Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “small scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Anisotropic microturbulence near the Sun

Interplanetary scintillation observations which sample the spatial spectrum of electron density at scales between 10 and 100 km show power-law spectra which are flatter than the Kolmogorov spectra observed at larger scales by spacecraft and also, indirectly, by phase scintillation of coherent radio signals. Furthermore, angular broadening observations of compact radio sources have shown that the microscale density fluctuations are field-aligned and become more anisotropic as R decreases inside 10 solar radius. We present angular broadening observations taken in October of 1992 which were recorded nearly simultaneously on the VLA and VLBA arrays. The VLA samples structure at scales between 3 and 30 km, whereas the VLBA samples scales between 200 and 4000 km. The small scale VLA measurements of the south polar source 1246-075 showed lower turbulence than those of the equatorial source 1256-057, consistent with previous work showing that the density delta N(exp 2)(sub e) is a factor of 10-15 lower in coronal holes. The VLA observations inside of 10 solar radius were anisotropic, as expected. We were not able to measure the equatorial source with the VLBA inside of 10 solar radius because the scattering was too strong, however we did observe the polar source just inside this distance with both the VLA and the VLBA. Significant anisotropy was seen on the smaller scales, but the larger scales were essentially isotropic. This suggests that the process responsible for the anisotropic microturbulence is distinct from the larger scale isotropic turbulence.

Coles, William A.↗

An Overview of the NASA FAP Hypersonics Project Airbreathing Propulsion Research

The propulsion research portfolio of the National Aeronautics and Space Administration Fundamental Aeronautics Program Hypersonics Project encompasses a significant number of technical tasks that are aligned to achieve mastery and intellectual stewardship of the core competencies in the hypersonic-flight regime. An overall coordinated programmatic and technical effort has been structured to advance the state-of-the-art, via both experimental and analytical efforts. A subset of the entire hypersonics propulsion research portfolio is presented in this overview paper. To this end, two programmatic research disciplines are discussed; namely, (1) the Propulsion Discipline, including three associated research elements: the X-51A partnership, the HIFiRE-2 partnership, and the Durable Combustor Rig, and (2) the Turbine-Based Combine Cycle Discipline, including three associated research elements: the Combined Cycle Engine Large Scale Inlet Mode Transition Experiment, the small-scale Inlet Mode Transition Experiment, and the High-Mach Fan Rig.

Auslender, A. H.↗

Strategy for Maturing Active Radiation Shielding Concepts

Active shielding strategies for protecting astronauts on exploration missions has long been a dream that proved evasive. Study after study since the early 1970’s has shown that solutions are both mass and power prohibitive. This talk will give an overview of current NASA work aimed at making advancements in the area of active shielding. The basic project premise is that we may have a better chance at success if we: (1) remove the constraint of having to reduce the exposure to zero, and instead focus on how to increase the number of ‘safe’ days in space according to the current NASA risk posture; (2) sub-divide the proton and heavy ion energy spectrum to identify a starting point in energy that may yield a non-negligible reduction in ion flux at power levels achievable with current technology, and; (3) develop methods to use scaling to build, test and mature small-scale shielding structures on the ground as a pathway to identifying technology development investment strategies. A top-level overview of these strategies will be presented during this talk.

Radiation Protection↗

The electron diffusion region and its relation to the larger-scale environment

The electron diffusion region forms the inner core of the magnetic reconnection machine. In this region, physical processes act to sustain a reconnection electric field, they accelerate to provide current density, and the heat to provide particle pressure in the current layer. The relative roles of these processes depend on whether the overall geometry is anti-parallel or asymmetric, and whether a guide field is present of not, but the overall concept applies in each case. The EDR is embedded in successively larger regions, starting with the ion diffusion region to even larger scales, where the plasma increasingly behaves like an anisotropic MHD plasma. With our new understanding of how the EDR works, it is of great interest to study how EDR processes couple to the larger scale environment. The ultimate efficacy of the magnetic reconnection is shaped by this interesting example of micro-macro coupling. In this presentation, we present some thoughts pertaining to this topic. In particular, we will discuss how information transport between scales is mediated, and how the very small scales can reach balance with the larger, overall system. We will review any pertinent research and present a set of questions inviting future research.

