Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46

Trajectory design of a solar electric propulsion Encke slow flyby mission

A slow flyby of the periodic comet, Encke, prior to its perihelion passage in 1980 has been shown to be a feasible mission for a solar electric propulsion spacecraft using a moderate power level of around 15 kw. The mission is accomplished in slightly less than two years with a planned miss distance and flyby speed of 1000 km and 4 km/s respectively. The results of a performance tradeoff study are presented together with a description of the nominal trajectory. The trajectories used in these mission studies were calculated using an updated model of the 30 cm mercury bombardment thruster's performance. The trajectory simulations include optimum staging of operating thrusters as a function of input power level constraints and limits on the variation of thruster specific impulse and efficiency as a function of thruster input power.

Sauer, C. G., Jr.↗

The very slow nova He 3-558

The emission-line object He 3-558 has been found to be a very slow nova which rose to maximum brightness in 1948 and is probably still fading. Its spectrum and light curve are described, and a distance of 3.5 kpc is derived. No sign of an earlier outburst was found in the Harvard collection of photographs.

Henize, K. G.↗

Estimation of Ksub Ic from slow bend precracked Charpy specimen strength ratios

Strength ratios are reported which were derived from slow bend tests on 0.25 inch thick precracked Charpy specimens of steels, aluminum alloys, and a titanium alloy for which valid K sub Ic values were established. The strength ratios were used to develop calibration curves typical of those that could be useful in estimating K sub Ic for the purposes of alloy development of quality control.

Succop, G.↗

Determination of the interaction impedance of coupled cavity slow wave structures

The interaction impedance of coupled cavity slow wave structures can be measured by perturbing the resonances of a shorted length of the structure using a dielectric rod. An analysis of this procedure is presented. The analysis retains radial as well as axial electric fields and all significant space harmonics. The results obtained are easily programmed formulas for calculating total interaction impedance or Pierce impedance using the experimental data.

Connolly, D. J.↗

Wave speeds and slowness surface in elastic-plastic media obeying Tresca's yield condition

With the coordinate axes chosen along the principal axes of the stress, the plastic wave speeds c(f) and c(s) depend on the direction of propagation, not on the stress components. The directions along which c(f) and c(s) assume the largest and smallest values are determined. A means of determining the slowness surface when the coordinate axes are not along the principal axes of stress is presented.

Ting, T. C. T.↗

The slow recirculating flow near the rear stagnation point of a wake

A model is suggested in which some of the important features of the circulating flow inside the two-dimensional near wake are derived by assuming a slow viscous flow. The theory considers the flow away from the body base. It is found that there is a region of constant speed merging, as we go downstream, into a region of stagnation-apex flow. The velocity returning from the rear stagnation point along the center streamline is shown to be a slowly varying function of the 'wedge-angle,' of the wake and to be roughly one half the velocity at the edge of the shear layers driving the wake-cavity flow. These results seem to be in agreement with experimental data.

Abarbanel, S.↗

Slow scan SEC vidicon system

A slow scan SEC vidicon system is described here. This system is coupled to the 152.4-cm (60-in) McMath telescope at Kitt Peak National Observatory. An anamorphic lens system is used to couple optically the vertical spectrograph to the vidicon system. The resolutin of the over-all system is 55 mA, while the resolution of the spectrograph alone is 50 mA. Actual observational results are used to evaluate the system performance.

Chiu, H.-Y.↗

Estimation of K/Ic/ from slow bend precracked Charpy specimen strength ratios

Data are presented concerning strength ratios which have been derived from slow bend tests on 0.25-in.-thick precracked Charpy specimens of steels, aluminum alloys, and a titanium alloy for which valid K(Ic) values have been established. The K(Ic) values considered are plane strain fracture toughness values as defined in the ASTM Method E 399-74. The strength ratios are used to develop calibration curves which could be useful in estimating K(Ic) for the purposes of alloy development or quality control.

Succop, G.↗

Yield spectra and the continuous-slowing-down approximation

The continuous-slowing-down approximation (CSDA) and the modified discrete-energy-bin (MDEB) method are used to calculate a yield spectra U(E, E sub 0) of electrons with energy E resulting from a primary of energy E sub 0. The results of the two calculations are then compared. The MDEB method is found to produce consistently more ions per energy loss while at the same time producing less excitations of some of the low-lying states when compared with the CSDA. These discrepancies can be explained by studying the contributions from the individual generations of electrons to the yield spectra. An integral equation for the solution of the yield spectra is also presented.

Jackman, C. H.↗

Orbital changes of the gaseous ring around Be stars. II - Apsidal motion and slow drift of the orbital elements

It is shown that the observed data about the apsidal motion of gaseous rings around some Be stars, like Beta(1) Mon and Pi Aqr, cannot be explained solely by the influence of the equatorial bulge. This fact has prompted the development of a theory of apsidal motion and slow drift of orbital elements that is based on the mixing of slowly escaping gases from the central star with gases in the emission ring around it. Thus, the basic physical idea in this paper follows closely what has been advanced in the first paper of this series but the mathematical treatment has been broadened in order to deal with the actual orbits, instead of osculating orbits, of particles in the ring. In accordance with this theory, it is believed that in cases where no mixing of gases takes place, the apsidal motion is controlled solely by the equatorial bulge. But in cases where mixing takes place, the apsidal motion depends upon the manner of gas mixing as well.

