dry conditions appear to be more conductive to producing meaningful statistics than wet conditions. Regression analysis using field averaged TB and TIR data did not approach the higher sq R values obtained using within-field variations. The linear discriminant analysis indicates some capacity to distinguish categories with the results being somewhat better on a field basis than a footprint basis.

Dalsted, K. J.↗

Resolution requirements for a soil moisture imaging radar

Image simulation techniques were employed to establish the relationship between spatial resolution and the accuracy of soil moisture estimated by an imaging radar. A spaceborne synthetic aperture radar at an orbital altitude of 600 km, operating at 4.5 GHz with HH polarization configuration and covering a ground swath width of 143 km corresponding to an angle of incidence range extending between 7-22 degrees relative to the vertical, provided the images simulated by a 17.7 km x 19.3 km test site. The role of resolution was evaluated by simulating various sets of images with resolutions ranging from 20 m x 20 m to 1 km x 1 km. Each simulated image was subjected to a soil moisture prediction algorithm whose input is limited to the image intensity level. Results show that the 1 km x 1 km resolution provides the best prediction accuracy for most soil moisture distributions except for drought-like conditions for which the 100 m x 100 m resolution is found to be preferred. In general it was found that the soil moisture of about 90% of the pixels is predicted with an error of + or - 20% of field capacity or less.

Dobson, C.↗

Combining land use data acquired from Landsat with soil map data

A method currently used to derive agrophysical units (APUs), i.e., geographical areas having definable/comparable agronomic and physical parameters which reflect a range in agricultural use and management, is discussed with reference to results obtained for South Dakota and an area in China. The method consists of combining agricultural land use data acquired from Landsat with soil map data. The resulting map units are soil associations characterized by cropland use intensity, and they can be used to identify major cropland areas and to develop a rating reflecting the relative potential of the soils in the delineated area for crop production, as well as to update small-scale soil maps.

Westin, F. C.↗

A numerical simulation of soil temperature and moisture variations for a bare field

The diurnal variations of soil temperature and moisture content were simulated for a bare agricultural field in the San Joaquin Valley in California. The simulation pertained to the first 72 hours of drying, from saturation, of a sandy, clay loam soil. The results were compared with measurements of soil temperature and moisture content made at the field. Calculated and measured values of soil temperature trends agreed in general, but model results of moisture trends did not replicate observed diurnal effects evident at depths 4 centimeters or more below the surface.

Schieldge, J. P.↗

The Apollo 14 regolith - Chemistry of cores 14210/14211 and 14220 and soils 14141, 14148, and 14149

Neutron activation analysis was performed on bulk and size fractions from drive tube specimens from 39 cm and 16.5 cm depths, and soil samples taken at the Apollo 14 landing site. Chemical data were obtained for 31 major, minor, and trace elements in the KREEPy soils. The cores were homogeneous in chemical composition, containing 20% LKFM, 15% mare basalt, 6% ANT, and 59% high-K KREEP, according to the classifications of Laul and Papike (1980). The meteoritic fraction was 3-7% for both cores, while the chemical compositions of both cores and soils were similar. Differences were detected in the fractions finer than 10 microns, which were more feldspathic than the coarser samples. The similarities between the grains 1000-90 micron in diam and less than 10 micron in diam, in terms of chemical contents, indicates that the observed agglutinates were derived from fusion of the finest grained fraction. The dominant soil-forming processes were comminution and vertical mixing of the regolith.

Laul, J. C.↗

Data documentation for the bare soil experiment at the University of Arkansas, June - August 1980

The primary objective of this study is to evaluate the relationships between soil moisture and reflectivity of a bare soil, using microwave techniques. A drainage experiment was conducted on a Captina silt loam in cooperation with personnel in the Electrical Engineering Department. Measurements included soil moisture pressures at various depths, neutron probe measurements, gravimetric moisture samples, and reflectivity of the soil surface at selected frequencies including 1.5 and 6.0 GHz and at the incident angle of 45 deg. All measurements were made in conjuction with that of reflectivity data.

Sadeghi, A. M.↗

CONSERVB: A numerical method to compute soil water content and temperature profiles under a bare surface

A comprehensive, yet fairly simple model of water disposition in a bare soil profile under the sequential impact of rain storms and other atmospheric influences, as they occur from hour to hour is presented. This model is intended mostly to support field studies of soil moisture dynamics by our current team, to serve as a background for the microwave measurements, and, eventually, to serve as a point of departure for soil moisture predictions for estimates based in part upon airborne measurements. The main distinction of the current model is that it accounts not only for the moisture flow in the soil-atmosphere system, but also for the energy flow and, hence, calculates system temperatures. Also, the model is of a dynamic nature, capable of supporting any required degree of resolution in time and space. Much critical testing of the sample is needed before the complexities of the hydrology of a vegetated surface can be related meaningfully to microwave observations.

Vanbavel, C. H. M.↗