Michael Hesse↗

A dynamic localization model with stochastic backscatter

The modeling of subgrid scales in large-eddy simulation (LES) has been rationalized by the introduction of the dynamic localization procedure. This method allows one to compute rather than prescribe the unknown coefficients in the subgrid-scale model. Formally, the LES equations are supposed to be obtained by applying to the Navier-Stokes equations a 'grid filter' operation. Though the subgrid stress itself is unknown, an identity between subgrid stresses generated by different filters has been derived. Although preliminary tests of the Dynamic Localization Model (DLM) with k-equation have been satisfactory, the use of a negative eddy viscosity to describe backscatter is probably a crude representation of the physics of reverse transfer of energy. Indeed, the model is fully deterministic. Knowing the filtered velocity field and the subgrid-scale energy, the subgrid stress is automatically determined. We know that the LES equations cannot be fully deterministic since the small scales are not resolved. This stems from an important distinction between equilibrium hydrodynamics and turbulence. In equilibrium hydrodynamics, the molecular motions are also not resolved. However, there is a clear separation of scale between these unresolved motions and the relevant hydrodynamic scales. The result of molecular motions can then be separated into an average effect (the molecular viscosity) and some fluctuations. Due to the large number of molecules present in a box with size of the order of the hydrodynamic scale, the ratio between fluctuations and the average effect should be very small (as a result of the 'law of large numbers'). For that reason, the hydrodynamic balance equations are usually purely deterministic. In turbulence, however, there is no clear separation of scale between small and large eddies. In that case, the fluctuations around a deterministic eddy viscosity term could be significant. An eddy noise would then appear through a stochastic term in the subgrid-scale model and could be the source of backscatter.

Carati, Daniele↗

A comparison of wind tunnels suitable for rotorcraft noise studies

Many good small scale facilities are available for rotorcraft noise research. Ames 40 x 80/80 x 120 probably is a good large scale facility for acoustic research of large or small rotorcraft, but the acoustic quality of the modified facility was not yet measured. DNW is probably the best aeroacoustic facility, but may be expensive. Other parameters to consider besides background noise are turbulent level and scale, restructed measurement field, local reflections, and speed range. Advanced measurement techniques improve data quality from any facility.

Soderman, P. T.↗

Characterization and Performance of a Kilo-TES Sub-Array for ACTPol

ACTPol is a polarization-sensitive receiver upgrade to the Atacama CosmologyTelescope (ACT) which will make millimeterwavelength measurements of the small-scale polarization anisotropies of the cosmic microwave background to investigate the properties of inflation, dark energy, dark matter, and neutrinos in the early Universe. ACTPol will employ three arrays of transition edge sensor (TES) bolometer detectors. The detectors, with a target transition temperature of 150 mK, will be operated at a bath temperature of 100 mK provided by a dilution refrigerator. One array operating at a central frequency of 150 GHz and consisting of 1024 TESes achieved first light at the ACT site in July 2013. We anticipate fielding the remainder of the focal plane, consisting of a second 150 GHz array and a multi-chroic array sensitive to 90 and 150 GHz, at the end of the 2013 observing season. In these proceedings, we present characterization of key detector parameters from measurements performed on the first array both in the lab and during initial field testing. We comment on the design goals, measurements, and uniformity of the detector transition temperatures, saturation powers, and thermal conductivities while detailing measurement methods and results for the detector optical efficiencies and time constants.

neutrinos↗

Potential applications of NASA-developed technology to problems of the environment.

The life-support mission of NASA has the same broad objectives as the national imperatives toward environmental restoration: pure air, clean water, and reuse of resources. The major difference is the vast scale of the environment, compared to the very small scale of spacecraft, even including the largest space stations now projected. For this reason, the devices developed for manned spacecraft life support will be of much less interest than the techniques that have emerged from NASA-sponsored research and development. Several immediate applications in air and water purification can be cited, and several other long-term potential applications may also be considered.

Ross, L. W.↗

Investigation of gaseous nuclear rocket technology

The experimental and theoretical investigations conducted during the period from September 1969 through September 1972 are reported which were directed toward obtaining information necessary to determine the feasibility of the full-scale nuclear light bulb engine, and of small-scale nuclear tests involving fissioning uranium plasmas in a unit cell installed in a driver reactor, such as the Nuclear Furnace. Emphasis was placed on development of RF simulations of conditions expected in nuclear tests in the Nuclear Furnace. The work included investigations of the following: (1) the fluid mechanics and containment characteristics of one-component and two-component vortex flows, both unheated and RF-induction heated; (2) heating of particle-seeded streams by thermal radiation from a dc arc to simulate propellant heating; (3) condensation and separation phenomena for metal-vapor/heated-gas mixtures to provide information for conceptual designs of components of fuel exhaust and recycle systems; (4) the characteristics of the radiant energy spectrum emitted from the fuel region, with emphasis on definition of fuel and buffer-gas region seed systems to reduce the ultraviolet radiation emitted from the nuclear fuel; and (5) the effects of nuclear radiation on the optical transmission characteristics of transparent materials.