Huang, S.-S.↗

A slow response temperature controller

The circuit diagram for a temperature controller for use with very fast-acting (low thermal mass) furnace systems is presented and its features described. The operation of the slow response temperature controller is discussed.

Mullins, O.↗

Influence of thermomechanical processing on elevated temperature slow plastic flow properties of B2 aluminide Fe-39.8at.% Al

A study of the elevated temperature slow plastic flow properties of the B2 aluminide Fe-39.8at.% Al was undertaken. Polycrystalline materials possessing several different microstructures were produced by the hot extrusion of prealloyed powder and, in some cases, postextrusion heat treatments. Compression tests were conducted in air at 1200, 1300 and 1400 K. Such testing revealed that the extrusion temperature affected the active deformation mechanisms where material extruded at 1505 K had a stress exponent about twice that of the intermetallic extruded at 1200 K. Grain size refinement to about 10 microns was found to strengthen the Fe-39.8at.% Al material; unfortunately, the effectiveness of such strengthening is limited to a homologous temperature of about 0.75 for strain rates of commercial interest (less than 10 to the -7th/sec).

Whittenberger, J. D.↗

The average solar wind in the inner heliosphere: Structures and slow variations

Measurements from the HELIOS solar probes indicated that apart from solar activity related disturbances there exist two states of the solar wind which might result from basic differences in the acceleration process: the fast solar wind (v 600 kms(-)1) emanating from magnetically open regions in the solar corona and the "slow" solar wind (v 400 kms(-)1) correlated with the more active regions and its mainly closed magnetic structures. In a comprehensive study using all HELIOS data taken between 1974 and 1982 the average behavior of the basic plasma parameters were analyzed as functions of the solar wind speed. The long term variations of the solar wind parameters along the solar cycle were also determined and numerical estimates given. These modulations appear to be distinct though only minor. In agreement with earlier studies it was concluded that the major modulations are in the number and size of high speed streams and in the number of interplanetary shock waves caused by coronal transients. The latter ones usually cause huge deviations from the averages of all parameters.

Schwenn, R.↗

Physiological changes in fast and slow muscle with simulated weightlessness

A rat hindlimb suspension model of simulated weightlessness was used to examine the physiological characteristics of skeletal muscle. The physiological sequelae of hindlimb suspension were compared to those of spinal cord section, denervation by sciatic nerve crush, and control. Muscle examined were the predominantly slow (Type 1) soleus (SOL) and the predominantly fast (Type 2) extensor digitorum longus (EDL). Two procedures which alter motor unit activity, hindlimb suspension and spinal cord section, produce changes in characteristics of skeletal muscles that are dependent upon fiber type. The SOL develops characteristics more representative of a fast muscle, including smaller Type 1 fiber proportion and higher AChE activity. The EDL, which is already predominantly fast, loses most of its few Type 1 fibers, thus also becoming faster. These data are in agreement with the studies in which rats experienced actual weightlessness.

Dettbarn, W. D.↗

The quasi-static (slow-flow) region of the magnetosphere

In the present treatment of the theory of the earth's inner and middle magnetosphere, attention is given to the region earthward and equatorward of the magnetopause and its associated boundary layers in the case of the magnetosphere's dayside, while with regard to the night side, the part of the inner plasma sheet which lies on closed magnetic field lines that experience only those flows that are slow (by comparison to the fast mode speed) are considered. The theoretically determined boundaries of the region discussed are all magnetic field-aligned, since the theory treats each magnetic field line and the particles on it as a discrete entity due to the ease with which the particles and electric currents flow along the magnetic field.

Wolf, R. A.↗

Evidence for slow-mode shocks in the deep geomagnetic tail

Plasma and field data from the ISEE-3 space probe provide evidence that the lobe-plasma sheet boundary is the central part of the distant geomagnetic tail is often a slow-mode shock. Such shocks are predicted by Petchek's (1964) model of the reconnection. If this model applies, then the ISEE-3 observations place the general location of the reconnection diffusion region closer to the earth than x of about -100 earth radii.

Feldman, W. C.↗

Slow opening valve

A valve control is described having a valve body with an actuator stem and a rotating handle connected to the actuator stem by a differential drive mechanism which, during uniform movement of the handle in one direction, initially opens the valve at a relatively slow rate and, thereafter, complete the valve movement at a substantially faster rate. A series of stop rings are received about the body in frictional abutting relationship and serially rotated by the handle to uniformly resist handle movement independently of the extent of handle movement.

Drapeau, D. F.↗