Kendall, J. S.↗

Characteristics of a gelled liquid hyprogen polyphenylene oxide (PPO) foam open-cell insulation system, phase 1

A large scale gel production and storage facility and a small scale facility, the latter used for detailed visual examination of the gel/PPO foam interface, were developed. A subcontract was given to investigate techniques for the production of gelled liquid hydrogen, develop a process design for scale-up to a 1.89 cu m (500 gallon) gel production and storage facility, determine gel transfer characteristics, determine the solubility rate of gaseous helium in the gel, and investigate the gross gel/PPO foam interfacial phenomena. An inside-tank process for scaled-up production of gelled liquid hydrogen was selected. No detectable gel structure degradation occurred during repeated shearing. The viscosity of gelled liquid hydrogen at shear rates of 300/sec and higher is 2 to 5-fold greater than that of neat liquid hydrogen. No clogging problems were encountered during the transfer of gelled liquid hydrogen through warmed transfer lines. The solubility rate of helium in liquid hydrogen was significantly reduced by the presence of gel structure. The boil-off rates from gelled liquid hydrogen were reduced from 25 to 50 percent compared to those observed for the neat liquid hydrogen under compatible conditions. The polyphenylene oxide (PPO) foam insulation was found to be compatible with liquid ethane.

Source record↗

The speed of wave-wave interactions in the atmosphere

Resonant wave-wave interactions are considered. Studies of the interaction coefficient show that rapid transfer of wave action can take place in the disjoined parts of the spectrum for three processes, namely: elastic scattering, parametric subharmonic instability and induced diffusion. Of the three processes, the vertical shear plays a role in two. The vertical shear of a moderate scale interacts through elastic scattering to make the spectrum vertically symmetric. On the other hand, the vertical shear of a large scale interacts through induced diffusion and is responsible for diffusion in k sub z space. When interacting with a vertical shear, it is known that the vertical shear acts as a catalyst and is not involved in energy transfer. Consequently, in both elastic scattering and induced diffusion, the vertical shear does not gain or lose energy. Through parametric subharmonic instability the more energetic large-scale waves are feeding energy into moderate and small scale waves of an elevation angle of 60 deg or larger.

Yeh, K. C.↗

Auroral E-fields from DE-1 and -2 at magnetically conjugate points

The results of studies of the electric field measurements from the two Dynamics Explorer satellites are reviewed. There are times at which DE-2 measured electric fields at the auroral ionosphere while DE-1 obtained nearly simultaneous measurement at a higher altitude on the same magnetic field lines. When these electric fields are mapped to a common altitude it is found that the large-scale electric fields are similar, but the small-scale electric fields have a larger amplitude at the higher altitude. Through the use of Fourier analysis it is shown that these results are evidence for a magnetic field-aligned potential drop between the two satellites. While these results were made possible by the satellites' altitude separation, it is also possible to take advantage of the fact that the satellites may pass through the same geomagnetic location with a time separation. This was useful for confirming that sinusoidal electric field oscillations which were detected near one conjunction were due to spatial rather than temporal variations, since similar oscillations were found at the same location at different times. The observed spatial oscillations can be explained by a simple model of magnetosphere-ionosphere coupling.

Weimer, D. R.↗

The fuelling of active galactic nuclei

Accretion mechanisms for powering the central engines of active galactic nuclei (AGN) and possible sources of fuel are reviewed. It is a argued that the interstellar matter in the main body of the host galaxy is channeled toward the center, and the problem of angular momentum transport is addressed. Thin accretion disks are not a viable means of delivering fuel to luminous AGN on scales much larger than a parsec because of the long inflow time and effects of self-gravity. There are also serious obstacles to maintaining and regulating geometrically thick, hot accretion flows. The role of nonaxisymmetric perturbations of the gravitational potential on galactic scales and their triggers is emphasized. A unified model is outlined for fueling AGN, in which the inflow on large scales is driven by gravitational torques, and on small scales forms a mildly self-gravitating disk of clouds with inflow driven by magnetic torques or cloud-cloud collisions.

Shlosman, Isaac↗

The nature of triad interactions in homogeneous turbulence

A decomposition of the velocity field in terms of helical modes is used to investigate nonlinear interactions in homogeneous turbulence. In a single-triad interaction, the large-scale helical mode is unstable when the small-scale modes have helicities of opposite signs (class 'F', for 'forward'), and the medium scale is otherwise unstable (class 'R', for 'reverse'). It is proposed that, on average, the triple correlations in a turbulent flow correspond to these unstable states. In the limit of nonlocal triads, where one leg is much smaller than the other two, the triadic interscale energy transfer is largest for interactions of class 'R'. The physical processes associated with both classes of interactions are discussed. It is shown that the large local transfers due to nonlocal 'R' interactions appear in pairs of opposite signs that nearly cancel each other and the net effect corresponds to an advection in wave space.

Waleffe, Fabian↗

Numerical simulation using vorticity-vector potential formulation

An accurate and efficient computational method is needed for three-dimensional incompressible viscous flows in engineering applications. On solving the turbulent shear flows directly or using the subgrid scale model, it is indispensable to resolve the small scale fluid motions as well as the large scale motions. From this point of view, the pseudo-spectral method is used so far as the computational method. However, the finite difference or the finite element methods are widely applied for computing the flow with practical importance since these methods are easily applied to the flows with complex geometric configurations. However, there exist several problems in applying the finite difference method to direct and large eddy simulations. Accuracy is one of most important problems. This point was already addressed by the present author on the direct simulations on the instability of the plane Poiseuille flow and also on the transition to turbulence. In order to obtain high efficiency, the multi-grid Poisson solver is combined with the higher-order, accurate finite difference method. The formulation method is also one of the most important problems in applying the finite difference method to the incompressible turbulent flows. The three-dimensional Navier-Stokes equations have been solved so far in the primitive variables formulation. One of the major difficulties of this method is the rigorous satisfaction of the equation of continuity. In general, the staggered grid is used for the satisfaction of the solenoidal condition for the velocity field at the wall boundary. However, the velocity field satisfies the equation of continuity automatically in the vorticity-vector potential formulation. From this point of view, the vorticity-vector potential method was extended to the generalized coordinate system. In the present article, we adopt the vorticity-vector potential formulation, the generalized coordinate system, and the 4th-order accurate difference method as the computational method. We present the computational method and apply the present method to computations of flows in a square cavity at large Reynolds number in order to investigate its effectiveness.

Tokunaga, Hiroshi↗

The Angular Power Spectrum of BATSE 3B Gamma-Ray Bursts

We compute the angular power spectrum C(sub l) from the BATSE 3B catalog of 1122 gamma-ray bursts and find no evidence for clustering on any scale. These constraints bridge the entire range from small scales (which probe source clustering and burst repetition) to the largest scales (which constrain possible anisotropics from the Galactic halo or from nearby cosmological large-scale structures). We develop an analysis technique that takes the angular position errors into account. For specific clustering or repetition models, strong upper limits can be obtained down to scales l approx. equal to 30, corresponding to a couple of degrees on the sky. The minimum-variance burst weighting that we employ is visualized graphically as an all-sky map in which each burst is smeared out by an amount corresponding to its position uncertainty. We also present separate bandpass-filtered sky maps for the quadrupole term and for the multipole ranges l = 3-10 and l = 11-30, so that the fluctuations on different angular scales can be inspected separately for visual features such as localized 'hot spots' or structures aligned with the Galactic plane. These filtered maps reveal no apparent deviations from isotropy.

Tegmark, Max↗

A Global Aerosol Model Forecast for the ACE-Asia Field Experiment

We present the results of aerosol forecast during the Aerosol Characterization Experiment (ACE-Asia) field experiment in spring 2001, using the Georgia Tech/Goddard Global Ozone Chemistry Aerosol Radiation and Transport (GOCART) model and the meteorological forecast fields from the Goddard Earth Observing System Data Assimilation System (GEOS DAS). The aerosol model forecast provides direct information on aerosol optical thickness and concentrations, enabling effective flight planning, while feedbacks from measurements constantly evaluate the model, making successful model improvements. We verify the model forecast skill by comparing model predicted total aerosol extinction, dust, sulfate, and SO2 concentrations with those quantities measured by the C-130 aircraft during the ACE-Asia intensive operation period. The GEOS DAS meteorological forecast system shows excellent skills in predicting winds, relative humidity, and temperature for the ACE-Asia experiment area as well as for each individual flight, with skill scores usually above 0.7. The model is also skillful in forecast of pollution aerosols, with most scores above 0.5. The model correctly predicted the dust outbreak events and their trans-Pacific transport, but it constantly missed the high dust concentrations observed in the boundary layer. We attribute this missing dust source to the desertification regions in the Inner Mongolia Province in China, which have developed in recent years but were not included in the model during forecasting. After incorporating the desertification sources, the model is able to reproduce the observed high dust concentrations at low altitudes over the Yellow Sea. Two key elements for a successful aerosol model forecast are correct source locations that determine where the emissions take place, and realistic forecast winds and convection that determine where the aerosols are transported. We demonstrate that our global model can not only account for the large-scale intercontinental transport, but also produce the small-scale spatial and temporal variations that are adequate for aircraft measurements planning.

Chin, Mian↗